| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource
Pull clocksource/event changes from Daniel Lezcano:
- Use 64-bits for timer compensation for IoT usage where the suspend
time is much longer than what 32-bits can provide (Enlin Mu)
- Add delay support on sp804 for ARM32 platforms (Stephen Eta Zhou)
- Fix missing resource release on error in the probe path of in the
ralink driver (Haotian Zhang)
- Fix double deregistration on probe failure in the NXP STM driver
(Johan Hovold)
- Disable runtime PM for the Renesas SH CMT timer because it is
incompatible with PREEMPT_RT=y (Niklas Söderlund)
- Fix section mismatches in the NXP STM driver (Johan Hovold)
- Preventing unbinding the NXP PIT, STM and MMIO ARM Arch timers as
the code does not suppport bind/unbind (Johan Hovold)
- Use the clocksource instead of ticks on the RDA8810PL platform
(Enlin Mu)
- Drop the unused module alias for the STM32-LP (Johan Hovold)
- Add Realtek system timer driver (Hao-Wen Ting)
Link: https://lore.kernel.org/all/9303b790-28d4-4bd9-b01d-28fb05493596@linaro.org
|
|
Add a system timer driver for Realtek SoCs.
This driver registers the 1 MHz global hardware counter on Realtek
platforms as a clock event device. Since this hardware counter starts
counting automatically after SoC power-on, no clock initialization is
required. Because the counter does not stop or get affected by CPU power
down, and it supports oneshot mode, it is typically used as a tick
broadcast timer.
Signed-off-by: Hao-Wen Ting <haowen.ting@realtek.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251126060110.198330-3-haowen.ting@realtek.com
|
|
The Realtek SYSTIMER (System Timer) is a 64-bit global hardware counter
operating at a fixed 1MHz frequency. Thanks to its compare match
interrupt capability, the timer natively supports oneshot mode for tick
broadcast functionality.
Signed-off-by: Hao-Wen Ting <haowen.ting@realtek.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251126060110.198330-2-haowen.ting@realtek.com
|
|
The driver cannot be built as a module so drop the unused platform
module alias.
Note that platform aliases are not needed for OF probing should it ever
become possible to build the driver as a module.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251111154516.1698-1-johan@kernel.org
|
|
The current system log timestamp accuracy is tick based, which can not
meet the usage requirements and needs to reach nanoseconds.
Therefore, the sched_clock_register function needs to be added.
[ dlezcano: Fixed typos ]
Signed-off-by: Enlin Mu <enlin.mu@unisoc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251107063347.3692-1-enlin.mu@linux.dev
|
|
Clockevents cannot be deregistered so suppress the bind attributes to
prevent the driver from being unbound and releasing the underlying
resources after registration.
Even if the driver can currently only be built-in, also switch to
builtin_platform_driver() to prevent it from being unloaded should
modular builds ever be enabled.
Fixes: cec32ac75827 ("clocksource/drivers/nxp-timer: Add the System Timer Module for the s32gx platforms")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251111153226.579-4-johan@kernel.org
|
|
The driver does not support unbinding (e.g. as clockevents cannot be
deregistered) so suppress the bind attributes to prevent the driver from
being unbound and rebound after registration (and disabling the timer
when reprobing fails).
Even if the driver can currently only be built-in, also switch to
builtin_platform_driver() to prevent it from being unloaded should
modular builds ever be enabled.
Fixes: bee33f22d7c3 ("clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251111153226.579-3-johan@kernel.org
|
|
Clockevents cannot be deregistered so suppress the bind attributes to
prevent the driver from being unbound and releasing the underlying
resources after registration.
Fixes: 4891f01527bb ("clocksource/drivers/arm_arch_timer: Add standalone MMIO driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20251111153226.579-2-johan@kernel.org
|
|
Platform drivers can be probed after their init sections have been
discarded (e.g. on probe deferral or manual rebind through sysfs) so the
probe function must not live in init. Device managed resource actions
similarly cannot be discarded.
The "_probe" suffix of the driver structure name prevents modpost from
warning about this so replace it to catch any similar future issues.
Fixes: cec32ac75827 ("clocksource/drivers/nxp-timer: Add the System Timer Module for the s32gx platforms")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: stable@vger.kernel.org # 6.16
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251017054943.7195-1-johan@kernel.org
|
|
The CMT device can be used as both a clocksource and a clockevent
provider. The driver tries to be smart and power itself on and off, as
well as enabling and disabling its clock when it's not in operation.
This behavior is slightly altered if the CMT is used as an early
platform device in which case the device is left powered on after probe,
but the clock is still enabled and disabled at runtime.
This has worked for a long time, but recent improvements in PREEMPT_RT
and PROVE_LOCKING have highlighted an issue. As the CMT registers itself
as a clockevent provider, clockevents_register_device(), it needs to use
raw spinlocks internally as this is the context of which the clockevent
framework interacts with the CMT driver. However in the context of
holding a raw spinlock the CMT driver can't really manage its power
state or clock with calls to pm_runtime_*() and clk_*() as these calls
end up in other platform drivers using regular spinlocks to control
power and clocks.
This mix of spinlock contexts trips a lockdep warning.
=============================
[ BUG: Invalid wait context ]
6.17.0-rc3-arm64-renesas-03071-gb3c4f4122b28-dirty #21 Not tainted
-----------------------------
swapper/1/0 is trying to lock:
ffff00000898d180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88
ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0
other info that might help us debug this:
ccree e6601000.crypto: ARM ccree device initialized
context-{5:5}
2 locks held by swapper/1/0:
#0: ffff80008173c298 (tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8
#1: ffff0000089a5858 (&ch->lock){....}-{2:2}
usbcore: registered new interface driver usbhid
, at: sh_cmt_start+0x30/0x364
stack backtrace:
CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.17.0-rc3-arm64-renesas-03071-gb3c4f4122b28-dirty #21 PREEMPT
Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
Call trace:
show_stack+0x14/0x1c (C)
dump_stack_lvl+0x6c/0x90
dump_stack+0x14/0x1c
__lock_acquire+0x904/0x1584
lock_acquire+0x220/0x34c
_raw_spin_lock_irqsave+0x58/0x80
__pm_runtime_resume+0x38/0x88
sh_cmt_start+0x54/0x364
sh_cmt_clock_event_set_oneshot+0x64/0xb8
clockevents_switch_state+0xfc/0x13c
tick_broadcast_set_event+0x30/0xa4
__tick_broadcast_oneshot_control+0x1e0/0x3a8
tick_broadcast_oneshot_control+0x30/0x40
cpuidle_enter_state+0x40c/0x680
cpuidle_enter+0x30/0x40
do_idle+0x1f4/0x26c
cpu_startup_entry+0x34/0x40
secondary_start_kernel+0x11c/0x13c
__secondary_switched+0x74/0x78
For non-PREEMPT_RT builds this is not really an issue, but for
PREEMPT_RT builds where normal spinlocks can sleep this might be an
issue. Be cautious and always leave the power and clock running after
probe.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251016182022.1837417-1-niklas.soderlund+renesas@ragnatech.se
|
|
The purpose of the devm_add_action_or_reset() helper is to call the
action function in case adding an action ever fails so drop the clock
source deregistration from the error path to avoid deregistering twice.
Fixes: cec32ac75827 ("clocksource/drivers/nxp-timer: Add the System Timer Module for the s32gx platforms")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251017055039.7307-1-johan@kernel.org
|
|
The ralink_systick_init() function does not release all acquired resources
on its error paths. If irq_of_parse_and_map() or a subsequent call fails,
the previously created I/O memory mapping and IRQ mapping are leaked.
Add goto-based error handling labels to ensure that all allocated
resources are correctly freed.
Fixes: 1f2acc5a8a0a ("MIPS: ralink: Add support for systick timer found on newer ralink SoC")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251030090710.1603-1-vulab@iscas.ac.cn
|
|
source is not registered
Register a valid read_current_timer() function for the
SP804 timer on ARM32.
On ARM32 platforms, when the SP804 timer is selected as the clocksource,
the driver does not register a valid read_current_timer() function.
As a result, features that rely on this API—such as rdseed—consistently
return incorrect values.
To fix this, a delay_timer structure is registered during the SP804
driver's initialization. The read_current_timer() function is implemented
using the existing sp804_read() logic, and the timer frequency is reused
from the already-initialized clocksource.
Signed-off-by: Stephen Eta Zhou <stephen.eta.zhou@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20250525-sp804-fix-read_current_timer-v4-1-87a9201fa4ec@gmail.com
|
|
64 bit
Using 32 bit for suspend compensation, the max compensation time is 36
hours(working clock is 32k).In some IOT devices, the suspend time may
be long, even exceeding 36 hours. Therefore, a 64 bit timer counter
is needed for counting.
Signed-off-by: Enlin Mu <enlin.mu@unisoc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://patch.msgid.link/20251106021830.34846-1-enlin.mu@linux.dev
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: usb: hdm_probe: Fix calling put_device() before device initialization
most: usb: Fix use-after-free in hdm_disconnect
binder: remove "invalid inc weak" check
mei: txe: fix initialization order
comedi: fix divide-by-zero in comedi_buf_munge()
mei: late_bind: Fix -Wincompatible-function-pointer-types-strict
misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup
mei: me: add wildcat lake P DID
misc: amd-sbi: Clarify that this is a BMC driver
nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE
binder: Fix missing kernel-doc entries in binder.c
rust_binder: report freeze notification only when fully frozen
rust_binder: don't delete FreezeListener if there are pending duplicates
rust_binder: freeze_notif_done should resend if wrong state
rust_binder: remove warning about orphan mappings
rust_binder: clean `clippy::mem_replace_with_default` warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix device reference leak in fmh_gpib driver
staging: gpib: Return -EINTR on device clear
staging: gpib: Fix sending clear and trigger events
staging: gpib: Fix no EOI on 1 and 2 byte writes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Remove dead code leftovers after a recent mitigations cleanup which
fail a Clang build
- Make sure a Retbleed mitigation message is printed only when
necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256
check is needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which
supports assignable counters but where L3 total and local bandwidth
monitoring has been disabled at boot
* tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove dead code which might prevent from building
x86/bugs: Qualify RETBLEED_INTEL_MSG
x86/microcode: Fix Entrysign revision check for Zen1/Naples
x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework
* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Fix x32 build due to wrong format specifier on that sub-arch
- Add one more Rust noreturn function to objtool's list
* tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix failure when being compiled on x32 system
objtool/rust: add one more `noreturn` Rust function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Make sure a CFS runqueue on a throttled hierarchy has its PELT clock
throttled otherwise task movement and manipulation would lead to
dangling cfs_rq references and an eventual crash
* tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Start a cfs_rq on throttled hierarchy with PELT clock throttled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Do not create more than eight (max supported) AUX clocks sysfs
hierarchies
* tag 'timers_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix aux clocks sysfs initialization loop bound
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- In Device::parent(), do not make any assumptions on the device
context of the parent device
- Check visibility before changing ownership of a sysfs attribute
group
- In topology_parse_cpu_capacity(), replace an incorrect usage of
PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL()
- In devcoredump, fix a circular locking dependency between
struct devcd_entry::mutex and kernfs
- Do not warn about a pending fw_devlink sync state
* tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
rust: device: fix device context of Device::parent()
sysfs: check visibility before changing group attribute ownership
devcoredump: Fix circular locking dependency with devcd->mutex.
driver core: fw_devlink: Don't warn about sync_state() pending
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"A small collection of FireWire fixes. This includes corrections to
sparse and API documentation"
* tag 'firewire-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: init_ohci1394_dma: add missing function parameter documentation
firewire: core: fix __must_hold() annotation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Close a race during boot between userspace vDSO usage and some
late-initialized vDSO data
- Improve performance on systems with non-CPU-cache-coherent
DMA-capable peripherals by enabling write combining on
pgprot_dmacoherent() allocations
- Add human-readable detail for RISC-V IPI tracing
- Provide more information to zsmalloc on 64-bit RISC-V to improve
allocation
- Silence useless boot messages about CPUs that have been disabled in
DT
- Resolve some compiler and smatch warnings and remove a redundant
macro
* tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: hwprobe: avoid uninitialized variable use in hwprobe_arch_id()
riscv: cpufeature: avoid uninitialized variable in has_thead_homogeneous_vlenb()
riscv: hwprobe: Fix stale vDSO data for late-initialized keys at boot
riscv: add a forward declaration for cpuinfo_op
RISC-V: Don't print details of CPUs disabled in DT
riscv: Remove the PER_CPU_OFFSET_SHIFT macro
riscv: mm: Define MAX_POSSIBLE_PHYSMEM_BITS for zsmalloc
riscv: Register IPI IRQs with unique names
ACPI: RIMT: Fix unused function warnings when CONFIG_IOMMU_API is disabled
RISC-V: Define pgprot_dmacoherent() for non-coherent devices
|
|
Pull xfs fixes from Carlos Maiolino:
"The main highlight here is a fix for a bug brought in by the removal
of attr2 mount option, where some installations might actually have
'attr2' explicitly configured in fstab preventing system to boot by
not being able to remount the rootfs as RW.
Besides that there are a couple fix to the zonefs implementation,
changing XFS_ONLINE_SCRUB_STATS to depend on DEBUG_FS (was select
before), and some other minor changes"
* tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix locking in xchk_nlinks_collect_dir
xfs: loudly complain about defunct mount options
xfs: always warn about deprecated mount options
xfs: don't set bt_nr_sectors to a negative number
xfs: don't use __GFP_NOFAIL in xfs_init_fs_context
xfs: cache open zone in inode->i_private
xfs: avoid busy loops in GCD
xfs: XFS_ONLINE_SCRUB_STATS should depend on DEBUG_FS
xfs: do not tightly pack-write large files
xfs: Improve CONFIG_XFS_RT Kconfig help
|
|
Pull smb server fixes from Steve French:
"smbdirect (RDMA) fixes in order avoid potential submission queue
overflows:
- free transport teardown fix
- credit related fixes (five server related, one client related)"
* tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let free_transport() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: client: make use of smbdirect_socket.send_io.lcredits.*
smb: server: make use of smbdirect_socket.send_io.lcredits.*
smb: server: simplify sibling_list handling in smb_direct_flush_send_list/send_done
smb: server: smb_direct_disconnect_rdma_connection() already wakes all waiters on error
smb: smbdirect: introduce smbdirect_socket.send_io.lcredits.*
smb: server: allocate enough space for RW WRs and ib_drain_qp()
|
|
Clang is not happy with set but unused variable (this is visible
with `make W=1` build:
kernel/sched/sched.h:3744:18: error: variable 'cpumask' set but not used [-Werror,-Wunused-but-set-variable]
It seems like the variable was never used along with the assignment
that does not have side effects as far as I can see. Remove those
altogether.
Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull drm fixes from Simona Vetter:
"Very quiet, all just small stuff and nothing scary pending to my
knowledge:
- drm_panic: bunch of size calculation fixes
- pantor: fix kernel panic on partial gpu va unmap
- rockchip: hdmi hotplug setup fix
- amdgpu: dp mst, dc/display fixes
- i915: fix panic structure leak
- xe: madvise uapi fix, wq alloc error, vma flag handling fix"
* tag 'drm-fixes-2025-10-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Check return value of GGTT workqueue allocation
drm/amd/display: use GFP_NOWAIT for allocation in interrupt handler
drm/amd/display: increase max link count and fix link->enc NULL pointer access
drm/amd/display: Fix NULL pointer dereference
drm/panic: Fix 24bit pixel crossing page boundaries
drm/panic: Fix divide by 0 if the screen width < font width
drm/panic: Fix kmsg text drawing rectangle
drm/panic: Fix qr_code, ensure vmargin is positive
drm/panic: Fix overlap between qr code and logo
drm/panic: Fix drawing the logo on a small narrow screen
drm/xe/uapi: Hide the madvise autoreset behind a VM_BIND flag
drm/xe: Retain vma flags when recreating and splitting vmas for madvise
drm/i915/panic: fix panic structure allocation memory leak
drm/panthor: Fix kernel panic on partial unmap of a GPU VA region
drm/rockchip: dw_hdmi: use correct SCLIN mask for RK3228
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add DWC custom pci_ops for the root bus instead of overwriting the
DBI base address, which broke drivers that rely on the DBI address
for iATU programming; fixes an FU740 probe regression (Krishna
Chaitanya Chundru)
- Revert qcom ECAM enablement, which is rendered unnecessary by the DWC
custom pci_ops (Krishna Chaitanya Chundru)
- Fix longstanding MIPS Malta resource registration issues to avoid
exposing them when the next commit fixes the boot failure (Maciej W.
Rozycki)
- Use pcibios_align_resource() on MIPS Malta to fix boot failure caused
by using the generic pci_enable_resources() (Ilpo Järvinen)
- Enable only ASPM L0s and L1, not L1 PM Substates, for devicetree
platforms because we lack information required to configure L1
Substates; fixes regressions on powerpc and rockchip. A qcom
regression (L1 Substates no longer enabled) remains and will be
addressed next (Bjorn Helgaas)
* tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Enable only L0s and L1 for devicetree platforms
MIPS: Malta: Use pcibios_align_resource() to block io range
MIPS: Malta: Fix PCI southbridge legacy resource reservations
MIPS: Malta: Fix keyboard resource preventing i8042 driver from registering
Revert "PCI: qcom: Prepare for the DWC ECAM enablement"
PCI: dwc: Use custom pci_ops for root bus DBI vs ECAM config access
|
|
Add missing kernel-doc parameter descriptions for five functions
in init_ohci1394_dma.c to fix documentation warnings when building
with W=1.
This patch addresses the following warnings:
- init_ohci1394_wait_for_busresets: missing @ohci description
- init_ohci1394_enable_physical_dma: missing @ohci description
- init_ohci1394_reset_and_init_dma: missing @ohci description
- init_ohci1394_controller: missing @num, @slot, @func descriptions
- setup_ohci1394_dma: missing @opt description
Tested with GCC 13.2.0 and W=1 flag. All documentation warnings
for these functions have been resolved.
Signed-off-by: Nirbhay Sharma <nirbhay.lkd@gmail.com>
Link: https://lore.kernel.org/r/20251024203219.101990-2-nirbhay.lkd@gmail.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Avoid some false-positive KMSAN warnings by restoring the dependency
of the architecture-optimized Poly1305 code on !KMSAN"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: poly1305: Restore dependency of arch code on !KMSAN
|
|
Pull smb client fixes from Steve French:
- add missing tracepoints
- smbdirect (RDMA) fix
- fix potential issue with credits underflow
- rename fix
- improvement to calc_signature and additional cleanup patch
* tag '6.18-rc2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: #include cifsglob.h before trace.h to allow structs in tracepoints
cifs: Call the calc_signature functions directly
smb: client: get rid of d_drop() in cifs_do_rename()
cifs: Fix TCP_Server_Info::credits to be signed
cifs: Add a couple of missing smb3_rw_credits tracepoints
smb: client: allocate enough space for MR WRs and ib_drain_qp()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix dma alignment for PI
- Fix selinux bogosity with nbd, where sendmsg would get rejected
* tag 'block-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: require LBA dma_alignment when using PI
nbd: override creds to kernel when calling sock_{send,recv}msg()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Add MAINTAINERS entry for zcrx, mostly so that netdev gets
automatically CC'ed by default on any changes there too.
- Fix for the SQPOLL busy vs work time accounting.
It was using getrusage(), which was both broken from a thread point
of view (we only care about the SQPOLL thread itself), and vastly
overkill as only the systime was used. On top of that, also be a bit
smarter in when it's queried. It used excessive CPU before this
change. Marked for stable as well.
- Fix provided ring buffer auto commit for uring_cmd.
- Fix a few style issues and sparse annotation for a lock.
* tag 'io_uring-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix buffer auto-commit for multishot uring_cmd
io_uring: correct __must_hold annotation in io_install_fixed_file
io_uring zcrx: add MAINTAINERS entry
io_uring: Fix code indentation error
io_uring/sqpoll: be smarter on when to update the stime usage
io_uring/sqpoll: switch away from getrusage() for CPU accounting
io_uring: fix incorrect unlikely() usage in io_waitid_prep()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Two fixes for race conditions in obj_exts allocation (Hao Ge)
- Fix for slab accounting imbalance due to deferred slab decativation
(Vlastimil Babka)
* tag 'slab-for-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: Fix obj_ext mistakenly considered NULL due to race condition
slab: fix slab accounting imbalance due to defer_deactivate_slab()
slab: Avoid race on slab->obj_exts in alloc_slab_obj_exts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix handling of GICv5 ITS MSI properties on platforms with
'msi-parent' as well as a of_node refcounting fix.
This is also preparation for further refactoring in 6.19 to use
common DT parsing of MSI properties.
* tag 'devicetree-fixes-for-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Export of_msi_xlate() for module usage
of/irq: Fix OF node refcount in of_msi_get_domain()
of/irq: Add msi-parent check to of_msi_xlate()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main change this time is an update to the MAINTAINERS file,
listing Krzysztof Kozlowski, Alexandre Belloni, and Linus Walleij as
additional maintainers for the SoC tree, in order to go back to a
group maintainership. Drew Fustini joins as an additional reviewer for
the SoC tree.
Thanks to all of you for volunteering to help out.
On the actual bugfixes, we have a few correctness changes for firmware
drivers (qtee, arm-ffa, scmi) and two devicetree fixes for Raspberry
Pi"
* tag 'soc-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: officially expand maintainership team
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
ARM: dts: broadcom: rpi: Switch to V3D firmware clock
arm64: dts: broadcom: bcm2712: Define VGIC interrupt
firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
tee: QCOMTEE should depend on ARCH_QCOM
tee: qcom: return -EFAULT instead of -EINVAL if copy_from_user() fails
tee: qcom: prevent potential off by one read
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- cgbc-hwmon: Add missing NULL check after devm_kzalloc
- gpd-fan: Fix error handling
- pmbus/isl68137: Fix child node reference leak
- pmbus/max34440: Update adpm12160 coefficients to match latest FW
- sht3x: Fix error handling
* tag 'hwmon-for-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (sht3x) Fix error handling
hwmon: (cgbc-hwmon) Add missing NULL check after devm_kzalloc()
hwmon: (pmbus/isl68137) Fix child node reference leak on early return
hwmon: (gpd-fan) Fix error handling in gpd_fan_probe()
hwmon: (gpd-fan) Fix return value when platform_get_resource() fails
hwmon: (pmbus/max34440) Update adpm12160 coeff due to latest FW
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices"
* tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spi-rockchip: Add RK3506 compatible
spi: intel-pci: Add support for Intel Wildcat Lake SPI serial flash
spi: intel-pci: Add support for Arrow Lake-H SPI serial flash
spi: intel: Add support for 128M component density
spi: airoha: fix reading/writing of flashes with more than one plane per lun
spi: airoha: switch back to non-dma mode in the case of error
spi: airoha: add support of dual/quad wires spi modes to exec_op() handler
spi: airoha: return an error for continuous mode dirmap creation cases
spi: amlogic: fix spifc build error
spi: cadence-quadspi: Fix pm_runtime unbalance on dma EPROBE_DEFER
spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection
spi: spi-nxp-fspi: add extra delay after dll locked
spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate
spi: dw-mmio: add error handling for reset_control_deassert()
spi: rockchip-sfc: Fix DMA-API usage
spi: dt-bindings: cadence: add soc-specific compatible strings for zynqmp and versal-net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix regressions in regmap cache initialization in gpio-104-idio-16
and gpio-pci-idio-16
- configure first 16 GPIO lines of the IDIO-16 as fixed outputs
- fix duplicated IRQ mapping that can lead to an RCU stall in gpio-ljca
- fix printf formatters passed to dev_err() and make failure to set
debounce period non fatal
* tag 'gpio-fixes-for-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ljca: Fix duplicated IRQ mapping
gpiolib: acpi: Use %pe when passing an error pointer to dev_err()
gpiolib: acpi: Make set debounce errors non fatal
gpio: idio-16: Define fixed direction of the GPIO lines
gpio: regmap: add the .fixed_direction_output configuration parameter
gpio: pci-idio-16: Define maximum valid register address offset
gpio: 104-idio-16: Define maximum valid register address offset
|
|
Since Olof moved on from the soc tree maintenance, Arnd has mainly taken
care of the day-to-day activities around the SoC tree by himself, which
is generally not a good setup.
Krzysztof, Linus and Alexandre have volunteered to become co-maintainers
of the SoC tree, with the plan of taking turns to do merges and reviews
to spread the workload. In addition, Drew joins as another reviewer.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Clang, in particular, is not happy about dead code:
arch/x86/kernel/cpu/bugs.c:1830:20: error: unused function 'match_option' [-Werror,-Wunused-function]
1830 | static inline bool match_option(const char *arg, int arglen, const char *opt)
| ^~~~~~~~~~~~
1 error generated.
Remove a leftover from the previous cleanup.
Fixes: 02ac6cc8c5a1 ("x86/bugs: Simplify SSB cmdline parsing")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20251024125959.1526277-1-andriy.shevchenko%40linux.intel.com
|
|
of_msi_xlate() is required by drivers that can be configured
as modular, export the symbol.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: Rob Herring <robh@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251021124103.198419-4-lpieralisi@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial device ids for 6.18-rc3
Here are some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.18-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
USB: serial: option: add UNISOC UIS7720
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Make madvise autoreset an explicit behavior requested by userspace
(Thomas Hellström)
Driver Changes:
- Drop XE_VMA flag conversion and ensure GPUVA flags are passed around
(homas Hellström)
- Fix missing wq allocation error checking (Matthew Brost)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/4p2glnvgifc6osjlvzv23xhsyqhw4diqlfxz54lmg7robv44bi@nwd37zpqfa2l
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix panic structure allocation memory leak (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aPojgsvNYOU0tN4U@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
panic:
- Fix several issues in size calculations
panthor:
- Fix kernel panic on partial unmap of GPU VA region
rockchip:
- hdmi: Fix HDP setup
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20251023083449.GA13190@linux-2.fritz.box
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.18-2025-10-22:
amdgpu:
- DP MST fix
- Fix DC max link count
- DC interrupt atomic context fix
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20251022222005.1787211-1-alexander.deucher@amd.com
|
|
If two competing threads enter alloc_slab_obj_exts(), and the one that
allocates the vector wins the cmpxchg(), the other thread that failed
allocation mistakenly assumes that slab->obj_exts is still empty due to
its own allocation failure. This will then trigger warnings with
CONFIG_MEM_ALLOC_PROFILING_DEBUG checks in the subsequent free path.
Therefore, let's check the result of cmpxchg() to see if marking the
allocation as failed was successful. If it wasn't, check whether the
winning side has succeeded its allocation (it might have been also
marking it as failed) and if yes, return success.
Suggested-by: Harry Yoo <harry.yoo@oracle.com>
Fixes: f7381b911640 ("slab: mark slab->obj_exts allocation failures unconditionally")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Link: https://patch.msgid.link/20251023143313.1327968-1-hao.ge@linux.dev
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.
Fixes: bddd10c55407 ("genirq/manage: Rework enable_irq()")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251023154901.1333755-4-ckeepax@opensource.cirrus.com
|
|
The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.
Fixes: 1b7444446724 ("genirq/manage: Rework __disable_irq_nosync()")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251023154901.1333755-3-ckeepax@opensource.cirrus.com
|
|
The locking was changed from a buslock to a plain lock, but the patch
description states there was no functional change. Assuming this was
accidental so reverting to using the buslock.
Fixes: 5cd05f3e2315 ("genirq/chip: Rework irq_set_handler() variants")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251023154901.1333755-2-ckeepax@opensource.cirrus.com
|
|
Workqueue allocation can fail, so check the return value of the GGTT
workqueue allocation and fail driver initialization if the allocation
fails.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20251022005538.828980-2-matthew.brost@intel.com
(cherry picked from commit 1f1314e8e71385bae319e43082b798c11f6648bc)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
We should wait for the rdma_cm to become SMBDIRECT_SOCKET_DISCONNECTED!
At least on the client side (with similar code)
wait_event_interruptible() often returns with -ERESTARTSYS instead of
waiting for SMBDIRECT_SOCKET_DISCONNECTED.
We should use wait_event() here too, which makes the code be identical
in client and server, which will help when moving to common functions.
Fixes: b31606097de8 ("smb: server: move smb_direct_disconnect_rdma_work() into free_transport()")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Commit 620a50c92700 ("io_uring: uring_cmd: add multishot support") added
multishot uring_cmd support with explicit buffer upfront commit via
io_uring_mshot_cmd_post_cqe(). However, the buffer selection path in
io_ring_buffer_select() was auto-committing buffers for non-pollable files,
which conflicts with uring_cmd's explicit upfront commit model.
This way consumes the whole selected buffer immediately, and causes
failure on the following buffer selection.
Fix this by checking uring_cmd to identify operations that handle buffer
commit explicitly, and skip auto-commit for these operations.
Cc: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 620a50c92700 ("io_uring: uring_cmd: add multishot support")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
f3ac2ff14834 ("PCI/ASPM: Enable all ClockPM and ASPM states for devicetree
platforms") enabled Clock Power Management and L1 PM Substates, but those
features depend on CLKREQ# and possibly other device-specific
configuration. We don't know whether CLKREQ# is supported, so we shouldn't
blindly enable Clock PM and L1 PM Substates.
Enable only ASPM L0s and L1, and only when both ends of the link advertise
support for them.
Fixes: f3ac2ff14834 ("PCI/ASPM: Enable all ClockPM and ASPM states for devicetree platforms")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lore.kernel.org/r/db5c95a1-cf3e-46f9-8045-a1b04908051a@xenosoft.de/
Reported-by: FUKAUMI Naoki <naoki@radxa.com>
Closes: https://lore.kernel.org/r/22594781424C5C98+22cb5d61-19b1-4353-9818-3bb2b311da0b@radxa.com/
Reported-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20251015101304.3ec03e6b@bootlin.com/
Reported-by: Diederik de Haas <diederik@cknow-tech.com>
Closes: https://lore.kernel.org/r/DDJXHRIRGTW9.GYC2ULZ5WQAL@cknow-tech.com/
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Acked-by: Dragan Simic <dsimic@manjaro.org>
Link: https://patch.msgid.link/20251023180645.1304701-1-helgaas@kernel.org
|
|
The variable name passed to __must_hold() annotation is invalid.
This commit fixes it.
Fixes: 420bd7068cbf ("firewire: core: use spin lock specific to transaction")
Link: https://lore.kernel.org/r/20251023104349.415310-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Mark has been kindly helping fill in when I have been unavailable over
the past several years. He has also put his hand up to take over
linux-next maintenance when I finally decide to stop (which may be some
time yet ;-) ).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"A couple of fixes for Runtime Verification:
- A bug caused a kernel panic when reading enabled_monitors was
reported.
Change callback functions to always use list_head iterators and by
doing so, fix the wrong pointer that was leading to the panic.
- The rtapp/pagefault monitor relies on the MMU to be present
(pagefaults exist) but that was not enforced via kconfig, leading
to potential build errors on systems without an MMU.
Add that kconfig dependency"
* tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Make rtapp/pagefault monitor depends on CONFIG_MMU
rv: Fully convert enabled_monitors to use list_head as iterator
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.18, please pull the following:
- Peter describes the VGIC interrupt line such that KVM can be used on
Raspberry Pi 5 systems.
* tag 'arm-soc/for-6.18/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: Define VGIC interrupt
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.18, please pull the following:
- Stefan switches the V3D block to use the firmware clock, rather than
the bare metal clock. This fixes hangs on boot after recent changes to
the V3D driver clocking went in.
* tag 'arm-soc/for-6.18/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: rpi: Switch to V3D firmware clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.18
This series contains a set of small, focused fixes that address
robustness and lifecycle issues in the Arm SCMI core and debug support,
ensuring safer handling of debug initialization failures, correct flag
management in raw mode, and consistent inflight counter tracking.
Brief summary:
- Fix raw xfer flag clearing
- Skip RAW debug initialization on failure
- Make inflight counter helpers null-safe, preventing crashes if debug
initialization fails
- Account for failed debug initialization globally
There is no functional change for standard SCMI operation, but these
fixes improve stability in debug and raw modes, particularly in error
paths.
* tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.18
The FF-A driver was updated to support specification version 1.2 but omitted
support for the 16-byte implementation-defined (IMPDEF) field introduced in
FF-A v1.2 within the Endpoint Memory Access Descriptor (EMAD). This omission
breaks all memory interfaces.
This change updates the EMAD sizing and offset logic to correctly handle the
FF-A v1.2 layout while preserving backward compatibility with older versions.
* tag 'ffa-fix-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Do not make a clean PTE dirty in pte_mkwrite()
The Arm architecture, for backwards compatibility reasons (ARMv8.0
before in-hardware dirty bit management - DBM), uses the PTE_RDONLY
bit to mean !dirty while the PTE_WRITE bit means DBM enabled. The
arm64 pte_mkwrite() simply clears the PTE_RDONLY bit and this
inadvertently makes the PTE pte_hw_dirty(). Most places making a PTE
writable also invoke pte_mkdirty() but do_swap_page() does not and we
end up with dirty, freshly swapped in, writeable pages.
- Do not warn if the destination page is already MTE-tagged in
copy_highpage()
In the majority of the cases, a destination page copied into is
freshly allocated without the PG_mte_tagged flag set. However, the
folio migration may be restarted if __folio_migrate_mapping() failed,
triggering the benign WARN_ON_ONCE().
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
arm64, mm: avoid always making PTE dirty in pte_mkwrite()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a fallout of a recent ACPI properties management update and
work around a compiler bug in ACPICA:
- Fix a recent coding mistake causing __acpi_node_get_property_reference()
arguments to be put in an incorrect order (Sunil V L)
- Work around bogus -Wstringop-overread warning on LoongArch since
GCC 11 in ACPICA (Xi Ruoyao)"
* tag 'acpi-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Work around bogus -Wstringop-overread warning since GCC 11
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These revert a cpuidle menu governor commit leading to a performance
regression, fix an amd-pstate driver regression introduced recently,
and fix new conditional guard definitions for runtime PM.
- Add missing _RET == 0 condition to recently introduced conditional
guard definitions for runtime PM (Rafael Wysocki)
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)"
* tag 'pm-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix conditional guard definitions
Revert "cpuidle: menu: Avoid discarding useful information"
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in send, fix duplicated rmdir operations when using extrefs
(hardlinks), receive can fail with ENOENT
- fixup of error check when reading extent root in ref-verify and
damaged roots are allowed by mount option (found by smatch)
- fix freeing partially initialized fs info (found by syzkaller)
- fix use-after-free when printing ref_tracking status of delayed
inodes
* tag 'for-6.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ref-verify: fix IS_ERR() vs NULL check in btrfs_build_ref_tree()
btrfs: fix delayed_node ref_tracker use after free
btrfs: send: fix duplicated rmdir operations when using extrefs
btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots()
|
|
The arm64 copy_highpage() assumes that the destination page is newly
allocated and not MTE-tagged (PG_mte_tagged unset) and warns
accordingly. However, following commit 060913999d7a ("mm: migrate:
support poisoned recover from migrate folio"), folio_mc_copy() is called
before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the
copy will be done again to the same destination page. Since
copy_highpage() already set the PG_mte_tagged flag, this second copy
will warn.
Replace the WARN_ON_ONCE(page already tagged) in the arm64
copy_highpage() with a comment.
Reported-by: syzbot+d1974fc28545a3e6218b@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/68dda1ae.a00a0220.102ee.0065.GAE@google.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: stable@vger.kernel.org # 6.12.x
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Since commit af92793e52c3 ("slab: Introduce kmalloc_nolock() and
kfree_nolock().") there's a possibility in alloc_single_from_new_slab()
that we discard the newly allocated slab if we can't spin and we fail to
trylock. As a result we don't perform inc_slabs_node() later in the
function. Instead we perform a deferred deactivate_slab() which can
either put the unacounted slab on partial list, or discard it
immediately while performing dec_slabs_node(). Either way will cause an
accounting imbalance.
Fix this by not marking the slab as frozen, and using free_slab()
instead of deactivate_slab() for non-frozen slabs in
free_deferred_objects(). For CONFIG_SLUB_TINY, that's the only possible
case. By not using discard_slab() we avoid dec_slabs_node().
Fixes: af92793e52c3 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Link: https://patch.msgid.link/20251023-fix-slab-accounting-v2-1-0e62d50986ea@suse.cz
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Tariq Toukan says:
====================
mlx5 misc fixes 2025-10-22
This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
====================
Link: https://patch.msgid.link/1761136182-918470-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When we do mlx5e_detach_netdev() we eventually disable blocking events
notifier, among those events are IPsec MPV events from IB to core.
So before disabling those blocking events, make sure to also unregister
the devcom device and mark all this device operations as complete,
in order to prevent the other device from using invalid netdev
during future devcom events which could cause the trace below.
BUG: kernel NULL pointer dereference, address: 0000000000000010
PGD 146427067 P4D 146427067 PUD 146488067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 1 UID: 0 PID: 7735 Comm: devlink Tainted: GW 6.12.0-rc6_for_upstream_min_debug_2024_11_08_00_46 #1
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core]
Code: 00 01 48 83 05 23 32 1e 00 01 41 b8 ed ff ff ff e9 60 ff ff ff 48 83 05 00 32 1e 00 01 eb e3 66 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 47 10 48 83 05 5f 32 1e 00 01 48 8b 50 40 48 85 d2 74 05 40
RSP: 0018:ffff88811a5c35f8 EFLAGS: 00010206
RAX: ffff888106e8ab80 RBX: ffff888107d7e200 RCX: ffff88810d6f0a00
RDX: ffff88810d6f0a00 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffff88811a17e620 R08: 0000000000000040 R09: 0000000000000000
R10: ffff88811a5c3618 R11: 0000000de85d51bd R12: ffff88811a17e600
R13: ffff88810d6f0a00 R14: 0000000000000000 R15: ffff8881034bda80
FS: 00007f27bdf89180(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000010f159005 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core]
mlx5e_devcom_event_mpv+0x42/0x60 [mlx5_core]
mlx5_devcom_send_event+0x8c/0x170 [mlx5_core]
blocking_event+0x17b/0x230 [mlx5_core]
notifier_call_chain+0x35/0xa0
blocking_notifier_call_chain+0x3d/0x60
mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core]
mlx5_core_mp_event_replay+0x12/0x20 [mlx5_core]
mlx5_ib_bind_slave_port+0x228/0x2c0 [mlx5_ib]
mlx5_ib_stage_init_init+0x664/0x9d0 [mlx5_ib]
? idr_alloc_cyclic+0x50/0xb0
? __kmalloc_cache_noprof+0x167/0x340
? __kmalloc_noprof+0x1a7/0x430
__mlx5_ib_add+0x34/0xd0 [mlx5_ib]
mlx5r_probe+0xe9/0x310 [mlx5_ib]
? kernfs_add_one+0x107/0x150
? __mlx5_ib_add+0xd0/0xd0 [mlx5_ib]
auxiliary_bus_probe+0x3e/0x90
really_probe+0xc5/0x3a0
? driver_probe_device+0x90/0x90
__driver_probe_device+0x80/0x160
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
bus_for_each_drv+0x80/0xd0
__device_attach+0xbc/0x1f0
bus_probe_device+0x86/0xa0
device_add+0x62d/0x830
__auxiliary_device_add+0x3b/0xa0
? auxiliary_device_init+0x41/0x90
add_adev+0xd1/0x150 [mlx5_core]
mlx5_rescan_drivers_locked+0x21c/0x300 [mlx5_core]
esw_mode_change+0x6c/0xc0 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x21e/0x640 [mlx5_core]
devlink_nl_eswitch_set_doit+0x60/0xe0
genl_family_rcv_msg_doit+0xd0/0x120
genl_rcv_msg+0x180/0x2b0
? devlink_get_from_attrs_lock+0x170/0x170
? devlink_nl_eswitch_get_doit+0x290/0x290
? devlink_nl_pre_doit_port_optional+0x50/0x50
? genl_family_rcv_msg_dumpit+0xf0/0xf0
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1fc/0x2d0
netlink_sendmsg+0x1e4/0x410
__sock_sendmsg+0x38/0x60
? sockfd_lookup_light+0x12/0x60
__sys_sendto+0x105/0x160
? __sys_recvmsg+0x4e/0x90
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f27bc91b13a
Code: bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 8b 05 fa 96 2c 00 45 89 c9 4c 63 d1 48 63 ff 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 f3 c3 0f 1f 40 00 41 55 41 54 4d 89 c5 55
RSP: 002b:00007fff369557e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000009c54b10 RCX: 00007f27bc91b13a
RDX: 0000000000000038 RSI: 0000000009c54b10 RDI: 0000000000000006
RBP: 0000000009c54920 R08: 00007f27bd0030e0 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001
</TASK>
Modules linked in: mlx5_vdpa vringh vhost_iotlb vdpa xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi ib_umad scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_fwctl mlx5_ib ib_uverbs ib_core mlx5_core
CR2: 0000000000000010
Fixes: 82f9378c443c ("net/mlx5: Handle IPsec steering upon master unbind/bind")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761136182-918470-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Devcom device and component registration isn't always critical to the
functionality of the caller, hence the registration can fail and we can
continue working with an ERR_PTR value saved inside a variable.
In order to avoid that make sure all devcom failures return NULL.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761136182-918470-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check the PCAM supported registers mask before querying the PPHCR
register, as it is not supported in older devices.
Fixes: 44907e7c8fd0 ("net/mlx5e: Add logic to read RS-FEC histogram bin ranges from PPHCR")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761136182-918470-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the PPHCR bit to the port_access_reg_cap_mask field of PCAM
register to indicate that the device supports the PPHCR register
and the RS-FEC histogram feature.
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761136182-918470-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When GSO tunnel is negotiated virtio_net_hdr_tnl_from_skb() tries to
initialize the tunnel metadata but forget to zero unused rxhash
fields. This may leak information to another side. Fixing this by
zeroing the unused hash fields.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: a2fb4bc4e2a6a ("net: implement virtio helpers to handle UDP GSO tunneling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20251022034421.70244-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, during the LAN8814 PTP probe shared->phydev is only set if PTP
clock gets actually set, otherwise the function will return before setting
it.
This is an issue as shared->phydev is unconditionally being used when IRQ
is being handled, especially in lan8814_gpio_process_cap and since it was
not set it will cause a NULL pointer exception and crash the kernel.
So, simply always set shared->phydev to avoid the NULL pointer exception.
Fixes: b3f1a08fcf0d ("net: phy: micrel: Add support for PTP_PF_EXTTS for lan8814")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20251021132034.983936-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot reported a potential lock inversion deadlock between
vsock_register_mutex and sk_lock-AF_VSOCK when vsock_linger() is called.
The issue was introduced by commit 687aa0c5581b ("vsock: Fix
transport_* TOCTOU") which added vsock_register_mutex locking in
vsock_assign_transport() around the transport->release() call, that can
call vsock_linger(). vsock_assign_transport() can be called with sk_lock
held. vsock_linger() calls sk_wait_event() that temporarily releases and
re-acquires sk_lock. During this window, if another thread hold
vsock_register_mutex while trying to acquire sk_lock, a circular
dependency is created.
Fix this by releasing vsock_register_mutex before calling
transport->release() and vsock_deassign_transport(). This is safe
because we don't need to hold vsock_register_mutex while releasing the
old transport, and we ensure the new transport won't disappear by
obtaining a module reference first via try_module_get().
Reported-by: syzbot+10e35716f8e4929681fa@syzkaller.appspotmail.com
Tested-by: syzbot+10e35716f8e4929681fa@syzkaller.appspotmail.com
Fixes: 687aa0c5581b ("vsock: Fix transport_* TOCTOU")
Cc: mhal@rbox.co
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251021121718.137668-1-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ralf Lici says:
====================
fix poll behaviour for TCP-based tunnel protocols
This patch series introduces a polling function for datagram-style
sockets that operates on custom skb queues, and updates ovpn (the
OpenVPN data-channel offload module) and espintcp (the TCP Encapsulation
of IKE and IPsec Packets implementation) to use it accordingly.
Protocols like the aforementioned one decapsulate packets received over
TCP and deliver userspace-bound data through a separate skb queue, not
the standard sk_receive_queue. Previously, both relied on
datagram_poll(), which would signal readiness based on non-userspace
packets, leading to misleading poll results and unnecessary recv
attempts in userspace.
Patch 1 introduces datagram_poll_queue(), a variant of datagram_poll()
that accepts an explicit receive queue. This builds on the approach
introduced in commit b50b058, which extended other skb-related functions
to support custom queues. Patch 2 and 3 update espintcp_poll() and
ovpn_tcp_poll() respectively to use this helper, ensuring readiness is
only signaled when userspace data is available.
Each patch is self-contained and the ovpn one includes rationale and
lifecycle enforcement where appropriate.
====================
Link: https://patch.msgid.link/20251021100942.195010-1-ralf@mandelbit.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
openvpn TCP encapsulation uses a custom queue to deliver packets to
userspace. Currently it relies on datagram_poll, which checks
sk_receive_queue, leading to false readiness signals when that queue
contains non-userspace packets.
Switch ovpn_tcp_poll to use datagram_poll_queue with the peer's
user_queue, ensuring poll only signals readiness when userspace data is
actually available. Also refactor ovpn_tcp_poll in order to enforce the
assumption we can make on the lifetime of ovpn_sock and peer.
Fixes: 11851cbd60ea ("ovpn: implement TCP transport")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251021100942.195010-4-ralf@mandelbit.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
espintcp uses a custom queue (ike_queue) to deliver packets to
userspace. The polling logic relies on datagram_poll, which checks
sk_receive_queue, which can lead to false readiness signals when that
queue contains non-userspace packets.
Switch espintcp_poll to use datagram_poll_queue with ike_queue, ensuring
poll only signals readiness when userspace data is actually available.
Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251021100942.195010-3-ralf@mandelbit.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some protocols using TCP encapsulation (e.g., espintcp, openvpn) deliver
userspace-bound packets through a custom skb queue rather than the
standard sk_receive_queue.
Introduce datagram_poll_queue that accepts an explicit receive queue,
and convert datagram_poll into a wrapper around datagram_poll_queue.
This allows protocols with custom skb queues to reuse the core polling
logic without relying on sk_receive_queue.
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Antonio Quartulli <antonio@openvpn.net>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20251021100942.195010-2-ralf@mandelbit.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The __must_hold annotation references &req->ctx->uring_lock, but req
is not in scope in io_install_fixed_file. This change updates the
annotation to reference the correct ctx->uring_lock.
improving code clarity.
Fixes: f110ed8498af ("io_uring: split out fixed file installation and removal")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The generic_handle_domain_irq() function resolves the hardware IRQ
internally. The driver performed a duplicative mapping by calling
irq_find_mapping() first, which could lead to an RCU stall.
Delete the redundant irq_find_mapping() call and pass the hardware IRQ
directly to generic_handle_domain_irq().
Fixes: c5a4b6fd31e8 ("gpio: Add support for Intel LJCA USB GPIO driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251023070231.1305-1-vulab@iscas.ac.cn
[Bartosz: remove unused variable]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add support for the Telit Cinterion FN920C04 module when operating in
ECM (Ethernet Control Model) mode. The following USB product IDs are
used by the module when AT#USBCFG is set to 3 or 7.
0x10A3: ECM + tty (NMEA) + tty (DUN) [+ tty (DIAG)]
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a3 Rev= 5.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=76e7cb38
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10A8: ECM + tty (DUN) + tty (AUX) [+ tty (DIAG)]
T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10a8 Rev= 5.15
S: Manufacturer=Telit Cinterion
S: Product=FN920
S: SerialNumber=76e7cb38
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Adding these IDs allows the option driver to automatically create the
corresponding /dev/ttyUSB* ports under ECM mode.
Tested with FN920C04 under ECM configuration (USBCFG=3 and 7).
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Merge an ACPI device properties handling change fixing the order of
__acpi_node_get_property_reference() arguments broken by a recent
update (Sunil V L)
* 'acpi-property':
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
|
|
Merge cpuidle and cpufreq fixes for 6.18-rc3:
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)
* pm-cpuidle:
Revert "cpuidle: menu: Avoid discarding useful information"
* pm-cpufreq:
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate
|
|
If the send_peer_notif counter and the peer event notify are not synchronized.
It may cause problems such as the loss or dup of peer notify event.
Before this patch:
- If should_notify_peers is true and the lock for send_peer_notif-- fails, peer
event may be sent again in next mii_monitor loop, because should_notify_peers
is still true.
- If should_notify_peers is true and the lock for send_peer_notif-- succeeded,
but the lock for peer event fails, the peer event will be lost.
This patch locks the RTNL for send_peer_notif, events, and commit simultaneously.
Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications")
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Vincent Bernat <vincent@bernat.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20251021050933.46412-1-tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current
intel-gpio fixes for v6.18-1
* Make set debounce errors non-fatal in GPIO ACPI case
* Use human readable error when printing a message in GPIO ACPI code
|
|
Make cifs #include cifsglob.h in advance of #including trace.h so that the
structures defined in cifsglob.h can be accessed directly by the cifs
tracepoints rather than the callers having to manually pass in the bits and
pieces.
This should allow the tracepoints to be made more efficient to use as well
as easier to read in the code.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@manguebit.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
As the SMB1 and SMB2/3 calc_signature functions are called from separate
sign and verify paths, just call them directly rather than using a function
pointer. The SMB3 calc_signature then jumps to the SMB2 variant if
necessary.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Enzo Matsumiya <ematsumiya@suse.de>
cc: Paulo Alcantara <pc@manguebit.org>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There is no need to force a lookup by unhashing the moved dentry after
successfully renaming the file on server. The file metadata will be
re-fetched from server, if necessary, in the next call to
->d_revalidate() anyways.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
One of the coccinelle recipe suggests to use %pe when we deal with
an error pointer. Do it so.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202510231350.calxvXIm-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Commit 16c07342b542 ("gpiolib: acpi: Program debounce when finding GPIO")
adds a gpio_set_debounce_timeout() call to acpi_find_gpio() and makes
acpi_find_gpio() fail if this fails.
But gpio_set_debounce_timeout() failing is a somewhat normal occurrence,
since not all debounce values are supported on all GPIO/pinctrl chips.
Making this an error for example break getting the card-detect GPIO for
the micro-sd slot found on many Bay Trail tablets, breaking support for
the micro-sd slot on these tablets.
acpi_request_own_gpiod() already treats gpio_set_debounce_timeout()
failures as non-fatal, just warning about them.
Add a acpi_gpio_set_debounce_timeout() helper which wraps
gpio_set_debounce_timeout() and warns on failures and replace both existing
gpio_set_debounce_timeout() calls with the helper.
Since the helper only warns on failures this fixes the card-detect issue.
Fixes: 16c07342b542 ("gpiolib: acpi: Program debounce when finding GPIO")
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <superm1@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/stable/20250920201200.20611-1-hansg%40kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
HSR/PRP driver does not handle correctly having slaves/interlink devices
in a different net namespace. Currently, it is possible to create a HSR
link in a different net namespace than the slaves/interlink with the
following command:
ip link add hsr0 netns hsr-ns type hsr slave1 eth1 slave2 eth2
As there is no use-case on supporting this scenario, enforce that HSR
device link matches netns defined by IFLA_LINK_NETNSID.
The iproute2 command mentioned above will throw the following error:
Error: hsr: HSR slaves/interlink must be on the same net namespace than HSR link.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20251020135533.9373-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
chunk->skb pointer is dereferenced in the if-block where it's supposed
to be NULL only.
chunk->skb can only be NULL if chunk->head_skb is not. Check for frag_list
instead and do it just before replacing chunk->skb. We're sure that
otherwise chunk->skb is non-NULL because of outer if() condition.
Fixes: 90017accff61 ("sctp: Add GSO support")
Signed-off-by: Alexey Simakov <bigalex934@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://patch.msgid.link/20251021130034.6333-1-bigalex934@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In ptp_ocp_sma_fb_init(), the code mistakenly used bp->sma[1]
instead of bp->sma[i] inside a for-loop, which caused only SMA[1]
to have its DIRECTION_CAN_CHANGE capability cleared. This led to
inconsistent capability flags across SMA pins.
Fixes: 09eeb3aecc6c ("ptp_ocp: implement DPLL ops")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251021182456.9729-1-jiashengjiangcool@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix TCP_Server_Info::credits to be signed, just as echo_credits and
oplock_credits are. This also fixes what ought to get at least a
compilation warning if not an outright error in *get_credits_field() as a
pointer to the unsigned server->credits field is passed back as a pointer
to a signed int.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Acked-by: Pavel Shilovskiy <pshilovskiy@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
'net-ravb-fix-soc-specific-configuration-and-descriptor-handling-issues'
Lad Prabhakar says:
====================
net: ravb: Fix SoC-specific configuration and descriptor handling issues [part]
This series addresses several issues in the Renesas Ethernet AVB (ravb)
driver related descriptor ordering.
A potential ordering hazard in descriptor setup could cause
the DMA engine to start prematurely, leading to TX stalls on some
platforms.
The series includes the following changes:
Enforce descriptor type ordering to prevent early DMA start
Ensure proper write ordering of TX descriptor type fields to prevent the
DMA engine from observing an incomplete descriptor chain. This fixes
observed TX stalls on RZ/G2L platforms running RT kernels.
Tested on R/G1x Gen2, RZ/G2x Gen3 and RZ/G2L family hardware.
====================
Link: https://patch.msgid.link/20251017151830.171062-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a final dma_wmb() barrier before triggering the transmit request
(TCCR_TSRQ) to ensure all descriptor and buffer writes are visible to
the DMA engine.
According to the hardware manual, a read-back operation is required
before writing to the doorbell register to guarantee completion of
previous writes. Instead of performing a dummy read, a dma_wmb() is
used to both enforce the same ordering semantics on the CPU side and
also to ensure completion of writes.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Cc: stable@vger.kernel.org
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251017151830.171062-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure the TX descriptor type fields are published in a safe order so the
DMA engine never begins processing a descriptor chain before all descriptor
fields are fully initialised.
For multi-descriptor transmits the driver writes DT_FEND into the last
descriptor and DT_FSTART into the first. The DMA engine begins processing
when it observes DT_FSTART. Move the dma_wmb() barrier so it executes
immediately after DT_FEND and immediately before writing DT_FSTART
(and before DT_FSINGLE in the single-descriptor case). This guarantees
that all prior CPU writes to the descriptor memory are visible to the
device before DT_FSTART is seen.
This avoids a situation where compiler/CPU reordering could publish
DT_FSTART ahead of DT_FEND or other descriptor fields, allowing the DMA to
start on a partially initialised chain and causing corrupted transmissions
or TX timeouts. Such a failure was observed on RZ/G2L with an RT kernel as
transmit queue timeouts and device resets.
Fixes: 2f45d1902acf ("ravb: minimize TX data copying")
Cc: stable@vger.kernel.org
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251017151830.171062-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This makes the logic to prevent on overflow of
the send submission queue with ib_post_send() easier.
As we first get a local credit and then a remote credit
before we mark us as pending.
For now we'll keep the logic around smbdirect_socket.send_io.pending.*,
but that will likely change or be removed completely.
The server will get a similar logic soon, so
we'll be able to share the send code in future.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This introduces logic to prevent on overflow of
the send submission queue with ib_post_send() easier.
As we first get a local credit and then a remote credit
before we mark us as pending.
From reading the git history of the linux smbdirect
implementations in client and server) it was seen
that a peer granted more credits than we requested.
I guess that only happened because of bugs in our
implementation which was active as client and server.
I guess Windows won't do that.
So the local credits make sure we only use the amount
of credits we asked for.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
smb_direct_flush_send_list/send_done
We have a list handling that is much easier to understand:
1. Before smb_direct_flush_send_list() is called all
struct smbdirect_send_io messages are part of
send_ctx->msg_list
2. Before smb_direct_flush_send_list() calls
smb_direct_post_send() we remove the last
element in send_ctx->msg_list and move all
others into last->sibling_list. As only
last has IB_SEND_SIGNALED and gets a completion
vis send_done().
3. send_done() has an easy way to free all others
in sendmsg->sibling_list (if there are any).
And use list_for_each_entry_safe() instead of
a complex custom logic.
This will help us to share send_done() in common
code soon, as it will work fine for the client too,
where last->sibling_list is currently always an empty list.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
waiters on error
There's no need to care about pending or credit counters when we
already disconnecting.
And all related wait_event conditions already check for broken
connections too.
This will simplify the code and makes the following changes simpler.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This will be used to implement a logic in order to make sure
we don't overflow the send submission queue for ib_post_send().
We will initialize the local credits with the
fixed sp->send_credit_target value, which matches
the reserved slots in the submission queue for ib_post_send().
We will be a local credit first and then wait for a remote credit,
if we managed to get both we are allowed to post an
IB_WR_SEND[_WITH_INV]. The local credit is given back to
the pool when we get the local ib_post_send() completion,
while remote credits are granted by the peer.
From reading the git history of the linux smbdirect
implementations in client and server) it was seen
that a peer granted more credits than we requested.
I guess that only happened because of bugs in our
implementation which was active as client and server.
I guess Windows won't do that.
So the local credits make sure we only use the amount
of credits we asked for.
The client already has some logic for this based on
smbdirect_socket.send_io.pending.count, but that
counts in the order direction and makes it complex it
share common logic for various credits classes.
That logic will be replaced soon.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Make use of rdma_rw_mr_factor() to calculate the number of rw
credits and the number of pages per RDMA RW operation.
We get the same numbers for iWarp connections, tested
with siw.ko and irdma.ko (in iWarp mode).
siw:
CIFS: max_qp_rd_atom=128, max_fast_reg_page_list_len = 256
CIFS: max_sgl_rd=0, max_sge_rd=1
CIFS: responder_resources=32 max_frmr_depth=256 mr_io.type=0
CIFS: max_send_wr 384, device reporting max_cqe 3276800 max_qp_wr 32768
ksmbd: max_fast_reg_page_list_len = 256, max_sgl_rd=0, max_sge_rd=1
ksmbd: device reporting max_cqe 3276800 max_qp_wr 32768
ksmbd: Old sc->rw_io.credits: max = 9, num_pages = 256
ksmbd: New sc->rw_io.credits: max = 9, num_pages = 256, maxpages=2048
ksmbd: Info: rdma_send_wr 27 + max_send_wr 256 = 283
irdma (in iWarp mode):
CIFS: max_qp_rd_atom=127, max_fast_reg_page_list_len = 262144
CIFS: max_sgl_rd=0, max_sge_rd=13
CIFS: responder_resources=32 max_frmr_depth=2048 mr_io.type=0
CIFS: max_send_wr 384, device reporting max_cqe 1048574 max_qp_wr 4063
ksmbd: max_fast_reg_page_list_len = 262144, max_sgl_rd=0, max_sge_rd=13
ksmbd: device reporting max_cqe 1048574 max_qp_wr 4063
ksmbd: Old sc->rw_io.credits: max = 9, num_pages = 256
ksmbd: New sc->rw_io.credits: max = 9, num_pages = 256, maxpages=2048
ksmbd: rdma_send_wr 27 + max_send_wr 256 = 283
This means that we get the different correct numbers for ROCE,
tested with rdma_rxe.ko and irdma.ko (in RoCEv2 mode).
rxe:
CIFS: max_qp_rd_atom=128, max_fast_reg_page_list_len = 512
CIFS: max_sgl_rd=0, max_sge_rd=32
CIFS: responder_resources=32 max_frmr_depth=512 mr_io.type=0
CIFS: max_send_wr 384, device reporting max_cqe 32767 max_qp_wr 1048576
ksmbd: max_fast_reg_page_list_len = 512, max_sgl_rd=0, max_sge_rd=32
ksmbd: device reporting max_cqe 32767 max_qp_wr 1048576
ksmbd: Old sc->rw_io.credits: max = 9, num_pages = 256
ksmbd: New sc->rw_io.credits: max = 65, num_pages = 32, maxpages=2048
ksmbd: rdma_send_wr 65 + max_send_wr 256 = 321
irdma (in RoCEv2 mode):
CIFS: max_qp_rd_atom=127, max_fast_reg_page_list_len = 262144,
CIFS: max_sgl_rd=0, max_sge_rd=13
CIFS: responder_resources=32 max_frmr_depth=2048 mr_io.type=0
CIFS: max_send_wr 384, device reporting max_cqe 1048574 max_qp_wr 4063
ksmbd: max_fast_reg_page_list_len = 262144, max_sgl_rd=0, max_sge_rd=13
ksmbd: device reporting max_cqe 1048574 max_qp_wr 4063
ksmbd: Old sc->rw_io.credits: max = 9, num_pages = 256,
ksmbd: New sc->rw_io.credits: max = 159, num_pages = 13, maxpages=2048
ksmbd: rdma_send_wr 159 + max_send_wr 256 = 415
And rely on rdma_rw_init_qp() to setup ib_mr_pool_init() for
RW MRs. ib_mr_pool_destroy() will be called by rdma_rw_cleanup_mrs().
It seems the code was implemented before the rdma_rw_* layer
was fully established in the kernel.
While there also add additional space for ib_drain_qp().
This should make sure ib_post_send() will never fail
because the submission queue is full.
Fixes: ddbdc861e37c ("ksmbd: smbd: introduce read/write credits for RDMA read/write")
Fixes: 4c564f03e23b ("smb: server: make use of common smbdirect_socket")
Fixes: 177368b99243 ("smb: server: make use of common smbdirect_socket_parameters")
Fixes: 95475d8886bd ("smb: server: make use smbdirect_socket.rw_io.credits")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All driver fixes. The big change is the storvsc one to rejig the
hyper-v channel handling to be more efficient for SMP virtual
machines"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Kaanapali
scsi: ufs: qcom: dt-bindings: Document the Kaanapali UFS controller
scsi: libfc: Prevent integer overflow in fc_fcp_recv_data()
scsi: qla4xxx: Fix typos in comments
scsi: storvsc: Prefer returning channel with the same CPU as on the I/O issuing CPU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"17 hotfixes. 12 are cc:stable and 14 are for MM.
There's a two-patch DAMON series from SeongJae Park which addresses a
missed check and possible memory leak. Apart from that it's all
singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-10-22-12-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
csky: abiv2: adapt to new folio flags field
mm/damon/core: use damos_commit_quota_goal() for new goal commit
mm/damon/core: fix potential memory leak by cleaning ops_filter in damon_destroy_scheme
hugetlbfs: move lock assertions after early returns in huge_pmd_unshare()
vmw_balloon: indicate success when effectively deflating during migration
mm/damon/core: fix list_add_tail() call on damon_call()
mm/mremap: correctly account old mapping after MREMAP_DONTUNMAP remap
mm: prevent poison consumption when splitting THP
ocfs2: clear extent cache after moving/defragmenting extents
mm: don't spin in add_stack_record when gfp flags don't allow
dma-debug: don't report false positives with DMA_BOUNCE_UNALIGNED_KMALLOC
mm/damon/sysfs: dealloc commit test ctx always
mm/damon/sysfs: catch commit test ctx alloc failure
hung_task: fix warnings caused by unaligned lock pointers
|
|
Restore the dependency of the architecture-optimized Poly1305 code on
!KMSAN. It was dropped by commit b646b782e522 ("lib/crypto: poly1305:
Consolidate into single module").
Unlike the other hash algorithms in lib/crypto/ (e.g., SHA-512), the way
the architecture-optimized Poly1305 code is integrated results in
assembly code initializing memory, for several different architectures.
Thus, it generates false positive KMSAN warnings. These could be
suppressed with kmsan_unpoison_memory(), but it would be needed in quite
a few places. For now let's just restore the dependency on !KMSAN.
Note: this should have been caught by running poly1305_kunit with
CONFIG_KMSAN=y, which I did. However, due to an unrelated KMSAN bug
(https://lore.kernel.org/r/20251022030213.GA35717@sol/), KMSAN currently
isn't working reliably. Thus, the warning wasn't noticed until later.
Fixes: b646b782e522 ("lib/crypto: poly1305: Consolidate into single module")
Reported-by: syzbot+01fcd39a0d90cdb0e3df@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/68f6a48f.050a0220.91a22.0452.GAE@google.com/
Reported-by: Pei Xiao <xiaopei01@kylinos.cn>
Closes: https://lore.kernel.org/r/751b3d80293a6f599bb07770afcef24f623c7da0.1761026343.git.xiaopei01@kylinos.cn/
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251022033405.64761-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Same as [1] but also with netdev@ as an additional mailing list.
io_uring zero copy receive is of particular interest to netdev
participants too, given its tight integration to netdev core.
With this updated entry, folks running get_maintainer.pl on patches that
touch io_uring/zcrx.* will know to send it to netdev@ as well.
Note that this doesn't mean all changes require explicit acks from
netdev; this is purely for wider visibility and for other contributors
to know where to send patches.
[1]: https://lore.kernel.org/io-uring/989528e611b51d71fb712691ebfb76d2059ba561.1755461246.git.asml.silence@gmail.com/
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
[axboe: use correct io_uring tree URL]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix the indentation to ensure consistent code style and improve
readability and to fix the errors:
ERROR: code indent should use tabs where possible
+ return io_net_import_vec(req, kmsg, sr->buf, sr->len, ITER_SOURCE);$
ERROR: code indent should use tabs where possible
+^I^I^I struct io_big_cqe *big_cqe)$
Tested by running the /scripts/checkpatch.pl
Signed-off-by: Ranganath V N <vnranganath.20@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The current approach is a bit naive, and hence calls the time querying
way too often. Only start the "doing work" timer when there's actual
work to do, and then use that information to terminate (and account) the
work time once done. This greatly reduces the frequency of these calls,
when they cannot have changed anyway.
Running a basic random reader that is setup to use SQPOLL, a profile
before this change shows these as the top cycle consumers:
+ 32.60% iou-sqp-1074 [kernel.kallsyms] [k] thread_group_cputime_adjusted
+ 19.97% iou-sqp-1074 [kernel.kallsyms] [k] thread_group_cputime
+ 12.20% io_uring io_uring [.] submitter_uring_fn
+ 4.13% iou-sqp-1074 [kernel.kallsyms] [k] getrusage
+ 2.45% iou-sqp-1074 [kernel.kallsyms] [k] io_submit_sqes
+ 2.18% iou-sqp-1074 [kernel.kallsyms] [k] __pi_memset_generic
+ 2.09% iou-sqp-1074 [kernel.kallsyms] [k] cputime_adjust
and after this change, top of profile looks as follows:
+ 36.23% io_uring io_uring [.] submitter_uring_fn
+ 23.26% iou-sqp-819 [kernel.kallsyms] [k] io_sq_thread
+ 10.14% iou-sqp-819 [kernel.kallsyms] [k] io_sq_tw
+ 6.52% iou-sqp-819 [kernel.kallsyms] [k] tctx_task_work_run
+ 4.82% iou-sqp-819 [kernel.kallsyms] [k] nvme_submit_cmds.part.0
+ 2.91% iou-sqp-819 [kernel.kallsyms] [k] io_submit_sqes
[...]
0.02% iou-sqp-819 [kernel.kallsyms] [k] cputime_adjust
where it's spending the cycles on things that actually matter.
Reported-by: Fengnan Chang <changfengnan@bytedance.com>
Cc: stable@vger.kernel.org
Fixes: 3fcb9d17206e ("io_uring/sqpoll: statistics of the true utilization of sq threads")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
getrusage() does a lot more than what the SQPOLL accounting needs, the
latter only cares about (and uses) the stime. Rather than do a full
RUSAGE_SELF summation, just query the used stime instead.
Cc: stable@vger.kernel.org
Fixes: 3fcb9d17206e ("io_uring/sqpoll: statistics of the true utilization of sq threads")
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
According to Maciej W. Rozycki <macro@orcam.me.uk>, the
mips_pcibios_init() for malta adjusts root bus IO resource start
address to prevent interfering with PIIX4 I/O cycle decoding. Adjusting
lower bound leaves PIIX4 IO resources outside of the root bus resource
and assign_fixed_resource_on_bus() does not link the resources into the
resource tree.
Prior to commit ae81aad5c2e1 ("MIPS: PCI: Use pci_enable_resources()") the
arch specific pcibios_enable_resources() did not check if the resources
were assigned which diverges from what PCI core checks, effectively hiding
the PIIX4 IO resources were not properly within the resource tree. After
starting to use pcibios_enable_resources() from PCI core, enabling PIIX4
fails:
ata_piix 0000:00:0a.1: BAR 0 [io 0x01f0-0x01f7]: not claimed; can't enable device
ata_piix 0000:00:0a.1: probe with driver ata_piix failed with error -22
MIPS PCI code already has support for enforcing lower bounds using
PCIBIOS_MIN_IO in pcibios_align_resource() without altering the IO window
start address itself. Make malta PCI code too to use PCIBIOS_MIN_IO.
Fixes: ae81aad5c2e1 ("MIPS: PCI: Use pci_enable_resources()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/linux-pci/9085ab12-1559-4462-9b18-f03dcb9a4088@roeck-us.net/
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/linux-pci/alpine.DEB.2.21.2510132229120.39634@angie.orcam.me.uk/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://patch.msgid.link/20251017110903.1973-1-ilpo.jarvinen@linux.intel.com
|
|
Covering the PCI southbridge legacy port I/O range with a northbridge
resource reservation prevents MIPS Malta platform code from claiming its
standard legacy resources. This is because request_resource() calls
cause a clash with the previous reservation and consequently fail.
Change to using insert_resource() so as to prevent the clash, switching
the legacy reservations from:
00000000-00ffffff : MSC PCI I/O
00000020-00000021 : pic1
00000070-00000077 : rtc0
000000a0-000000a1 : pic2
[...]
to:
00000000-00ffffff : MSC PCI I/O
00000000-0000001f : dma1
00000020-00000021 : pic1
00000040-0000005f : timer
00000060-0000006f : keyboard
00000070-00000077 : rtc0
00000080-0000008f : dma page reg
000000a0-000000a1 : pic2
000000c0-000000df : dma2
[...]
Fixes: ae81aad5c2e1 ("MIPS: PCI: Use pci_enable_resources()")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: stable@vger.kernel.org # v6.18+
Link: https://patch.msgid.link/alpine.DEB.2.21.2510212001250.8377@angie.orcam.me.uk
|
|
MIPS Malta platform code registers the PCI southbridge legacy port I/O
PS/2 keyboard range as a standard resource marked as busy. It prevents
the i8042 driver from registering as it fails to claim the resource in
a call to i8042_platform_init(). Consequently PS/2 keyboard and mouse
devices cannot be used with this platform.
Fix the issue by removing the busy marker from the standard reservation,
making the driver register successfully:
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
and the resource show up as expected among the legacy devices:
00000000-00ffffff : MSC PCI I/O
00000000-0000001f : dma1
00000020-00000021 : pic1
00000040-0000005f : timer
00000060-0000006f : keyboard
00000060-0000006f : i8042
00000070-00000077 : rtc0
00000080-0000008f : dma page reg
000000a0-000000a1 : pic2
000000c0-000000df : dma2
[...]
If the i8042 driver has not been configured, then the standard resource
will remain there preventing any conflicting dynamic assignment of this
PCI port I/O address range.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/alpine.DEB.2.21.2510211919240.8377@angie.orcam.me.uk
|
|
The block layer PI generation / verification code expects the bio_vecs
to have at least LBA size (or more correctly integrity internal)
granularity. With the direct I/O alignment relaxation in 2022, user
space can now feed bios with less alignment than that, leading to
scribbling outside the PI buffers. Apparently this wasn't noticed so far
because none of the tests generate such buffers, but since 851c4c96db00
("xfs: implement XFS_IOC_DIOINFO in terms of vfs_getattr"), xfstests
generic/013 by default generates such I/O now that the relaxed alignment
is advertised by the XFS_IOC_DIOINFO ioctl.
Fix this by increasing the required alignment when using PI, although
handling arbitrary alignment in the long run would be even nicer.
Fixes: bf8d08532bc1 ("iomap: add support for dma aligned direct-io")
Fixes: b1a000d3b8ec ("block: relax direct io memory alignment")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for Quectel RG255C devices to complement commit 5c964c8a97c1
("net: usb: qmi_wwan: add Quectel RG255C").
The composition is DM / NMEA / AT / QMI.
T: Bus=01 Lev=02 Prnt=99 Port=01 Cnt=02 Dev#=110 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0316 Rev= 5.15
S: Manufacturer=Quectel
S: Product=RG255C-GL
S: SerialNumber=xxxxxxxx
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi-wmax:
- Fix NULL pointer dereference in sleep handlers
- Add AWCC support to Dell G15 5530
- mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init
* tag 'platform-drivers-x86-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: alienware-wmi-wmax: Add AWCC support to Dell G15 5530
MAINTAINERS: add Denis Benato as maintainer for asus notebooks
platform/mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init
platform/x86: alienware-wmi-wmax: Fix NULL pointer dereference in sleep handlers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Just three small fixes to address fuzzed images in relatively new
features, as reported by Robert.
- Hardening against fuzzed encoded extents
- Fix infinite loops due to crafted subpage compact indexes
- Improve z_erofs_extent_lookback()"
* tag 'erofs-for-6.18-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: consolidate z_erofs_extent_lookback()
erofs: avoid infinite loops due to corrupted subpage compact indexes
erofs: fix crafted invalid cases for encoded extents
|
|
Pull 9pfs fix from Dominique Martinet:
"Fix 9p cache=mmap regression by revert
This reverts the problematic commit instead of trying to fix it in a
rush"
* tag '9p-for-6.18-rc3-v2' of https://github.com/martinetd/linux:
Revert "fs/9p: Refresh metadata in d_revalidate for uncached mode too"
|
|
In of_msi_get_domain() if the iterator loop stops early because an
irq_domain match is detected, an of_node_put() on the iterator node is
needed to keep the OF node refcount in sync.
Add it.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://patch.msgid.link/20251021124103.198419-3-lpieralisi@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
In some legacy platforms the MSI controller for a PCI host bridge is
identified by an msi-parent property whose phandle points at an MSI
controller node with no #msi-cells property, that implicitly
means #msi-cells == 0.
For such platforms, mapping a device ID and retrieving the MSI controller
node becomes simply a matter of checking whether in the device hierarchy
there is an msi-parent property pointing at an MSI controller node with
such characteristics.
Add a helper function to of_msi_xlate() to check the msi-parent property in
addition to msi-map and retrieve the MSI controller node (with a 1:1 ID
deviceID-IN<->deviceID-OUT mapping) to provide support for deviceID
mapping and MSI controller node retrieval for such platforms.
Fixes: 57d72196dfc8 ("irqchip/gic-v5: Add GICv5 ITS support")
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: Sascha Bischoff <sascha.bischoff@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20251021124103.198419-2-lpieralisi@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The SPI controller found in the RK3506 SoC is still compatible to the
original one introduced with the RK3066, so add the RK3506 compatible
to the list of its variants.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251022004200.204276-1-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix compilation failure when compiling the kernel with the x32 toolchain.
In file included from check.c:16:
check.c: In function ¡check_abs_references¢:
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:47:17: error: format ¡%lx¢ expects argument of type ¡long unsigned int¢, but argument 7 has type ¡u64¢ {aka ¡long
long unsigned int¢} [-Werror=format=]
47 | "%s%s%s: objtool" extra ": " format "\n", \
| ^~~~~~~~~~~~~~~~~
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:54:9: note: in expansion of macro ¡___WARN¢
54 | ___WARN(severity, "", format, ##__VA_ARGS__)
| ^~~~~~~
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:74:27: note: in expansion of macro ¡__WARN¢
74 | #define WARN(format, ...) __WARN(WARN_STR, format, ##__VA_ARGS__)
| ^~~~~~
check.c:4713:33: note: in expansion of macro ¡WARN¢
4713 | WARN("section %s has absolute relocation at offset 0x%lx",
| ^~~~
Fixes: 0d6e4563fc03 ("objtool: Add action to check for absence of absolute relocations")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/1ac32fff-2e67-5155-f570-69aad5bf5412@redhat.com
|
|
Between Rust 1.79 and 1.86, under `CONFIG_RUST_KERNEL_DOCTESTS=y`,
`objtool` may report:
rust/doctests_kernel_generated.o: warning: objtool:
rust_doctest_kernel_alloc_kbox_rs_13() falls through to next
function rust_doctest_kernel_alloc_kvec_rs_0()
(as well as in rust_doctest_kernel_alloc_kvec_rs_0) due to calls to the
`noreturn` symbol:
core::option::expect_failed
from code added in commits 779db37373a3 ("rust: alloc: kvec: implement
AsPageIter for VVec") and 671618432f46 ("rust: alloc: kbox: implement
AsPageIter for VBox").
Thus add the mangled one to the list so that `objtool` knows it is
actually `noreturn`.
This can be reproduced as well in other versions by tweaking the code,
such as the latest stable Rust (1.90.0).
Stable does not have code that triggers this, but it could have it in
the future. Downstream forks could too. Thus tag it for backport.
See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later.
Link: https://patch.msgid.link/20251020020714.2511718-1-ojeda@kernel.org
|
|
Matteo reported hitting the assert_list_leaf_cfs_rq() warning from
enqueue_task_fair() post commit fe8d238e646e ("sched/fair: Propagate
load for throttled cfs_rq") which transitioned to using
cfs_rq_pelt_clock_throttled() check for leaf cfs_rq insertions in
propagate_entity_cfs_rq().
The "cfs_rq->pelt_clock_throttled" flag is used to indicate if the
hierarchy has its PELT frozen. If a cfs_rq's PELT is marked frozen, all
its descendants should have their PELT frozen too or weird things can
happen as a result of children accumulating PELT signals when the
parents have their PELT clock stopped.
Another side effect of this is the loss of integrity of the leaf cfs_rq
list. As debugged by Aaron, consider the following hierarchy:
root(#)
/ \
A(#) B(*)
|
C <--- new cgroup
|
D <--- new cgroup
# - Already on leaf cfs_rq list
* - Throttled with PELT frozen
The newly created cgroups don't have their "pelt_clock_throttled" signal
synced with cgroup B. Next, the following series of events occur:
1. online_fair_sched_group() for cgroup D will call
propagate_entity_cfs_rq(). (Same can happen if a throttled task is
moved to cgroup C and enqueue_task_fair() returns early.)
propagate_entity_cfs_rq() adds the cfs_rq of cgroup C to
"rq->tmp_alone_branch" since its PELT clock is not marked throttled
and cfs_rq of cgroup B is not on the list.
cfs_rq of cgroup B is skipped since its PELT is throttled.
root cfs_rq already exists on cfs_rq leading to
list_add_leaf_cfs_rq() returning early.
The cfs_rq of cgroup C is left dangling on the
"rq->tmp_alone_branch".
2. A new task wakes up on cgroup A. Since the whole hierarchy is already
on the leaf cfs_rq list, list_add_leaf_cfs_rq() keeps returning early
without any modifications to "rq->tmp_alone_branch".
The final assert_list_leaf_cfs_rq() in enqueue_task_fair() sees the
dangling reference to cgroup C's cfs_rq in "rq->tmp_alone_branch".
!!! Splat !!!
Syncing the "pelt_clock_throttled" indicator with parent cfs_rq is not
enough since the new cfs_rq is not yet enqueued on the hierarchy. A
dequeue on other subtree on the throttled hierarchy can freeze the PELT
clock for the parent hierarchy without setting the indicators for this
newly added cfs_rq which was never enqueued.
Since there are no tasks on the new hierarchy, start a cfs_rq on a
throttled hierarchy with its PELT clock throttled. The first enqueue, or
the distribution (whichever happens first) will unfreeze the PELT clock
and queue the cfs_rq on the leaf cfs_rq list.
While at it, add an assert_list_leaf_cfs_rq() in
propagate_entity_cfs_rq() to catch such cases in the future.
Closes: https://lore.kernel.org/lkml/58a587d694f33c2ea487c700b0d046fa@codethink.co.uk/
Fixes: e1fad12dcb66 ("sched/fair: Switch to task based throttle model")
Reported-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Suggested-by: Aaron Lu <ziqianlu@bytedance.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Aaron Lu <ziqianlu@bytedance.com>
Tested-by: Aaron Lu <ziqianlu@bytedance.com>
Tested-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Link: https://patch.msgid.link/20251021053522.37583-1-kprateek.nayak@amd.com
|
|
Some MediaTek SoCs got a gated UART baud clock, which currently gets
disabled as the clk subsystem believes it would be unused. This results in
the uart freezing right after "clk: Disabling unused clocks" on those
platforms.
Request the baud clock to be prepared and enabled during probe, and to
restore run-time power management capabilities to what it was before commit
e32a83c70cf9 ("serial: 8250-mtk: modify mtk uart power and clock
management") disable and unprepare the baud clock when suspending the UART,
prepare and enable it again when resuming it.
Fixes: e32a83c70cf9 ("serial: 8250-mtk: modify mtk uart power and clock management")
Fixes: b6c7ff2693ddc ("serial: 8250_mtk: Simplify clock sequencing and runtime PM")
Cc: stable <stable@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/de5197ccc31e1dab0965cabcc11ca92e67246cf6.1758058441.git.daniel@makrotopia.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check the return value of reset_control_deassert() in the probe
function to prevent continuing probe when reset deassertion fails.
Previously, reset_control_deassert() was called without checking its
return value, which could lead to probe continuing even when the
device reset wasn't properly deasserted.
The fix checks the return value and returns an error with dev_err_probe()
if reset deassertion fails, providing better error handling and
diagnostics.
Fixes: acbdad8dd1ab ("serial: 8250_dw: simplify optional reset handling")
Cc: stable <stable@kernel.org>
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Link: https://patch.msgid.link/20251019095131.252848-1-a.shimko.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SCIF instances on R-Car Gen5 have a single interrupt, just like on
other R-Car SoCs.
Fixes: 6ac1d60473727931 ("dt-bindings: serial: sh-sci: Document r8a78000 bindings")
Cc: stable <stable@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/09bc9881b31bdb948ce8b69a2b5acf633f5505a4.1759920441.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 43c51bb573aa ("sc16is7xx: make sure device is in suspend once
probed") permanently enabled access to the enhanced features in
sc16is7xx_probe(), and it is never disabled after that.
Therefore, remove re-enable of enhanced features in
sc16is7xx_set_baud(). This eliminates a potential useless read + write
cycle each time the baud rate is reconfigured.
Fixes: 43c51bb573aa ("sc16is7xx: make sure device is in suspend once probed")
Cc: stable <stable@kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20251006142002.177475-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Advantech 2-port serial card with PCI vendor=0x13fe and device=0x0018
has a 'XR17V35X' chip installed on the circuit board. Therefore, this
driver can be used instead of theu outdated out-of-tree driver from the
manufacturer.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20250924134115.2667650-1-fe@dev.tdt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The receive error handling code is shared between RSCI and all other
SCIF port types, but the RSCI overrun_reg is specified as a memory
offset, while for other SCIF types it is an enum value used to index
into the sci_port_params->regs array, as mentioned above the
sci_serial_in() function.
For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call
inside the sci_handle_fifo_overrun() function to index outside the
bounds of the regs array, which currently has a size of 20, as specified
by SCI_NR_REGS.
Because of this, we end up accessing memory outside of RSCI's
rsci_port_params structure, which, when interpreted as a plat_sci_reg,
happens to have a non-zero size, causing the following WARN when
sci_serial_in() is called, as the accidental size does not match the
supported register sizes.
The existence of the overrun_reg needs to be checked because
SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not
present in the regs array.
Avoid calling sci_getreg() for port types which don't use standard
register handling.
Use the ops->read_reg() and ops->write_reg() functions to properly read
and write registers for RSCI, and change the type of the status variable
to accommodate the 32-bit CSR register.
sci_getreg() and sci_serial_in() are also called with overrun_reg in the
sci_mpxed_interrupt() interrupt handler, but that code path is not used
for RSCI, as it does not have a muxed interrupt.
------------[ cut here ]------------
Invalid register access
WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac
Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT
Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT)
pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : sci_serial_in+0x38/0xac
lr : sci_serial_in+0x38/0xac
sp : ffff800080003e80
x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d
x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80
x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000
x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a
x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720
x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720
x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48
x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48
x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80
Call trace:
sci_serial_in+0x38/0xac (P)
sci_handle_fifo_overrun.isra.0+0x70/0x134
sci_er_interrupt+0x50/0x39c
__handle_irq_event_percpu+0x48/0x140
handle_irq_event+0x44/0xb0
handle_fasteoi_irq+0xf4/0x1a0
handle_irq_desc+0x34/0x58
generic_handle_domain_irq+0x1c/0x28
gic_handle_irq+0x4c/0x140
call_on_irq_stack+0x30/0x48
do_interrupt_handler+0x80/0x84
el1_interrupt+0x34/0x68
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
default_idle_call+0x28/0x58 (P)
do_idle+0x1f8/0x250
cpu_startup_entry+0x34/0x3c
rest_init+0xd8/0xe0
console_on_rootfs+0x0/0x6c
__primary_switched+0x88/0x90
---[ end trace 0000000000000000 ]---
Cc: stable <stable@kernel.org>
Fixes: 0666e3fe95ab ("serial: sh-sci: Add support for RZ/T2H SCI")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Link: https://patch.msgid.link/20250923154707.1089900-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since pm_runtime_get_active() returns 0 on success, all of the
DEFINE_GUARD_COND() macros in pm_runtime.h need the "_RET == 0"
condition at the end of the argument list or they would not work
correctly.
Fixes: 9a0abc39450a ("PM: runtime: Add auto-cleanup macros for "resume and get" operations")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-pm/202510191529.BCyjKlLQ-lkp@intel.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Link: https://patch.msgid.link/5943878.DvuYhMxLoT@rafael.j.wysocki
|
|
On a filesystem with parent pointers, xchk_nlinks_collect_dir walks both
the directory entries (data fork) and the parent pointers (attr fork) to
determine the correct link count. Unfortunately I forgot to update the
lock mode logic to handle the case of a directory whose attr fork is in
btree format and has not yet been loaded *and* whose data fork doesn't
need loading.
This leads to a bunch of assertions from xfs/286 in xfs_iread_extents
because we only took ILOCK_SHARED, not ILOCK_EXCL. You'd need the rare
happenstance of a directory with a large number of non-pptr extended
attributes set and enough memory pressure to cause the directory to be
evicted and partially reloaded from disk.
I /think/ this only started in 6.18-rc1 because I've started seeing OOM
errors with the maple tree slab using 70% of memory, and this didn't
happen in 6.17. Yay dynamic systems!
Cc: stable@vger.kernel.org # v6.10
Fixes: 77ede5f44b0d86 ("xfs: walk directory parent pointers to determine backref count")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Apparently we can never deprecate mount options in this project, because
it will invariably turn out that some foolish userspace depends on some
behavior and break. From Oleksandr Natalenko:
In v6.18, the attr2 XFS mount option is removed. This may silently
break system boot if the attr2 option is still present in /etc/fstab
for rootfs.
Consider Arch Linux that is being set up from scratch with / being
formatted as XFS. The genfstab command that is used to generate
/etc/fstab produces something like this by default:
/dev/sda2 on / type xfs (rw,relatime,attr2,discard,inode64,logbufs=8,logbsize=32k,noquota)
Once the system is set up and rebooted, there's no deprecation warning
seen in the kernel log:
# cat /proc/cmdline
root=UUID=77b42de2-397e-47ee-a1ef-4dfd430e47e9 rootflags=discard rd.luks.options=discard quiet
# dmesg | grep -i xfs
[ 2.409818] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[ 2.415341] XFS (sda2): Mounting V5 Filesystem 77b42de2-397e-47ee-a1ef-4dfd430e47e9
[ 2.442546] XFS (sda2): Ending clean mount
Although as per the deprecation intention, it should be there.
Vlastimil (in Cc) suggests this is because xfs_fs_warn_deprecated()
doesn't produce any warning by design if the XFS FS is set to be
rootfs and gets remounted read-write during boot. This imposes two
problems:
1) a user doesn't see the deprecation warning; and
2) with v6.18 kernel, the read-write remount fails because of unknown
attr2 option rendering system unusable:
systemd[1]: Switching root.
systemd-remount-fs[225]: /usr/bin/mount for / exited with exit status 32.
# mount -o rw /
mount: /: fsconfig() failed: xfs: Unknown parameter 'attr2'.
Thorsten (in Cc) suggested reporting this as a user-visible regression.
From my PoV, although the deprecation is in place for 5 years already,
it may not be visible enough as the warning is not emitted for rootfs.
Considering the amount of systems set up with XFS on /, this may
impose a mass problem for users.
Vlastimil suggested making attr2 option a complete noop instead of
removing it.
IOWs, the initrd mounts the root fs with (I assume) no mount options,
and mount -a remounts with whatever options are in fstab. However,
XFS doesn't complain about deprecated mount options during a remount, so
technically speaking we were not warning all users in all combinations
that they were heading for a cliff.
Gotcha!!
Now, how did 'attr2' get slurped up on so many systems? The old code
would put that in /proc/mounts if the filesystem happened to be in attr2
mode, even if user hadn't mounted with any such option. IOWs, this is
because someone thought it would be a good idea to advertise system
state via /proc/mounts.
The easy way to fix this is to reintroduce the four mount options but
map them to a no-op option that ignores them, and hope that nobody's
depending on attr2 to appear in /proc/mounts. (Hint: use the fsgeometry
ioctl). But we've learned our lesson, so complain as LOUDLY as possible
about the deprecation.
Lessons learned:
1. Don't expose system state via /proc/mounts; the only strings that
ought to be there are options *explicitly* provided by the user.
2. Never tidy, it's not worth the stress and irritation.
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: stable@vger.kernel.org # v6.18-rc1
Fixes: b9a176e54162f8 ("xfs: remove deprecated mount options")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The deprecation of the 'attr2' mount option in 6.18 wasn't entirely
successful because nobody noticed that the kernel never printed a
warning about attr2 being set in fstab if the only xfs filesystem is the
root fs; the initramfs mounts the root fs with no mount options; and the
init scripts only conveyed the fstab options by remounting the root fs.
Fix this by making it complain all the time.
Cc: stable@vger.kernel.org # v5.13
Fixes: 92cf7d36384b99 ("xfs: Skip repetitive warnings about mount options")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_daddr_t is a signed type, which means that xfs_buf_map_verify is
using a signed comparison. This causes problems if bt_nr_sectors is
never overridden (e.g. in the case of an xfbtree for rmap btree repairs)
because even daddr 0 can't pass the verifier test in that case.
Define an explicit max constant and set the initial bt_nr_sectors to a
positive value.
Found by xfs/422.
Cc: stable@vger.kernel.org # v6.18-rc1
Fixes: 42852fe57c6d2a ("xfs: track the number of blocks in each buftarg")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
When there is no port entry in the tcpci entry itself, the driver will
trigger an error message "OF: graph: no port node found in /...../typec" .
It is documented that the dts node should contain an connector entry
with ports and several port pointing to devices with usb-role-switch
property set. Only when those connector entry is missing, it should
check for port entries in the main node.
We switch the search order for looking after ports, which will avoid the
failure message while there are explicit connector entries.
Fixes: d56de8c9a17d ("usb: typec: tcpm: try to get role switch from tcpc fwnode")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20251013-b4-ml-topic-tcpm-v2-1-63c9b2ab8a0b@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The list of Huawei LTE modules needing the quirk fixing spurious wakeups
was missing the IDs of the Huawei ME906S module, therefore suspend did not
work.
Cc: stable <stable@kernel.org>
Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20251020134304.35079-1-wse@tuxedocomputers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the check on the maximum transfer length in Raw Gadget for both
control and non-control transfers.
Limiting the transfer length causes a problem with emulating USB devices
whose full configuration descriptor exceeds PAGE_SIZE in length.
Overall, there does not appear to be any reason to enforce any kind of
transfer length limit on the Raw Gadget side for either control or
non-control transfers, so let's just drop the related check.
Cc: stable <stable@kernel.org>
Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://patch.msgid.link/a6024e8eab679043e9b8a5defdb41c4bda62f02b.1761085528.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
btrfs_extent_root()/btrfs_global_root() does not return error pointers,
it returns NULL on error.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/all/aNJfvxj0anEnk9Dm@stanley.mountain/
Fixes : ed4e6b5d644c ("btrfs: ref-verify: handle damaged extent root tree")
CC: stable@vger.kernel.org # 6.17+
Signed-off-by: Amit Dhingra <mechanicalamit@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Move the print before releasing the delayed node.
In my initial testing there was a bug that was causing delayed_nodes
to not get freed which is why I put the print after the release. This
obviously neglects the case where the delayed node is properly freed.
Add condition to make sure we only print if we have more than one
reference to the delayed_node to prevent printing when we only have
the reference taken in btrfs_kill_all_delayed_nodes().
Fixes: b767a28d6154 ("btrfs: print leaked references in kill_all_delayed_nodes()")
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The direction of the IDIO-16 GPIO lines is fixed with the first 16 lines
as output and the remaining 16 lines as input. Set the gpio_config
fixed_direction_output member to represent the fixed direction of the
GPIO lines.
Fixes: db02247827ef ("gpio: idio-16: Migrate to the regmap API")
Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com
Suggested-by: Michael Walle <mwalle@kernel.org>
Cc: stable@vger.kernel.org # ae495810cffe: gpio: regmap: add the .fixed_direction_output configuration parameter
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-3-ebeb50e93c33@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There are GPIO controllers such as the one present in the LX2160ARDB
QIXIS FPGA which have fixed-direction input and output GPIO lines mixed
together in a single register. This cannot be modeled using the
gpio-regmap as-is since there is no way to present the true direction of
a GPIO line.
In order to make this use case possible, add a new configuration
parameter - fixed_direction_output - into the gpio_regmap_config
structure. This will enable user drivers to provide a bitmap that
represents the fixed direction of the GPIO lines.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()
which causes the code to proceed with NULL clock pointers. The current
logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both
valid pointers and NULL, leading to potential NULL pointer dereference
in clk_get_rate().
Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:
"The error code within @ptr if it is an error pointer; 0 otherwise."
This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL
pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)
when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be
called when of_clk_get() returns NULL.
Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid
pointers, preventing potential NULL pointer dereference in clk_get_rate().
Cc: stable <stable@kernel.org>
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: b8fe128dad8f ("arch_topology: Adjust initial CPU capacities with current freq")
Link: https://patch.msgid.link/20250923174308.1771906-1-kaushlendra.kumar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The early error path in hdm_probe() can jump to err_free_mdev before
&mdev->dev has been initialized with device_initialize(). Calling
put_device(&mdev->dev) there triggers a device core WARN and ends up
invoking kref_put(&kobj->kref, kobject_release) on an uninitialized
kobject.
In this path the private struct was only kmalloc'ed and the intended
release is effectively kfree(mdev) anyway, so free it directly instead
of calling put_device() on an uninitialized device.
This removes the WARNING and fixes the pre-initialization error path.
Fixes: 97a6f772f36b ("drivers: most: add USB adapter driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Victoria Votokina <Victoria.Votokina@kaspersky.com>
Link: https://patch.msgid.link/20251010105241.4087114-3-Victoria.Votokina@kaspersky.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
hdm_disconnect() calls most_deregister_interface(), which eventually
unregisters the MOST interface device with device_unregister(iface->dev).
If that drops the last reference, the device core may call release_mdev()
immediately while hdm_disconnect() is still executing.
The old code also freed several mdev-owned allocations in
hdm_disconnect() and then performed additional put_device() calls.
Depending on refcount order, this could lead to use-after-free or
double-free when release_mdev() ran (or when unregister paths also
performed puts).
Fix by moving the frees of mdev-owned allocations into release_mdev(),
so they happen exactly once when the device is truly released, and by
dropping the extra put_device() calls in hdm_disconnect() that are
redundant after device_unregister() and most_deregister_interface().
This addresses the KASAN slab-use-after-free reported by syzbot in
hdm_disconnect(). See report and stack traces in the bug link below.
Reported-by: syzbot+916742d5d24f6c254761@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Closes: https://syzkaller.appspot.com/bug?extid=916742d5d24f6c254761
Fixes: 97a6f772f36b ("drivers: most: add USB adapter driver")
Signed-off-by: Victoria Votokina <Victoria.Votokina@kaspersky.com>
Link: https://patch.msgid.link/20251010105241.4087114-2-Victoria.Votokina@kaspersky.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are no scenarios where a weak increment is invalid on binder_node.
The only possible case where it could be invalid is if the kernel
delivers BR_DECREFS to the process that owns the node, and then
increments the weak refcount again, effectively "reviving" a dead node.
However, that is not possible: when the BR_DECREFS command is delivered,
the kernel removes and frees the binder_node. The fact that you were
able to call binder_inc_node_nilocked() implies that the node is not yet
destroyed, which implies that BR_DECREFS has not been delivered to
userspace, so incrementing the weak refcount is valid.
Note that it's currently possible to trigger this condition if the owner
calls BINDER_THREAD_EXIT while node->has_weak_ref is true. This causes
BC_INCREFS on binder_ref instances to fail when they should not.
Cc: stable@vger.kernel.org
Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Reported-by: Yu-Ting Tseng <yutingtseng@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251015-binder-weak-inc-v1-1-7914b092c371@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mei_register() should move before the mei_start() for hook
on class device to work.
Same change was implemented in mei-me, missed from mei-txe.
Fixes: 7704e6be4ed2 ("mei: hook mei_device on class device")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251019073659.2646791-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The comedi_buf_munge() function performs a modulo operation
`async->munge_chan %= async->cmd.chanlist_len` without first
checking if chanlist_len is zero. If a user program submits a command with
chanlist_len set to zero, this causes a divide-by-zero error when the device
processes data in the interrupt handler path.
Add a check for zero chanlist_len at the beginning of the
function, similar to the existing checks for !map and
CMDF_RAWDATA flag. When chanlist_len is zero, update
munge_count and return early, indicating the data was
handled without munging.
This prevents potential kernel panics from malformed user commands.
Reported-by: syzbot+f6c3c066162d2c43a66c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f6c3c066162d2c43a66c
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20250924102639.1256191-1-kartikey406@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch kernel control flow integrity (kCFI) issues at
build time, there is an instance in the new mei late binding code
originating from the type parameter of mei_lb_push_payload():
drivers/misc/mei/mei_lb.c:211:18: error: incompatible function pointer types initializing 'int (*)(struct device *, u32, u32, const void *, size_t)' (aka 'int (*)(struct device *, unsigned int, unsigned int, const void *, unsigned long)') with an expression of type 'int (struct device *, enum intel_lb_type, u32, const void *, size_t)' (aka 'int (struct device *, enum intel_lb_type, unsigned int, const void *, unsigned long)') [-Werror,-Wincompatible-function-pointer-types-strict]
211 | .push_payload = mei_lb_push_payload,
| ^~~~~~~~~~~~~~~~~~~
While 'unsigned int' and 'enum intel_lb_type' are ABI compatible, hence
no regular warning from -Wincompatible-function-pointer-types, the
mismatch will trigger a kCFI violation when mei_lb_push_payload() is
called indirectly.
Update the type parameter of mei_lb_push_payload() to be 'u32' to match
the prototype in 'struct intel_lb_component_ops', clearing up the
warning and kCFI violation.
Fixes: 741eeabb7c78 ("mei: late_bind: add late binding component driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250920-drm-xe-fix-wifpts-v1-1-c89b5357c7ba@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In fastrpc_map_lookup, dma_buf_get is called to obtain a reference to
the dma_buf for comparison purposes. However, this reference is never
released when the function returns, leading to a dma_buf memory leak.
Fix this by adding dma_buf_put before returning from the function,
ensuring that the temporarily acquired reference is properly released
regardless of whether a matching map is found.
Fixes: 9031626ade38 ("misc: fastrpc: Fix fastrpc_map_lookup operation")
Cc: stable@kernel.org
Signed-off-by: Junhao Xie <bigfoot@radxa.com>
Tested-by: Xilin Wu <sophon@radxa.com>
Rule: add
Link: https://lore.kernel.org/stable/48B368FB4C7007A7%2B20251017083906.3259343-1-bigfoot%40radxa.com
Link: https://patch.msgid.link/48B368FB4C7007A7+20251017083906.3259343-1-bigfoot@radxa.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Wildcat Lake P device id.
Cc: stable@vger.kernel.org
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251016125912.2146136-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a sentence to the driver description to clarify that the sbrmi-i2c
driver is intended to run on the BMC and not on the managed node. Add
platform dependencies accordingly.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/5c9f7100-0e59-4237-a252-43c3ee4802a2@amd.com
Link: https://patch.msgid.link/20251016155040.0e86c102@endymion
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The nvmem-rcar-efuse driver can be compiled as a module. Add missing
MODULE_DEVICE_TABLE so it can be matched by modalias and automatically
loaded by udev.
Cc: stable@vger.kernel.org
Fixes: 1530b923a514 ("nvmem: Add R-Car E-FUSE driver")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250919142856.2313927-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 290434474c332a2ba9c8499fe699c7f2e1153280.
That commit broke cache=mmap, a mode that doesn't cache metadata,
but still has writeback cache.
In commit 290434474c33 ("fs/9p: Refresh metadata in d_revalidate
for uncached mode too") we considered metadata cache to be enough to
not look at the server, but in writeback cache too looking at the server
size would make the vfs consider the file has been truncated before the
data has been flushed out, making the following repro fail (nothing is
ever read back, the resulting file ends up with no data written)
```
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
char buf[4096];
int main(int argc, char *argv[])
{
int ret, i;
int fdw, fdr;
if (argc < 2)
return 1;
fdw = openat(AT_FDCWD, argv[1], O_RDWR|O_CREAT|O_EXCL|O_CLOEXEC, 0600);
if (fdw < 0) {
fprintf(stderr, "cannot open fdw\n");
return 1;
}
write(fdw, buf, sizeof(buf));
fdr = openat(AT_FDCWD, argv[1], O_RDONLY|O_CLOEXEC);
if (fdr < 0) {
fprintf(stderr, "cannot open fdr\n");
close(fdw);
return 1;
}
for (i = 0; i < 10; i++) {
ret = read(fdr, buf, sizeof(buf));
fprintf(stderr, "i: %d, read returns %d\n", i, ret);
}
close(fdr);
close(fdw);
return 0;
}
```
There is a fix for this particular reproducer but it looks like there
are other problems around metadata refresh (e.g. around file rename), so
revert this to avoid d_revalidate in uncached mode for now.
Reported-by: Song Liu <song@kernel.org>
Link: https://lkml.kernel.org/r/CAHzjS_u_SYdt5=2gYO_dxzMKXzGMt-TfdE_ueowg-Hq5tRCAiw@mail.gmail.com
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Link: https://lore.kernel.org/bpf/CAEf4BzZbCE4tLoDZyUf_aASpgAGFj75QMfSXX4a4dLYixnOiLg@mail.gmail.com/
Fixes: 290434474c33 ("fs/9p: Refresh metadata in d_revalidate for uncached mode too")
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
hibmcge uses fixed_phy_register() et al, but doesn't cater for the case
that hibmcge is built-in and fixed_phy is a module. To solve this
select FIXED_PHY.
Fixes: 1d7cd7a9c69c ("net: hibmcge: support scenario without PHY")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/c4fc061f-b6d5-418b-a0dc-6b238cdbedce@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace `dev_kfree_skb()` with `dev_kfree_skb_any()` in `start_xmit()`
which can be called from netpoll (hard IRQ) and from other contexts.
Also, `np->link_status` can be changed at any time by interrupt handler.
<idle>-0 [011] dNh4. 4541.754603: start_xmit <-netpoll_start_xmit
<idle>-0 [011] dNh4. 4541.754622: <stack trace>
=> [FTRACE TRAMPOLINE]
=> start_xmit
=> netpoll_start_xmit
=> netpoll_send_skb
=> write_msg
=> console_flush_all
=> console_unlock
=> vprintk_emit
=> _printk
=> rio_interrupt
=> __handle_irq_event_percpu
=> handle_irq_event
=> handle_fasteoi_irq
=> __common_interrupt
=> common_interrupt
=> asm_common_interrupt
=> mwait_idle
=> default_idle_call
=> do_idle
=> cpu_startup_entry
=> start_secondary
=> common_startup_64
This issue can occur when the link state changes from off to on
(e.g., plugging or unplugging the LAN cable) while transmitting a
packet. If the skb has a destructor, a warning message may be
printed in this situation.
-> consume_skb (dev_kfree_skb())
-> __kfree_skb()
-> skb_release_all()
-> skb_release_head_state(skb)
if (skb->destructor) {
DEBUG_NET_WARN_ON_ONCE(in_hardirq());
skb->destructor(skb);
}
Found by inspection.
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-on: D-Link DGE-550T Rev-A3
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251019075540.55697-1-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-10-20
All patches are by me. The first 3 update the bxcan, esd and rockchip
driver to drop skbs in xmit of the device is in listen only mode.
The last patch targets the CAN netlink implementation to allow the
disabling of automatic restart after Bus-Off, even if the a driver
doesn't implement that callback.
* tag 'linux-can-fixes-for-6.18-20251020' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: netlink: can_changelink(): allow disabling of automatic restart
can: rockchip-canfd: rkcanfd_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
can: esd: acc_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
can: bxcan: bxcan_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
====================
Link: https://patch.msgid.link/20251020152516.1590553-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the mailing list subscription information for the linux-hams
mailing list.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251020052716.3136773-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found that the local_unlock_nested_bh() call was
missing in some cases.
WARNING: possible recursive locking detected
syzkaller #0 Not tainted
--------------------------------------------
syz.2.329/7421 is trying to acquire lock:
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:44 [inline]
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: gro_cells_receive+0x404/0x790 net/core/gro_cells.c:30
but task is already holding lock:
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:44 [inline]
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: gro_cells_receive+0x404/0x790 net/core/gro_cells.c:30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock((&cell->bh_lock));
lock((&cell->bh_lock));
*** DEADLOCK ***
Given the introduction of @have_bh_lock variable, it seems the author
intent was to have the local_unlock_nested_bh() after the @unlock label.
Fixes: 25718fdcbdd2 ("net: gro_cells: Use nested-BH locking for gro_cell")
Reported-by: syzbot+f9651b9a8212e1c8906f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68f65eb9.a70a0220.205af.0034.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20251020161114.1891141-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: handle late ADD_ADDR + selftests skip
Here are a few independent fixes related to MPTCP and its selftests:
- Patch 1: correctly handle ADD_ADDR being received after the switch to
'fully-established'. A fix for another recent fix backported up to
v5.14.
- Patches 2-5: properly mark some MPTCP Join subtests as 'skipped' if
the tested kernel doesn't support the feature being validated. Some
fixes for up to v5.13, v5.18, v6.11 and v6.18-rc1 respectively.
====================
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-0-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: c912f935a5c7 ("selftests: mptcp: join: validate new laminar endp")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-5-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-4-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: 36c4127ae8dd ("selftests: mptcp: join: skip implicit tests if not supported")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-3-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: e06959e9eebd ("selftests: mptcp: join: test for flush/re-add endpoints")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-2-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The special C-flag case expects the ADD_ADDR to be received when
switching to 'fully-established'. But for various reasons, the ADD_ADDR
could be sent after the "4th ACK", and the special case doesn't work.
On NIPA, the new test validating this special case for the C-flag failed
a few times, e.g.
102 default limits, server deny join id 0
syn rx [FAIL] got 0 JOIN[s] syn rx expected 2
Server ns stats
(...)
MPTcpExtAddAddrTx 1
MPTcpExtEchoAdd 1
Client ns stats
(...)
MPTcpExtAddAddr 1
MPTcpExtEchoAddTx 1
synack rx [FAIL] got 0 JOIN[s] synack rx expected 2
ack rx [FAIL] got 0 JOIN[s] ack rx expected 2
join Rx [FAIL] see above
syn tx [FAIL] got 0 JOIN[s] syn tx expected 2
join Tx [FAIL] see above
I had a suspicion about what the issue could be: the ADD_ADDR might have
been received after the switch to the 'fully-established' state. The
issue was not easy to reproduce. The packet capture shown that the
ADD_ADDR can indeed be sent with a delay, and the client would not try
to establish subflows to it as expected.
A simple fix is not to mark the endpoints as 'used' in the C-flag case,
when looking at creating subflows to the remote initial IP address and
port. In this case, there is no need to try.
Note: newly added fullmesh endpoints will still continue to be used as
expected, thanks to the conditions behind mptcp_pm_add_addr_c_flag_case.
Fixes: 4b1ff850e0c1 ("mptcp: pm: in-kernel: usable client side with C-flag")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-1-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The initial m.delta[0] also needs to be checked against zero.
In addition, also drop the redundant logic that errors out for
lcn == 0 / m.delta[0] == 1 case.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Robert reported an infinite loop observed by two crafted images.
The root cause is that `clusterofs` can be larger than `lclustersize`
for !NONHEAD `lclusters` in corrupted subpage compact indexes, e.g.:
blocksize = lclustersize = 512 lcn = 6 clusterofs = 515
Move the corresponding check for full compress indexes to
`z_erofs_load_lcluster_from_disk()` to also cover subpage compact
compress indexes.
It also fixes the position of `m->type >= Z_EROFS_LCLUSTER_TYPE_MAX`
check, since it should be placed right after
`z_erofs_load_{compact,full}_lcluster()`.
Fixes: 8d2517aaeea3 ("erofs: fix up compacted indexes for block size < 4096")
Fixes: 1a5223c182fd ("erofs: do sanity check on m->type in z_erofs_load_compact_lcluster()")
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/r/35167.1760645886@localhost
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Recent changes require the raw folio flags to be accessed via ".f". The
merge commit introducing this change adapted most architecture code but
forgot the csky abiv2.
[rppt@kernel.org: add fix for arch/csky/abiv2/cacheflush.c]
Link: https://lkml.kernel.org/r/aPCE238oxAB9QcZa@kernel.org
Fixes: 53fbef56e07d ("mm: introduce memdesc_flags_t")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When damos_commit_quota_goals() is called for adding new DAMOS quota goals
of DAMOS_QUOTA_USER_INPUT metric, current_value fields of the new goals
should be also set as requested.
However, damos_commit_quota_goals() is not updating the field for the
case, since it is setting only metrics and target values using
damos_new_quota_goal(), and metric-optional union fields using
damos_commit_quota_goal_union(). As a result, users could see the first
current_value parameter that committed online with a new quota goal is
ignored. Users are assumed to commit the current_value for
DAMOS_QUOTA_USER_INPUT quota goals, since it is being used as a feedback.
Hence the real impact would be subtle. That said, this is obviously not
intended behavior.
Fix the issue by using damos_commit_quota_goal() which sets all quota goal
parameters, instead of damos_commit_quota_goal_union(), which sets only
the union fields.
Link: https://lkml.kernel.org/r/20251014001846.279282-1-sj@kernel.org
Fixes: 1aef9df0ee90 ("mm/damon/core: commit damos_quota_goal->nid")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
damon_destroy_scheme
Currently, damon_destroy_scheme() only cleans up the filter list but
leaves ops_filter untouched, which could lead to memory leaks when a
scheme is destroyed.
This patch ensures both filter and ops_filter are properly freed in
damon_destroy_scheme(), preventing potential memory leaks.
Link: https://lkml.kernel.org/r/20251014084225.313313-1-lienze@kylinos.cn
Fixes: ab82e57981d0 ("mm/damon/core: introduce damos->ops_filters")
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Tested-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When hugetlb_vmdelete_list() processes VMAs during truncate operations, it
may encounter VMAs where huge_pmd_unshare() is called without the required
shareable lock. This triggers an assertion failure in
hugetlb_vma_assert_locked().
The previous fix in commit dd83609b8898 ("hugetlbfs: skip VMAs without
shareable locks in hugetlb_vmdelete_list") skipped entire VMAs without
shareable locks to avoid the assertion. However, this prevented pages
from being unmapped and freed, causing a regression in
fallocate(PUNCH_HOLE) operations where pages were not freed immediately,
as reported by Mark Brown.
Instead of checking locks in the caller or skipping VMAs, move the lock
assertions in huge_pmd_unshare() to after the early return checks. The
assertions are only needed when actual PMD unsharing work will be
performed. If the function returns early because sz != PMD_SIZE or the
PMD is not shared, no locks are required and assertions should not fire.
This approach reverts the VMA skipping logic from commit dd83609b8898
("hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list")
while moving the assertions to avoid the assertion failure, keeping all
the logic within huge_pmd_unshare() itself and allowing page unmapping and
freeing to proceed for all VMAs.
Link: https://lkml.kernel.org/r/20251014113344.21194-1-kartikey406@gmail.com
Fixes: dd83609b8898 ("hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reported-by: <syzbot+f26d7c75c26ec19790e7@syzkaller.appspotmail.com>
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://syzkaller.appspot.com/bug?extid=f26d7c75c26ec19790e7
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Oscar Salvador <osalvador@suse.de>
Tested-by: <syzbot+f26d7c75c26ec19790e7@syzkaller.appspotmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When migrating a balloon page, we first deflate the old page to then
inflate the new page.
However, if inflating the new page succeeded, we effectively deflated the
old page, reducing the balloon size.
In that case, the migration actually worked: similar to migrating+
immediately deflating the new page. The old page will be freed back to
the buddy.
Right now, the core will leave the page be marked as isolated (as we
returned an error). When later trying to putback that page, we will run
into the WARN_ON_ONCE() in balloon_page_putback().
That handling was changed in commit 3544c4faccb8 ("mm/balloon_compaction:
stop using __ClearPageMovable()"); before that change, we would have
tolerated that way of handling it.
To fix it, let's just return 0 in that case, making the core effectively
just clear the "isolated" flag + freeing it back to the buddy as if the
migration succeeded. Note that the new page will also get freed when the
core puts the last reference.
Note that this also makes it all be more consistent: we will no longer
unisolate the page in the balloon driver while keeping it marked as being
isolated in migration core.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251014124455.478345-1-david@redhat.com
Fixes: 3544c4faccb8 ("mm/balloon_compaction: stop using __ClearPageMovable()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Each damon_ctx maintains callback requests using a linked list
(damon_ctx->call_controls). When a new callback request is received via
damon_call(), the new request should be added to the list. However, the
function is making a mistake at list_add_tail() invocation: putting the
new item to add and the list head to add it before, in the opposite order.
Because of the linked list manipulation implementation, the new request
can still be reached from the context's list head. But the list items
that were added before the new request are dropped from the list.
As a result, the callbacks are unexpectedly not invocated. Worse yet, if
the dropped callback requests were dynamically allocated, the memory is
leaked. Actually DAMON sysfs interface is using a dynamically allocated
repeat-mode callback request for automatic essential stats update. And
because the online DAMON parameters commit is using a non-repeat-mode
callback request, the issue can easily be reproduced, like below.
# damo start --damos_action stat --refresh_stat 1s
# damo tune --damos_action stat --refresh_stat 1s
The first command dynamically allocates the repeat-mode callback request
for automatic essential stat update. Users can see the essential stats
are automatically updated for every second, using the sysfs interface.
The second command calls damon_commit() with a new callback request that
was made for the commit. As a result, the previously added repeat-mode
callback request is dropped from the list. The automatic stats refresh
stops working, and the memory for the repeat-mode callback request is
leaked. It can be confirmed using kmemleak.
Fix the mistake on the list_add_tail() call.
Link: https://lkml.kernel.org/r/20251014205939.1206-1-sj@kernel.org
Fixes: 004ded6bee11 ("mm/damon: accept parallel damon_call() requests")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit b714ccb02a76 ("mm/mremap: complete refactor of move_vma()")
mistakenly introduced a new behaviour - clearing the VM_ACCOUNT flag of
the old mapping when a mapping is mremap()'d with the MREMAP_DONTUNMAP
flag set.
While we always clear the VM_LOCKED and VM_LOCKONFAULT flags for the old
mapping (the page tables have been moved, so there is no data that could
possibly be locked in memory), there is no reason to touch any other VMA
flags.
This is because after the move the old mapping is in a state as if it were
freshly mapped. This implies that the attributes of the mapping ought to
remain the same, including whether or not the mapping is accounted.
Link: https://lkml.kernel.org/r/20251013165836.273113-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Fixes: b714ccb02a76 ("mm/mremap: complete refactor of move_vma()")
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull VFIO fixlet from Alex Williamson:
"A tiny update as I'm changing jobs. Different email, same signing key
for now.
- Update VFIO maintainers entry (Alex Williamson)"
* tag 'vfio-v6.18-rc3' of https://github.com/awilliam/linux-vfio:
MAINTAINERS: Update Alex Williamson's email address
|
|
Current pte_mkwrite_novma() makes PTE dirty unconditionally. This may
mark some pages that are never written dirty wrongly. For example,
do_swap_page() may map the exclusive pages with writable and clean PTEs
if the VMA is writable and the page fault is for read access.
However, current pte_mkwrite_novma() implementation always dirties the
PTE. This may cause unnecessary disk writing if the pages are
never written before being reclaimed.
So, change pte_mkwrite_novma() to clear the PTE_RDONLY bit only if the
PTE_DIRTY bit is set to make it possible to make the PTE writable and
clean.
The current behavior was introduced in commit 73e86cb03cf2 ("arm64:
Move PTE_RDONLY bit handling out of set_pte_at()"). Before that,
pte_mkwrite() only sets the PTE_WRITE bit, while set_pte_at() only
clears the PTE_RDONLY bit if both the PTE_WRITE and the PTE_DIRTY bits
are set.
To test the performance impact of the patch, on an arm64 server
machine, run 16 redis-server processes on socket 1 and 16
memtier_benchmark processes on socket 0 with mostly get
transactions (that is, redis-server will mostly read memory only).
The memory footprint of redis-server is larger than the available
memory, so swap out/in will be triggered. Test results show that the
patch can avoid most swapping out because the pages are mostly clean.
And the benchmark throughput improves ~23.9% in the test.
Fixes: 73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()")
Signed-off-by: Huang Ying <ying.huang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When ACPI_MISALIGNMENT_NOT_SUPPORTED is set, GCC can produce a bogus
-Wstringop-overread warning, see [1].
To me, it's very clear that we have a compiler bug here, thus just
disable the warning.
Fixes: a9d13433fe17 ("LoongArch: Align ACPI structures if ARCH_STRICT_ALIGN enabled")
Link: https://lore.kernel.org/all/899f2dec-e8b9-44f4-ab8d-001e160a2aed@roeck-us.net/
Link: https://github.com/acpica/acpica/commit/abf5b573
Link: https://gcc.gnu.org/PR122073 [1]
Co-developed-by: Saket Dumbre <saket.dumbre@intel.com>
Signed-off-by: Saket Dumbre <saket.dumbre@intel.com>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20251021092825.822007-1-xry111@xry111.site
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
schedule_dc_vmin_vmax() is called by dm_crtc_high_irq(). Hence, we
cannot have the former sleep. Use GFP_NOWAIT for allocation in this
function.
Fixes: c210b757b400 ("drm/amd/display: fix dmub access race condition")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c04812cbe2f247a1c1e53a9b6c5e659963fe4065)
Cc: stable@vger.kernel.org
|
|
[why]
1.) dc->links[MAX_LINKS] array size smaller than actual requested.
max_connector + max_dpia + 4 virtual = 14.
increase from 12 to 14.
2.) hw_init() access null LINK_ENC for dpia non display_endpoint.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d7f5a61e1b04ed87b008c8d327649d184dc5bb45)
Cc: stable@vger.kernel.org
|
|
[Why]
On a mst branch with multi display setup, dc context is obselete
after updating the first stream. Referencing the same dc context
for the next stream update to fetch dc pointer leads to NULL
pointer dereference.
[How]
Get the dc pointer from the link rather than context.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dc69b48988b171d6ccb3a083607e4dff015e2c0d)
Cc: stable@vger.kernel.org
|
|
If two competing threads enter alloc_slab_obj_exts() and one of them
fails to allocate the object extension vector, it might override the
valid slab->obj_exts allocated by the other thread with
OBJEXTS_ALLOC_FAIL. This will cause the thread that lost this race and
expects a valid pointer to dereference a NULL pointer later on.
Update slab->obj_exts atomically using cmpxchg() to avoid
slab->obj_exts overrides by racing threads.
Thanks for Vlastimil and Suren's help with debugging.
Fixes: f7381b911640 ("slab: mark slab->obj_exts allocation failures unconditionally")
Cc: <stable@vger.kernel.org>
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20251021010353.1187193-1-hao.ge@linux.dev
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
When retbleed mitigation is disabled, the kernel already prints an info
message that the system is vulnerable. Recent code restructuring also
inadvertently led to RETBLEED_INTEL_MSG being printed as an error, which is
unnecessary as retbleed mitigation was already explicitly disabled (by config
option, cmdline, etc.).
Qualify this print statement so the warning is not printed unless an actual
retbleed mitigation was selected and is being disabled due to incompatibility
with spectre_v2.
Fixes: e3b78a7ad5ea ("x86/bugs: Restructure retbleed mitigation")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220624
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251003171936.155391-1-david.kaplan@amd.com
|
|
Resolve race conditions in timestamp events list handling between TX
and RX paths causing missed timestamps.
The current implementation uses a single events list for both TX and RX
timestamps. The am65_cpts_find_ts() function acquires the lock,
splices all events (TX as well as RX events) to a temporary list,
and releases the lock. This function performs matching of timestamps
for TX packets only. Before it acquires the lock again to put the
non-TX events back to the main events list, a concurrent RX
processing thread could acquire the lock (as observed in practice),
find an empty events list, and fail to attach timestamp to it,
even though a relevant event exists in the spliced list which is yet to
be restored to the main list.
Fix this by creating separate events lists to handle TX and RX
timestamps independently.
Fixes: c459f606f66df ("net: ethernet: ti: am65-cpts: Enable RX HW timestamp for PTP packets using CPTS FIFO")
Signed-off-by: Aksh Garg <a-garg7@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20251016115755.1123646-1-a-garg7@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
... to match AMD's statement here:
https://www.amd.com/en/resources/product-security/bulletin/amd-sb-7033.html
Fixes: 50cef76d5cb0 ("x86/microcode/AMD: Load only SHA256-checksummed patches")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/20251020144124.2930784-1-andrew.cooper3@citrix.com
|
|
Attempting to load the pci-idio-16 module fails during regmap
initialization with a return error -EINVAL. This is a result of the
regmap cache failing initialization. Set the idio_16_regmap_config
max_register member to fix this failure.
Fixes: 73d8f3efc5c2 ("gpio: pci-idio-16: Migrate to the regmap API")
Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com
Suggested-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-2-ebeb50e93c33@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Attempting to load the 104-idio-16 module fails during regmap
initialization with a return error -EINVAL. This is a result of the
regmap cache failing initialization. Set the idio_16_regmap_config
max_register member to fix this failure.
Fixes: 2c210c9a34a3 ("gpio: 104-idio-16: Migrate to the regmap API")
Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com
Suggested-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-1-ebeb50e93c33@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
With enough debug options enabled, struct xfs_mount is larger
than 4k and thus NOFAIL allocations won't work for it.
xfs_init_fs_context is early in the mount process, and if we really
are out of memory there we'd better give up ASAP anyway.
Fixes: 7b77b46a6137 ("xfs: use kmem functions for struct xfs_mount")
Reported-by: syzbot+359a67b608de1ef72f65@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The MRU cache for open zones is unfortunately still not ideal, as it can
time out pretty easily when doing heavy I/O to hard disks using up most
or all open zones. One option would be to just increase the timeout,
but while looking into that I realized we're just better off caching it
indefinitely as there is no real downside to that once we don't hold a
reference to the cache open zone.
So switch the open zone to RCU freeing, and then stash the last used
open zone into inode->i_private. This helps to significantly reduce
fragmentation by keeping I/O localized to zones for workloads that
write using many open files to HDD.
Fixes: 4e4d52075577 ("xfs: add the zoned space allocator")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
When GCD has no new work to handle, but read, write or reset commands
are outstanding, it currently busy loops, which is a bit suboptimal,
and can lead to softlockup warnings in case of stuck commands.
Change the code so that the task state is only set to running when work
is performed, which looks a bit tricky due to the design of the
reading/writing/resetting lists that contain both in-flight and finished
commands.
Fixes: 080d01c41d44 ("xfs: implement zoned garbage collection")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
When using page list framebuffer, and using RGB888 format, some
pixels can cross the page boundaries, and this case was not handled,
leading to writing 1 or 2 bytes on the next virtual address.
Add a check and a specific function to handle this case.
Fixes: c9ff2808790f0 ("drm/panic: Add support to scanout buffer as array of pages")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251009122955.562888-7-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
|
|
In the unlikely case that the screen is tiny, and smaller than the
font width, it leads to a divide by 0:
draw_line_with_wrap()
chars_per_row = sb->width / font->width = 0
line_wrap.len = line->len % chars_per_row;
This will trigger a divide by 0
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251009122955.562888-6-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
|
|
The rectangle height was larger than the screen size. This has no
real impact.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251009122955.562888-5-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
|
|
Depending on qr_code size and screen size, the vertical margin can
be negative, that means there is not enough room to draw the qr_code.
So abort early, to avoid a segfault by trying to draw at negative
coordinates.
Fixes: cb5164ac43d0f ("drm/panic: Add a QR code panic screen")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251009122955.562888-4-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
|
