I'm using this simple code

#include <Bridge.h>
#include <YunServer.h>
#include <YunClient.h>

YunServer server;

void setup() {
  Serial.begin(9600);
  Bridge.begin();
  server.listenOnLocalhost();
  server.begin();
}

void loop() {
  YunClient client = server.accept();
  if (client) {
    Serial.println("client");
    process(client);
    client.stop();
   } else {
     Serial.println("no client");
   }
   delay(50); 
}

void process(YunClient client) {
  String command = client.readStringUntil('/');
  Serial.println(command);
  if (command == "turnLeft") {
    Serial.println("Gira a sinistra");
  }
  if (command == "turnRight") {
    Serial.println("Gira a destra");
  }
  if (command == "goTo") {
    String value = client.readStringUntil('/goTo/');
    Serial.println(value);
  }
}

but it seems to have problem with bridge (or server, or client, i cannot understand) because it only write "no client" on the serial.

I can not understand what is wrong.

Thanks a lot!

I'm using this simple code

#include <Bridge.h>
#include <YunServer.h>
#include <YunClient.h>

YunServer server;

void setup() {
  Serial.begin(9600);
  Bridge.begin();
  server.listenOnLocalhost();
  server.begin();
}

void loop() {
  YunClient client = server.accept();
  if (client) {
    Serial.println("client");
    process(client);
    client.stop();
   } else {
     Serial.println("no client");
   }
   delay(50); 
}

void process(YunClient client) {
  String command = client.readStringUntil('/');
  Serial.println(command);
  if (command == "turnLeft") {
    Serial.println("Gira a sinistra");
  }
  if (command == "turnRight") {
    Serial.println("Gira a destra");
  }
  if (command == "goTo") {
    String value = client.readStringUntil('/goTo/');
    Serial.println(value);
  }
}

but it seems to have problem with bridge (or server, or client, i cannot understand) because it only write "no client" on the serial.

I can not understand what is wrong.