| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
tpm2_read_public() has some rudimentary range checks but the function does
not ensure that the response buffer has enough bytes for the full TPMT_HA
payload.
Re-implement the function with necessary checks and validation, and return
name and name size for all handle types back to the caller.
Cc: stable@vger.kernel.org # v6.10+
Fixes: d0a25bb961e6 ("tpm: Add HMAC session name/handle append")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
|
|
'name_size' does not have any range checks, and it just directly indexes
with TPM_ALG_ID, which could lead into memory corruption at worst.
Address the issue by only processing known values and returning -EINVAL for
unrecognized values.
Make also 'tpm_buf_append_name' and 'tpm_buf_fill_hmac_session' fallible so
that errors are detected before causing any spurious TPM traffic.
End also the authorization session on failure in both of the functions, as
the session state would be then by definition corrupted.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 1085b8276bb4 ("tpm: Add the rest of the session HMAC API")
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux
Pull capabilities update from Serge Hallyn:
"Ryan Foster had sent a patch to add testing of the
rootid_owns_currentns() function. That patch pointed out
that this function was not as clear as it should be. Fix it:
- Clarify the intent of the function in the name
- Split the function so that the base functionality is easier to test
from a kunit test"
* tag 'caps-pr-20251204' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux:
Clarify the rootid_owns_currentns
|
|
Pull NVMe updates from Keith:
"- Subsystem usage cleanups (Max)
- Endpoint device fixes (Shin'ichiro)
- Debug statements (Gerd)
- FC fabrics cleanups and fixes (Daniel)
- Consistent alloc API usages (Israel)
- Code comment updates (Chu)
- Authentication retry fix (Justin)"
* tag 'nvme-6.19-2025-12-04' of git://git.infradead.org/nvme:
nvme-fabrics: add ENOKEY to no retry criteria for authentication failures
nvme-auth: use kvfree() for memory allocated with kvcalloc()
nvmet-tcp: use kvcalloc for commands array
nvmet-rdma: use kvcalloc for commands and responses arrays
nvme: fix typo error in nvme target
nvmet-fc: use pr_* print macros instead of dev_*
nvmet-fcloop: remove unused lsdir member.
nvmet-fcloop: check all request and response have been processed
nvme-fc: check all request and response have been processed
nvme-fc: don't hold rport lock when putting ctrl
nvme-pci: add debug message on fail to read CSTS
nvme-pci: print error message on failure in nvme_probe
nvmet: pci-epf: fix DMA channel debug print
nvmet: pci-epf: move DMA initialization to EPC init callback
nvmet: remove redundant subsysnqn field from ctrl
nvmet: add sanity checks when freeing subsystem
|
|
Pull more drm updates from Dave Airlie:
"There was some additional intel code for color operations we wanted to
land. However I discovered I missed a pull for the xe vfio driver
which I had sorted into 6.20 in my brain, until Thomas mentioned it.
This contains the xe vfio code, a bunch of xe fixes that were waiting
and the i915 color management support. I'd like to include it as part
of keeping the two main vendors on the same page and giving a good
cross-driver experience for userspace when it starts using it.
vfio:
- add a vfio_pci variant driver for Intel
xe/i915 display:
- add plane color management support
xe:
- Add scope-based cleanup helper for runtime PM
- vfio xe driver prerequisites and exports
- fix vfio link error
- Fix a memory leak
- Fix a 64-bit division
- vf migration fix
- LRC pause fix"
* tag 'drm-next-2025-12-05' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/i915/color: Enable Plane Color Pipelines
drm/i915/color: Add 3D LUT to color pipeline
drm/i915/color: Add registers for 3D LUT
drm/i915/color: Program Plane Post CSC Registers
drm/i915/color: Program Pre-CSC registers
drm/i915/color: Add framework to program PRE/POST CSC LUT
drm/i915: Add register definitions for Plane Post CSC
drm/i915: Add register definitions for Plane Degamma
drm/i915/color: Add plane CTM callback for D12 and beyond
drm/i915/color: Preserve sign bit when int_bits is Zero
drm/i915/color: Add framework to program CSC
drm/i915/color: Create a transfer function color pipeline
drm/i915/color: Add helper to create intel colorop
drm/i915: Add intel_color_op
drm/i915/display: Add identifiers for driver specific blocks
drm/xe/pf: fix VFIO link error
drm/xe: Protect against unset LRC when pausing submissions
drm/xe/vf: Start re-emission from first unsignaled job during VF migration
drm/xe/pf: Use div_u64 when calculating GGTT profile
drm/xe: Fix memory leak when handling pagefault vma
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"This contains changes to unify TPM return code translation between
trusted_tpm2 and TPM driver itself. Other than that the changes are
either bug fixes or minor imrovements"
* tag 'tpmdd-next-6.19-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: Use tpm_ret_to_err() in trusted_tpm2
tpm: Use -EPERM as fallback error code in tpm_ret_to_err
tpm: Cap the number of PCR banks
tpm: Remove tpm_find_get_ops
tpm: add WQ_PERCPU to alloc_workqueue users
tpm_crb: add missing loc parameter to kerneldoc
tpm_crb: Fix a spelling mistake
selftests: tpm2: Fix ill defined assertions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Add DT binding for the Eswin EIC7700 SoC SATA Controller (Yulin Lu)
- Allow 'iommus' property in the Synopsys DWC AHCI SATA controller DT
binding (Rob Herring)
- Replace deprecated strcpy with strscpy in the pata_it821x driver
(Thorsten Blum)
- Add Iomega Clik! PCMCIA ATA/ATAPI Adapter PCMCIA ID to the
pata_pcmcia driver (René Rebe)
- Add ATA_QUIRK_NOLPM quirk for two Silicon Motion SSDs with broken LPM
support (me)
- Add flag WQ_PERCPU to the workqueue in the libata-sff helper library
to explicitly request the use of the per-CPU behavior (Marco
Crivellari)
* tag 'ata-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Disable LPM on Silicon Motion MD619{H,G}XCLDE3TC
ata: pata_pcmcia: Add Iomega Clik! PCMCIA ATA/ATAPI Adapter
ata: libata-sff: add WQ_PERCPU to alloc_workqueue users
dt-bindings: ata: snps,dwc-ahci: Allow 'iommus' property
ata: pata_it821x: Replace deprecated strcpy with strscpy in it821x_display_disk
dt-bindings: ata: eswin: Document for EIC7700 SoC ahci
|
|
Pull virtio updates from Michael Tsirkin:
"Just a bunch of fixes and cleanups, mostly very simple. Several
features were merged through net-next this time around"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci: drop kernel.h
vhost: switch to arrays of feature bits
vhost/test: add test specific macro for features
virtio: clean up features qword/dword terms
vduse: add WQ_PERCPU to alloc_workqueue users
virtio_balloon: add WQ_PERCPU to alloc_workqueue users
vdpa/pds: use %pe for ERR_PTR() in event handler registration
vhost: Fix kthread worker cgroup failure handling
virtio: vdpa: Fix reference count leak in octep_sriov_enable()
vdpa/mlx5: Fix incorrect error code reporting in query_virtqueues
virtio: fix map ops comment
virtio: fix virtqueue_set_affinity() docs
virtio: standardize Returns documentation style
virtio: fix grammar in virtio_map_ops docs
virtio: fix grammar in virtio_queue_info docs
virtio: fix whitespace in virtio_config_ops
virtio: fix typo in virtio_device_ready() comment
virtio: fix kernel-doc for mapping/free_coherent functions
virtio_vdpa: fix misleading return in void function
|
|
Pull rdma updates from Jason Gunthorpe:
"This has another new RDMA driver 'bng_en' for latest generation
Broadcom NICs. There might be one more new driver still to come.
Otherwise it is a fairly quite cycle. Summary:
- Minor driver bug fixes and updates to cxgb4, rxe, rdmavt, bnxt_re,
mlx5
- Many bug fix patches for irdma
- WQ_PERCPU annotations and system_dfl_wq changes
- Improved mlx5 support for "other eswitches" and multiple PFs
- 1600Gbps link speed reporting support. Four Digits Now!
- New driver bng_en for latest generation Broadcom NICs
- Bonding support for hns
- Adjust mlx5's hmm based ODP to work with the very large address
space created by the new 5 level paging default on x86
- Lockdep fixups in rxe and siw"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (65 commits)
RDMA/rxe: reclassify sockets in order to avoid false positives from lockdep
RDMA/siw: reclassify sockets in order to avoid false positives from lockdep
RDMA/bng_re: Remove prefetch instruction
RDMA/core: Reduce cond_resched() frequency in __ib_umem_release
RDMA/irdma: Fix SRQ shadow area address initialization
RDMA/irdma: Remove doorbell elision logic
RDMA/irdma: Do not set IBK_LOCAL_DMA_LKEY for GEN3+
RDMA/irdma: Do not directly rely on IB_PD_UNSAFE_GLOBAL_RKEY
RDMA/irdma: Add missing mutex destroy
RDMA/irdma: Fix SIGBUS in AEQ destroy
RDMA/irdma: Add a missing kfree of struct irdma_pci_f for GEN2
RDMA/irdma: Fix data race in irdma_free_pble
RDMA/irdma: Fix data race in irdma_sc_ccq_arm
RDMA/mlx5: Add support for 1600_8x lane speed
RDMA/core: Add new IB rate for XDR (8x) support
IB/mlx5: Reduce IMR KSM size when 5-level paging is enabled
RDMA/bnxt_re: Pass correct flag for dma mr creation
RDMA/bnxt_re: Fix the inline size for GenP7 devices
RDMA/hns: Support reset recovery for bond
RDMA/hns: Support link state reporting for bond
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"This is a pretty consequential cycle for iommufd, though this pull is
not too big. It is based on a shared branch with VFIO that introduces
VFIO_DEVICE_FEATURE_DMA_BUF a DMABUF exporter for VFIO device's MMIO
PCI BARs. This was a large multiple series journey over the last year
and a half.
Based on that work IOMMUFD gains support for VFIO DMABUF's in its
existing IOMMU_IOAS_MAP_FILE, which closes the last major gap to
support PCI peer to peer transfers within VMs.
In Joerg's iommu tree we have the "generic page table" work which aims
to consolidate all the duplicated page table code in every iommu
driver into a single algorithm. This will be used by iommufd to
implement unique page table operations to start adding new features
and improve performance.
In here:
- Expand IOMMU_IOAS_MAP_FILE to accept a DMABUF exported from VFIO.
This is the first step to broader DMABUF support in iommufd, right
now it only works with VFIO. This closes the last functional gap
with classic VFIO type 1 to safely support PCI peer to peer DMA by
mapping the VFIO device's MMIO into the IOMMU.
- Relax SMMUv3 restrictions on nesting domains to better support
qemu's sequence to have an identity mapping before the vSID is
established"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/arm-smmu-v3-iommufd: Allow attaching nested domain for GBPA cases
iommufd/selftest: Add some tests for the dmabuf flow
iommufd: Accept a DMABUF through IOMMU_IOAS_MAP_FILE
iommufd: Have iopt_map_file_pages convert the fd to a file
iommufd: Have pfn_reader process DMABUF iopt_pages
iommufd: Allow MMIO pages in a batch
iommufd: Allow a DMABUF to be revoked
iommufd: Do not map/unmap revoked DMABUFs
iommufd: Add DMABUF to iopt_pages
vfio/pci: Add vfio_pci_dma_buf_iommufd_map()
|
|
Pull VFIO updates from Alex Williamson:
- Move libvfio selftest artifacts in preparation of more tightly
coupled integration with KVM selftests (David Matlack)
- Fix comment typo in mtty driver (Chu Guangqing)
- Support for new hardware revision in the hisi_acc vfio-pci variant
driver where the migration registers can now be accessed via the PF.
When enabled for this support, the full BAR can be exposed to the
user (Longfang Liu)
- Fix vfio cdev support for VF token passing, using the correct size
for the kernel structure, thereby actually allowing userspace to
provide a non-zero UUID token. Also set the match token callback for
the hisi_acc, fixing VF token support for this this vfio-pci variant
driver (Raghavendra Rao Ananta)
- Introduce internal callbacks on vfio devices to simplify and
consolidate duplicate code for generating VFIO_DEVICE_GET_REGION_INFO
data, removing various ioctl intercepts with a more structured
solution (Jason Gunthorpe)
- Introduce dma-buf support for vfio-pci devices, allowing MMIO regions
to be exposed through dma-buf objects with lifecycle managed through
move operations. This enables low-level interactions such as a
vfio-pci based SPDK drivers interacting directly with dma-buf capable
RDMA devices to enable peer-to-peer operations. IOMMUFD is also now
able to build upon this support to fill a long standing feature gap
versus the legacy vfio type1 IOMMU backend with an implementation of
P2P support for VM use cases that better manages the lifecycle of the
P2P mapping (Leon Romanovsky, Jason Gunthorpe, Vivek Kasireddy)
- Convert eventfd triggering for error and request signals to use RCU
mechanisms in order to avoid a 3-way lockdep reported deadlock issue
(Alex Williamson)
- Fix a 32-bit overflow introduced via dma-buf support manifesting with
large DMA buffers (Alex Mastro)
- Convert nvgrace-gpu vfio-pci variant driver to insert mappings on
fault rather than at mmap time. This conversion serves both to make
use of huge PFNMAPs but also to both avoid corrected RAS events
during reset by now being subject to vfio-pci-core's use of
unmap_mapping_range(), and to enable a device readiness test after
reset (Ankit Agrawal)
- Refactoring of vfio selftests to support multi-device tests and split
code to provide better separation between IOMMU and device objects.
This work also enables a new test suite addition to measure parallel
device initialization latency (David Matlack)
* tag 'vfio-v6.19-rc1' of https://github.com/awilliam/linux-vfio: (65 commits)
vfio: selftests: Add vfio_pci_device_init_perf_test
vfio: selftests: Eliminate INVALID_IOVA
vfio: selftests: Split libvfio.h into separate header files
vfio: selftests: Move vfio_selftests_*() helpers into libvfio.c
vfio: selftests: Rename vfio_util.h to libvfio.h
vfio: selftests: Stop passing device for IOMMU operations
vfio: selftests: Move IOVA allocator into iova_allocator.c
vfio: selftests: Move IOMMU library code into iommu.c
vfio: selftests: Rename struct vfio_dma_region to dma_region
vfio: selftests: Upgrade driver logging to dev_err()
vfio: selftests: Prefix logs with device BDF where relevant
vfio: selftests: Eliminate overly chatty logging
vfio: selftests: Support multiple devices in the same container/iommufd
vfio: selftests: Introduce struct iommu
vfio: selftests: Rename struct vfio_iommu_mode to iommu_mode
vfio: selftests: Allow passing multiple BDFs on the command line
vfio: selftests: Split run.sh into separate scripts
vfio: selftests: Move run.sh into scripts directory
vfio/nvgrace-gpu: wait for the GPU mem to be ready
vfio/nvgrace-gpu: Inform devmem unmapped after reset
...
|
|
It turns out that the PCI driver for ccp is unconditionally built into the
kernel in the CONFIG_PCI=y case. This means that the new SEV-TIO support
needs an explicit dependency on PCI to avoid build errors when
CONFIG_CRYPTO_DEV_SP_PSP=y and CONFIG_PCI=n.
Reported-by: kernel test robot <lkp@intel.com>
Closes: http://lore.kernel.org/202512030743.6pVPA4sx-lkp@intel.com
Cc: Alexey Kardashevskiy <aik@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: John Allen <john.allen@amd.com>
Acked-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://patch.msgid.link/20251203031948.2471431-1-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
- Introduction of the generic IO page-table framework with support for
Intel and AMD IOMMU formats from Jason.
This has good potential for unifying more IO page-table
implementations and making future enhancements more easy. But this
also needed quite some fixes during development. All known issues
have been fixed, but my feeling is that there is a higher potential
than usual that more might be needed.
- Intel VT-d updates:
- Use right invalidation hint in qi_desc_iotlb()
- Reduce the scope of INTEL_IOMMU_FLOPPY_WA
- ARM-SMMU updates:
- Qualcomm device-tree binding updates for Kaanapali and Glymur SoCs
and a new clock for the TBU.
- Fix error handling if level 1 CD table allocation fails.
- Permit more than the architectural maximum number of SMRs for
funky Qualcomm mis-implementations of SMMUv2.
- Mediatek driver:
- MT8189 iommu support
- Move ARM IO-pgtable selftests to kunit
- Device leak fixes for a couple of drivers
- Random smaller fixes and improvements
* tag 'iommu-updates-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (81 commits)
iommupt/vtd: Support mgaw's less than a 4 level walk for first stage
iommupt/vtd: Allow VT-d to have a larger table top than the vasz requires
powerpc/pseries/svm: Make mem_encrypt.h self contained
genpt: Make GENERIC_PT invisible
iommupt: Avoid a compiler bug with sw_bit
iommu/arm-smmu-qcom: Enable use of all SMR groups when running bare-metal
iommupt: Fix unlikely flows in increase_top()
iommu/amd: Propagate the error code returned by __modify_irte_ga() in modify_irte_ga()
MAINTAINERS: Update my email address
iommu/arm-smmu-v3: Fix error check in arm_smmu_alloc_cd_tables
dt-bindings: iommu: qcom_iommu: Allow 'tbu' clock
iommu/vt-d: Restore previous domain::aperture_end calculation
iommu/vt-d: Fix unused invalidation hint in qi_desc_iotlb
iommu/vt-d: Set INTEL_IOMMU_FLOPPY_WA depend on BLK_DEV_FD
iommu/tegra: fix device leak on probe_device()
iommu/sun50i: fix device leak on of_xlate()
iommu/omap: simplify probe_device() error handling
iommu/omap: fix device leaks on probe_device()
iommu/mediatek-v1: add missing larb count sanity check
iommu/mediatek-v1: fix device leaks on probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link (CXL) updates from Dave Jiang:
"The additions of note are adding CXL region remove support for locked
CXL decoders, adding unit testing support for XOR address translation,
and adding unit testing support for extended linear cache.
Misc:
- Remove incorrect page-allocator quirk section in documentation
- Remove unused devm_cxl_port_enumerate_dports() function
- Fix typo in cdat.c code comment
- Replace use of system_wq with system_percpu_wq
- Add locked CXL decoder support for region removal
- Return when generic target updated
- Rename region_res_match_cxl_range() to spa_maps_hpa()
- Clarify comment in spa_maps_hpa()
Enable unit testing for XOR address translation of SPA to DPA and vice versa:
- Refactor address translation funcs for testing in cxl_region
- Make the XOR calculations available for testing
- Add cxl_translate module for address translation testing in
cxl_test
Extended Linear Cache changes:
- Add extended linear cache size sysfs attribute
- Adjust failure emission of extended linear cache detection in
cxl_acpi
- Added extended linear cache unit testing support in cxl_test
Preparation refactor patches for PRM translation support:
- Simplify cxl_rd_ops allocation and handling
- Group xor arithmetric setup code in a single block
- Remove local variable @inc in cxl_port_setup_targets()"
* tag 'cxl-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (22 commits)
cxl/test: Assign overflow_err_count from log->nr_overflow
cxl/test: Remove ret_limit race condition in mock_get_event()
cxl/test: remove unused mock function for cxl_rcd_component_reg_phys()
cxl/test: Add support for acpi extended linear cache
cxl/test: Add cxl_test CFMWS support for extended linear cache
cxl/test: Standardize CXL auto region size
cxl/region: Remove local variable @inc in cxl_port_setup_targets()
cxl/acpi: Group xor arithmetric setup code in a single block
cxl: Simplify cxl_rd_ops allocation and handling
cxl: Clarify comment in spa_maps_hpa()
cxl: Rename region_res_match_cxl_range() to spa_maps_hpa()
acpi/hmat: Return when generic target is updated
cxl: Add handling of locked CXL decoder
cxl/region: Add support to indicate region has extended linear cache
cxl: Adjust extended linear cache failure emission in cxl_acpi
cxl/test: Add cxl_translate module for address translation testing
cxl/acpi: Make the XOR calculations available for testing
cxl/region: Refactor address translation funcs for testing
cxl/pci: replace use of system_wq with system_percpu_wq
cxl: fix typos in cdat.c comments
...
|
|
After commit 3225f52cde56 ("PCI/TSM: Establish Secure Sessions and Link
Encryption"), there is a Kconfig warning when selecting CONFIG_TSM
without CONFIG_VIRT_DRIVERS:
WARNING: unmet direct dependencies detected for TSM
Depends on [n]: VIRT_DRIVERS [=n]
Selected by [y]:
- PCI_TSM [=y] && PCI [=y]
CONFIG_TSM is defined in drivers/virt/coco/Kconfig but this Kconfig is
only sourced when CONFIG_VIRT_DRIVERS is enabled. Since this symbol is
hidden with no dependencies, it should be available without a symbol
that just enables a menu.
Move the sourcing of drivers/virt/coco/Kconfig outside of
CONFIG_VIRT_DRIVERS and wrap the other source statements in
drivers/virt/coco/Kconfig with CONFIG_VIRT_DRIVERS to ensure users do
not get any additional prompts while ensuring CONFIG_TSM is always
available to select. This complements commit 110c155e8a68 ("drivers/virt:
Drop VIRT_DRIVERS build dependency"), which addressed the build issue
that this Kconfig warning was pointing out.
Fixes: 3225f52cde56 ("PCI/TSM: Establish Secure Sessions and Link Encryption")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511140712.NubhamPy-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251203-fix-pci-tsm-select-tsm-warning-v1-1-c3959c1cb110@kernel.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)
- Switch vmd from custom domain number allocator to the common
allocator to prevent a potential race with new non-VMD buses (Dan
Williams)
- Enable Precision Time Measurement (PTM) only if device advertises
support for a relevant role, to prevent invalid PTM Requests that
cause ACS violations that are reported as AER Uncorrectable
Non-Fatal errors (Mika Westerberg)
Resource management:
- Prevent resource tree corruption when BAR resize fails (Ilpo
Järvinen)
- Restore BARs to the original size if a BAR resize fails (Ilpo
Järvinen)
- Remove BAR release from BAR resize attempts by the xe, i915, and
amdgpu drivers so the PCI core can restore BARs if the resize fails
(Ilpo Järvinen)
- Move Resizable BAR code to rebar.c (Ilpo Järvinen)
- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
Järvinen)
- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
Järvinen)
Power management and error handling:
- For drivers using PCI legacy suspend, save config state at suspend
so that state (not any earlier state from enumeration, probe, or
error recovery) will be restored when resuming (Lukas Wunner)
- For devices with no driver or a driver that lacks power management,
save config state at hibernate so that state (not any earlier state
from enumeration, probe, or error recovery) will be restored when
resuming (Lukas Wunner)
- Save device config space on device addition, before driver binding,
so error recovery works more reliably (Lukas Wunner)
- Drop pci_save_state() from several drivers that no longer need it
since the PCI core always does it and pci_restore_state() no longer
invalidates the saved state (Lukas Wunner)
- Document use of pci_save_state() by drivers to capture the state
they want restored during error recovery (Lukas Wunner)
Power control:
- Add a struct pci_ops.assert_perst() function pointer to
assert/deassert PCIe PERST# and implement it for the qcom driver
(Krishna Chaitanya Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
switch, which must be held in reset after poweron so the pwrctrl
driver can configure the switch via I2C before bringing up the
links (Krishna Chaitanya Chundru)
Endpoint framework:
- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)
- Add endpoint VNTB MSI doorbell support to reduce latency between
host and endpoint (Frank Li)
New native PCIe controller drivers:
- Add CIX Sky1 host controller DT binding and driver (Hans Zhang)
- Add NXP S32G host controller DT binding and driver (Vincent
Guittot)
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
Beznea)
- Add SpacemiT K1 host controller DT binding and driver (Alex Elder)
Amlogic Meson PCIe controller driver:
- Update DT binding to name DBI region 'dbi', not 'elbi', and update
driver to support both (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Move struct pci_host_bridge allocation from pci_host_common_init()
to callers, which significantly simplifies pcie-apple (Marc
Zyngier)
Broadcom STB PCIe controller driver:
- Disable advertising ASPM L0s support correctly (Jim Quinlan)
- Add a panic/die handler to print diagnostic info in case PCIe
caused an unrecoverable abort (Jim Quinlan)
Cadence PCIe controller driver:
- Add module support for Cadence platform host and endpoint
controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
for new CIX Sky1 driver (Manikandan K Pillai)
MediaTek PCIe controller driver:
- Convert DT binding to YAML schema (Christian Marangi)
- Add Airoha AN7583 DT compatible and driver support (Christian
Marangi)
Qualcomm PCIe controller driver:
- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)
- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
schemas (Krzysztof Kozlowski)
- Look up OPP using both frequency and data rate (not just frequency)
so RPMh votes can account for both (Krishna Chaitanya Chundru)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)
STMicroelectronics STM32MP25 PCIe controller driver:
- Fix a race between link training and endpoint register
initialization (Christian Bruel)
- Align endpoint allocations to match the ATU requirements (Christian
Bruel)
Synopsys DesignWare PCIe controller driver:
- Clear L1 PM Substate Capability 'Supported' bits unless glue driver
says it's supported, which prevents users from enabling non-working
L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)
- Remove now-superfluous L1SS disable code from tegra194 (Bjorn
Helgaas)
- Configure L1SS support in dw-rockchip when DT says
'supports-clkreq' (Shawn Lin)
TI Keystone PCIe controller driver:
- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)
- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)"
* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
PCI: Add Renesas RZ/G3S host controller driver
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
PCI: Validate pci_rebar_size_supported() input
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"The usual trickle of EFI contributions:
- Parse SMBIOS tables in memory directly on Macbooks that do not
implement the EFI SMBIOS protocol
- Obtain EDID information from the primary display while running in
the EFI stub, and expose it via bootparams on x86 (generic method
is in the works, and will likely land during the next cycle)
- Bring CPER handling for ARM systems up to data with the latest EFI
spec changes
- Various cosmetic changes"
* tag 'efi-next-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
docs: efi: add CPER functions to driver-api
efi/cper: align ARM CPER type with UEFI 2.9A/2.10 specs
efi/cper: Add a new helper function to print bitmasks
efi/cper: Adjust infopfx size to accept an extra space
RAS: Report all ARM processor CPER information to userspace
efi/libstub: x86: Store EDID in boot_params
efi/libstub: gop: Add support for reading EDID
efi/libstub: gop: Initialize screen_info in helper function
efi/libstub: gop: Find GOP handle instead of GOP data
efi: Fix trailing whitespace in header file
efi/memattr: Convert efi_memattr_init() return type to void
efi: stmm: fix kernel-doc "bad line" warnings
efi/riscv: Remove the useless failure return message print
efistub/x86: Add fallback for SMBIOS record lookup
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 topic pull request for v6.19:
Features and functionality:
- Add plane color management support (Uma, Chaitanya)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/e7129c6afd6208719d2f5124da86e810505e7a7b@intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix a memory leak (Mika)
- Fix a 64-bit division (Michal Wajdeczko)
- vf migration fix (Matt Brost)
- LRC pause Fix (Tomasz lis)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aTIGiHJnnMtqbDOO@fedora
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- fix VFIO link error for built-in xe module (Arnd Bergmann)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aTIA9in2Bo_fA9TN@fedora
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Cross-subsystem Changes:
- Add device specific vfio_pci driver variant for intel graphics (Michal Winiarski)
Driver Changes:
- Add scope-based cleanup helper for runtime PM (Matt Roper)
- Additional xe driver prerequisites and exports (Michal Winiarski)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aS1bNpqeem6PIHrA@fedora
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- documentation fixes
power-supply drivers:
- add BD71828 charger driver
- add Richtek RT9756 driver
- max77705: add adaptive input current support
- max77705: add support for multiple devices
- misc small fixes
reset drivers:
- add spacemit-p1 poweroff/reboot driver"
* tag 'for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
Revert "power: supply: qcom_battmgr: support disabling charge control"
Documentation: power: rt9756: Document exported sysfs entries
power: supply: rt9756: Add Richtek RT9756 smart cap divider charger
dt-bindings: power: supply: Add Richtek RT9756 smart cap divider charger
driver: reset: spacemit-p1: add driver for poweroff/reboot
power: supply: apm_power: only unset own apm_get_power_status
power: supply: use ktime_divns() to avoid 64-bit division
docs: power: clean up power_supply_class.rst
power: supply: qcom_battmgr: support disabling charge control
power: supply: qcom_battmgr: clamp charge control thresholds
power: supply: wm831x: Check wm831x_set_bits() return value
power: supply: rt9467: Prevent using uninitialized local variable in rt9467_set_value_from_ranges()
power: supply: rt9467: Return error on failure in rt9467_set_value_from_ranges()
power: supply: max17040: Check iio_read_channel_processed() return code
power: supply: cw2015: Check devm_delayed_work_autocancel() return code
power: supply: rt5033_charger: Fix device node reference leaks
power: supply: max77705: Fix potential IRQ chip conflict when probing two devices
power: supply: max77705_charger: implement aicl feature
MAINTAINERS: Add entry for BD71828 charger
power: supply: Add bd718(15/28/78) charger driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- Proper mapping of HID_GD_Z to ABS_DISTANCE for stylus/pen types of
devices (Ping Cheng)
- Power management/hibernation improvements in intel-ish (Zhang Lixu)
- Improved support for several Logitech devices, e.g. G Pro X
Superlight 2, new iteration of Lighspeed receiver, G13, G510 (Nathan
Rossi, Mavroudis Chatzilazaridis, Leo L Schwab, Hans de Goede)
- Support for UcLogic XP-PEN Artist 24 Pro (Joshua Goins)
- WinWing Orion2 throttle support improvement (Ivan Gorinov)
- other assorted small fixes and device ID additions
* tag 'hid-for-linus-2025120201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (37 commits)
drivers: hid: renegotiate resolution multipliers with device after reset
HID: evision: Fix Report Descriptor for Evision Wireless Receiver 320f:226f
HID: logitech-dj: Fix probe failure when used with KVM
HID: logitech-dj: Remove duplicate error logging
HID: logitech-dj: Add support for G Pro X Superlight 2 receiver
selftests/hid-tablet: add ABS_DISTANCE test for stylus/pen
HID: input: map HID_GD_Z to ABS_DISTANCE for stylus/pen
HID: bpf: fix typo in HID usage table
HID: bpf: add the Huion Kamvas 27 Pro
HID: bpf: add heuristics to the Huion Inspiroy 2S eraser button
HID: bpf: Add support for XP-Pen Deco02
HID: bpf: Add support for the XP-Pen Deco 01 V3
HID: bpf: Add support for the Waltop Batteryless Tablet
HID: bpf: Add fixup for Logitech SpaceNavigator variants
HID: bpf: support for Huion Kamvas 16 Gen 3
HID: bpf: add support for Huion Kamvas 13 (Gen 3) (model GS1333)
HID: bpf: Add support for the Inspiroy 2M
Documentation: hid-alps: Format DataByte* subsection headings
Documentation: hid-alps: Fix packet format section headings
HID: nintendo: add WQ_PERCPU to alloc_workqueue users
...
|
|
When interrupting perf stat in repeat mode with a signal the signal is
passed to the child process but the repeat doesn't terminate:
```
$ perf stat -v --null --repeat 10 sleep 1
Control descriptor is not initialized
[ perf stat: executing run #1 ... ]
[ perf stat: executing run #2 ... ]
^Csleep: Interrupt
[ perf stat: executing run #3 ... ]
[ perf stat: executing run #4 ... ]
[ perf stat: executing run #5 ... ]
[ perf stat: executing run #6 ... ]
[ perf stat: executing run #7 ... ]
[ perf stat: executing run #8 ... ]
[ perf stat: executing run #9 ... ]
[ perf stat: executing run #10 ... ]
Performance counter stats for 'sleep 1' (10 runs):
0.9500 +- 0.0512 seconds time elapsed ( +- 5.39% )
0.01user 0.02system 0:09.53elapsed 0%CPU (0avgtext+0avgdata 18940maxresident)k
29944inputs+0outputs (0major+2629minor)pagefaults 0swaps
```
Terminate the repeated run and give a reasonable exit value:
```
$ perf stat -v --null --repeat 10 sleep 1
Control descriptor is not initialized
[ perf stat: executing run #1 ... ]
[ perf stat: executing run #2 ... ]
[ perf stat: executing run #3 ... ]
^Csleep: Interrupt
Performance counter stats for 'sleep 1' (10 runs):
0.680 +- 0.321 seconds time elapsed ( +- 47.16% )
Command exited with non-zero status 130
0.00user 0.01system 0:02.05elapsed 0%CPU (0avgtext+0avgdata 70688maxresident)k
0inputs+0outputs (0major+5002minor)pagefaults 0swaps
```
Note, this also changes the exit value for non-repeat runs when
interrupted by a signal.
Reported-by: Ingo Molnar <mingo@kernel.org>
Closes: https://lore.kernel.org/lkml/aS5wjmbAM9ka3M2g@gmail.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add a test that if an offline CPU is requested perf stat will fail.
$ perf test -vv "perf stat tests"
101: perf stat tests:
--- start ---
test child forked, pid 46965
Basic stat command test
Basic stat command test [Success]
Null stat command test
Null stat command test [Success]
Offline CPU stat command test (cpu 8)
Offline CPU stat command test [Success]
stat record and report test
stat record and report test [Success]
stat record and script test
stat record and script test [Success]
stat repeat weak groups test
stat repeat weak groups test [Success]
Topdown event group test
Topdown event group test [Success]
Topdown weak groups test
Topdown weak groups test [Skipped event parsing failed]
cputype test
cputype test [Success]
hybrid test
hybrid test [Success]
---- end(0) ----
101: perf stat tests : Ok
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Closes: https://lore.kernel.org/linux-perf-users/94313b82-888b-4f42-9fb0-4585f9e90080@linux.ibm.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Additions:
- Add support for Awinic AW99706 backlight driver
Fixes:
- Add GPIOLIB dependency to backlight ktd2801 driver
- Add devlink to LED Backlight's supplier LEDs to enforce correct
removal order and prevent NULL pointer dereferences
- Fix kernel-doc warnings in lp855x.h
Removals:
- Do not include <linux/fb.h> in backlight.h
- Fix unused function warnings from suspend/resume ops in aw99706.c
by switching to DEFINE_SIMPLE_DEV_PM_OPS and using pm_ptr()
Bindings:
- Add Awinic AW99706 backlight binding to MAINTAINERS
- Add Awinic AW99706 backlight binding documentation"
* tag 'backlight-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: aw99706: Fix unused function warnings from suspend/resume ops
backlight: lp855x: Fix lp855x.h kernel-doc warnings
dt-bindings: leds: backlight: Add Awinic AW99706 backlight
backlight: aw99706: Add support for Awinic AW99706 backlight
backlight: led-bl: Add devlink to supplier LEDs
backlight: ktd2801: Depend on GPIOLIB
backlight: Do not include <linux/fb.h> in header file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Updates:
- Add optional GPIO enable pin support to PWM LED driver
Fixes:
- Allow LED module 0 to be added to module bank in lp50xx driver
- Fix upboard LED driver module alias to ensure proper auto-loading
- Update LP5009 to support 3 modules for a total of 9 LEDs
- Skip LEDs without color components in cros_ec driver instead of
failing probe
- Fix GPIO descriptor leaks in netxbig error paths by releasing
acquired GPIOs
- Allow LED_COLOR_ID_MULTI in qcom-lpg driver for greater flexibility
- Enable LP55XX common LED use without FW_LOADER_USER_HELPER
- Ensure lp50xx chip is enabled before any I2C communication
Cleanups:
- Use fwnode_for_each_child_node() instead of
fwnode_for_each_available_child_node() in LED drivers
- Use device_get_next_child_node() instead of
fwnode_get_next_available_child_node() in LED flash drivers
- Replace sprintf() with sysfs_emit() in sysfs show functions for
improved bounds checking
- Replace system_wq() with system_percpu_wq() in the input event
trigger
- Reorder include files to alphabetic order in the PWM LED driver
- Do not enable TRILED in qcom-lpg when configuring PWM
- Drop duplicate LEDS_EXPRESSWIRE config from Kconfig
Removals:
- Remove arcxcnn_bl.txt Device Tree binding documentation
Devicetree bindings:
- Convert ArcticSand arc2c0608 LED driver binding to DT Schema
- Add default-brightness property to common LED binding
- Add enable-gpios property to PWM LED binding
- Add PM7550 to qcom,spmi-flash-led compatible
- Explain standalone PWM usage in qcom-lpg binding"
* tag 'leds-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (21 commits)
leds: rgb: leds-qcom-lpg: Don't enable TRILED when configuring PWM
dt-bindings: leds: qcom-lpg: Explain standalone PWM usage
leds: rgb: leds-qcom-lpg: Allow LED_COLOR_ID_MULTI
leds: pwm: Reorder include files to alphabetic order
leds: pwm: Add optional GPIO enable pin support
dt-bindings: leds: pwm: Add enable-gpios property
leds: trigger: Replace use of system_wq() with system_percpu_wq()
leds: led-class: Replace sprintf() with sysfs_emit() in sysfs show functions
dt-bindings: leds: qcom,spmi-flash-led: Add PM7550
leds: netxbig: Fix GPIO descriptor leak in error paths
leds: leds-lp50xx: Enable chip before any communication
leds: Drop duplicate LEDS_EXPRESSWIRE config
leds: leds-cros_ec: Skip LEDs without color components
leds: leds-lp50xx: LP5009 supports 3 modules for a total of 9 LEDs
leds: upboard: Fix module alias
leds: leds-lp50xx: Allow LED 0 to be added to module bank
leds: lp55xx_common: Enable use without FW_LOADER_USER_HELPER
dt-bindings: leds: Add default-brightness property to common.yaml
leds: flash: Use fwnode_get_next_child_node() instead
leds: Use fwnode_for_each_child_node() instead
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Updates:
- Add Core, Regulator, Onkey and Battery Charger support for the NXP
PF1550 Power Management IC (PMIC)
- Introduce __SMC_KEY macro to fix GCC 15.2.1 errors in macsmc
- Add board definitions for TQMxCU1-HPCM and TQMxCU2-HPCM to the
tqmx86 driver
- Add support for Broadcom BCM2712 SoC to the bcm2835-pm driver
- Hook up the qnap-mcu-eeprom sub-device to qnap-mcu
Fixes:
- Enable compile testing for the Altera SOCFPGA System Manager driver
- Fix device reference leak in altr_sysmgr_regmap_lookup_by_phandle()
- Reserve the unused second I2C address for DA9063 to prevent
userspace interference
- Fix resource leak in da9055_device_init() by calling
regmap_del_irq_chip() in the error path
- Fix potential IRQ chip conflict when probing multiple MAX77620
devices by using devm_kmemdup for regmap_irq_chip
- Return -EPROBE_DEFER when a syscon devuice is not found to allow
deferred probing
- Update email address for the PF1550 PMIC driver in MAINTAINERS
- Correct file entry for PF1550 MFD driver in MAINTAINERS from
pfd1550.h to pf1550.h
- Calculate checksum on the actual number of received bytes in
qnap-mcu for error messages
- Use -EPROTO instead of -EIO for checksum errors in qnap-mcu
- Add proper error handling for command errors (e.g., "@8", "@9") in
qnap-mcu
- Fix missing irq_domain_remove() in error path of
mt63{58,97}_irq_init()
Cleanups:
- Mark SMC write buffer arguments as const in apple_smc_write(),
apple_smc_rw(), and apple_smc_write_atomic()
- Simplify the error handling path in da9055_device_init() by
removing a redundant mfd_remove_devices() call
- Use regmap_reg_range() and a real one-element array for
pmic_status_range in rohm-bd718x7 for cleaner initialization
- Remove select I2C_K1 from MFD_SPACEMIT_P1 to avoid build failures
when I2C_K1's dependencies are disabled
- Remove unneeded semicolon from ls2k_bmc_recover_pci_data()
- Drop OF dependency for MFD_MAX5970 in Kconfig to allow wider
compile testing and non-OF systems
- Make OF ID table style consistent in simple-mfd-i2c driver
- Update header inclusions in simple-mfd-i2c to follow IWYU (Include
What You Use) principle
- Move checksum verification logic to a separate function in qnap-mcu
- Use chained IRQs for S2MPG10 in the Samsung SEC driver to simplify
interrupt handling
- Drop a stray semicolon from sec-irq.c
Removals:
- Remove the unused TI WL1273 FM radio core driver
- Remove the unused wl1273-core.h header and tidy up its reference in
documentation
Device tree bindings:
- Add Device Tree binding for the NXP PF1550 PMIC
- Add missing GPIO pins and supply properties to the Silergy SY7636A
PMIC binding
- Add interrupt-controller property to the Maxim MAX77705 binding for
sub-device interrupt source determination
- Add Device Tree binding for the Renesas R2A11302FT PMIC
- Allow the wakeup-source property in the Dialog DA9063 binding
- Make interrupt-related properties optional in the TI TPS65910 PMIC
binding
- Document the Qualcomm PMIV0104 PMIC compatible string
- Document the Qualcomm PM7550 PMIC compatible string
- Enable power button subnode for TWL603x in the TI TWL binding
- Convert the Dialog DA9052/53 I2C binding from .txt to .yaml format,
including compatible string fallback and interrupt properties
- Document control-scb and sysreg-scb syscons on pic64gx with
fallback compatibles
- Document sama7g5-sfrbu and sama7d65-sfrbu syscons with fallback to
atmel,sama5d2-sfrbu
- Fix LEDs node schema in fsl,mc13xxx binding by adding led@ child
nodes and missing properties
- Add mt7981-topmisc compatible string to the syscon binding"
* tag 'mfd-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (42 commits)
mfd: sec: Drop a stray semicolon
mfd: qnap-mcu: Hook up the EEPROM sub-device
dt-bindings: mfd: syscon: Add mt7981-topmisc
dt-bindings: mfd: fsl,mc13xxx: Fix LEDs node schema
mfd: mt6358-irq: Fix missing irq_domain_remove() in error path
mfd: mt6397-irq: Fix missing irq_domain_remove() in error path
dt-bindings: mfd: Document syscons falling back to atmel,sama5d2-sfrbu
dt-bindings: mfd: Document control-scb and sysreg-scb on pic64gx
dt-bindings: mfd: Convert dlg,da9052-i2c.txt to yaml format
mfd: sec: Use chained IRQs for s2mpg10
mfd: qnap-mcu: Add proper error handling for command errors
mfd: qnap-mcu: Move checksum verification to its own function
mfd: qnap-mcu: Use EPROTO in stead of EIO on checksum errors
mfd: qnap-mcu: Calculate the checksum on the actual number of bytes received
mfd: simple-mfd-i2c: Don't use "proxy" headers
mfd: simple-mfd-i2c: Make ID table style consistent
mfd: Kconfig: Drop OF dependency on MFD_MAX5970
mfd: ls2kbmc: Remove unneeded semicolon from ls2k_bmc_recover_pci_data()
dt-bindings: mfd: twl: Enable power button also for TWL603X
MAINTAINERS: Adjust file entry in NXP PF1550 PMIC MFD DRIVER
...
|
|
The struct io_uring_buf elements in a buffer ring are in a memory region
accessible from userspace. A malicious/buggy userspace program could
therefore write to them at any time, so they should be accessed with
READ_ONCE() in the kernel. Commit 98b6fa62c84f ("io_uring/kbuf: always
use READ_ONCE() to read ring provided buffer lengths") already switched
the reads of the len field to READ_ONCE(). Do the same for bid and addr.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: c7fb19428d67 ("io_uring: add support for ring mapped supplied buffers")
Cc: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With authentication, in addition to EKEYREJECTED there is also no point in
retrying reconnects when status is ENOKEY. Thus, add -ENOKEY as another
criteria to determine when to stop retries.
Cc: Daniel Wagner <wagi@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Closes: https://lore.kernel.org/linux-nvme/20250829-nvme-fc-sync-v3-0-d69c87e63aee@kernel.org/
Signed-off-by: Justin Tee <justintee8345@gmail.com>
Tested-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Memory allocated by kvcalloc() may come from vmalloc or kmalloc,
so use kvfree() instead of kfree() for proper deallocation.
Fixes: aa36d711e945 ("nvme-auth: convert dhchap_auth_list to an array")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Replace kcalloc with kvcalloc for allocation of the commands
array. Each command structure is 712 bytes. The array typically
exceeds a single page, and grows much larger with high queue depths
(e.g., commands >182KB).
kvcalloc automatically falls back to vmalloc for large or fragmented
allocations, improving reliability. In our case, this memory is not
aimed for DMA operations and could be safely allocated by kvcalloc.
Using virtually contiguous memory helps to avoid allocation failures
and out-of-memory conditions common with kcalloc on large pools.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Replace kcalloc with kvcalloc for allocation of the commands and
responses arrays. Each command structure is 272 bytes and each
response structure is 672 bytes. These arrays typically exceed a
single page, and grow much larger with high queue depths
(e.g., commands >2MB, responses >170KB)
kvcalloc automatically falls back to vmalloc for large or fragmented
allocations, improving reliability. In our case, this memory is not
aimed for DMA operations and could be safely allocated by kvcalloc.
Using virtually contiguous memory helps to avoid allocation failures
and out-of-memory conditions common with kcalloc on large pools.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Fix two spelling mistakes.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When cloning with node replacements (IORING_REGISTER_DST_REPLACE),
destination entries after the cloned range are not copied over.
Add logic to copy them over to the new destination table.
Fixes: c1329532d5aa ("io_uring/rsrc: allow cloning with node replacements")
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Many of the nvmet-fc log messages cannot print the device used, because
it's not there yet:
(NULL device *): {0:0} Association deleted
Use the pr_* macros consistently throughout the module and match the
output of the nvme-fc module.
Using port:association ids are more useful when debugging what's going
on, because these match now with the log entries from nvme-fc.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The variable holds nodes from the destination ring's existing buffer
table. In io_clone_buffers(), the term "src" is used to refer to the
source ring.
Rename to node for clarity.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Get rid of some redundant checks and move the src arg validation to
before the buffer table allocation, which simplifies error handling.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Nothing is using lsdir member in struct fcloop_lsreq.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When the remoteport or the targetport are removed check that there are
no inflight requests or responses.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When the rport is removed there shouldn't be any in flight request or
responses.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Move the fatal signal check before bio_alloc() to prevent a memory
leak when BLKDEV_ZERO_KILLABLE is set and a fatal signal is pending.
Previously, the bio was allocated before checking for a fatal signal.
If a signal was pending, the code would break out of the loop without
freeing or chaining the just-allocated bio, causing a memory leak.
This matches the pattern already used in __blkdev_issue_write_zeroes()
where the signal check precedes the allocation.
Fixes: bf86bcdb4012 ("blk-lib: check for kill signal in ioctl BLKZEROOUT")
Reported-by: syzbot+527a7e48a3d3d315d862@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=527a7e48a3d3d315d862
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: syzbot+527a7e48a3d3d315d862@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
REQ_OP_ZONE_RESET_ALL is a zone management request, and op_is_zone_mgmt()
has returned true for it.
Update the comment to remove the misleading exception note so
the documentation matches the implementation.
Fixes: 12a1c9353c47 ("block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL")
Signed-off-by: shechenglong <shechenglong@xfusion.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit fe0418eb9bd6 ("block: Prevent potential deadlocks in zone write
plug error recovery") added a WARN check in disk_put_zone_wplug() to
verify that when the last reference to a zone write plug is dropped,
this zone write plug does not have the BLK_ZONE_WPLUG_PLUGGED flag set,
that is, that it is not plugged.
However, the function disk_zone_wplug_abort(), which is called for zone
reset and zone finish operations, does not clear this flag after
emptying a zone write plug BIO list. This can result in the
disk_put_zone_wplug() warning to trigger if the user (erroneously as
that is bad pratcice) issues zone reset or zone finish operations while
the target zone still has plugged BIOs.
Modify disk_put_zone_wplug() to clear the BLK_ZONE_WPLUG_PLUGGED flag.
And while at it, also add a lockdep annotation to ensure that this
function is called with the zone write plug spinlock held.
Fixes: fe0418eb9bd6 ("block: Prevent potential deadlocks in zone write plug error recovery")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
An incorrect backmerge resolution resulted in an
incorrect duplicate put. Fix.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/dri-devel/CAHk-=whaiMayMx=LrL7P119MLBX6exM_mEu4S2uBRT+xWQ-mbA@mail.gmail.com/
Fixes: Fixes: ce0478b02ed2 ("Merge tag 'v6.18-rc6' into drm-next")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Allow more host caps to be modified through debugfs
- Skip to set the default 200mA SD current limit
MMC host:
- Convert a few more DT bindings to the DT schema
- dw_mmc: Add Shawn Lin as co-maintainer for the dw_mmc drivers
- dw_mmc-rockchip:
- Add memory clock auto-gating support
- Add support for the RK3506 variant
- meson-mx-sdio:
- Ignore disabled "mmc-slot" child-nodes
- Refactoring and general code improvements
- renesas_sdhi:
- Enable bigger data ports where available
- Manage reset in probe and during system-wide suspend/resume
- sdhci-brcmstb:
- Add support for the BCM72116 and BCM74371 variants
- Save/restore registers during system-wide suspend/resume
- sdhci-msm:
- Add support for the sm8750 and the Kaanapali variants
- Avoid early clock doubling during HS400 transition
- sdhci-of-dwcmshc:
- Add command queue support for Rockchip SOCs
- Add support for the Eswin EIC7700 variant"
* tag 'mmc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (40 commits)
mmc: sdhci-of-dwcmshc: reduce CIT for better performance
mmc: sdhci-of-dwcmshc: Disable internal clock auto gate for Rockchip SOCs
mmc: sdhci-msm: Avoid early clock doubling during HS400 transition
MAINTAINERS: Add Shawn Lin as co-maintainer for dw_mmc drivers
mmc: sdhci-of-dwcmshc: Fix command queue support for RK3576
mmc: renesas_sdhi: Add suspend/resume hooks
mmc: renesas_sdhi: Switch to SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() and pm_ptr()
mmc: renesas_sdhi: Deassert the reset signal on probe
dt-bindings: mmc: am654: Simplify dma-coherent property
mmc: meson-mx-sdio: Ignore disabled "mmc-slot" child-nodes
mmc: meson-mx-sdio: Fix indentation in meson_mx_mmc_irq_thread()
mmc: meson-mx-sdio: Use dev_err_probe() where appropriate
mmc: meson-mx-sdio: Use devm_mmc_alloc_host() helper
mmc: meson-mx-sdio: Refactor internal clock initialization
mmc: meson-mx-sdio: Use devm_clk_get_enabled()
mmc: meson-mx-sdio: Switch to regmap for register access
mmc: core: add WQ_PERCPU to alloc_workqueue users
mmc: dw_mmc-rockchip: Add memory clock auto-gating support
mmc: omap: add WQ_PERCPU to alloc_workqueue users
mmc: mtk-sd: replace use of system_wq with system_percpu_wq
...
|
|
Backmerging to be able do to a clean PR.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Allow power-off for out-of-band wakeup-capable devices
- Drop the redundant call to dev_pm_domain_detach() for the amba bus
- Extend the genpd governor for CPUs to account for IPIs
pmdomain providers:
- bcm: Add support for BCM2712
- mediatek: Add support for MFlexGraphics power domains
- mediatek: Add support for MT8196 power domains
- qcom: Add RPMh power domain support for Kaanapali
- rockchip: Add support for RV1126B
pmdomain consumers:
- usb: dwc3: Enable out of band wakeup for i.MX95
- usb: chipidea: Enable out of band wakeup for i.MX95"
* tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (26 commits)
pmdomain: Extend the genpd governor for CPUs to account for IPIs
smp: Introduce a helper function to check for pending IPIs
pmdomain: mediatek: convert from clk round_rate() to determine_rate()
amba: bus: Drop dev_pm_domain_detach() call
pmdomain: bcm: bcm2835-power: Prepare to support BCM2712
pmdomain: mediatek: mtk-mfg: select MAILBOX in Kconfig
pmdomain: mediatek: Add support for MFlexGraphics
pmdomain: mediatek: Fix build-errors
cpuidle: psci: Replace deprecated strcpy in psci_idle_init_cpu
pmdomain: rockchip: Add support for RV1126B
pmdomain: mediatek: Add support for MT8196 HFRPSYS power domains
pmdomain: mediatek: Add support for MT8196 SCPSYS power domains
pmdomain: mediatek: Add support for secure HWCCF infra power on
pmdomain: mediatek: Add support for Hardware Voter power domains
pmdomain: qcom: rpmhpd: Add RPMh power domain support for Kaanapali
usb: dwc3: imx8mp: Set out of band wakeup for i.MX95
usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95
usb: chipidea: core: detach power domain for ci_hdrc platform device
pmdomain: core: Allow power-off for out-of-band wakeup-capable devices
PM: wakeup: Add out-of-band system wakeup support for devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, lots of various updates to existing ones, some
refactoring support for new models and misc tweaks and fixes.
The biggest new feature in GPIO core is adding support for managed,
enable-counted sharing of GPIO pins, something that - until now - was
only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag
which basically allowed drivers to "fight it out" for the descriptor
and provided no synchronization. It was enabled on Qualcomm platforms
(and thus is enabled on arm64 defconfig) and I plan on removing
GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to
the new mechanism.
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot
enable counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone
to bugs (GPIO controllers don't have to use the software node's
name as their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device
code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide
array of drivers in order to avoid having to use the __maybe_unused
attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to
user-space in gpio-virtuser (this was previously not possible as
this function returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary
calls to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for
gpio-pca953x, which is a great addition as it's probably the most
commonly used GPIO expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson"
* tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits)
gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE
gpio: regmap: fix kernel-doc notation
gpio: shared: fix a deadlock
gpio: shared-proxy: set suppress_bind_attrs
gpio: shared: ignore GPIO hogs when traversing the device tree
gpio: shared: ignore special __symbols__ node when traversing device tree
gpio: shared: handle the reset-gpios corner case
gpio: zynq: Use modern PM macros
gpio: xilinx: Use modern PM macros
gpio: xgene: Use modern PM macros
gpio: uniphier: Use modern PM macros
gpio: tqmx86: Use modern PM macros
gpio: pch: Use modern PM macros
gpio: omap: Use modern PM macros
gpio: msc313: Use modern PM macros
gpio: mlxbf2: Use modern PM macros
gpio: ml-ioh: Use modern PM macros
gpio: pl061: Use modern PM macros
gpio: htc-egpio: Use modern PM macros
gpio: brcmstb: Use modern PM macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This includes two changes for core functions, which affects all use
cases of this subsystem:
- Handle per-device interoperability quirks
Some devices have quirks affecting interoperability. To identify
such quirks at an early stages of device detection, the step for
reading the configuration ROM contents has been changed. As a side
effect, the entire detection process is now performed at the basic
transaction speed (S100), without a trial to probe higher
supported speeds.
With this change, the following devices should now work with fewer
issues:
- TASCAM FW-1884, FW-1804, and FW-1082
- MOTU Audio Express
- Safer removals of host card
There was a race condition between host card removal and handling
of bus reset events in the workqueue. This appears to be a long
standing issue, and recent changes to use more workqueues escalate
it.
To solve it, a new callback has been added to the 1394 OHCI PCI
driver to unregister the interrupt sources and wait for workqueue
completions when removing a card instance"
* tag 'firewire-updates-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: abort pending transactions at card removal
firewire: core: add WQ_UNBOUND to alloc_workqueue users
firewire: core: clear sources of hardware interrupt at card removal
firewire: core: code refactoring to find and pop transaction entry
firewire: core: code refactoring to remove transaction entry
firewire: core: use cleanup function to release cached configuration ROM
ALSA: firewire-tascam: reserve resources for transferred isochronous packets at S400
firewire: core: handle device quirk of TASCAM FW-1884/FW-1804/FW-1082
firewire: core: determine transaction speed after detecting quirks
firewire: core: code refactoring to compute transaction speed
firewire: core: handle device quirk of MOTU Audio Express
firewire: core: detect device quirk when reading configuration ROM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Apple Silicon SMC
- TSC1641 I2C power monitor
- MPS MP9945
- MAX17616
- MP2925 and MP2929
Added support for new devices to existing drivers:
- dell-smm: Add Dell G5 5505 to fan control whitelist
- aspeed-g6-pwm-tach: Support for AST2700
- asus-ec-sensors: Support for ROG STRIX X470-I GAMING, ROG STRIX
X870-F GAMING WIFI, ROG STRIX X870E-H GAMING WIFI7, and Pro WS
TRX50-SAGE WIFI
- k10temp: Support for AMD Steam Deck APU ID
- pmbus/isl68137: Support for raa229141
- aht10: Support for dht20
- adt7410: Support for ADT7422
- peci: Support for Intel Emerald Rapids
- nct6775: Support for ASUS ROG STRIX X870E-H GAMING WIFI7
- pmbus/max34440: Support for ADPM12200
- ntc-thermistor: Support for Murata ncp18wm474
Infrastructure updates:
- Utilize subsystem locking in various drivers
- ltc4282, ltc2947: Use the new energy64 attribute
Bug fixes:
- Various drivers: Fixes to avoid TOCTOU, mostly in macro functions
evaluating parameters multiple times, as well as missing locks
- max6697: Fix regmap leak on probe failure
- sy7636a: Fix regulator_enable resource leak on error path
- asus-ec-sensors: Correct Pro WS TRX50-SAGE WIFI entry
Other changes and improvements:
- w83781d, lm78: Drop REALLY_SLOW_IO
- Fix broken datasheet links in various drivers
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (110 commits)
hwmon: (dell-smm) Add Dell G5 5505 to fan control whitelist
hwmon: (max16065) Use local variable to avoid TOCTOU
hwmon: (w83l786ng) Convert macros to functions to avoid TOCTOU
hwmon: (max6697) fix regmap leak on probe failure
hwmon/w83781d: Drop REALLY_SLOW_IO setting
hwmon/lm78: Drop REALLY_SLOW_IO setting
hwmon: sy7636a: Fix regulator_enable resource leak on error path
hwmon: (adm1026) Convert macros to functions to avoid TOCTOU
hwmon: (adm1029) Add locking to avoid TOCTOU
hwmon: (lm87) Convert macros to functions to avoid TOCTOU
hwmon: (asus-ec-sensors) correct Pro WS TRX50-SAGE WIFI entry
hwmon: (vt8231) Convert macros to functions to avoid TOCTOU
hwmon: (emc2103) Add locking to avoid TOCTOU
hwmon: (aspeed-g6-pwm-tach): Add AST2700 compatible string
dt-bindings: hwmon: Add AST2700 compatible
hwmon: (asus-ec-sensors) add ROG STRIX X470-I GAMING
hwmon: (vt1211) Convert macros to functions to avoid TOCTOU
hwmon: (k10temp) Add AMD Steam Deck APU ID
hwmon: Add Apple Silicon SMC hwmon driver
Documentation/hwmon: Fix broken datasheet links for zl6100
...
|
|
The two newly added drivers fail to link on builds without
CONFIG_OF:
x86_64-linux-ld: drivers/pinctrl/pinctrl-pic64gx-gpio2.o: in function `pinconf_generic_dt_node_to_map_all':
pinctrl-pic64gx-gpio2.c:(.text+0xc9): undefined reference to `pinconf_generic_dt_node_to_map'
x86_64-linux-ld: drivers/pinctrl/pinctrl-mpfs-iomux0.o: in function `pinconf_generic_dt_node_to_map_all':
pinctrl-mpfs-iomux0.c:(.text+0xc9): undefined reference to `pinconf_generic_dt_node_to_map'
Add a Kconfig dependencies.
Fixes: 38cf9d641314 ("pinctrl: add pic64gx "gpio2" pinmux driver")
Fixes: 46397274da22 ("pinctrl: add polarfire soc iomux0 pinmux driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
This function doesn't return anything any more, so the compiler would
notice any bad error handling before any cocci script would.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251202193129.1411419-3-briannorris@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
No callers check the return code, and that's a good thing. Doing so
would be racy and unhelpful.
Drop the return code entirely, so we don't make anyone think about its
complexities.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251202193129.1411419-2-briannorris@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Apparently this test is the only code that checks the return code from
pm_runtime_barrier(), and it turns out that's for good reason -- it's
inherently racy, and a bad idea. We're going to make
pm_runtime_barrier() return void, so prepare for that by dropping any
return code checks.
This resolves some test failures seen like the following:
[ 34.559694] # pm_runtime_error_test: EXPECTATION FAILED at drivers/base/power/runtime-test.c:177
[ 34.559694] Expected 1 == pm_runtime_barrier(dev), but
[ 34.559694] pm_runtime_barrier(dev) == 0 (0x0)
[ 34.563604] # pm_runtime_error_test: pass:0 fail:1 skip:0 total:1
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/93259f2b-7017-4096-a31b-cabbf6152e9b@roeck-us.net/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251202193129.1411419-1-briannorris@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss
Pull GNSS updates from Johan Hovold:
- add support for claiming and deasserting the safeboot pin found on
recent u-blox receivers
- fix timepulse pin description in the devicetree binding
... and some related binding updates
* tag 'gnss-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss:
dt-bindings: gnss: fix timepulse description
dt-bindings: gnss: u-blox: use lowercase company name
dt-bindings: gnss: u-blox: use open-drain reset and safeboot in example
gnss: ubx: add support for the safeboot gpio
dt-bindings: gnss: u-blox: add safeboot gpio
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release is almost entirely new drivers, with a couple of small
changes in generic code.
The biggest individual update is a rename of the existing Microchip
driver and the addition of a new driver for the silicon SPI controller
in their PolarFire SoCs. The overlap between the soft IP supported by
the current driver and this new one is regrettably all in the IP and
not in the register interface offered to software.
- Add a time offset parameter for offloads, allowing them to be
defined in relation to each other. This is useful for IIO type
applcations where you trigger an operation then read the result
after a delay.
- Add a tracepoint for flash exec_ops, bringing the flash support
more in line with the debuggability of vanilla SPI.
- Support for Airoha EN7523, Arduino MCUs, Aspeed AST2700, Microchip
PolarFire SPI controllers, NXP i.MX51 ECSPI target mode, Qualcomm
IPQ5414 and IPQ5332, Renesas RZ/T2H, RZ/V2N and RZ/2NH and SpacemiT
K1 QuadSPI.
There's also a small set of ASoC cleanups that I mistakenly applied to
the SPI tree and then put more stuff on top of before it was brought
to my attention, sorry about that"
* tag 'spi-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (80 commits)
spi: microchip-core: Refactor FIFO read and write handlers
spi: ch341: fix out-of-bounds memory access in ch341_transfer_one
spi: microchip-core: Remove unneeded PM related macro
spi: microchip-core: Use SPI_MODE_X_MASK
spi: microchip-core: Utilise temporary variable for struct device
spi: microchip-core: Replace dead code (-ENOMEM error message)
spi: microchip-core: use min() instead of min_t()
spi: dt-bindings: airoha: add compatible for EN7523
spi: airoha-snfi: en7523: workaround flash damaging if UART_TXD was short to GND
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: microchip: Enable compile-testing for FPGA SPI controllers
spi: Fix potential uninitialized variable in probe()
spi: rzv2h-rspi: add support for RZ/T2H and RZ/N2H
spi: dt-bindings: renesas,rzv2h-rspi: document RZ/T2H and RZ/N2H
spi: rzv2h-rspi: add support for loopback mode
spi: rzv2h-rspi: add support for variable transfer clock
spi: rzv2h-rspi: add support for using PCLK for transfer clock
spi: rzv2h-rspi: make transfer clock rate finding chip-specific
spi: rzv2h-rspi: avoid recomputing transfer frequency
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a relatively busy release for the regulator API, as well as a
good collection of new drivers we've got a little bit of core work and
a bunch of cleanup throughout the subsystem:
- Support for propagating undervoltage events to child regulators
- Undo enables done on supplies when setting enabling regulators via
constraints fails
- Pull in some gpiolib changes adding support for shared GPIOs to the
gpiolib core, using them to replace the open coded variant of this
that we've had in the regulator API for a long time
- Support for Fitipower FP9931 and JD9330, Mediatek MT6316, MT6363
and MT6373, NXP PF1550 and Qualcomm PMH01XX and PMCX0102
The PF1550 support was originally going to go via the MFD tree but
Krzysztof's cleanup work overlapped with it so I pulled in Lee's
signed tag with support for the device"
* tag 'regulator-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (50 commits)
regulator: fp9931: Fix spelling mistake "failid" -> "failed"
regulator: core: Protect regulator_supply_alias_list with regulator_list_mutex
regulator: pf9453: Constify pointers to 'regulator_desc' wrap struct
regulator: pca9450: Constify pointers to 'regulator_desc' wrap struct
regulator: mt6358: Constify pointers to 'regulator_desc' wrap struct
regulator: bd96801: Constify pointers to 'regulator_desc' wrap struct
regulator: bd718x7: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71828: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71815: Constify pointers to 'regulator_desc' wrap struct
regulator: Use container_of_const() when all types are const
regulator: pca9450: Fix error code in probe()
regulator: qcomm-labibb: replace use of system_wq with system_dfl_wq
regulator: Add FP9931/JD9930 driver
dt-bindings: regulator: Add Fitipower FP9931/JD9930
dt-bindings: vendor-prefixes: Add Fitipower
regulator: make the subsystem aware of shared GPIOs
regulator: renesas-usb-vbus-regulator: Remove unused headers
regulator: pca9450: Add support for setting debounce settings
regulator: dt-bindings: pca9540: add debounce timer configuration
regulator: core: disable supply if enabling main regulator fails
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Another small update for regmap, we have one new feature plus a little
bit of cleanup:
- Support for sparseness information in the flat cache, allowing
users that really need the performance properties it provides to
benefit from the interface and startup time improvements that
sparsness provides without needing to go all the way to a more
fancy data structure
- Cleanup work from Andy Shevchenko, refactoring the cache interface
in preparation for some future stuff he's working on"
* tag 'regmap-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Reorder regmap_mbq_context struct for better packing
regmap: i3c: Use ARRAY_SIZE()
regcache: maple: Split ->populate() from ->init()
regcache: flat: Split ->populate() from ->init()
regcache: flat: Remove unneeded check and error message for -ENOMEM
regcache: rbtree: Split ->populate() from ->init()
regcache: Add ->populate() callback to separate from ->init()
regmap: warn users about uninitialized flat cache
regmap: add flat cache with sparse validity
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"Core MTD changes:
- We must ignore error -ENOENT from parsers on subpartitions which is
a legitimate return value
- PM support is added to the intel-dg driver
Raw NAND changes:
- The major change in this is the support for the Allwinner H616 NAND
controller, which lead to numerous changes and cleanups in the
driver.
- Another notable change in this driver is the use of field_get() and
field_prep(), but since the global support for this helpers is
going to be merged in the same release as we start using these
helpers, we undefine them in the first place to avoid warnings.
- Marvell drivers layout handling changes have also landed, they fix
previous definitions and abuses that have been made previously,
which implied to relax the ECC parameters validation in the core a
bit.
- The Cadence NAND controller driver gets NV-DDR interface support.
SPI NAND changes:
- Support for FudanMicro FM25S01BI3 and ESMT F50L1G41LC is added.
SPI NOR changes:
- Fix SMPT parsing for S25FS-S flash family. They report variable
dummy cycles for reads. This results in the default of 0 being
used. This works for other Infineon chips, but not for the S25FS-S
family. They need 8 dummy cycles. Add fixup hooks to specify that.
Also add fixup hooks to fix incorrect map ID data in SFDP.
- Add support for a bunch of Winbond flashes. Their block protection
information is not discoverable, so they need to have an entry in
the flash tables to describe that.
- Some cleanups for Micron flash support.
- Add support for Micron mt35xu01gbba.
- Some SPI controllers like the Intel one on the PCI bus do not
support the read CR opcode (0x35). Do not use the opcode if the
controller does not support it.
Aside from these main changes, there is the usual load of API updates,
kdoc fixes, potential memory leaks fixes, etc"
* tag 'mtd/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (51 commits)
mtd: sm_ftl: Fix typo in comment in sm_read_lba
mtd: sm_ftl: Replace deprecated strncpy with sysfs_emit in sm_attr_show
mtd: lpddr_cmds: fix signed shifts in lpddr_cmds
mtd: docg3: fix kernel-doc warnings
mtd: spinand: add support for FudanMicro FM25S01BI3
mtd: rawnand: renesas: Handle devm_pm_runtime_enable() errors
mtd: nand: realtek-ecc: Fix Kconfig dependencies
mtd: rawnand: sunxi: #undef field_{get,prep}() before local definition
mailmap: update Pratyush Yadav's email address
mtd: spi-nor: core: Check read CR support
mtd: spi-nor: micron-st: add TODO for fixing mt35xu02gcba
mtd: spi-nor: micron-st: add mt35xu01gbba support
mtd: spi-nor: micron-st: use SFDP of mt35xu512aba
mtd: spi-nor: micron-st: move set_octal_dtr to late_init()
mtd: spi-nor: micron-st: rename the die_late_init functions
mtd: spinand: esmt: add support for F50L1G41LC
mtd: rawnand: lpc32xx_slc: Convert to use devm_gpiod_get_optional()
mtd: mtdpart: ignore error -ENOENT from parsers on subpartitions
mtd: maps: pcmciamtd: fix potential memory leak in pcmciamtd_detach()
mtd: spi-nor: spansion: SMPT fixups for S25FS-S
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"In addition to the usual mix of core cleanups, driver changes, minor
fixes and device tree updates the highlight this cycle is Rust support
for the core and a first Rust driver both provided by Michal
Wilczynski.
Michal wrote about these changes on
https://mwilczynski.dev/posts/bringing-rust-to-the-pwm-subsystem/
which is a nice read"
* tag 'pwm/for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (22 commits)
pwm: rzg2l-gpt: Allow checking period_tick cache value only if sibling channel is enabled
pwm: bcm2835: Make sure the channel is enabled after pwm_request()
pwm: mediatek: Make use of struct_size macro
pwm: mediatek: Remove unneeded semicolon
pwm: airoha: Add support for EN7581 SoC
pwm: mediatek: Convert to waveform API
pwm: max7360: Clean MAX7360 code
pwm: Drop unused function pwm_apply_args()
pwm: Use %u to printf unsigned int pwm_chip::npwm and pwm_chip::id
pwm: Simplify printf to emit chip->npwm in $debugfs/pwm
pwm: th1520: Use module_pwm_platform_driver! macro
pwm: th1520: Fix clippy warning for redundant struct field init
pwm: Fix Rust formatting
dt-bindings: pwm: thead: Add T-HEAD TH1520 PWM controller
pwm: Add Rust driver for T-HEAD TH1520 SoC
rust: pwm: Fix broken intra-doc link
rust: pwm: Drop wrapping of PWM polarity and state
rust: pwm: Add module_pwm_platform_driver! macro
rust: pwm: Add complete abstraction layer
rust: pwm: Add Kconfig and basic data structures
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Improvements:
- Support legacy probe behavior in cros_ec_lightbar and
cros_ec_sensorhub
Fixes:
- Don't fall back to legacy probe behavior if it isn't a legacy
device in cros_usbpd_notify
- Fix an UAF after unbinding driver in cros_ec_ishtp"
* tag 'chrome-platform-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: sensorhub: Support devices without FIFO_INT_ENABLE
platform/chrome: cros_ec_ishtp: Fix UAF after unbinding driver
platform/chrome: cros_ec_lightbar: Check if ec supports suspend commands
platform/chrome: cros_usbpd_notify: defer probe when parent EC driver isn't ready
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
|
|
Expose color pipeline and add ability to program it.
v2: Set bit to enable multisegmented lut
v3: s/drm_color_lut_32/drm_color_lut32 (Simon)
v4: - Fix dsb programming
- Remove multi-segment LUT, they will be added in later patches
- Add pipeline only to TGL+
- Code Refactor
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-16-uma.shankar@intel.com
|
|
Add helpers to program the 3D LUT registers and arm them.
LUT_3D_READY in LUT_3D_CLT is cleared off by the HW once
the LUT buffer is loaded into it's internal working RAM.
So by the time we try to load/commit new values, we expect
it to be cleared off. If not, log an error and return
without writing new values. Do it only when writing with MMIO.
There is no way to read register within DSB execution.
v2:
- Add information regarding LUT_3D_READY to commit message (Jani)
- Log error instead of a drm_warn and return without committing changes
if 3DLUT HW is not ready to accept new values.
- Refactor intel_color_crtc_has_3dlut()
Also remove Gen10 check (Suraj)
v3:
- Addressed review comments (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-15-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add registers needed to program 3D LUT
v2:
- Follow convention documented in i915_reg.h (Jani)
- Removing space in trailer (Suraj)
- Move registers to intel_color_regs.h
BSpec: 69378, 69379, 69380
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-14-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Extract the LUT and program plane post csc registers.
v2: Add DSB support
v3: Add support for single segment 1D LUT
v4:
- s/drm_color_lut_32/drm_color_lut32 (Simon)
- Move declaration to beginning of the function (Suraj)
- Remove multisegmented code, add it later
- Remove dead code for SDR planes, add it later
v5:
- Fix iterator issues
v6: Removed redundant variable (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-13-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add callback to program Pre-CSC LUT for TGL and beyond
v2: Add DSB support
v3: Add support for single segment 1D LUT color op
v4:
- s/drm_color_lut_32/drm_color_lut32/ (Simon)
- Change commit message (Suraj)
- Improve comments (Suraj)
- Remove multisegmented programming, to be added later
- Remove dead code for SDR planes, add when needed
BSpec: 50411, 50412, 50413, 50414
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-12-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add framework that will help in loading LUT to Pre/Post CSC color
blocks.
v2: Add dsb support
v3: Align enum names
v4: Propagate change in lut data to crtc_state
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-11-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add macros to define Plane Post CSC registers
v2:
- Add Plane Post CSC Gamma Multi Segment Enable bit
- Add BSpec entries (Suraj)
v3:
- Fix checkpatch issues (Suraj)
BSpec: 50403, 50404, 50405, 50406, 50409, 50410,
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-10-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add macros to define Plane Degamma registers
v2:
- Add BSpec links (Suraj)
v3:
- Add Bspec links in trailer (Suraj)
- Fix checkpatch issues (Suraj)
BSpec: 50411, 50412, 50413, 50414
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-9-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add callback for setting CTM block in platforms D12 and beyond
v2:
- Add dsb support
- Pass plane_state as we are now doing a uapi to hw state copy
- Add support for 3x4 matrix
v3:
- Add relevant header file
- Fix typo (Suraj)
- Add callback to TGL+ (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-8-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When int_bits == 0, we lose the sign bit when we do the range check
and apply the mask.
Fix this by ensuring a minimum of one integer bit, which guarantees space
for the sign bit in fully fractional representations (e.g. S0.12)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-7-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add framework to program CSC. It enables copying of matrix from UAPI
to intel plane state. Also add helper functions which will eventually
program values to hardware.
Add a crtc state variable to track plane color change.
v2:
- Add crtc_state->plane_color_changed
- Improve comments (Suraj)
- s/intel_plane_*_color/intel_plane_color_* (Suraj)
v3:
- align parameters with open braces (Suraj)
- Improve commit message (Suraj)
v4:
- Re-arrange variable declaration (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-6-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add a color pipeline with three colorops in the sequence
1D LUT - 3x4 CTM - 1D LUT
This pipeline can be used to do any color space conversion or HDR
tone mapping
v2: Change namespace to drm_plane_colorop*
v3: Use simpler/pre-existing colorops for first iteration
v4:
- s/*_tf_*/*_color_* (Jani)
- Refactor to separate files (Jani)
- Add missing space in comment (Suraj)
- Consolidate patch that adds/attaches pipeline property
v5:
- Limit MAX_COLOR_PIPELINES to 2.(Suraj)
Increase it as and when we add more pipelines.
- Remove redundant initialization code (Suraj)
v6:
- Use drm_plane_create_color_pipeline_property() (Arun)
Now MAX_COLOR_PIPELINES is 1
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-5-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add intel colorop create helper
v2:
- Make function names consistent (Jani)
- Remove redundant code related to colorop state
- Refactor code to separate files
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-4-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add data structure to store intel specific details of colorop
v2:
- Remove dead code
- Convert macro to function (Jani)
- Remove colorop state as it is not being used
- Refactor to separate file
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-3-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add macros to identify intel specific color blocks. It will help
in mapping drm_color_ops to intel color HW blocks
v2:- Prefix enums with INTEL_* (Jani, Suraj)
- Remove unnecessary comments (Jani)
- Commit message improvements (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-2-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use-after-free and double-free bugs can be very difficult to track down.
The kernel is good at tracking these and preventing bad pages from being
used/created through simple checks gated behind "check_pages_enabled".
Currently, the only ways to enable this flag is by building with
CONFIG_DEBUG_VM, or as a side effect of other checks such as
init_on_{alloc, free}, page_poisoning, or debug_pagealloc among others.
These solutions are powerful, but may often be too coarse in balancing
the performance vs. safety that a user may want, particularly in
latency-sensitive production environments.
Introduce a new boot parameter "check_pages", which enables page checking
with no other side effects. It takes kstrbool-able inputs as an argument
(i.e. 0/1, true/false, on/off, ...). This patch is backwards-compatible;
setting CONFIG_DEBUG_VM still enables page checking.
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Link: https://patch.msgid.link/20251201180739.2330474-1-joshua.hahnjy@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay
Pull auxdisplay updates from Andy Shevchenko:
- Support linedisp attribute attachment to auxdisplay parent devices
* tag 'auxdisplay-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay:
auxdisplay: linedisp: support attribute attachment to auxdisplay devices
auxdisplay: linedisp: add num_chars sysfs attribute
auxdisplay: linedisp: display static message when length <= display size
auxdisplay: linedisp: encapsulate container_of usage within to_linedisp
docs: ABI: auxdisplay: document linedisp library sysfs attributes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New drivers:
- Mali-C55 ISP
- Rockchip VICAP (RKCIF)
- RKVDEC HEVC Decoder
- Renesas RZV2H IVC
- Sony IMX111 CMOS sensor driver
- Removed STi C8SECTPFE Driver
- Added a V4L2 ISP generic framework
- Usual set of cleanup, fixes and driver improvements
* tag 'media/v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (249 commits)
media: rockchip: rkcif: add support for rk3568 vicap mipi capture
media: rockchip: rkcif: add support for rk3568 vicap dvp capture
media: rockchip: rkcif: add support for px30 vip dvp capture
media: rockchip: rkcif: add abstraction for dma blocks
media: rockchip: rkcif: add abstraction for interface and crop blocks
media: rockchip: add driver for the rockchip camera interface
media: dt-bindings: add rockchip rk3568 vicap
media: dt-bindings: add rockchip px30 vip
media: dt-bindings: video-interfaces: add defines for sampling modes
Documentation: admin-guide: media: add rockchip camera interface
media: mali-c55: Mark pm handlers as __maybe_unused
media: mali-c55: Assert ISP blocks size correctness
media: v4l2-isp: Rename block_info to block_type_info
MAINTAINERS: Add entry for rzv2h-ivc driver
media: platform: Add Renesas Input Video Control block driver
dt-bindings: media: Add bindings for the RZ/V2H(P) IVC block
Documentation: media: mali-c55: Document the mali-c55 parameter setting
media: platform: Add mali-c55 parameters video node
media: uapi: Add parameters structs to mali-c55-config.h
media: mali-c55: Add image formats for Mali-C55 parameters buffer
...
|
|
for-next
|
|
The Makefile logic for building xe_sriov_vfio.o was added incorrectly,
as setting CONFIG_XE_VFIO_PCI=m means it doesn't get included into a
built-in xe driver:
ERROR: modpost: "xe_sriov_vfio_stop_copy_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_stop_copy_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_suspend_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_wait_flr_done" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_error" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_data_write" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_migration_supported" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
WARNING: modpost: suppressed 3 unresolved symbol warnings because there were too many)
Check for CONFIG_XE_VFIO_PCI being enabled in the Makefile to decide whether to
include the object instead.
Fixes: bd45d46ffc8f ("drm/xe/pf: Export helpers for VFIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251204094154.1029357-1-arnd@kernel.org
(cherry picked from commit ef7de33544a7a6783d7afe09496da362d1e90ba1)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
During system suspend, wakeup capable IRQs for block device can be
delayed, which can cause blk_mq_hctx_notify_offline() to hang
indefinitely while waiting for pending request to complete.
Skip the request waiting loop and abort suspend when wakeup events are
pending to prevent the deadlock.
Fixes: bf0beec0607d ("blk-mq: drain I/O when all CPUs in a hctx are offline")
Signed-off-by: Cong Zhang <cong.zhang@oss.qualcomm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a new helper function blk_rq_nr_bvec() that returns the number of
bvecs in a request. This count represents the number of iterations
rq_for_each_bvec() would perform on a request.
Drivers need to pre-allocate bvec arrays before iterating through
a request's bvecs. Currently, they manually count bvecs using
rq_for_each_bvec() in a loop, which is repetitive. The new helper
centralizes this logic.
This pattern exists in loop and zloop drivers, where multi-bio requests
require copying bvecs into a contiguous array before creating
an iov_iter for file operations.
Update loop and zloop drivers to use the new helper, eliminating
duplicate code.
This patch also provides a clear API to avoid any potential misuse of
blk_nr_phys_segments() for calculating the bvecs since, one bvec can
have more than one segments and use of blk_nr_phys_segments() can
lead to extra memory allocation :-
[ 6155.673749] nullb_bio: 128K bio as ONE bvec: sector=0, size=131072
[ 6155.673846] null_blk: #### null_handle_data_transfer:1375
[ 6155.673850] null_blk: nr_bvec=1 blk_rq_nr_phys_segments=2
[ 6155.674263] null_blk: #### null_handle_data_transfer:1375
[ 6155.674267] null_blk: nr_bvec=1 blk_rq_nr_phys_segments=1
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a Persistent Reservations ioctl to read the current reservation.
This calls the pr_ops->read_reservation() function that was previously
added in commit c787f1baa503 ("block: Add PR callouts for read keys and
reservation") but was only used by the in-kernel SCSI target so far.
The IOC_PR_READ_RESERVATION ioctl is necessary so that userspace
applications that rely on Persistent Reservations ioctls have a way of
inspecting the current state. Cluster managers and validation tests need
this functionality.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a Persistent Reservations ioctl to read the list of currently
registered reservation keys. This calls the pr_ops->read_keys() function
that was previously added in commit c787f1baa503 ("block: Add PR
callouts for read keys and reservation") but was only used by the
in-kernel SCSI target so far.
The IOC_PR_READ_KEYS ioctl is necessary so that userspace applications
that rely on Persistent Reservations ioctls have a way of inspecting the
current state. Cluster managers and validation tests need this
functionality.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The pr_read_keys() interface has a u32 num_keys parameter. The NVMe
Reservation Report command has a u32 maximum length. Reject num_keys
values that are too large to fit.
This will become important when pr_read_keys() is exposed to untrusted
userspace via an <linux/pr.h> ioctl.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The pr_read_keys() interface has a u32 num_keys parameter. The SCSI
PERSISTENT RESERVE IN command has a maximum READ KEYS service action
size of 65536 bytes. Reject num_keys values that are too large to fit
into the SCSI command.
This will become important when pr_read_keys() is exposed to untrusted
userspace via an <linux/pr.h> ioctl.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since after commit 12e4e8c7ab59 ("io_uring/rw: enable bio caches for
IRQ rw"), bio_put is safe for task and irq context, bio_alloc_bioset is
safe for task context and no one calls in irq context, so we can enable
per cpu bio cache by default.
Benchmarked with t/io_uring and ext4+nvme:
taskset -c 6 /root/fio/t/io_uring -p0 -d128 -b4096 -s1 -c1 -F1 -B1 -R1
-X1 -n1 -P1 /mnt/testfile
base IOPS is 562K, patch IOPS is 574K. The CPU usage of bio_alloc_bioset
decrease from 1.42% to 1.22%.
The worst case is allocate bio in CPU A but free in CPU B, still use
t/io_uring and ext4+nvme:
base IOPS is 648K, patch IOPS is 647K.
Also use fio test ext4/xfs with libaio/sync/io_uring on null_blk and
nvme, no obvious performance regression.
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use bio_alloc_bioset for passthru IO by default, so that we can enable
bio cache for irq and polled passthru IO in later.
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The io_uring_queue_async_work tracepoint event stores an int rw field
that represents whether the work item is hashed. Rename it to "hashed"
and change its type to bool to more accurately reflect its value.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a task has a pending signal when create_io_thread() is called,
copy_process() will return -ERESTARTNOINTR. io_should_retry_thread()
will request a retry of create_io_thread() up to WORKER_INIT_LIMIT = 3
times. If all retries fail, the io_uring request will fail with
ECANCELED.
Commit 3918315c5dc ("io-wq: backoff when retrying worker creation")
added a linear backoff to allow the thread to handle its signal before
the retry. However, a thread receiving frequent signals may get unlucky
and have a signal pending at every retry. Since the userspace task
doesn't control when it receives signals, there's no easy way for it to
prevent the create_io_thread() failure due to pending signals. The task
may also lack the information necessary to regenerate the canceled SQE.
So always retry the create_io_thread() on the ERESTART* errors,
analogous to what a fork() syscall would do. EAGAIN can occur due to
various persistent conditions such as exceeding RLIMIT_NPROC, so respect
the WORKER_INIT_LIMIT retry limit for EAGAIN errors.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the core of io_uring was updated to handle completions
consistently and with fixed return codes, the POLL_REMOVE opcode
with updates got slightly broken. If a POLL_ADD is pending and
then POLL_REMOVE is used to update the events of that request, if that
update causes the POLL_ADD to now trigger, then that completion is lost
and a CQE is never posted.
Additionally, ensure that if an update does cause an existing POLL_ADD
to complete, that the completion value isn't always overwritten with
-ECANCELED. For that case, whatever io_poll_add() set the value to
should just be retained.
Cc: stable@vger.kernel.org
Fixes: 97b388d70b53 ("io_uring: handle completions in the core")
Reported-by: syzbot+641eec6b7af1f62f2b99@syzkaller.appspotmail.com
Tested-by: syzbot+641eec6b7af1f62f2b99@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The check that determines if the message that warns about the per-dentry
timeout being greater than the super block timeout is not correct.
The initial value for this field is -1 and the type of the field is
unsigned long.
I could change the type to long but the message is in the wrong place
too, it should come after the timeout setting. So leave everything else
as it is and move the message and check the timeout is actually set
as an additional condition on issuing the message. Also fix the timeout
comparison.
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://patch.msgid.link/20251111060439.19593-2-raven@themaw.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Events may fail to open as no supported CPUs were specified on the
command line. In this case a confusing "error" message of "success"
can be reported. Let's skip the error in that case.
Before:
```
$ perf stat -C2048 -e cycles -- true
WARNING: A requested CPU in '2048' is not supported by PMU 'cpu' (CPUs 0-7) for event 'cycles'
Error:
No supported events found.
The sys_perf_event_open() syscall returned with 0 (Success) for event (cpu/unknown-hardware/).
"dmesg | grep -i perf" may provide additional information.
```
After:
```
$ perf stat -C2048 -e cycles -- true
WARNING: A requested CPU in '2048' is not supported by PMU 'cpu' (CPUs 0-7) for event 'cycles'
Error:
No supported events found.
```
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Ensure "--null" does a minimal run.
Reported-by: Ingo Molnar <mingo@kernel.org>
Closes: https://lore.kernel.org/linux-perf-users/aSwt7yzFjVJCEmVp@gmail.com/
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If the perf_cpu_map is empty or is just the any CPU value, then early
return. Don't process the "any" CPU when creating the bitmap.
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Passing an empty map to perf_cpu_map__max triggered a SEGV. Explicitly
test for the empty map.
Reported-by: Ingo Molnar <mingo@kernel.org>
Closes: https://lore.kernel.org/linux-perf-users/aSwt7yzFjVJCEmVp@gmail.com/
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
It is intended that a "--null" run doesn't open any events.
Fixes: 2cc7aa995ce9 ("perf stat: Refactor retry/skip/fatal error handling")
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Previously, the behavior of the multichannel and max_channels mount
options was inconsistent and order-dependent. For example, specifying
"multichannel,max_channels=1" would result in 2 channels, while
"max_channels=1,multichannel" would result in 1 channel. Additionally,
conflicting combinations such as "nomultichannel,max_channels=3" or
"multichannel,max_channels=1" did not produce errors and could lead to
unexpected channel counts.
This commit introduces two new fields in smb3_fs_context to explicitly
track whether multichannel and max_channels were specified during
mount. The option parsing and validation logic is updated to ensure:
- The outcome is no longer dependent on the order of options.
- Conflicting combinations (e.g., "nomultichannel,max_channels=3" or
"multichannel,max_channels=1") are detected and result in an error.
- The number of channels created is consistent with the specified
options.
This improves the reliability and predictability of mount option
handling for SMB3 multichannel support.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Rajasi Mandal <rajasimandal@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"New code:
- support timestamps prior to epoch
- do not overwrite uptodate pages
- disable readahead for compressed files
- setting of dummy blocksize to read boot_block when mounting
- the run_lock initialization when loading $Extend
- initialization of allocated memory before use
- support for the NTFS3_IOC_SHUTDOWN ioctl
- check for minimum alignment when performing direct I/O reads
- check for shutdown in fsync
Fixes:
- mount failure for sparse runs in run_unpack()
- use-after-free of sbi->options in cmp_fnames
- KMSAN uninit bug after failed mi_read in mi_format_new
- uninit error after buffer allocation by __getname()
- KMSAN uninit-value in ni_create_attr_list
- double free of sbi->options->nls and ownership of fc->fs_private
- incorrect vcn adjustments in attr_collapse_range()
- mode update when ACL can be reduced to mode
- memory leaks in add sub record
Changes:
- refactor code, updated terminology, spelling
- do not kmap pages in (de)compression code
- after ntfs_look_free_mft(), code that fails must put mft_inode
- default mount options for "acl" and "prealloc"
Replaced:
- use unsafe_memcpy() to avoid memcpy size warning
- ntfs_bio_pages with page cache for compressed files"
* tag 'ntfs3_for_6.19' of https://github.com/Paragon-Software-Group/linux-ntfs3: (26 commits)
fs/ntfs3: check for shutdown in fsync
fs/ntfs3: change the default mount options for "acl" and "prealloc"
fs/ntfs3: Prevent memory leaks in add sub record
fs/ntfs3: out1 also needs to put mi
fs/ntfs3: Fix spelling mistake "recommened" -> "recommended"
fs/ntfs3: update mode in xattr when ACL can be reduced to mode
fs/ntfs3: check minimum alignment for direct I/O
fs/ntfs3: implement NTFS3_IOC_SHUTDOWN ioctl
fs/ntfs3: correct attr_collapse_range when file is too fragmented
ntfs3: fix double free of sbi->options->nls and clarify ownership of fc->fs_private
fs/ntfs3: Initialize allocated memory before use
fs/ntfs3: remove ntfs_bio_pages and use page cache for compressed I/O
ntfs3: avoid memcpy size warning
fs/ntfs3: fix KMSAN uninit-value in ni_create_attr_list
ntfs3: init run lock for extend inode
ntfs: set dummy blocksize to read boot_block when mounting
fs/ntfs3: disable readahead for compressed files
ntfs3: Fix uninit buffer allocated by __getname()
ntfs3: fix uninit memory after failed mi_read in mi_format_new
ntfs3: fix use-after-free of sbi->options in cmp_fnames
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New features and improvements for the ext4 file system:
- Optimize online defragmentation by using folios instead of
individual buffer heads
- Improve error codes stored in the superblock when the journal
aborts
- Minor cleanups and clarifications in ext4_map_blocks()
- Add documentation of the casefold and encrypt flags
- Add support for file systems with a blocksize greater than the
pagesize
- Improve performance by enabling the caching the fact that an inode
does not have a Posix ACL
Various Bug Fixes:
- Fix false positive complaints from smatch
- Fix error code which is returned by ext4fs_dirhash() when Siphash
is used without the encryption key
- Fix races when writing to inline data files which could trigger a
BUG
- Fix potential NULL dereference when there is an corrupt file system
with an extended attribute value stored in a inode
- Fix false positive lockdep report when syzbot uses ext4 and ocfs2
together
- Fix false positive reported by DEPT by adjusting lock annotation
- Avoid a potential BUG_ON in jbd2 when a file system is massively
corrupted
- Fix a WARN_ON when superblock is corrupted with a non-NULL
terminated mount options field
- Add check if the userspace passes in a non-NULL terminated mount
options field to EXT4_IOC_SET_TUNE_SB_PARAM
- Fix a potential journal checksum failure whena file system is
copied while it is mounted read-only
- Fix a potential potential orphan file tracking error which only
showed on 32-bit systems
- Fix assertion checks in mballoc (which have to be explicitly enbled
by manually enabling AGGRESSIVE_CHECKS and recompiling)
- Avoid complaining about overly large orphan files created by mke2fs
with with file systems with a 64k block size"
* tag 'ext4_for_linus-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: mark inodes without acls in __ext4_iget()
ext4: enable block size larger than page size
ext4: add checks for large folio incompatibilities when BS > PS
ext4: support verifying data from large folios with fs-verity
ext4: make data=journal support large block size
ext4: support large block size in __ext4_block_zero_page_range()
ext4: support large block size in mpage_prepare_extent_to_map()
ext4: support large block size in mpage_map_and_submit_buffers()
ext4: support large block size in ext4_block_write_begin()
ext4: support large block size in ext4_mpage_readpages()
ext4: rename 'page' references to 'folio' in multi-block allocator
ext4: prepare buddy cache inode for BS > PS with large folios
ext4: support large block size in ext4_mb_init_cache()
ext4: support large block size in ext4_mb_get_buddy_page_lock()
ext4: support large block size in ext4_mb_load_buddy_gfp()
ext4: add EXT4_LBLK_TO_PG and EXT4_PG_TO_LBLK for block/page conversion
ext4: add EXT4_LBLK_TO_B macro for logical block to bytes conversion
ext4: support large block size in ext4_readdir()
ext4: support large block size in ext4_calculate_overhead()
ext4: introduce s_min_folio_order for future BS > PS support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Major withdraw / error handling overhaul based on dlm's new
DLM_RELEASE_RECOVER feature: this allows gfs to treat withdraws like
node failures. Make withdraws asynchronous
- Fix a bug in commit e4a8b5481c59a that caused 'df' to remain out of
sync. ('df' is still allowed to go slightly out of sync for short
periods of time)
- Prevent recusive memory reclaim in gfs2_unstuff_dinode()
- Clean up SDF_JOURNAL_LIVE flag handling
- Fix remote evict for read-only filesystems
- Fix a misuse of bio_chain()
- Various other minor cleanups
* tag 'gfs2-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (35 commits)
gfs2: Fix use of bio_chain
gfs2: Clean up SDF_JOURNAL_LIVE flag handling
gfs2: No longer thaw filesystems during a withdraw
gfs2: Withdraw immediately in gfs2_trans_add_meta
gfs2: New gfs2_withdraw_helper
gfs2: Clean up properly during a withdraw
gfs2: Rename gfs2_{gl_dq_holders => withdraw_glocks}
Revert "gfs2: fix infinite loop when checking ail item count before go_inval"
Revert "gfs2: Allow some glocks to be used during withdraw"
Revert "gfs2: Check for log write errors before telling dlm to unlock"
Revert "gfs2: fix a deadlock on withdraw-during-mount"
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (6/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (5/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (4/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (3/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (2/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (1/6)
Revert "gfs2: don't stop reads while withdraw in progress"
gfs2: Rename LM_FLAG_{NOEXP -> RECOVER}
gfs2: Kill gfs2_io_error_bh_wd
...
|
|
Pull smb client and server updates from Steve French:
- server fixes:
- IPC use after free locking fix
- fix locking bug in delete paths
- fix use after free in disconnect
- fix underflow in locking check
- error mapping improvement
- socket listening improvement
- return code mapping fixes
- crypto improvements (use default libraries)
- cleanup patches:
- netfs
- client checkpatch cleanup
- server cleanup
- move server/client duplicate code to common code
- fix some defines to better match protocol specification
- smbdirect (RDMA) fixes
- client debugging improvements for leases
* tag 'v6.19-rc-smb-fixes' of git://git.samba.org/ksmbd: (44 commits)
cifs: Use netfs_alloc/free_folioq_buffer()
smb: client: show smb lease key in open_dirs output
smb: client: show smb lease key in open_files output
ksmbd: ipc: fix use-after-free in ipc_msg_send_request
smb: client: relax WARN_ON_ONCE(SMBDIRECT_SOCKET_*) checks in recv_done() and smbd_conn_upcall()
smb: server: relax WARN_ON_ONCE(SMBDIRECT_SOCKET_*) checks in recv_done() and smb_direct_cm_handler()
smb: smbdirect: introduce SMBDIRECT_CHECK_STATUS_{WARN,DISCONNECT}()
smb: smbdirect: introduce SMBDIRECT_DEBUG_ERR_PTR() helper
ksmbd: vfs: fix race on m_flags in vfs_cache
ksmbd: Replace strcpy + strcat to improve convert_to_nt_pathname
smb: move FILE_SYSTEM_ATTRIBUTE_INFO to common/fscc.h
ksmbd: implement error handling for STATUS_INFO_LENGTH_MISMATCH in smb server
ksmbd: fix use-after-free in ksmbd_tree_connect_put under concurrency
ksmbd: server: avoid busy polling in accept loop
smb: move create_durable_reconn to common/smb2pdu.h
smb: fix some warnings reported by scripts/checkpatch.pl
smb: do some cleanups
smb: move FILE_SYSTEM_SIZE_INFO to common/fscc.h
smb: move some duplicate struct definitions to common/fscc.h
smb: move list of FileSystemAttributes to common/fscc.h
...
|
|
Pull xfs updates from Carlos Maiolino:
"There are no major changes in xfs. This contains mostly some code
cleanups, a few bug fixes and documentation update. Highlights are:
- Quota locking cleanup
- Getting rid of old xlog_in_core_2_t type"
* tag 'xfs-merge-6.19' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (33 commits)
docs: remove obsolete links in the xfs online repair documentation
xfs: move some code out of xfs_iget_recycle
xfs: use zi more in xfs_zone_gc_mount
xfs: remove the unused bv field in struct xfs_gc_bio
xfs: remove xarray mark for reclaimable zones
xfs: remove the xlog_in_core_t typedef
xfs: remove l_iclog_heads
xfs: remove the xlog_rec_header_t typedef
xfs: remove xlog_in_core_2_t
xfs: remove a very outdated comment from xlog_alloc_log
xfs: cleanup xlog_alloc_log a bit
xfs: don't use xlog_in_core_2_t in struct xlog_in_core
xfs: add a on-disk log header cycle array accessor
xfs: add a XLOG_CYCLE_DATA_SIZE constant
xfs: reduce ilock roundtrips in xfs_qm_vop_dqalloc
xfs: move xfs_dquot_tree calls into xfs_qm_dqget_cache_{lookup,insert}
xfs: move quota locking into xrep_quota_item
xfs: move quota locking into xqcheck_commit_dquot
xfs: move q_qlock locking into xqcheck_compare_dquot
xfs: move q_qlock locking into xchk_quota_item
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
- Fix a WARNING caused by a recent FSDAX misdetection regression
- Fix the filesystem stacking limit for file-backed mounts
- Print more informative diagnostics on decompression errors
- Switch the on-disk definition `erofs_fs.h` to the MIT license
- Minor cleanups
* tag 'erofs-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: switch on-disk header `erofs_fs.h` to MIT license
erofs: get rid of raw bi_end_io() usage
erofs: enable error reporting for z_erofs_fixup_insize()
erofs: enable error reporting for z_erofs_stream_switch_bufs()
erofs: improve Zstd, LZMA and DEFLATE error strings
erofs: improve decompression error reporting
erofs: tidy up z_erofs_lz4_handle_overlap()
erofs: limit the level of fs stacking for file-backed mounts
erofs: correct FSDAX detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs
Pull hfs/hfsplus updates from Viacheslav Dubeyko:
"Several fixes for syzbot reported issues, HFS/HFS+ fixes of xfstests
failures, Kunit-based unit-tests introduction, and code cleanup:
- Dan Carpenter fixed a potential use-after-free issue in
hfs_correct_next_unused_CNID() method. Tetsuo Handa has made nice
fix of syzbot reported issue related to incorrect inode->i_mode
management if volume has been corrupted somehow. Yang Chenzhi has
made really good fix of potential race condition in
__hfs_bnode_create() method for HFS+ file system.
- Several fixes to xfstests failures. Particularly, generic/070,
generic/073, and generic/101 test-cases finish successfully for the
case of HFS+ file system right now.
- HFS and HFS+ drivers share multiple structures of on-disk layout
declarations. Some structures are used without any change. However,
we had two independent declarations of the same structures in HFS
and HFS+ drivers.
The on-disk layout declarations have been moved into
include/linux/hfs_common.h with the goal to exclude the
declarations duplication and to keep the HFS/HFS+ on-disk layout
declarations in one place.
Also, this patch prepares the basis for creating a hfslib that can
aggregate common functionality without necessity to duplicate the
same code in HFS and HFS+ drivers.
- HFS/HFS+ really need unit-tests because of multiple xfstests
failures. The first two patches introduce Kunit-based unit-tests
for the case string operations in HFS/HFS+ file system drivers"
* tag 'hfs-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs:
hfs/hfsplus: move on-disk layout declarations into hfs_common.h
hfsplus: fix volume corruption issue for generic/101
hfsplus: introduce KUnit tests for HFS+ string operations
hfs: introduce KUnit tests for HFS string operations
hfsplus: fix volume corruption issue for generic/073
hfsplus: Verify inode mode when loading from disk
hfsplus: fix volume corruption issue for generic/070
hfs/hfsplus: prevent getting negative values of offset/length
hfsplus: fix missing hfs_bnode_get() in __hfs_bnode_create
hfs: fix potential use after free in hfs_correct_next_unused_CNID()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features:
- shutdown ioctl support (needs CONFIG_BTRFS_EXPERIMENTAL for now):
- set filesystem state as being shut down (also named going down
in other filesystems), where all active operations return EIO
and this cannot be changed until unmount
- pending operations are attempted to be finished but error
messages may still show up depending on where exactly the
shutdown happened
- scrub (and device replace) vs suspend/hibernate:
- a running scrub will prevent suspend, which can be annoying as
suspend is an immediate request and scrub is not critical
- filesystem freezing before suspend was not sufficient as the
problem was in process freezing
- behaviour change: on suspend scrub and device replace are
cancelled, where scrub can record the last state and continue
from there; the device replace has to be restarted from the
beginning
- zone stats exported in sysfs, from the perspective of the
filesystem this includes active, reclaimable, relocation etc zones
Performance:
- improvements when processing space reservation tickets by
optimizing locking and shrinking critical sections, cumulative
improvements in lockstat numbers show +15%
Notable fixes:
- use vmalloc fallback when allocating bios as high order allocations
can happen with wide checksums (like sha256)
- scrub will always track the last position of progress so it's not
starting from zero after an error
Core:
- under experimental config, checksum calculations are offloaded to
process context, simplifies locking and allows to remove
compression write worker kthread(s):
- speed improvement in direct IO throughput with buffered IO
fallback is +15% when not offloaded but this is more related to
internal crypto subsystem improvements
- this will be probably default in the future removing the sysfs
tunable
- (experimental) block size > page size updates:
- support more operations when not using large folios (encoded
read/write and send)
- raid56
- more preparations for fscrypt support
Other:
- more conversions to auto-cleaned variables
- parameter cleanups and removals
- extended warning fixes
- improved printing of structured values like keys
- lots of other cleanups and refactoring"
* tag 'for-6.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits)
btrfs: remove unnecessary inode key in btrfs_log_all_parents()
btrfs: remove redundant zero/NULL initializations in btrfs_alloc_root()
btrfs: remaining BTRFS_PATH_AUTO_FREE conversions
btrfs: send: do not allocate memory for xattr data when checking it exists
btrfs: send: add unlikely to all unexpected overflow checks
btrfs: reduce arguments to btrfs_del_inode_ref_in_log()
btrfs: remove root argument from btrfs_del_dir_entries_in_log()
btrfs: use test_and_set_bit() in btrfs_delayed_delete_inode_ref()
btrfs: don't search back for dir inode item in INO_LOOKUP_USER
btrfs: don't rewrite ret from inode_permission
btrfs: add orig_logical to btrfs_bio for encryption
btrfs: disable verity on encrypted inodes
btrfs: disable various operations on encrypted inodes
btrfs: remove redundant level reset in btrfs_del_items()
btrfs: simplify leaf traversal after path release in btrfs_next_old_leaf()
btrfs: optimize balance_level() path reference handling
btrfs: factor out root promotion logic into promote_child_to_root()
btrfs: raid56: remove the "_step" infix
btrfs: raid56: enable bs > ps support
btrfs: raid56: prepare finish_parity_scrub() to support bs > ps cases
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Fix head insertion for mq-deadline, a regression from when priority
support was added
- Series simplifying and improving the ublk user copy code
- Various ublk related cleanups
- Fixup REQ_NOWAIT handling in loop/zloop, clearing NOWAIT when the
request is punted to a thread for handling
- Merge and then later revert loop dio nowait support, as it ended up
causing excessive stack usage for when the inline issue code needs to
dip back into the full file system code
- Improve auto integrity code, making it less deadlock prone
- Speedup polled IO handling, but manually managing the hctx lookups
- Fixes for blk-throttle for SSD devices
- Small series with fixes for the S390 dasd driver
- Add support for caching zones, avoiding unnecessary report zone
queries
- MD pull requests via Yu:
- fix null-ptr-dereference regression for dm-raid0
- fix IO hang for raid5 when array is broken with IO inflight
- remove legacy 1s delay to speed up system shutdown
- change maintainer's email address
- data can be lost if array is created with different lbs devices,
fix this problem and record lbs of the array in metadata
- fix rcu protection for md_thread
- fix mddev kobject lifetime regression
- enable atomic writes for md-linear
- some cleanups
- bcache updates via Coly
- remove useless discard and cache device code
- improve usage of per-cpu workqueues
- Reorganize the IO scheduler switching code, fixing some lockdep
reports as well
- Improve the block layer P2P DMA support
- Add support to the block tracing code for zoned devices
- Segment calculation improves, and memory alignment flexibility
improvements
- Set of prep and cleanups patches for ublk batching support. The
actual batching hasn't been added yet, but helps shrink down the
workload of getting that patchset ready for 6.20
- Fix for how the ps3 block driver handles segments offsets
- Improve how block plugging handles batch tag allocations
- nbd fixes for use-after-free of the configuration on device clear/put
- Set of improvements and fixes for zloop
- Add Damien as maintainer of the block zoned device code handling
- Various other fixes and cleanups
* tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
block/rnbd: correct all kernel-doc complaints
blk-mq: use queue_hctx in blk_mq_map_queue_type
md: remove legacy 1s delay in md_notify_reboot
md/raid5: fix IO hang when array is broken with IO inflight
md: warn about updating super block failure
md/raid0: fix NULL pointer dereference in create_strip_zones() for dm-raid
sbitmap: fix all kernel-doc warnings
ublk: add helper of __ublk_fetch()
ublk: pass const pointer to ublk_queue_is_zoned()
ublk: refactor auto buffer register in ublk_dispatch_req()
ublk: add `union ublk_io_buf` with improved naming
ublk: add parameter `struct io_uring_cmd *` to ublk_prep_auto_buf_reg()
kfifo: add kfifo_alloc_node() helper for NUMA awareness
blk-mq: fix potential uaf for 'queue_hw_ctx'
blk-mq: use array manage hctx map instead of xarray
ublk: prevent invalid access with DEBUG
s390/dasd: Use scnprintf() instead of sprintf()
s390/dasd: Move device name formatting into separate function
s390/dasd: Remove unnecessary debugfs_create() return checks
s390/dasd: Fix gendisk parent after copy pair swap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Unify how task_work cancelations are detected, placing it in the
task_work running state rather than needing to check the task state
- Series cleaning up and moving the cancelation code to where it
belongs, in cancel.c
- Cleanup of waitid and futex argument handling
- Add support for mixed sized SQEs. 6.18 added support for mixed sized
CQEs, improving flexibility and efficiency of workloads that need big
CQEs. This adds similar support for SQEs, where the occasional need
for a 128b SQE doesn't necessitate having all SQEs be 128b in size
- Introduce zcrx and SQ/CQ layout queries. The former returns what zcrx
features are available. And both return the ring size information to
help with allocation size calculation for user provided rings like
IORING_SETUP_NO_MMAP and IORING_MEM_REGION_TYPE_USER
- Zcrx updates for 6.19. It includes a bunch of small patches,
IORING_REGISTER_ZCRX_CTRL and RQ flushing and David's work on sharing
zcrx b/w multiple io_uring instances
- Series cleaning up ring initializations, notable deduplicating ring
size and offset calculations. It also moves most of the checking
before doing any allocations, making the code simpler
- Add support for getsockname and getpeername, which is mostly a
trivial hookup after a bit of refactoring on the networking side
- Various fixes and cleanups
* tag 'for-6.19/io_uring-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring: Introduce getsockname io_uring cmd
socket: Split out a getsockname helper for io_uring
socket: Unify getsockname and getpeername implementation
io_uring/query: drop unused io_handle_query_entry() ctx arg
io_uring/kbuf: remove obsolete buf_nr_pages and update comments
io_uring/register: use correct location for io_rings_layout
io_uring/zcrx: share an ifq between rings
io_uring/zcrx: add io_fill_zcrx_offsets()
io_uring/zcrx: export zcrx via a file
io_uring/zcrx: move io_zcrx_scrub() and dependencies up
io_uring/zcrx: count zcrx users
io_uring/zcrx: add sync refill queue flushing
io_uring/zcrx: introduce IORING_REGISTER_ZCRX_CTRL
io_uring/zcrx: elide passing msg flags
io_uring/zcrx: use folio_nr_pages() instead of shift operation
io_uring/zcrx: convert to use netmem_desc
io_uring/query: introduce rings info query
io_uring/query: introduce zcrx query
io_uring: move cq/sq user offset init around
io_uring: pre-calculate scq layout
...
|
|
__blkdev_issue_discard() always returns 0, making the error assignment
in __submit_discard_cmd() dead code.
Initialize err to 0 and remove the error assignment from the
__blkdev_issue_discard() call to err. Move fault injection code into
already present if branch where err is set to -EIO.
This preserves the fault injection behavior while removing dead error
handling.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch optimizes the tracepoint by replacing these hardcoded strings
with a new enumeration f2fs_cp_phase.
1.Defines enum f2fs_cp_phase with values for each checkpoint phase.
2.Updates trace_f2fs_write_checkpoint to accept a u16 phase argument
instead of a string pointer.
3.Uses __print_symbolic in TP_printk to convert the enum values
back to their corresponding strings for human-readable trace output.
This change reduces the storage overhead for each trace event
by replacing a variable-length string with a 2-byte integer,
while maintaining the same readable output in ftrace.
Signed-off-by: YH Lin <yhli@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
w/ LFS mode, in get_left_section_blocks(), we should not account the
blocks which were used before and now are invalided, otherwise those
blocks will be counted as freed one in has_curseg_enough_space(), result
in missing to trigger GC in time.
Cc: stable@kernel.org
Fixes: 249ad438e1d9 ("f2fs: add a method for calculating the remaining blocks in the current segment in LFS mode.")
Fixes: bf34c93d2645 ("f2fs: check curseg space before foreground GC")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
cat /sys/kernel/debug/f2fs/status
Main area: 17 segs, 17 secs 17 zones
TYPE blkoff segno secno zoneno dirty_seg full_seg valid_blk
- COLD data: 0 4 4 4 0 0 0
- WARM data: 0 7 7 7 0 0 0
- HOT data: 1 5 5 5 2 0 512
- Dir dnode: 3 0 0 0 1 0 2
- File dnode: 0 1 1 1 0 0 0
- Indir nodes: 0 2 2 2 0 0 0
- Pinned file: 0 -1 -1 -1
- ATGC data: 0 -1 -1 -1
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Sphinx's LaTeX builder fails when converting the nested ASCII tables in
f2fs.rst, producing the following error:
"Markup is unsupported in LaTeX: longtable does not support nesting a table."
Wrap the affected ASCII tables in literal code blocks to force Sphinx to
render them verbatim. This prevents nested longtables and fixes the PDF
build failure on Sphinx 8.2.x.
Acked-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Masaharu Noguchi <nogunix@gmail.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
opt field in structure f2fs_mount_info and opt_mask field in structure
f2fs_fs_context is 32-bits variable, now we're running out of available
bits in them, let's expand them to 64-bits for better scalability.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch changes default schedule timeout value from 20ms to 1ms,
in order to give caller more chances to check whether IO or non-IO
congestion condition has already been mitigable.
In addition, default interval of periodical discard submission is
kept to 20ms.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In f2fs retry logic, we will call f2fs_io_schedule_timeout() to sleep as
uninterruptible state (waiting for IO) for a while, however, in several
paths below, we are not blocked by IO:
- f2fs_write_single_data_page() return -EAGAIN due to racing on cp_rwsem.
- f2fs_flush_device_cache() failed to submit preflush command.
- __issue_discard_cmd_range() sleeps periodically in between two in batch
discard submissions.
So, in order to reveal state of task more accurate, let's introduce
f2fs_schedule_timeout() and call it in above paths in where we are waiting
for non-IO reasons.
Then we can get real reason of uninterruptible sleep for a thread in
tracepoint, perfetto, etc.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
memalloc_retry_wait() is recommended in memory allocation retry logic,
use it as much as possible.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds a sysfs entry showing the max zones that F2FS can write
concurrently.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The usage of unusable_blocks_per_sec is already wrapped by
CONFIG_BLK_DEV_ZONED, except for its declaration and the definitions of
CAP_BLKS_PER_SEC and CAP_SEGS_PER_SEC. This patch ensures that all code
related to unusable_blocks_per_sec is properly wrapped under the
CONFIG_BLK_DEV_ZONED option.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In f2fs_recover_fsync_data(),use LIST_HEAD() to declare and
initialize the list_head in one step instead of using
INIT_LIST_HEAD() separately.
No functional change.
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The recent increase in the number of Segment Summary Area (SSA) entries
from 512 to 2048 was an unintentional change in logic of 16kb block
support. This commit corrects the issue.
To better utilize the space available from the erroneous 2048-entry
calculation, we are implementing a solution to share the currently
unused SSA space with neighboring segments. This enhances overall
SSA utilization without impacting the established 8MB segment size.
Fixes: d7e9a9037de2 ("f2fs: Support Block Size == Page Size")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
mkfs.f2fs -f /dev/vdd
mount /dev/vdd /mnt/f2fs
touch /mnt/f2fs/foo
sync # avoid CP_UMOUNT_FLAG in last f2fs_checkpoint.ckpt_flags
touch /mnt/f2fs/bar
f2fs_io fsync /mnt/f2fs/bar
f2fs_io shutdown 2 /mnt/f2fs
umount /mnt/f2fs
blockdev --setro /dev/vdd
mount /dev/vdd /mnt/f2fs
mount: /mnt/f2fs: WARNING: source write-protected, mounted read-only.
For the case if we create and fsync a new inode before sudden power-cut,
without norecovery or disable_roll_forward mount option, the following
mount will succeed w/o recovering last fsynced inode.
The problem here is that we only check inode_list list after
find_fsync_dnodes() in f2fs_recover_fsync_data() to find out whether
there is recoverable data in the iamge, but there is a missed case, if
last fsynced inode is not existing in last checkpoint, then, we will
fail to get its inode due to nat of inode node is not existing in last
checkpoint, so the inode won't be linked in inode_list.
Let's detect such case in dyrun mode to fix this issue.
After this change, mount will fail as expected below:
mount: /mnt/f2fs: cannot mount /dev/vdd read-only.
dmesg(1) may have more information after failed mount system call.
demsg:
F2FS-fs (vdd): Need to recover fsync data, but write access unavailable, please try mount w/ disable_roll_forward or norecovery
Cc: stable@kernel.org
Fixes: 6781eabba1bd ("f2fs: give -EINVAL for norecovery and rw mount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
With below scripts, it will trigger panic in f2fs:
mkfs.f2fs -f /dev/vdd
mount /dev/vdd /mnt/f2fs
touch /mnt/f2fs/foo
sync
echo 111 >> /mnt/f2fs/foo
f2fs_io fsync /mnt/f2fs/foo
f2fs_io shutdown 2 /mnt/f2fs
umount /mnt/f2fs
mount -o ro,norecovery /dev/vdd /mnt/f2fs
or
mount -o ro,disable_roll_forward /dev/vdd /mnt/f2fs
F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 0
F2FS-fs (vdd): Mounted with checkpoint version = 7f5c361f
F2FS-fs (vdd): Stopped filesystem due to reason: 0
F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 1
Filesystem f2fs get_tree() didn't set fc->root, returned 1
------------[ cut here ]------------
kernel BUG at fs/super.c:1761!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 722 Comm: mount Not tainted 6.18.0-rc2+ #721 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:vfs_get_tree.cold+0x18/0x1a
Call Trace:
<TASK>
fc_mount+0x13/0xa0
path_mount+0x34e/0xc50
__x64_sys_mount+0x121/0x150
do_syscall_64+0x84/0x800
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fa6cc126cfe
The root cause is we missed to handle error number returned from
f2fs_recover_fsync_data() when mounting image w/ ro,norecovery or
ro,disable_roll_forward mount option, result in returning a positive
error number to vfs_get_tree(), fix it.
Cc: stable@kernel.org
Fixes: 6781eabba1bd ("f2fs: give -EINVAL for norecovery and rw mount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This adds a tracepoint in the fadvise call path.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The age extent cache uses last_blocks (derived from
allocated_data_blocks) to determine data age. However, there's a
conflict between the deletion
marker (last_blocks=0) and legitimate last_blocks=0 cases when
allocated_data_blocks overflows to 0 after reaching ULLONG_MAX.
In this case, valid extents are incorrectly skipped due to the
"if (!tei->last_blocks)" check in __update_extent_tree_range().
This patch fixes the issue by:
1. Reserving ULLONG_MAX as an invalid/deletion marker
2. Limiting allocated_data_blocks to range [0, ULLONG_MAX-1]
3. Using F2FS_EXTENT_AGE_INVALID for deletion scenarios
4. Adjusting overflow age calculation from ULLONG_MAX to (ULLONG_MAX-1)
Reproducer (using a patched kernel with allocated_data_blocks
initialized to ULLONG_MAX - 3 for quick testing):
Step 1: Mount and check initial state
# dd if=/dev/zero of=/tmp/test.img bs=1M count=100
# mkfs.f2fs -f /tmp/test.img
# mkdir -p /mnt/f2fs_test
# mount -t f2fs -o loop,age_extent_cache /tmp/test.img /mnt/f2fs_test
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551612 # ULLONG_MAX - 3
Inner Struct Count: tree: 1(0), node: 0
Step 2: Create files and write data to trigger overflow
# touch /mnt/f2fs_test/{1,2,3,4}.txt; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551613 # ULLONG_MAX - 2
Inner Struct Count: tree: 5(0), node: 1
# dd if=/dev/urandom of=/mnt/f2fs_test/1.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551614 # ULLONG_MAX - 1
Inner Struct Count: tree: 5(0), node: 2
# dd if=/dev/urandom of=/mnt/f2fs_test/2.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551615 # ULLONG_MAX
Inner Struct Count: tree: 5(0), node: 3
# dd if=/dev/urandom of=/mnt/f2fs_test/3.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 0 # Counter overflowed!
Inner Struct Count: tree: 5(0), node: 4
Step 3: Trigger the bug - next write should create node but gets skipped
# dd if=/dev/urandom of=/mnt/f2fs_test/4.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 1
Inner Struct Count: tree: 5(0), node: 4
Expected: node: 5 (new extent node for 4.txt)
Actual: node: 4 (extent insertion was incorrectly skipped due to
last_blocks = allocated_data_blocks = 0 in __get_new_block_age)
After this fix, the extent node is correctly inserted and node count
becomes 5 as expected.
Fixes: 71644dff4811 ("f2fs: add block_age-based extent cache")
Cc: stable@kernel.org
Signed-off-by: Xiaole He <hexiaole1994@126.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Add check for inode->i_nlink == 1 for directories during unlink,
as their value is decremented twice, which can trigger a warning in
drop_nlink. In such case mark the filesystem as corrupted and return
from the function call with the relevant failure return value.
Additionally add the check for i_nlink == 1 in
sanity_check_inode in order to detect on-disk corruption early.
Reported-by: syzbot+c07d47c7bc68f47b9083@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c07d47c7bc68f47b9083
Tested-by: syzbot+c07d47c7bc68f47b9083@syzkaller.appspotmail.com
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Rename "fail" label to "out" as it's used as a default
exit path out of f2fs_unlink as well as error path.
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When F2FS uses multiple block devices, each device may have a
different discard granularity. The minimum trim granularity must be
at least the maximum discard granularity of all devices, excluding
zoned devices. Use max_t instead of the max() macro to compute the
maximum value.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The one_time_gc field in struct victim_sel_policy is conditionally
initialized but unconditionally read, leading to undefined behavior
that triggers UBSAN warnings.
In f2fs_get_victim() at fs/f2fs/gc.c:774, the victim_sel_policy
structure is declared without initialization:
struct victim_sel_policy p;
The field p.one_time_gc is only assigned when the 'one_time' parameter
is true (line 789):
if (one_time) {
p.one_time_gc = one_time;
...
}
However, this field is unconditionally read in subsequent get_gc_cost()
at line 395:
if (p->one_time_gc && (valid_thresh_ratio < 100) && ...)
When one_time is false, p.one_time_gc contains uninitialized stack
memory. Hence p.one_time_gc is an invalid bool value.
UBSAN detects this invalid bool value:
UBSAN: invalid-load in fs/f2fs/gc.c:395:7
load of value 77 is not a valid value for type '_Bool'
CPU: 3 UID: 0 PID: 1297 Comm: f2fs_gc-252:16 Not tainted 6.18.0-rc3
#5 PREEMPT(voluntary)
Hardware name: OpenStack Foundation OpenStack Nova,
BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x70/0x90
dump_stack+0x14/0x20
__ubsan_handle_load_invalid_value+0xb3/0xf0
? dl_server_update+0x2e/0x40
? update_curr+0x147/0x170
f2fs_get_victim.cold+0x66/0x134 [f2fs]
? sched_balance_newidle+0x2ca/0x470
? finish_task_switch.isra.0+0x8d/0x2a0
f2fs_gc+0x2ba/0x8e0 [f2fs]
? _raw_spin_unlock_irqrestore+0x12/0x40
? __timer_delete_sync+0x80/0xe0
? timer_delete_sync+0x14/0x20
? schedule_timeout+0x82/0x100
gc_thread_func+0x38b/0x860 [f2fs]
? gc_thread_func+0x38b/0x860 [f2fs]
? __pfx_autoremove_wake_function+0x10/0x10
kthread+0x10b/0x220
? __pfx_gc_thread_func+0x10/0x10 [f2fs]
? _raw_spin_unlock_irq+0x12/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork+0x11a/0x160
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
This issue is reliably reproducible with the following steps on a
100GB SSD /dev/vdb:
mkfs.f2fs -f /dev/vdb
mount /dev/vdb /mnt/f2fs_test
fio --name=gc --directory=/mnt/f2fs_test --rw=randwrite \
--bs=4k --size=8G --numjobs=12 --fsync=4 --runtime=10 \
--time_based
echo 1 > /sys/fs/f2fs/vdb/gc_urgent
The uninitialized value causes incorrect GC victim selection, leading
to unpredictable garbage collection behavior.
Fix by zero-initializing the entire victim_sel_policy structure to
ensure all fields have defined values.
Fixes: e791d00bd06c ("f2fs: add valid block ratio not to do excessive GC for one time GC")
Cc: stable@kernel.org
Signed-off-by: Xiaole He <hexiaole1994@126.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
It recommends to use i_size_{read,write}() to access and update i_size,
otherwise, we may get wrong tearing value due to high 32-bits value
and low 32-bits value of i_size field are not updated atomically in
32-bits archicture machine.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Xfstests generic/335, generic/336 sometimes crash with the following message:
F2FS-fs (dm-0): detect filesystem reference count leak during umount, type: 9, count: 1
------------[ cut here ]------------
kernel BUG at fs/f2fs/super.c:1939!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 609351 Comm: umount Tainted: G W 6.17.0-rc5-xfstests-g9dd1835ecda5 #1 PREEMPT(none)
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:f2fs_put_super+0x3b3/0x3c0
Call Trace:
<TASK>
generic_shutdown_super+0x7e/0x190
kill_block_super+0x1a/0x40
kill_f2fs_super+0x9d/0x190
deactivate_locked_super+0x30/0xb0
cleanup_mnt+0xba/0x150
task_work_run+0x5c/0xa0
exit_to_user_mode_loop+0xb7/0xc0
do_syscall_64+0x1ae/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]---
It appears that sometimes it is possible that f2fs_put_super() is called before
all node page reads are completed.
Adding a call to f2fs_wait_on_all_pages() for F2FS_RD_NODE fixes the problem.
Cc: stable@kernel.org
Fixes: 20872584b8c0b ("f2fs: fix to drop all dirty meta/node pages during umount()")
Signed-off-by: Jan Prusakowski <jprusakowski@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If there are too many background IOs during f2fs_enable_checkpoint(),
sync_inodes_sb() may be blocked for long time due to it will loop to
write dirty datas which are generated by in parallel write()
continuously.
Let's change as below to resolve this issue:
- hold cp_enable_rwsem write lock to block any cache/dio write
- decrease DEF_ENABLE_INTERVAL from 16 to 5
In addition, dump more logs during f2fs_enable_checkpoint().
Testcase:
1. fill data into filesystem until 90% usage.
2. mount -o remount,checkpoint=disable:10% /data
3. fio --rw=randwrite --bs=4kb --size=1GB --numjobs=10 \
--iodepth=64 --ioengine=psync --time_based --runtime=600 \
--directory=/data/fio_dir/ &
4. mount -o remount,checkpoint=enable /data
Before:
F2FS-fs (dm-51): f2fs_enable_checkpoint() finishes, writeback:7232, sync:39793, cp:457
After:
F2FS-fs (dm-51): f2fs_enable_checkpoint end, writeback:5032, lock:0, sync_inode:5552, sync_fs:84
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In order to let userspace detect such error rather than suffering
silent failure.
Fixes: 4354994f097d ("f2fs: checkpoint disabling")
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Change the type of the unlock parameter of f2fs_put_page to bool.
All callers should consistently pass true or false. No logical change.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
F2FS can mount filesystems with corrupted directory depth values that
get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT
operations are performed on such directories, f2fs_rename performs
directory modifications (updating target entry and deleting source
entry) before attempting to add the whiteout entry via f2fs_add_link.
If f2fs_add_link fails due to the corrupted directory structure, the
function returns an error to VFS, but the partial directory
modifications have already been committed to disk. VFS assumes the
entire rename operation failed and does not update the dentry cache,
leaving stale mappings.
In the error path, VFS does not call d_move() to update the dentry
cache. This results in new_dentry still pointing to the old inode
(new_inode) which has already had its i_nlink decremented to zero.
The stale cache causes subsequent operations to incorrectly reference
the freed inode.
This causes subsequent operations to use cached dentry information that
no longer matches the on-disk state. When a second rename targets the
same entry, VFS attempts to decrement i_nlink on the stale inode, which
may already have i_nlink=0, triggering a WARNING in drop_nlink().
Example sequence:
1. First rename (RENAME_WHITEOUT): file2 → file1
- f2fs updates file1 entry on disk (points to inode 8)
- f2fs deletes file2 entry on disk
- f2fs_add_link(whiteout) fails (corrupted directory)
- Returns error to VFS
- VFS does not call d_move() due to error
- VFS cache still has: file1 → inode 7 (stale!)
- inode 7 has i_nlink=0 (already decremented)
2. Second rename: file3 → file1
- VFS uses stale cache: file1 → inode 7
- Tries to drop_nlink on inode 7 (i_nlink already 0)
- WARNING in drop_nlink()
Fix this by explicitly invalidating old_dentry and new_dentry when
f2fs_add_link fails during whiteout creation. This forces VFS to
refresh from disk on subsequent operations, ensuring cache consistency
even when the rename partially succeeds.
Reproducer:
1. Mount F2FS image with corrupted i_current_depth
2. renameat2(file2, file1, RENAME_WHITEOUT)
3. renameat2(file3, file1, 0)
4. System triggers WARNING in drop_nlink()
Fixes: 7e01e7ad746b ("f2fs: support RENAME_WHITEOUT")
Reported-by: syzbot+632cf32276a9a564188d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=632cf32276a9a564188d
Suggested-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/all/20251022233349.102728-1-kartikey406@gmail.com/ [v1]
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Hong Yun reported in mailing list:
loop7: detected capacity change from 0 to 131072
------------[ cut here ]------------
kmem_cache of name 'f2fs_xattr_entry-7:7' already exists
WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 kmem_cache_sanity_check mm/slab_common.c:109 [inline]
WARNING: CPU: 0 PID: 24426 at mm/slab_common.c:110 __kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307
CPU: 0 UID: 0 PID: 24426 Comm: syz.7.1370 Not tainted 6.17.0-rc4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:kmem_cache_sanity_check mm/slab_common.c:109 [inline]
RIP: 0010:__kmem_cache_create_args+0xa6/0x320 mm/slab_common.c:307
Call Trace:
__kmem_cache_create include/linux/slab.h:353 [inline]
f2fs_kmem_cache_create fs/f2fs/f2fs.h:2943 [inline]
f2fs_init_xattr_caches+0xa5/0xe0 fs/f2fs/xattr.c:843
f2fs_fill_super+0x1645/0x2620 fs/f2fs/super.c:4918
get_tree_bdev_flags+0x1fb/0x260 fs/super.c:1692
vfs_get_tree+0x43/0x140 fs/super.c:1815
do_new_mount+0x201/0x550 fs/namespace.c:3808
do_mount fs/namespace.c:4136 [inline]
__do_sys_mount fs/namespace.c:4347 [inline]
__se_sys_mount+0x298/0x2f0 fs/namespace.c:4324
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x8e/0x3a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The bug can be reproduced w/ below scripts:
- mount /dev/vdb /mnt1
- mount /dev/vdc /mnt2
- umount /mnt1
- mounnt /dev/vdb /mnt1
The reason is if we created two slab caches, named f2fs_xattr_entry-7:3
and f2fs_xattr_entry-7:7, and they have the same slab size. Actually,
slab system will only create one slab cache core structure which has
slab name of "f2fs_xattr_entry-7:3", and two slab caches share the same
structure and cache address.
So, if we destroy f2fs_xattr_entry-7:3 cache w/ cache address, it will
decrease reference count of slab cache, rather than release slab cache
entirely, since there is one more user has referenced the cache.
Then, if we try to create slab cache w/ name "f2fs_xattr_entry-7:3" again,
slab system will find that there is existed cache which has the same name
and trigger the warning.
Let's changes to use global inline_xattr_slab instead of per-sb slab cache
for fixing.
Fixes: a999150f4fe3 ("f2fs: use kmem_cache pool during inline xattr lookups")
Cc: stable@kernel.org
Reported-by: Hong Yun <yhong@link.cuhk.edu.hk>
Tested-by: Hong Yun <yhong@link.cuhk.edu.hk>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Bai, Shuangpeng <sjb7183@psu.edu> reported a bug as below:
Oops: divide error: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 11441 Comm: syz.0.46 Not tainted 6.17.0 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:f2fs_all_cluster_page_ready+0x106/0x550 fs/f2fs/compress.c:857
Call Trace:
<TASK>
f2fs_write_cache_pages fs/f2fs/data.c:3078 [inline]
__f2fs_write_data_pages fs/f2fs/data.c:3290 [inline]
f2fs_write_data_pages+0x1c19/0x3600 fs/f2fs/data.c:3317
do_writepages+0x38e/0x640 mm/page-writeback.c:2634
filemap_fdatawrite_wbc mm/filemap.c:386 [inline]
__filemap_fdatawrite_range mm/filemap.c:419 [inline]
file_write_and_wait_range+0x2ba/0x3e0 mm/filemap.c:794
f2fs_do_sync_file+0x6e6/0x1b00 fs/f2fs/file.c:294
generic_write_sync include/linux/fs.h:3043 [inline]
f2fs_file_write_iter+0x76e/0x2700 fs/f2fs/file.c:5259
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x7e9/0xe00 fs/read_write.c:686
ksys_write+0x19d/0x2d0 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf7/0x470 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The bug was triggered w/ below race condition:
fsync setattr ioctl
- f2fs_do_sync_file
- file_write_and_wait_range
- f2fs_write_cache_pages
: inode is non-compressed
: cc.cluster_size =
F2FS_I(inode)->i_cluster_size = 0
- tag_pages_for_writeback
- f2fs_setattr
- truncate_setsize
- f2fs_truncate
- f2fs_fileattr_set
- f2fs_setflags_common
- set_compress_context
: F2FS_I(inode)->i_cluster_size = 4
: set_inode_flag(inode, FI_COMPRESSED_FILE)
- f2fs_compressed_file
: return true
- f2fs_all_cluster_page_ready
: "pgidx % cc->cluster_size" trigger dividing 0 issue
Let's change as below to fix this issue:
- introduce a new atomic type variable .writeback in structure f2fs_inode_info
to track the number of threads which calling f2fs_write_cache_pages().
- use .i_sem lock to protect .writeback update.
- check .writeback before update compression context in f2fs_setflags_common()
to avoid race w/ ->writepages.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Cc: stable@kernel.org
Reported-by: Bai, Shuangpeng <sjb7183@psu.edu>
Tested-by: Bai, Shuangpeng <sjb7183@psu.edu>
Closes: https://lore.kernel.org/lkml/44D8F7B3-68AD-425F-9915-65D27591F93F@psu.edu
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As syzbot reported:
F2FS-fs (loop0): __update_extent_tree_range: extent len is zero, type: 0, extent [0, 0, 0], age [0, 0]
------------[ cut here ]------------
kernel BUG at fs/f2fs/extent_cache.c:678!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:__update_extent_tree_range+0x13bc/0x1500 fs/f2fs/extent_cache.c:678
Call Trace:
<TASK>
f2fs_update_read_extent_cache_range+0x192/0x3e0 fs/f2fs/extent_cache.c:1085
f2fs_do_zero_range fs/f2fs/file.c:1657 [inline]
f2fs_zero_range+0x10c1/0x1580 fs/f2fs/file.c:1737
f2fs_fallocate+0x583/0x990 fs/f2fs/file.c:2030
vfs_fallocate+0x669/0x7e0 fs/open.c:342
ioctl_preallocate fs/ioctl.c:289 [inline]
file_ioctl+0x611/0x780 fs/ioctl.c:-1
do_vfs_ioctl+0xb33/0x1430 fs/ioctl.c:576
__do_sys_ioctl fs/ioctl.c:595 [inline]
__se_sys_ioctl+0x82/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f07bc58eec9
In error path of f2fs_zero_range(), it may add a zero-sized extent
into extent cache, it should be avoided.
Fixes: 6e9619499f53 ("f2fs: support in batch fzero in dnode page")
Cc: stable@kernel.org
Reported-by: syzbot+24124df3170c3638b35f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/68e5d698.050a0220.256323.0032.GAE@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Jiaming Zhang and syzbot reported, there is potential deadlock in
f2fs as below:
Chain exists of:
&sbi->cp_rwsem --> fs_reclaim --> sb_internal#2
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(sb_internal#2);
lock(fs_reclaim);
lock(sb_internal#2);
rlock(&sbi->cp_rwsem);
*** DEADLOCK ***
3 locks held by kswapd0/73:
#0: ffffffff8e247a40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:7015 [inline]
#0: ffffffff8e247a40 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0x951/0x2800 mm/vmscan.c:7389
#1: ffff8880118400e0 (&type->s_umount_key#50){.+.+}-{4:4}, at: super_trylock_shared fs/super.c:562 [inline]
#1: ffff8880118400e0 (&type->s_umount_key#50){.+.+}-{4:4}, at: super_cache_scan+0x91/0x4b0 fs/super.c:197
#2: ffff888011840610 (sb_internal#2){.+.+}-{0:0}, at: f2fs_evict_inode+0x8d9/0x1b60 fs/f2fs/inode.c:890
stack backtrace:
CPU: 0 UID: 0 PID: 73 Comm: kswapd0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_circular_bug+0x2ee/0x310 kernel/locking/lockdep.c:2043
check_noncircular+0x134/0x160 kernel/locking/lockdep.c:2175
check_prev_add kernel/locking/lockdep.c:3165 [inline]
check_prevs_add kernel/locking/lockdep.c:3284 [inline]
validate_chain+0xb9b/0x2140 kernel/locking/lockdep.c:3908
__lock_acquire+0xab9/0xd20 kernel/locking/lockdep.c:5237
lock_acquire+0x120/0x360 kernel/locking/lockdep.c:5868
down_read+0x46/0x2e0 kernel/locking/rwsem.c:1537
f2fs_down_read fs/f2fs/f2fs.h:2278 [inline]
f2fs_lock_op fs/f2fs/f2fs.h:2357 [inline]
f2fs_do_truncate_blocks+0x21c/0x10c0 fs/f2fs/file.c:791
f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:867
f2fs_truncate+0x489/0x7c0 fs/f2fs/file.c:925
f2fs_evict_inode+0x9f2/0x1b60 fs/f2fs/inode.c:897
evict+0x504/0x9c0 fs/inode.c:810
f2fs_evict_inode+0x1dc/0x1b60 fs/f2fs/inode.c:853
evict+0x504/0x9c0 fs/inode.c:810
dispose_list fs/inode.c:852 [inline]
prune_icache_sb+0x21b/0x2c0 fs/inode.c:1000
super_cache_scan+0x39b/0x4b0 fs/super.c:224
do_shrink_slab+0x6ef/0x1110 mm/shrinker.c:437
shrink_slab_memcg mm/shrinker.c:550 [inline]
shrink_slab+0x7ef/0x10d0 mm/shrinker.c:628
shrink_one+0x28a/0x7c0 mm/vmscan.c:4955
shrink_many mm/vmscan.c:5016 [inline]
lru_gen_shrink_node mm/vmscan.c:5094 [inline]
shrink_node+0x315d/0x3780 mm/vmscan.c:6081
kswapd_shrink_node mm/vmscan.c:6941 [inline]
balance_pgdat mm/vmscan.c:7124 [inline]
kswapd+0x147c/0x2800 mm/vmscan.c:7389
kthread+0x70e/0x8a0 kernel/kthread.c:463
ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
The root cause is deadlock among four locks as below:
kswapd
- fs_reclaim --- Lock A
- shrink_one
- evict
- f2fs_evict_inode
- sb_start_intwrite --- Lock B
- iput
- evict
- f2fs_evict_inode
- sb_start_intwrite --- Lock B
- f2fs_truncate
- f2fs_truncate_blocks
- f2fs_do_truncate_blocks
- f2fs_lock_op --- Lock C
ioctl
- f2fs_ioc_commit_atomic_write
- f2fs_lock_op --- Lock C
- __f2fs_commit_atomic_write
- __replace_atomic_write_block
- f2fs_get_dnode_of_data
- __get_node_folio
- f2fs_check_nid_range
- f2fs_handle_error
- f2fs_record_errors
- f2fs_down_write --- Lock D
open
- do_open
- do_truncate
- security_inode_need_killpriv
- f2fs_getxattr
- lookup_all_xattrs
- f2fs_handle_error
- f2fs_record_errors
- f2fs_down_write --- Lock D
- f2fs_commit_super
- read_mapping_folio
- filemap_alloc_folio_noprof
- prepare_alloc_pages
- fs_reclaim_acquire --- Lock A
In order to avoid such deadlock, we need to avoid grabbing sb_lock in
f2fs_handle_error(), so, let's use asynchronous method instead:
- remove f2fs_handle_error() implementation
- rename f2fs_handle_error_async() to f2fs_handle_error()
- spread f2fs_handle_error()
Fixes: 95fa90c9e5a7 ("f2fs: support recording errors into superblock")
Cc: stable@kernel.org
Reported-by: syzbot+14b90e1156b9f6fc1266@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/68eae49b.050a0220.ac43.0001.GAE@google.com
Reported-by: Jiaming Zhang <r772577952@gmail.com>
Closes: https://lore.kernel.org/lkml/CANypQFa-Gy9sD-N35o3PC+FystOWkNuN8pv6S75HLT0ga-Tzgw@mail.gmail.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Use f2fs_filemap_get_folio() instead of __filemap_get_folio() in:
- f2fs_find_data_folio
- f2fs_write_begin
- f2fs_read_merkle_tree_page
So that, we can trigger fault injection in those places.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Let's use f2fs_filemap_get_folio() instead of f2fs_pagecache_get_page() in
ra_data_block() and move_data_block(), then remove f2fs_pagecache_get_page()
since it has no user.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
No logic changes.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In add_bio_entry(), adding a page to newly allocated bio should never fail,
let's use bio_add_folio_nofail() instead of bio_add_page() & unnecessary
error handling for cleanup.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to
test_progs runner (Alexis Lothoré)
- Convert selftests/bpf/test_xsk to test_progs runner (Bastien
Curutchet)
- Replace bpf memory allocator with kmalloc_nolock() in
bpf_local_storage (Amery Hung), and in bpf streams and range tree
(Puranjay Mohan)
- Introduce support for indirect jumps in BPF verifier and x86 JIT
(Anton Protopopov) and arm64 JIT (Puranjay Mohan)
- Remove runqslower bpf tool (Hoyeon Lee)
- Fix corner cases in the verifier to close several syzbot reports
(Eduard Zingerman, KaFai Wan)
- Several improvements in deadlock detection in rqspinlock (Kumar
Kartikeya Dwivedi)
- Implement "jmp" mode for BPF trampoline and corresponding
DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance
from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong)
- Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul
Chaignon)
- Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel
Borkmann)
- Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko)
- Optimize bpf_map_update_elem() for map-in-map types (Ritesh
Oedayrajsingh Varma)
- Introduce overwrite mode for BPF ring buffer (Xu Kuohai)
* tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits)
bpf: optimize bpf_map_update_elem() for map-in-map types
bpf: make kprobe_multi_link_prog_run always_inline
selftests/bpf: do not hardcode target rate in test_tc_edt BPF program
selftests/bpf: remove test_tc_edt.sh
selftests/bpf: integrate test_tc_edt into test_progs
selftests/bpf: rename test_tc_edt.bpf.c section to expose program type
selftests/bpf: Add success stats to rqspinlock stress test
rqspinlock: Precede non-head waiter queueing with AA check
rqspinlock: Disable spinning for trylock fallback
rqspinlock: Use trylock fallback when per-CPU rqnode is busy
rqspinlock: Perform AA checks immediately
rqspinlock: Enclose lock/unlock within lock entry acquisitions
bpf: Remove runqslower tool
selftests/bpf: Remove usage of lsm/file_alloc_security in selftest
bpf: Disable file_alloc_security hook
bpf: check for insn arrays in check_ptr_alignment
bpf: force BPF_F_RDONLY_PROG on insn array creation
bpf: Fix exclusive map memory leak
selftests/bpf: Make CS length configurable for rqspinlock stress test
selftests/bpf: Add lock wait time stats to rqspinlock stress test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- Make filter parameters configurable via Kconfig
- Add description of kunit.enable parameter to documentation
* tag 'linux_kselftest-kunit-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Make filter parameters configurable via Kconfig
Documentation: kunit: add description of kunit.enable parameter
|
|
The error path of copying the old config used the wrong variable in the
error message:
$ mkdir /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad
$ chmod 0 /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good
cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED!
Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744.
failed to copy to config-good.tmp
When it should have shown:
failed to copy /tmp/build//.config to config-good.tmp
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Fixes: 0f0db065999cf ("ktest: Add standalone config-bisect.pl program")
Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home
Reported-by: "John W. Krahn" <jwkrahn@shaw.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The JH7110 pinctrl driver currently sets a static GPIO base number from
platform data:
sfp->gc.base = info->gc_base;
Static base assignment is deprecated and results in the following warning:
gpio gpiochip0: Static allocation of GPIO base is deprecated,
use dynamic allocation.
Set `sfp->gc.base = -1` to let the GPIO core dynamically allocate
the base number. This removes the warning and aligns the driver
with current GPIO guidelines.
Since the GPIO base is now allocated dynamically, remove `gc_base` field in
`struct jh7110_pinctrl_soc_info` and the associated `JH7110_SYS_GC_BASE`
and `JH7110_AON_GC_BASE` constants as they are no longer used anywhere
in the driver.
Tested on VisionFive 2 (JH7110 SoC).
Signed-off-by: Ali Tariq <alitariq45892@gmail.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
pcs_pinconf_get() and pcs_pinconf_set() declare ret as unsigned int,
but assign it the return values of pcs_get_function() that may return
negative error codes. This causes negative error codes to be
converted to large positive values.
Change ret from unsigned int to int in both functions.
Fixes: 9dddb4df90d1 ("pinctrl: single: support generic pinconf")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- Add basic test for trace_marker_raw file to tracing selftest
- Fix invalid array access in printf dma_map_benchmark selftest
- Add tprobe enable/disable testcase to tracing selftest
- Update fprobe selftest for ftrace based fprobe
* tag 'linux_kselftest-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Update fprobe selftest for ftrace based fprobe
selftests: tracing: Add tprobe enable/disable testcase
selftests/run_kselftest.sh: exit with error if tests fail
selftests/dma: fix invalid array access in printf
selftests/tracing: Add basic test for trace_marker_raw file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nicolas Schier:
- Enable -fms-extensions, allowing anonymous use of tagged struct or
union in struct/union (tag kbuild-ms-extensions-6.19). An exemplary
conversion patch is added here, too (btrfs).
[ Editor's note: the core of this actually came in early through a
shared branch and a few other trees - Linus ]
- Introduce architecture-specific CC_CAN_LINK and flags for userprogs
- Add new packaging target 'modules-cpio-pkg' for building a initramfs
cpio w/ kmods
- Handle included .c files in gen_compile_commands
- Minor kbuild changes:
- Use objtree for module signing key path, fixing oot kmod signing
- Improve documentation of KBUILD_BUILD_TIMESTAMP
- Reuse KBUILD_USERCFLAGS for UAPI, instead of defining twice
- Rename scripts/Makefile.extrawarn to Makefile.warn
- Drop obsolete types.h check from headers_check.pl
- Remove outdated config leak ignore entries
* tag 'kbuild-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: add target to build a cpio containing modules
initramfs: add gen_init_cpio to hostprogs unconditionally
kbuild: allow architectures to override CC_CAN_LINK
init: deduplicate cc-can-link.sh invocations
kbuild: don't enable CC_CAN_LINK if the dummy program generates warnings
scripts: headers_install.sh: Remove two outdated config leak ignore entries
scripts/clang-tools: Handle included .c files in gen_compile_commands
kbuild: uapi: Drop types.h check from headers_check.pl
kbuild: Rename Makefile.extrawarn to Makefile.warn
MAINTAINERS, .mailmap: Update mail address for Nicolas Schier
kbuild: uapi: reuse KBUILD_USERCFLAGS
kbuild: doc: improve KBUILD_BUILD_TIMESTAMP documentation
kbuild: Use objtree for module signing key path
btrfs: send: make use of -fms-extensions for defining struct fs_path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Add support for 'syn'.
Syn is a parsing library for parsing a stream of Rust tokens into a
syntax tree of Rust source code.
Currently this library is geared toward use in Rust procedural
macros, but contains some APIs that may be useful more generally.
'syn' allows us to greatly simplify writing complex macros such as
'pin-init' (Benno has already prepared the 'syn'-based version). We
will use it in the 'macros' crate too.
'syn' is the most downloaded Rust crate (according to crates.io),
and it is also used by the Rust compiler itself. While the amount
of code is substantial, there should not be many updates needed for
these crates, and even if there are, they should not be too big,
e.g. +7k -3k lines across the 3 crates in the last year.
'syn' requires two smaller dependencies: 'quote' and 'proc-macro2'.
I only modified their code to remove a third dependency
('unicode-ident') and to add the SPDX identifiers. The code can be
easily verified to exactly match upstream with the provided
scripts.
They are all licensed under "Apache-2.0 OR MIT", like the other
vendored 'alloc' crate we had for a while.
Please see the merge commit with the cover letter for more context.
- Allow 'unreachable_pub' and 'clippy::disallowed_names' for
doctests.
Examples (i.e. doctests) may want to do things like show public
items and use names such as 'foo'.
Nevertheless, we still try to keep examples as close to real code
as possible (this is part of why running Clippy on doctests is
important for us, e.g. for safety comments, which userspace Rust
does not support yet but we are stricter).
'kernel' crate:
- Replace our custom 'CStr' type with 'core::ffi::CStr'.
Using the standard library type reduces our custom code footprint,
and we retain needed custom functionality through an extension
trait and a new 'fmt!' macro which replaces the previous 'core'
import.
This started in 6.17 and continued in 6.18, and we finally land the
replacement now. This required quite some stamina from Tamir, who
split the changes in steps to prepare for the flag day change here.
- Replace 'kernel::c_str!' with C string literals.
C string literals were added in Rust 1.77, which produce '&CStr's
(the 'core' one), so now we can write:
c"hi"
instead of:
c_str!("hi")
- Add 'num' module for numerical features.
It includes the 'Integer' trait, implemented for all primitive
integer types.
It also includes the 'Bounded' integer wrapping type: an integer
value that requires only the 'N' least significant bits of the
wrapped type to be encoded:
// An unsigned 8-bit integer, of which only the 4 LSBs are used.
let v = Bounded::<u8, 4>::new::<15>();
assert_eq!(v.get(), 15);
'Bounded' is useful to e.g. enforce guarantees when working with
bitfields that have an arbitrary number of bits.
Values can also be constructed from simple non-constant expressions
or, for more complex ones, validated at runtime.
'Bounded' also comes with comparison and arithmetic operations
(with both their backing type and other 'Bounded's with a
compatible backing type), casts to change the backing type,
extending/shrinking and infallible/fallible conversions from/to
primitives as applicable.
- 'rbtree' module: add immutable cursor ('Cursor').
It enables to use just an immutable tree reference where
appropriate. The existing fully-featured mutable cursor is renamed
to 'CursorMut'.
kallsyms:
- Fix wrong "big" kernel symbol type read from procfs.
'pin-init' crate:
- A couple minor fixes (Benno asked me to pick these patches up for
him this cycle).
Documentation:
- Quick Start guide: add Debian 13 (Trixie).
Debian Stable is now able to build Linux, since Debian 13 (released
2025-08-09) packages Rust 1.85.0, which is recent enough.
We are planning to propose that the minimum supported Rust version
in Linux follows Debian Stable releases, with Debian 13 being the
first one we upgrade to, i.e. Rust 1.85.
MAINTAINERS:
- Add entry for the new 'num' module.
- Remove Alex as Rust maintainer: he hasn't had the time to
contribute for a few years now, so it is a no-op change in
practice.
And a few other cleanups and improvements"
* tag 'rust-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (53 commits)
rust: macros: support `proc-macro2`, `quote` and `syn`
rust: syn: enable support in kbuild
rust: syn: add `README.md`
rust: syn: remove `unicode-ident` dependency
rust: syn: add SPDX License Identifiers
rust: syn: import crate
rust: quote: enable support in kbuild
rust: quote: add `README.md`
rust: quote: add SPDX License Identifiers
rust: quote: import crate
rust: proc-macro2: enable support in kbuild
rust: proc-macro2: add `README.md`
rust: proc-macro2: remove `unicode_ident` dependency
rust: proc-macro2: add SPDX License Identifiers
rust: proc-macro2: import crate
rust: kbuild: support using libraries in `rustc_procmacro`
rust: kbuild: support skipping flags in `rustc_test_library`
rust: kbuild: add proc macro library support
rust: kbuild: simplify `--cfg` handling
rust: kbuild: introduce `core-flags` and `core-skip_flags`
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Support both paths where tracefs is typically mounted in selftests
- Make old_sympos 0 and 1 equal. They both are valid when there is only
one symbol with the given name.
* tag 'livepatching-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: use canonical ftrace path
livepatch: Match old_sympos 0 and 1 in klp_find_func()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Improve recovery from misbehaving BPF schedulers.
When a scheduler puts many tasks with varying affinity restrictions
on a shared DSQ, CPUs scanning through tasks they cannot run can
overwhelm the system, causing lockups.
Bypass mode now uses per-CPU DSQs with a load balancer to avoid this,
and hooks into the hardlockup detector to attempt recovery.
Add scx_cpu0 example scheduler to demonstrate this scenario.
- Add lockless peek operation for DSQs to reduce lock contention for
schedulers that need to query queue state during load balancing.
- Allow scx_bpf_reenqueue_local() to be called from anywhere in
preparation for deprecating cpu_acquire/release() callbacks in favor
of generic BPF hooks.
- Prepare for hierarchical scheduler support: add
scx_bpf_task_set_slice() and scx_bpf_task_set_dsq_vtime() kfuncs,
make scx_bpf_dsq_insert*() return bool, and wrap kfunc args in
structs for future aux__prog parameter.
- Implement cgroup_set_idle() callback to notify BPF schedulers when a
cgroup's idle state changes.
- Fix migration tasks being incorrectly downgraded from
stop_sched_class to rt_sched_class across sched_ext enable/disable.
Applied late as the fix is low risk and the bug subtle but needs
stable backporting.
- Various fixes and cleanups including cgroup exit ordering,
SCX_KICK_WAIT reliability, and backward compatibility improvements.
* tag 'sched_ext-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (44 commits)
sched_ext: Fix incorrect sched_class settings for per-cpu migration tasks
sched_ext: tools: Removing duplicate targets during non-cross compilation
sched_ext: Use kvfree_rcu() to release per-cpu ksyncs object
sched_ext: Pass locked CPU parameter to scx_hardlockup() and add docs
sched_ext: Update comments replacing breather with aborting mechanism
sched_ext: Implement load balancer for bypass mode
sched_ext: Factor out abbreviated dispatch dequeue into dispatch_dequeue_locked()
sched_ext: Factor out scx_dsq_list_node cursor initialization into INIT_DSQ_LIST_CURSOR
sched_ext: Add scx_cpu0 example scheduler
sched_ext: Hook up hardlockup detector
sched_ext: Make handle_lockup() propagate scx_verror() result
sched_ext: Refactor lockup handlers into handle_lockup()
sched_ext: Make scx_exit() and scx_vexit() return bool
sched_ext: Exit dispatch and move operations immediately when aborting
sched_ext: Simplify breather mechanism with scx_aborting flag
sched_ext: Use per-CPU DSQs instead of per-node global DSQs in bypass mode
sched_ext: Refactor do_enqueue_task() local and global DSQ paths
sched_ext: Use shorter slice in bypass mode
sched_ext: Mark racy bitfields to prevent adding fields that can't tolerate races
sched_ext: Minor cleanups to scx_task_iter
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Defer task cgroup unlink until after the dying task's final context
switch so that controllers see the cgroup properly populated until
the task is truly gone
- cpuset cleanups and simplifications.
Enforce that domain isolated CPUs stay in root or isolated partitions
and fail if isolated+nohz_full would leave no housekeeping CPU. Fix
sched/deadline root domain handling during CPU hot-unplug and race
for tasks in attaching cpusets
- Misc fixes including memory reclaim protection documentation and
selftest KTAP conformance
* tag 'cgroup-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: Treat cpusets in attaching as populated
sched/deadline: Walk up cpuset hierarchy to decide root domain when hot-unplug
cgroup/cpuset: Introduce cpuset_cpus_allowed_locked()
docs: cgroup: No special handling of unpopulated memcgs
docs: cgroup: Note about sibling relative reclaim protection
docs: cgroup: Explain reclaim protection target
selftests/cgroup: conform test to KTAP format output
cpuset: remove need_rebuild_sched_domains
cpuset: remove global remote_children list
cpuset: simplify node setting on error
cgroup: include missing header for struct irq_work
cgroup: Fix sleeping from invalid context warning on PREEMPT_RT
cgroup/cpuset: Globally track isolated_cpus update
cgroup/cpuset: Ensure domain isolated CPUs stay in root or isolated partition
cgroup/cpuset: Move up prstate_housekeeping_conflict() helper
cgroup/cpuset: Fail if isolated and nohz_full don't leave any housekeeping
cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks()
cgroup: Defer task cgroup unlink until after the task is done switching out
cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()
cgroup: Rename cgroup lifecycle hooks to cgroup_task_*()
...
|
|
Use tpm_ret_to_err() to transmute TPM return codes in trusted_tpm2.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Using -EFAULT as the tpm_ret_to_err() fallback error code causes makes it
incompatible on how trusted keys transmute TPM return codes.
Change the fallback as -EPERM in order to gain compatibility with trusted
keys. In addition, map TPM_RC_HASH to -EINVAL in order to be compatible
with tpm2_seal_trusted() return values.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_get_pcr_allocation() does not cap any upper limit for the number of
banks. Cap the limit to eight banks so that out of bounds values coming
from external I/O cause on only limited harm.
Cc: stable@vger.kernel.org # v5.10+
Fixes: bcfff8384f6c ("tpm: dynamically allocate the allocated_banks array")
Tested-by: Lai Yi <yi1.lai@linux.intel.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
|
|
tpm_find_get_ops() looks for the first valid TPM if the caller passes in
NULL. All internal users have been converted to either associate
themselves with a TPM directly, or call tpm_default_chip() as part of
their setup. Remove the no longer necessary tpm_find_get_ops().
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Update the kerneldoc parameter definitions for __crb_go_idle
and __crb_cmd_ready to include the loc parameter.
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The spelling of the word "requrest" is incorrect; it should be "request".
Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Remove parentheses around assert statements in Python. With parentheses,
assert always evaluates to True, making the checks ineffective.
Signed-off-by: Maurice Hieronymus <mhi@mailbox.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Pull workqueue updates from Tejun Heo:
- Rescuer affinity management: Affinity is now updated only when
detached using wq_unbound_cpumask consistently. DISASSOCIATED workers
also follow unbound cpumask changes to avoid breaking CPU isolation
- Rescuer cleanups preparing for fetching work items one by one from
pool list: Work assignment factored out, optimized to skip pwqs no
longer needing rescue, and shutdown logic simplified
- Unused assert_rcu_or_wq_mutex_or_pool_mutex() removed
* tag 'wq-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Don't rely on wq->rescuer to stop rescuer
workqueue: Only assign rescuer work when really needed
workqueue: Factor out assign_rescuer_work()
workqueue: Init rescuer's affinities as wq_unbound_cpumask
workqueue: Let DISASSOCIATED workers follow unbound wq cpumask changes
workqueue: Update the rescuer's affinity only when it is detached
workqueue: Remove unused assert_rcu_or_wq_mutex_or_pool_mutex
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull lkmm documentation update from Paul McKenney:
- Sort the memory-barriers.txt file's wait_event* and wait_on_bit* list
alphabetically
* tag 'lkmm.2025.12.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
memory-barriers.txt: Sort wait_event* and wait_on_bit* list alphabetically
|
|
- Use max() instead of max_t() to ease static analysis (David Laight)
- Add Manivannan Sadhasivam as PCI/pwrctrl maintainer (Bartosz Golaszewski)
* pci/misc:
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
PCI: Use max() instead of max_t() to ease static analysis
|
|
- Add a struct pci_ops.assert_perst() function pointer to assert/deassert
PCIe PERST# and implement it for the qcom driver (Krishna Chaitanya
Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe switch,
which must be held in reset after poweron so the pwrctrl driver can
configure the switch via I2C before bringing up the links (Krishna
Chaitanya Chundru)
* pci/pwrctrl-tc9563:
PCI: pwrctrl: Add power control driver for TC9563
PCI: qcom: Implement .assert_perst()
PCI: dwc: Implement .assert_perst() for dwc glue drivers
PCI: Add .assert_perst() to control PCIe PERST#
dt-bindings: PCI: Add binding for Toshiba TC9563 PCIe switch
|
|
- Fix a race between link training and endpoint register initialization
(Christian Bruel)
- Align endpoint allocations to match the ATU requirements (Christian
Bruel)
- Add #includes to avoid depending on 'proxy' headers (Andy Shevchenko)
* pci/controller/stm32:
PCI: stm32: Don't use 'proxy' headers
PCI: stm32: Fix EP page_size alignment
PCI: stm32: Fix LTSSM EP race with start link
|
|
- Add DT binding and driver for SpacemiT K1 (Alex Elder)
* pci/controller/spacemit-k1:
PCI: spacemit: Add SpacemiT PCIe host driver
dt-bindings: pci: spacemit: Introduce PCIe host controller
|
|
- Add module support for platform controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) (Manikandan K
Pillai)
- Add DT binding and driver for CIX Sky1 (Hans Zhang)
* pci/controller/sky1:
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
PCI: cadence: Move PCIe RP common functions to a separate file
PCI: cadence: Split PCIe controller header file
PCI: cadence: Add module support for platform controller driver
|
|
- Fix sg2042_pcie_remove() reference count issue (Christophe JAILLET)
* pci/controller/sg2042:
PCI: sg2042: Fix a reference count issue in sg2042_pcie_remove()
|
|
- Add NXP S32G host controller DT binding and driver (Vincent Guittot)
* pci/controller/s32g:
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
|
|
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu Beznea)
* pci/controller/rzg3s-host:
PCI: Add Renesas RZ/G3S host controller driver
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
|
|
- Drop ARM dependency so we can build test on other arches (Geert
Uytterhoeven)
* pci/controller/rcar-gen2:
PCI: rcar-gen2: Drop ARM dependency from PCI_RCAR_GEN2
|
|
- Look up OPP using both frequency and data rate (not just frequency) so
RPMh votes can account for both (Krishna Chaitanya Chundru)
* pci/controller/qcom:
PCI: qcom: Use frequency and level based OPP lookup
|
|
- Update DT binding to name DBI region "dbi", not "elbi", and update driver
to support both (Manivannan Sadhasivam)
* pci/controller/meson:
PCI: meson: Fix parsing the DBI register region
dt-bindings: PCI: amlogic: Fix the register name of the DBI region
|
|
- Convert DT binding to YAML schema (Christian Marangi)
- Add Airoha AN7583 DT compatible and driver support (Christian Marangi)
* pci/controller/mediatek:
PCI: mediatek: Add support for Airoha AN7583 SoC
PCI: mediatek: Use generic MACRO for TPVPERL delay
PCI: mediatek: Convert bool to single quirks entry and bitmap
dt-bindings: PCI: mediatek: Add support for Airoha AN7583
dt-bindings: PCI: mediatek: Convert to YAML schema
|
|
- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)
- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)
* pci/controller/keystone:
PCI: keystone: Add support to build as a loadable module
PCI: dwc: Export dw_pcie_allocate_domains() and dw_pcie_ep_raise_msix_irq()
PCI: Export pci_get_host_bridge_device() for use by pci-keystone
PCI: keystone: Exit ks_pcie_probe() for invalid mode
|
|
- Use devm_clk_get_optional_enabled() instead of open-coding
devm_clk_get_optional() and clk_prepare_enable() (Anand Moon)
* pci/controller/j721e:
PCI: j721e: Use 'pcie->reset_gpio' directly and drop the local variable
PCI: j721e: Use devm_clk_get_optional_enabled() to get and enable the clock
|
|
- Guard ARM32-specific hook_fault_code() with ifdefs so we can build test
on other arches (Bjorn Helgaas)
* pci/controller/ixp4xx:
PCI: ixp4xx: Guard ARM32-specific hook_fault_code()
|
|
- Use devm_regulator_get_enable_optional() to simplify probing (Anand Moon)
* pci/controller/dw-rockchip:
PCI: dw-rockchip: Simplify regulator setup with devm_regulator_get_enable_optional()
|
|
- Update PORT_LOGIC_LTSSM_STATE_MASK to be a 6-bit mask as per spec, not a
5-bit mask (Shawn Lin)
- Clear L1 PM Substate Capability 'Supported' bits unless glue driver says
it's supported, which prevents users from enabling non-working L1SS.
Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)
- Remove now-superfluous L1SS disable code from tegra194 (Bjorn Helgaas)
- Configure L1SS support in dw-rockchip when DT says 'supports-clkreq'
(Shawn Lin)
* pci/controller/dwc:
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
PCI: dwc: Advertise L1 PM Substates only if driver requests it
PCI: dwc: Fix wrong PORT_LOGIC_LTSSM_STATE_MASK definition
|
|
- Disable advertising ASPM L0s support correctly (Jim Quinlan)
- Add a panic/die handler to print diagnostic info in case PCIe caused an
unrecoverable abort (Jim Quinlan)
* pci/controller/brcmstb:
PCI: brcmstb: Add panic/die handler to driver
PCI: brcmstb: Add a way to indicate if PCIe bridge is active
PCI: brcmstb: Fix disabling L0s capability
|
|
- Move struct pci_host_bridge allocation from pci_host_common_init() to
callers, which significantly simplifies pcie-apple (Marc Zyngier)
* pci/controller/host-common:
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
|
|
- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)
- Add endpoint VNTB MSI doorbell support to reduce latency between host and
endpoint (Frank Li)
* pci/endpoint:
PCI: endpoint: pci-epf-vntb: Add MSI doorbell support
PCI: endpoint: Add pci_epf_assign_bar_space() API
PCI: endpoint: Add pci_epf_get_required_bar_size() helper
PCI: endpoint: Rename 'epf_bar::aligned_size' to 'epf_bar:mem_size'
PCI: endpoint: pci-epf-test: Fix sleeping function being called from atomic context
|
|
- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)
- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)
- Add 'contains' to the 'select' schema to enable the amlogic,axg-pcie
binding (Rob Herring)
- Update Manivannan Sadhasivam's email address in bindings (Manivannan
Sadhasivam)
- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT schemas
(Krzysztof Kozlowski)
* pci/dt-binding:
dt-bindings: PCI: qcom,pcie-x1e80100: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sm8550: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sm8450: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sm8350: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sm8250: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sm8150: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sc8280xp: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sc7280: Add missing required power-domains and resets
dt-bindings: PCI: qcom,pcie-sa8775p: Add missing required power-domains and resets
dt-bindings: PCI: Update the email address for Manivannan Sadhasivam
dt-bindings: PCI: amlogic,axg-pcie: Fix select schema
dt-bindings: PCI: qcom,pcie-sm8550: Add Kaanapali compatible
dt-bindings: PCI: dwc: rockchip: Add RK3528 variant
|
|
- Prevent resource tree corruption when BAR resize fails (Ilpo Järvinen)
- Restore BARs to the original size if a BAR resize fails (Ilpo Järvinen)
- Remove BAR release from BAR resize attempts by the xe, i915, and amdgpu
drivers so the PCI core can restore BARs if the resize fails (Ilpo
Järvinen)
- Move Resizable BAR code to rebar.c (Ilpo Järvinen)
- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo Järvinen)
- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo Järvinen)
* pci/resource:
PCI: Validate pci_rebar_size_supported() input
PCI: Convert BAR sizes bitmasks to u64
drm/amdgpu: Use pci_rebar_get_max_size()
drm/xe/vram: Use pci_rebar_get_max_size()
PCI: Add pci_rebar_get_max_size()
drm/xe/vram: Use PCI rebar helpers in resize_vram_bar()
drm/i915/gt: Use pci_rebar_size_supported()
PCI: Add pci_rebar_size_supported() helper
PCI: Improve Resizable BAR functions kernel doc
PCI: Move pci_rebar_size_to_bytes() and export it
PCI: Move pci_rebar_bytes_to_size() and clean it up
PCI: Move Resizable BAR code to rebar.c
PCI: Prevent restoring assigned resources
drm/amdgpu: Remove driver side BAR release before resize
drm/i915: Remove driver side BAR release before resize
drm/xe: Remove driver side BAR release before resize
PCI: Add kerneldoc for pci_resize_resource()
PCI: Fix restoring BARs on BAR resize rollback path
PCI: Free saved list without holding pci_bus_sem
PCI: Try BAR resize even when no window was released
PCI: Change pci_dev variable from 'bridge' to 'dev'
PCI/IOV: Adjust ->barsz[] when changing BAR size
PCI: Prevent resource tree corruption when BAR resize fails
|
|
- Enable PTM only if device advertises support for a relevant role, to
prevent invalid PTM Requests that cause ACS violations that are reported
as AER Uncorrectable Non-Fatal errors (Mika Westerberg)
* pci/ptm:
PCI/PTM: Enable only if device advertises relevant role
|
|
- For drivers using PCI legacy suspend, save config state at suspend so
that state (not any earlier state from enumeration, probe, or error
recovery) will be restored when resuming (Lukas Wunner)
- For devices with no driver or a driver that lacks PM, save config state
at hibernate so that state (not any earlier state from enumeration,
probe, or error recovery) will be restored when resuming (Lukas Wunner)
- Save device config space on device addition, before driver binding, so
error recovery works more reliably (Lukas Wunner)
- Drop pci_save_state() from several drivers that no longer need it since
the PCI core always does it and pci_restore_state() no longer invalidates
the saved state (Lukas Wunner)
- Document use of pci_save_state() by drivers to capture the state they
want restored during error recovery (Lukas Wunner)
* pci/err:
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
|
|
- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)
- Switch vmd from custom domain number allocator to the common allocator
(Dan Williams)
* pci/enumeration:
PCI: vmd: Switch to pci_bus_find_emul_domain_nr()
PCI: Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Properly handle SRCU readers within IRQ disabled sections in tiny
SRCU
- Preparation to reimplement RCU Tasks Trace on top of SRCU fast:
- Introduce API to expedite a grace period and test it through
rcutorture
- Split srcu-fast in two flavours: SRCU-fast and SRCU-fast-updown.
Both are still targeted toward faster readers (without full
barriers on LOCK and UNLOCK) at the expense of heavier write
side (using full RCU grace period ordering instead of simply
full ordering) as compared to "traditional" non-fast SRCU. But
those srcu-fast flavours are going to be optimized in two
different ways:
- SRCU-fast will become the reimplementation basis for
RCU-TASK-TRACE for consolidation. Since RCU-TASK-TRACE must
be NMI safe, SRCU-fast must be as well.
- SRCU-fast-updown will be needed for uretprobes code in order
to get rid of the read-side memory barriers while still
allowing entering the reader at task level while exiting it
in a timer handler. It is considered semaphore-like in that
it can have different owners between LOCK and UNLOCK.
However it is not NMI-safe.
The actual optimizations are work in progress for the next
cycle. Only the new interfaces are added for now, along with
related torture and scalability test code.
- Create/document/debug/torture new proper initializers for RCU fast:
DEFINE_SRCU_FAST() and init_srcu_struct_fast()
This allows for using right away the proper ordering on the write
side (either full ordering or full RCU grace period ordering)
without waiting for the read side to tell which to use.
This also optimizes the read side altogether with moving flavour
debug checks under debug config and with removing a costly RmW
operation on their first call.
- Make some diagnostic functions tracing safe
Refscale:
- Add performance testing for common context synchronizations
(Preemption, IRQ, Softirq) and per-cpu increments. Those are
relevant comparisons against SRCU-fast read side APIs, especially
as they are planned to synchronize further tracing fast-path code
Miscellanous:
- In order to prepare the layout for nohz_full work deferral to user
exit, the context tracking state must shrink the counter of
transitions to/from RCU not watching. The only possible hazard is
to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN
warnings. On recent discussions, we also concluded that all those
WRITE_ONCE() and READ_ONCE() on list APIs deserve appropriate
comments. Something to be expected for the next cycle
- Provide a script to apply several configs to several commits with
torture
- Allow torture to reuse a build directory in order to save needless
rebuild time
- Various cleanups"
* tag 'rcu.release.v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (29 commits)
refscale: Add SRCU-fast-updown readers
refscale: Exercise DEFINE_STATIC_SRCU_FAST() and init_srcu_struct_fast()
rcutorture: Make srcu{,d}_torture_init() announce the SRCU type
srcu: Create an SRCU-fast-updown API
refscale: Do not disable interrupts for tests involving local_bh_enable()
refscale: Add non-atomic per-CPU increment readers
refscale: Add this_cpu_inc() readers
refscale: Add preempt_disable() readers
refscale: Add local_bh_disable() readers
refscale: Add local_irq_disable() and local_irq_save() readers
torture: Permit negative kvm.sh --kconfig numberic arguments
srcu: Add SRCU_READ_FLAVOR_FAST_UPDOWN CPP macro
rcu: Mark diagnostic functions as notrace
rcutorture: Make TREE04 use CONFIG_RCU_DYNTICKS_TORTURE
rcutorture: Remove redundant rcutorture_one_extend() from rcu_torture_one_read()
rcutorture: Permit kvm-again.sh to re-use the build directory
torture: Add kvm-series.sh to test commit/scenario combination
rcu: use WRITE_ONCE() for ->next and ->pprev of hlist_nulls
locktorture: Fix memory leak in param_set_cpumask()
doc: Update for SRCU-fast definitions and initialization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- mempool_alloc_bulk() support for upcoming users in the block layer
that need to allocate multiple objects at once with the mempool's
guaranteed progress semantics, which is not achievable with an
allocation single objects in a loop. Along with refactoring and
various improvements (Christoph Hellwig)
- Preparations for the upcoming separation of struct slab from struct
page, mostly by removing the struct folio layer, as the purpose of
struct folio has shifted since it became used in slab code (Matthew
Wilcox)
- Modernisation of slab's boot param API usage, which removes some
unexpected parsing corner cases (Petr Tesarik)
- Refactoring of freelist_aba_t (now struct freelist_counters) and
associated functions for double cmpxchg, enabled by -fms-extensions
(Vlastimil Babka)
- Cleanups and improvements related to sheaves caching layer, that were
part of the full conversion to sheaves, which is planned for the next
release (Vlastimil Babka)
* tag 'slab-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (42 commits)
slab: Remove unnecessary call to compound_head() in alloc_from_pcs()
mempool: clarify behavior of mempool_alloc_preallocated()
mempool: drop the file name in the top of file comment
mempool: de-typedef
mempool: remove mempool_{init,create}_kvmalloc_pool
mempool: legitimize the io_schedule_timeout in mempool_alloc_from_pool
mempool: add mempool_{alloc,free}_bulk
mempool: factor out a mempool_alloc_from_pool helper
slab: Remove references to folios from virt_to_slab()
kasan: Remove references to folio in __kasan_mempool_poison_object()
memcg: Convert mem_cgroup_from_obj_folio() to mem_cgroup_from_obj_slab()
mempool: factor out a mempool_adjust_gfp helper
mempool: add error injection support
mempool: improve kerneldoc comments
mm: improve kerneldoc comments for __alloc_pages_bulk
fault-inject: make enum fault_flags available unconditionally
usercopy: Remove folio references from check_heap_object()
slab: Remove folio references from kfree_nolock()
slab: Remove folio references from kfree_rcu_sheaf()
slab: Remove folio references from build_detached_freelist()
...
|
|
Pull documentation updates from Jonathan Corbet:
"This has been another busy cycle for documentation, with a lot of
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules
that are imported by multiple programs. These modules have been
pulled together under tools/lib/python/ -- at least, for
documentation-related programs. There is other Python code in the
tree that might eventually want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer
used by default, and nobody has missed it, least of all anybody who
actually had to look at it.
- The docs build was controlled by a complex mess of makefilese that
few dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will
be far easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an
end to the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual"
* tag 'docs-6.19' of git://git.lwn.net/linux: (164 commits)
docs: makefile: move rustdoc check to the build wrapper
README: restructure with role-based documentation and guidelines
docs: kdoc: various fixes for grammar, spelling, punctuation
docs: kdoc_parser: use '@' for Excess enum value
docs: submitting-patches: Clarify that removal of Acks needs explanation too
docs: kdoc_parser: add data/function attributes to ignore
docs: MAINTAINERS: update Mauro's files/paths
docs/zh_CN: Add wd719x.rst translation
docs/zh_CN: Add libsas.rst translation
get_feat.pl: remove it, as it got replaced by get_feat.py
Documentation/sphinx/kernel_feat.py: use class directly
tools/docs/get_feat.py: convert get_feat.pl to Python
Documentation/admin-guide: fix typo and comment in cscope example
docs/zh_CN: Add data-integrity.rst translation
docs/zh_CN: Add blk-mq.rst translation
docs/zh_CN: Add block/index.rst translation
docs/zh_CN: Update the Chinese translation of kbuild.rst
docs: bring some order to our Python module hierarchy
docs: Move the python libraries to tools/lib/python
Documentation/kernel-parameters: Move the kernel build options
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
|
