Return to Question

added 416 characters in body

Source Link

edited Oct 17, 2015 at 14:07

105.9k
5
82
139

int timesTosend=1;
int count=0;
char phone_no[]="+917771914436";
void setup()
{
  Serial.begin(9600);
  delay(2000);
  Serial.println("AT+CMGF=1");
  delay(200);
}
void loop()
{
  while (count<timesTosend)
  {
    delay(1500);
    Serial.print("AT+CMGS=\"");
    Serial.print(phone_no);
    Serial.println("\"");
    while(Serial.read()!='>');
    {
      Serial.print("Hii If this message is sent then its a huge sucess for me");
      delay(500);
      Serial.write(0x1A);
      Serial.write(0x0D);
      Serial.write(0x0A);
      delay(5000);
    }
    count++;
  }
}

int count=0; char phone_no[]="+917771914436"; void setup() { Serial.begin(9600); delay(2000); Serial.println("AT+CMGF=1"); delay(200); } void loop() { while (count<timesTosend) { delay(1500); Serial.print("AT+CMGS=""); Serial.print(phone_no); Serial.println("""); while(Serial.read()!='>'); { Serial.print("Hii If this message is sent then its a huge sucess for me"); delay(500); Serial.write(0x1A); Serial.write(0x0D); Serial.write(0x0A); delay(5000); } count++; } }

#include <SoftwareSerial.h>
#include <TinyGPS.h>
 
long lat,lon; // create variable for latitude and longitude object
 
SoftwareSerial gpsSerial(4, 3); // create gps sensor connection
TinyGPS gps; // create gps object
 
void setup(){
  Serial.begin(9600); // connect serial
  gpsSerial.begin(9600); // connect gps sensor
}
 
void loop(){
  while(gpsSerial.available()){ // check for gps data
   if(gps.encode(gpsSerial.read())){ // encode gps data
    gps.get_position(&lat,&lon); // get latitude and longitude
    // display position
    Serial.print("Position: ");
    Serial.print("lat: ");Serial.print(lat);Serial.print(" ");// print latitude
    Serial.print("lon: ");Serial.println(lon); // print longitude
   }
  }
}

#include <TinyGPS.h>

long lat,lon; // create variable for latitude and longitude object

SoftwareSerial gpsSerial(4, 3); // create gps sensor connection TinyGPS gps; // create gps object

void setup(){ Serial.begin(9600); // connect serial gpsSerial.begin(9600); // connect gps sensor }

void loop(){ while(gpsSerial.available()){ // check for gps data if(gps.encode(gpsSerial.read())){ // encode gps data gps.get_position(&lat,&lon); // get latitude and longitude // display position Serial.print("Position: "); Serial.print("lat: ");Serial.print(lat);Serial.print(" ");// print latitude Serial.print("lon: ");Serial.println(lon); // print longitude } } }

My code which is not working--

#include <SoftwareSerial.h>
#include <TinyGPS.h>
long lat,lon; // create variable for latitude and longitude object
 
SoftwareSerial gpsSerial(4, 3); // create gps sensor connection
TinyGPS gps; // create gps object
 
void setup()
{
  Serial.begin(9600); // connect serial
  gpsSerial.begin(9600); // connect gps sensor
    Serial.begin(9600);
  delay(2000);
  Serial.println("AT+CMGF=1");
  delay(200);
}

int timesTosend=1;
int count=0;
char phone_no[]="+917771914436";
void loop()
{
  while (count<timesTosend)
  {
    delay(1500);
    Serial.print("AT+CMGS=\"");
    Serial.print(phone_no);
    Serial.println("\"");
     while(Serial.read()!='>');
    {
      while(gpsSerial.available())
      {
        if(gps.encode(gpsSerial.read()))
        { // encode gps data
    gps.get_position(&lat,&lon); // get latitude and longitude
    Serial.print(lat,lon);
      delay(500);
      Serial.write(0x1A);
      Serial.write(0x0D);
      Serial.write(0x0A);
      delay(5000);
        }
      }
    }
    count++;
  }
}

#include <TinyGPS.h> long lat,lon; // create variable for latitude and longitude object

SoftwareSerial gpsSerial(4, 3); // create gps sensor connection TinyGPS gps; // create gps object

void setup() { Serial.begin(9600); // connect serial gpsSerial.begin(9600); // connect gps sensor Serial.begin(9600); delay(2000); Serial.println("AT+CMGF=1"); delay(200); }

int timesTosend=1; int count=0; char phone_no[]="+917771914436"; void loop() { while (count<timesTosend) { delay(1500); Serial.print("AT+CMGS=""); Serial.print(phone_no); Serial.println("""); while(Serial.read()!='>'); { while(gpsSerial.available()) { if(gps.encode(gpsSerial.read())) { // encode gps data gps.get_position(&lat,&lon); // get latitude and longitude Serial.print(lat,lon); delay(500); Serial.write(0x1A); Serial.write(0x0D); Serial.write(0x0A); delay(5000); } } } count++; } }

int timesTosend=1;

#include <SoftwareSerial.h>

#include <TinyGPS.h>

long lat,lon; // create variable for latitude and longitude object

SoftwareSerial gpsSerial(4, 3); // create gps sensor connection TinyGPS gps; // create gps object

void setup(){ Serial.begin(9600); // connect serial gpsSerial.begin(9600); // connect gps sensor }

My code which is not working--

#include <SoftwareSerial.h>

#include <TinyGPS.h> long lat,lon; // create variable for latitude and longitude object

SoftwareSerial gpsSerial(4, 3); // create gps sensor connection TinyGPS gps; // create gps object

void setup() { Serial.begin(9600); // connect serial gpsSerial.begin(9600); // connect gps sensor Serial.begin(9600); delay(2000); Serial.println("AT+CMGF=1"); delay(200); }

int timesTosend=1;
int count=0;
char phone_no[]="+917771914436";
void setup()
{
  Serial.begin(9600);
  delay(2000);
  Serial.println("AT+CMGF=1");
  delay(200);
}
void loop()
{
  while (count<timesTosend)
  {
    delay(1500);
    Serial.print("AT+CMGS=\"");
    Serial.print(phone_no);
    Serial.println("\"");
    while(Serial.read()!='>');
    {
      Serial.print("Hii If this message is sent then its a huge sucess for me");
      delay(500);
      Serial.write(0x1A);
      Serial.write(0x0D);
      Serial.write(0x0A);
      delay(5000);
    }
    count++;
  }
}

#include <SoftwareSerial.h>
#include <TinyGPS.h>
 
long lat,lon; // create variable for latitude and longitude object
 
SoftwareSerial gpsSerial(4, 3); // create gps sensor connection
TinyGPS gps; // create gps object
 
void setup(){
  Serial.begin(9600); // connect serial
  gpsSerial.begin(9600); // connect gps sensor
}
 
void loop(){
  while(gpsSerial.available()){ // check for gps data
   if(gps.encode(gpsSerial.read())){ // encode gps data
    gps.get_position(&lat,&lon); // get latitude and longitude
    // display position
    Serial.print("Position: ");
    Serial.print("lat: ");Serial.print(lat);Serial.print(" ");// print latitude
    Serial.print("lon: ");Serial.println(lon); // print longitude
   }
  }
}

My code which is not working--

#include <SoftwareSerial.h>
#include <TinyGPS.h>
long lat,lon; // create variable for latitude and longitude object
 
SoftwareSerial gpsSerial(4, 3); // create gps sensor connection
TinyGPS gps; // create gps object
 
void setup()
{
  Serial.begin(9600); // connect serial
  gpsSerial.begin(9600); // connect gps sensor
    Serial.begin(9600);
  delay(2000);
  Serial.println("AT+CMGF=1");
  delay(200);
}

int timesTosend=1;
int count=0;
char phone_no[]="+917771914436";
void loop()
{
  while (count<timesTosend)
  {
    delay(1500);
    Serial.print("AT+CMGS=\"");
    Serial.print(phone_no);
    Serial.println("\"");
     while(Serial.read()!='>');
    {
      while(gpsSerial.available())
      {
        if(gps.encode(gpsSerial.read()))
        { // encode gps data
    gps.get_position(&lat,&lon); // get latitude and longitude
    Serial.print(lat,lon);
      delay(500);
      Serial.write(0x1A);
      Serial.write(0x0D);
      Serial.write(0x0A);
      delay(5000);
        }
      }
    }
    count++;
  }
}

Source Link

asked Oct 17, 2015 at 14:05

Tanishq Jaiswal

Problem in receieving message

I'm working on a project in which when I press reset button the arduino should send longitudes and latitudes to my phone. I'm a beginner and tried to join two codes, first code can send the message and the second code can get the lon and lat printed on the serial monitor.

First code--

int timesTosend=1;

Second code--

#include <SoftwareSerial.h>

#include <TinyGPS.h>

long lat,lon; // create variable for latitude and longitude object

SoftwareSerial gpsSerial(4, 3); // create gps sensor connection TinyGPS gps; // create gps object

void setup(){ Serial.begin(9600); // connect serial gpsSerial.begin(9600); // connect gps sensor }

My code which is not working--

#include <SoftwareSerial.h>

#include <TinyGPS.h> long lat,lon; // create variable for latitude and longitude object

SoftwareSerial gpsSerial(4, 3); // create gps sensor connection TinyGPS gps; // create gps object

void setup() { Serial.begin(9600); // connect serial gpsSerial.begin(9600); // connect gps sensor Serial.begin(9600); delay(2000); Serial.println("AT+CMGF=1"); delay(200); }

Please help me out by correcting my mistake in the code.