| Age | Commit message (Collapse) | Author |
|---|
|
This commit introduces new internal bufmgr routines for marking shared
buffers as dirty:
* MarkDirtyUnpinnedBuffer()
* MarkDirtyRelUnpinnedBuffers()
* MarkDirtyAllUnpinnedBuffers()
These functions provide an efficient mechanism to respectively mark one
buffer, all the buffers of a relation, or the entire shared buffer pool
as dirty, something that can be useful to force patterns for the
checkpointer. MarkDirtyUnpinnedBufferInternal(), an extra routine, is
used by these three, to mark as dirty an unpinned buffer.
They are intended as developer tools to manipulate buffer dirtiness in
bulk, and will be used in a follow-up commit.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Aidar Imamov <a.imamov@postgrespro.ru>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Joseph Koshakow <koshy44@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ0h_YoSqqutxV6DES1RW8ig6wcA8CR9rJk358YRMxZFmw@mail.gmail.com
|
|
They were already using pg_attribute_aligned. This replaces that with
alignas and moves that into the required syntactic position. This
ends up making these three atomics implementations appear a bit more
consistent, but shouldn't change anything otherwise.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/46f05236-d4d4-4b4e-84d4-faa500f14691%40eisentraut.org
|
|
In v14, bb437f995 added support for scanning for ranges of TIDs using a
dedicated executor node for the purpose. Here, we allow these scans to
be parallelized. The range of blocks to scan is divvied up similarly to
how a Parallel Seq Scans does that, where 'chunks' of blocks are
allocated to each worker and the size of those chunks is slowly reduced
down to 1 block per worker by the time we're nearing the end of the
scan. Doing that means workers finish at roughly the same time.
Allowing TID Range Scans to be parallelized removes the dilemma from the
planner as to whether a Parallel Seq Scan will cost less than a
non-parallel TID Range Scan due to the CPU concurrency of the Seq Scan
(disk costs are not divided by the number of workers). It was possible
the planner could choose the Parallel Seq Scan which would result in
reading additional blocks during execution than the TID Scan would have.
Allowing Parallel TID Range Scans removes the trade-off the planner
makes when choosing between reduced CPU costs due to parallelism vs
additional I/O from the Parallel Seq Scan due to it scanning blocks from
outside of the required TID range. There is also, of course, the
traditional parallelism performance benefits to be gained as well, which
likely doesn't need to be explained here.
Author: Cary Huang <cary.huang@highgo.ca>
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Rafia Sabih <rafia.pghackers@gmail.com>
Reviewed-by: Steven Niu <niushiji@gmail.com>
Discussion: https://postgr.es/m/18f2c002a24.11bc2ab825151706.3749144144619388582@highgo.ca
|
|
This adds SupportRequestSimplifyAggref to allow pg_proc.prosupport
functions to receive an Aggref and allow them to determine if there is a
way that the Aggref call can be optimized.
Also added is a support function to allow transformation of COUNT(ANY)
into COUNT(*). This is possible to do when the given "ANY" cannot be
NULL and also that there are no ORDER BY / DISTINCT clauses within the
Aggref. This is a useful transformation to do as it is common that
people write COUNT(1), which until now has added unneeded overhead.
When counting a NOT NULL column. The overheads can be worse as that
might mean deforming more of the tuple, which for large fact tables may
be many columns in.
It may be possible to add prosupport functions for other aggregates. We
could consider if ORDER BY could be dropped for some calls, e.g. the
ORDER BY is quite useless in MAX(c ORDER BY c).
There is a little bit of passing fallout from adjusting
expr_is_nonnullable() to handle Const which results in a plan change in
the aggregates.out regression test. Previously, nothing was able to
determine that "One-Time Filter: (100 IS NOT NULL)" was always true,
therefore useless to include in the plan.
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/CAApHDvqGcPTagXpKfH=CrmHBqALpziThJEDs_MrPqjKVeDF9wA@mail.gmail.com
|
|
Useful for mapping a single codepoint at a time into a
statically-allocated buffer.
Discussion: https://postgr.es/m/450ceb6260cad30d7afdf155d991a9caafee7c0d.camel@j-davis.com
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
|
|
Discussion: https://postgr.es/m/450ceb6260cad30d7afdf155d991a9caafee7c0d.camel@j-davis.com
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
|
|
The code comment said, "It is expected that this routine will
eventually be replaced with the C99 hypot() function.", so let's do
that now.
This function is tested via the geometry regression test, so if it is
faulty on any platform, it will show up there.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/170308e6-a7a3-4484-87b2-f960bb564afa%40eisentraut.org
|
|
This patch adds two new columns to the pg_stat_replication_slots view:
slotsync_skip_count - the total number of times a slotsync operation was
skipped.
slotsync_skip_at - the timestamp of the most recent skip.
These additions provide better visibility into replication slot
synchronization behavior.
A future patch will introduce the slotsync_skip_reason column in
pg_replication_slots to capture the reason for skip.
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Ashutosh Sharma <ashu.coek88@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAE9k0PkhfKrTEAsGz4DjOhEj1nQ+hbQVfvWUxNacD38ibW3a1g@mail.gmail.com
|
|
This commit renames write_chunk and read_chunk to respectively
pgstat_write_chunk() and pgstat_read_chunk(), along with the *_s
convenience macros.
These are made available for plug-ins, so as any code that decides to
write and/or read stats data can rely on a single code path for this
work.
Extracted from a larger patch by the same author.
Author: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0s9SDOu+Z6veoJCHWk+kDeTktAtC-KY9fQ9Z6BJdDUirQ@mail.gmail.com
|
|
We've long had a practice of making views temporary by default if they
reference any temporary tables. However the implementation was pretty
incomplete, in that it only searched for RangeTblEntry references to
temp relations. Uses of temporary types, regclass constants, etc
were not detected even though the dependency mechanism considers them
grounds for dropping the view. Thus a view not believed to be temp
could silently go away at session exit anyhow.
To improve matters, replace the ad-hoc isQueryUsingTempRelation()
logic with use of the dependency-based infrastructure introduced by
commit 572c40ba9. This is complete by definition, and it's less code
overall.
While we're at it, we can also extend the warning NOTICE (or ERROR
in the case of a materialized view) to mention one of the temp
objects motivating the classification of the view as temp, as was
done for functions in 572c40ba9.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Discussion: https://postgr.es/m/19cf6ae1-04cd-422c-a760-d7e75fe6cba9@uni-muenster.de
|
|
Group the PG_PROTOCOL() codes, add a comment to AuthRequest now that the
AUTH_REQ codes live in a different header, and make some small
adjustments to spacing and comment style for the sake of scannability.
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CAOYmi%2B%3D6zg4oXXOQtifrVao_YKiujTDa3u6bxnU08r0FsSig4g%40mail.gmail.com
|
|
Commit 600086f47 added (several bespoke copies of) size_t addition with
overflow checks to libpq. Move this to common/int.h, along with
its subtraction and multiplication counterparts.
pg_neg_size_overflow() is intentionally omitted; I'm not sure we should
add SSIZE_MAX to win32_port.h for the sake of a function with no
callers.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAOYmi%2B%3D%2BpqUd2MUitvgW1pAJuXgG_TKCVc3_Ek7pe8z9nkf%2BAg%40mail.gmail.com
|
|
This replaces some uses of pg_attribute_aligned() with the standard
alignas() for cases where extended alignment (larger than max_align_t)
is required.
This patch stipulates that all supported compilers must support
alignments up to PG_IO_ALIGN_SIZE, but that seems pretty likely.
We can then also desupport the case where direct I/O is disabled
because pg_attribute_aligned is not supported.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/46f05236-d4d4-4b4e-84d4-faa500f14691%40eisentraut.org
|
|
The comment incorrectly indicated that indexcollations[] stored
collations for both key columns and INCLUDE columns, but in reality it
only has elements for the key columns. canreturn[] didn't get a mention,
so add that while we're here.
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAEG8a3LwbZgMKOQ9CmZarX5DEipKivdHp5PZMOO-riL0w%3DL%3D4A%40mail.gmail.com
Backpatch-through: 14
|
|
We don't have an official concept of temporary functions. (You can
make one explicitly in pg_temp, but then you have to explicitly
schema-qualify it on every call.) However, until now we were quite
laissez-faire about whether a non-temporary function could depend on
a temporary object, such as a temp table or view. If one does,
it will silently go away at end of session, due to the automatic
DROP ... CASCADE on the session's temporary objects. People have
complained that that's surprising; however, we can't really forbid
it because other people (including our own regression tests) rely
on being able to do it. Let's compromise by emitting a NOTICE
at CREATE FUNCTION time. This is somewhat comparable to our
ancient practice of emitting a NOTICE when forcing a view to
become temp because it depends on temp tables.
Along the way, refactor recordDependencyOnExpr() so that the
dependencies of an expression can be combined with other
dependencies, instead of being emitted separately and perhaps
duplicatively.
We should probably make the implementation of temp-by-default
views use the same infrastructure used here, but that's for
another patch. It's unclear whether there are any other object
classes that deserve similar treatment.
Author: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19cf6ae1-04cd-422c-a760-d7e75fe6cba9@uni-muenster.de
|
|
This request allows a support function to replace a function call
appearing in FROM (typically a set-returning function) with an
equivalent SELECT subquery. The subquery will then be subject
to the planner's usual optimizations, potentially allowing a much
better plan to be generated. While the planner has long done this
automatically for simple SQL-language functions, it's now possible
for extensions to do it for functions outside that group.
Notably, this could be useful for functions that are presently
implemented in PL/pgSQL and work by generating and then EXECUTE'ing
a SQL query.
Author: Paul A Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/09de6afa-c33d-4d94-a5cb-afc6cea0d2bb@illuminatedcomputing.com
|
|
The existing range_minus function raises an exception when the range is
"split", because then the result can't be represented by a single range.
For example '[0,10)'::int4range - '[4,5)' would be '[0,4)' and '[5,10)'.
This commit adds new set-returning functions so that callers can get
results even in the case of splits. There is no risk of an exception for
multiranges, but a set-returning function lets us handle them the same
way we handle ranges.
Both functions return zero results if the subtraction would give an
empty range/multirange.
The main use-case for these functions is to implement UPDATE/DELETE FOR
PORTION OF, which must compute the application-time of "temporal
leftovers": the part of history in an updated/deleted row that was not
changed. To preserve the untouched history, we will implicitly insert
one record for each result returned by range/multirange_minus_multi.
Using a set-returning function will also let us support user-defined
types for application-time update/delete in the future.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/ec498c3d-5f2b-48ec-b989-5561c8aa2024%40illuminatedcomputing.com
|
|
This changes a few union members that only existed to ensure
alignments and replaces them with the C11 alignas specifier.
This change only uses fundamental alignments (meaning approximately
alignments of basic types), which all C11 compilers must support.
There are opportunities for similar changes using extended alignments,
for example in PGIOAlignedBlock, but these are not necessarily
supported by all compilers, so they are kept as a separate change.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/46f05236-d4d4-4b4e-84d4-faa500f14691%40eisentraut.org
|
|
heap_page_prune_and_freeze() had accumulated an unwieldy number of input
parameters and upcoming work to handle VM updates in this function will
add even more.
Introduce a new PruneFreezeParams struct to group the function’s input
parameters, improving readability and maintainability.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Discussion: https://postgr.es/m/yn4zp35kkdsjx6wf47zcfmxgexxt4h2og47pvnw2x5ifyrs3qc%407uw6jyyxuyf7
|
|
This allows using the C11 constructs alignas and alignof (not done in
this patch).
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/46f05236-d4d4-4b4e-84d4-faa500f14691%40eisentraut.org
|
|
We need separate pairing heaps for different WaitLSNType's, because there
might be waiters for different LSN's at the same time. However, one process
can wait only for one type of LSN at a time. So, no need for inHeap
and heapNode fields to be arrays.
Discussion: https://postgr.es/m/CAPpHfdsBR-7sDtXFJ1qpJtKiohfGoj%3DvqzKVjWxtWsWidx7G_A%40mail.gmail.com
Author: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
|
|
This patch renames the sync_error_count column to sync_table_error_count
in the pg_stat_subscription_stats view. The new name makes the purpose
explicit now that a separate column exists to track sequence
synchronization errors.
Additionally, the column seq_sync_error_count is renamed to
sync_seq_error_count to maintain a consistent naming pattern, making it
easier for users to group, and query synchronization related counters.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CALDaNm3WwJmz=-4ybTkhniB-Nf3qmFG9Zx1uKjyLLoPF5NYYXA@mail.gmail.com
|
|
The existing format of pg_dependencies uses a single-object JSON
structure, with each key value embedding all the knowledge about the
set attributes tracked, like:
{"1 => 5": 1.000000, "5 => 1": 0.423130}
While this is a very compact format, it is confusing to read and it is
difficult to manipulate the values within the object, particularly when
tracking multiple attributes.
The new output format introduced in this commit is a JSON array of
objects, with:
- A key named "degree", with a float value.
- A key named "attributes", with an array of attribute numbers.
- A key named "dependency", with an attribute number.
The values use the same underlying type as previously when printed, with
a new output format that shows now as follows:
[{"degree": 1.000000, "attributes": [1], "dependency": 5},
{"degree": 0.423130, "attributes": [5], "dependency": 1}]
This new format will become handy for a follow-up set of changes, so as
it becomes possible to inject extended statistics rather than require an
ANALYZE, like in a dump/restore sequence or after pg_upgrade on a new
cluster.
This format has been suggested by Tomas Vondra. The key names are
defined in the header introduced by 1f927cce4498, to ease the
integration of frontend-specific changes that are still under
discussion. (Again a personal note: if anybody comes up with better
name for the keys, of course feel free.)
The bulk of the changes come from the regression tests, where
jsonb_pretty() is now used to make the outputs generated easier to
parse.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
|
|
The existing format of pg_ndistinct uses a single-object JSON structure
where each key is itself a comma-separated list of attnums, like:
{"3, 4": 11, "3, 6": 11, "4, 6": 11, "3, 4, 6": 11}
While this is a very compact format, it is confusing to read and it is
difficult to manipulate the values within the object.
The new output format introduced in this commit is an array of objects,
with:
- A key named "attributes", that contains an array of attribute numbers.
- A key named "ndistinct", represented as an integer.
The values use the same underlying type as previously when printed, with
a new output format that shows now as follows:
[{"ndistinct": 11, "attributes": [3,4]},
{"ndistinct": 11, "attributes": [3,6]},
{"ndistinct": 11, "attributes": [4,6]},
{"ndistinct": 11, "attributes": [3,4,6]}]
This new format will become handy for a follow-up set of changes, so as
it becomes possible to inject extended statistics rather than require an
ANALYZE, like in a dump/restore sequence or after pg_upgrade on a new
cluster.
This format has been suggested by Tomas Vondra. The key names are
defined in a new header, to ease with the integration of
frontend-specific changes that are still under discussion. (Personal
note: I am not specifically wedded to these key names, but if there are
better name suggestions for this release, feel free.)
The bulk of the changes come from the regression tests, where
jsonb_pretty() is now used to make the outputs generated easier to
parse.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CADkLM=dpz3KFnqP-dgJ-zvRvtjsa8UZv8wDAQdqho=qN3kX0Zg@mail.gmail.com
|
|
Likewise for MemSetAligned.
"long" wasn't the most suitable type for these macros as with MSVC in
64-bit builds, sizeof(long) == 4, which is narrower than the processor's
word size, therefore these macros had to perform twice as many loops as
they otherwise might.
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CAApHDvoGFjSA3aNyVQ3ivbyc4ST=CC5L-_VjEUQ92HbE2Cxovg@mail.gmail.com
|
|
"long" is 32 bits on Windows 64-bit. Switch to a datatype that's 64-bit
on all platforms. While we're there, use an unsigned type as these
fields count things that have occurred, of which it's not possible to
have negative numbers of.
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CAApHDvoGFjSA3aNyVQ3ivbyc4ST=CC5L-_VjEUQ92HbE2Cxovg@mail.gmail.com
|
|
Update comments to reference WaitForLSN() instead of the outdated
WaitForLSNReplay() function name.
Discussion: https://postgr.es/m/CABPTF7UieOYbOgH3EnQCasaqcT1T4N6V2wammwrWCohQTnD_Lw%40mail.gmail.com
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
|
|
PostgreSQL's Windows port has never been able to handle files larger
than 2GB due to the use of off_t for file offsets, only 32-bit on
Windows. This causes signed integer overflow at exactly 2^31 bytes when
trying to handle files larger than 2GB, for the routines touched by this
commit.
Note that large files are forbidden by ./configure (3c6248a828af) and
meson (recent change, see 79cd66f28c65). This restriction also exists
in v16 and older versions for the now-dead MSVC scripts.
The code base already defines pgoff_t as __int64 (64-bit) on Windows for
this purpose, and some function declarations in headers use it, but many
internals still rely on off_t. This commit switches more routines to
use pgoff_t, offering more portability, for areas mainly related to file
extensions and storage.
These are not critical for WAL segments yet, which have currently a
maximum size allowed of 1GB (well, this opens the door at allowing a
larger size for them). This matters more for segment files if we want
to lift the large file restriction in ./configure and meson in the
future, which would make sense to remove once/if all traces of off_t are
gone from the tree. This can additionally matter for out-of-core code
that may want files larger than 2GB in places where off_t is four bytes
in size.
Note that off_t is still used in other parts of the tree like
buffile.c, WAL sender/receiver, base backup, pg_combinebackup, etc.
These other code paths can be addressed separately, and their update
will be required if we want to remove the large file restriction in the
future. This commit is a good first cut in itself towards more
portability, hopefully.
On Unix-like systems, pgoff_t is defined as off_t, so this change only
affects Windows behavior.
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/0f238ff4-c442-42f5-adb8-01b762c94ca1@gmail.com
|
|
The async notification queue contains the XID of the sender, and when
processing notifications we call TransactionIdDidCommit() on the
XID. But we had no safeguards to prevent the CLOG segments containing
those XIDs from being truncated away. As a result, if a backend didn't
for some reason process its notifications for a long time, or when a
new backend issued LISTEN, you could get an error like:
test=# listen c21;
ERROR: 58P01: could not access status of transaction 14279685
DETAIL: Could not open file "pg_xact/000D": No such file or directory.
LOCATION: SlruReportIOError, slru.c:1087
To fix, make VACUUM "freeze" the XIDs in the async notification queue
before truncating the CLOG. Old XIDs are replaced with
FrozenTransactionId or InvalidTransactionId.
Note: This commit is not a full fix. A race condition remains, where a
backend is executing asyncQueueReadAllNotifications() and has just
made a local copy of an async SLRU page which contains old XIDs, while
vacuum concurrently truncates the CLOG covering those XIDs. When the
backend then calls TransactionIdDidCommit() on those XIDs from the
local copy, you still get the error. The next commit will fix that
remaining race condition.
This was first reported by Sergey Zhuravlev in 2021, with many other
people hitting the same issue later. Thanks to:
- Alexandra Wang, Daniil Davydov, Andrei Varashen and Jacques Combrink
for investigating and providing reproducable test cases,
- Matheus Alcantara and Arseniy Mukhin for review and earlier proposed
patches to fix this,
- Álvaro Herrera and Masahiko Sawada for reviews,
- Yura Sokolov aka funny-falcon for the idea of marking transactions
as committed in the notification queue, and
- Joel Jacobson for the final patch version. I hope I didn't forget
anyone.
Backpatch to all supported versions. I believe the bug goes back all
the way to commit d1e027221d, which introduced the SLRU-based async
notification queue.
Discussion: https://www.postgresql.org/message-id/16961-25f29f95b3604a8a@postgresql.org
Discussion: https://www.postgresql.org/message-id/18804-bccbbde5e77a68c2@postgresql.org
Discussion: https://www.postgresql.org/message-id/CAK98qZ3wZLE-RZJN_Y%2BTFjiTRPPFPBwNBpBi5K5CU8hUHkzDpw@mail.gmail.com
Backpatch-through: 14
|
|
This creates a src/backend/catalog/pg_tablespace.c supporting file
containing a new function get_tablespace_location(), which lets the code
underlying pg_tablespace_location() be reused for other purposes.
Author: Manni Wood <manni.wood@enterprisedb.com>
Author: Nishant Sharma <nishant.sharma@enterprisedb.com>
Reviewed-by: Vaibhav Dalvi <vaibhav.dalvi@enterprisedb.com>
Reviewed-by: Ian Lawrence Barwick <barwick@gmail.com>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CAKWEB6rmnmGKUA87Zmq-s=b3Scsnj02C0kObQjnbL2ajfPWGEw@mail.gmail.com
|
|
guc_var_compare() is invoked from qsort() on an array of struct
config_generic, but the function accesses these directly as
strings (char *). This relies on the name being the first field, so
this works. But we can write this more clearly by using the struct
and then accessing the field through the struct. Before the
reorganization of the GUC structs (commit a13833c35f9), the old code
was probably more convenient, but now we can write this more clearly
and correctly.
After this change, it is no longer required that the name is the first
field in struct config_generic, so remove that comment.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/2c961fa1-14f6-44a2-985c-e30b95654e8d%40eisentraut.org
|
|
Commit 3e0ae46d90 added a field to ControlFileData and bumped
CATALOG_VERSION_NO, but CATALOG_VERSION_NO is not the right version
number for ControlFileData changes. Bumping either one will force an
initdb, but PG_CONTROL_VERSION is more accurate. Bump
PG_CONTROL_VERSION now.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/1874404.1762787779@sss.pgh.pa.us
|
|
This omission allowed table owners to create statistics in any
schema, potentially leading to unexpected naming conflicts. For
ALTER TABLE commands that require re-creating statistics objects,
skip this check in case the user has since lost CREATE on the
schema. The addition of a second parameter to CreateStatistics()
breaks ABI compatibility, but we are unaware of any impacted
third-party code.
Reported-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Security: CVE-2025-12817
Backpatch-through: 13
|
|
It seems plausible that someone might want to experiment with
different values. The pressing reason though is that I'm reviewing a
patch that requires pg_upgrade to manipulate SLRU files. That patch
needs to access SLRU_PAGES_PER_SEGMENT from pg_upgrade code, and
slru.h, where SLRU_PAGES_PER_SEGMENT is currently defined, cannot be
included from frontend code. Moving it to pg_config_manual.h makes it
accessible.
Now that it's a little more likely that someone might change
SLRU_PAGES_PER_SEGMENT, add a cluster compatibility check for it.
Bump catalog version because of the new field in the control file.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://www.postgresql.org/message-id/c7a4ea90-9f7b-4953-81be-b3fcb47db057@iki.fi
|
|
generic-gcc.h maps our read and write barriers to C11 acquire and
release fences using compiler builtins, for platforms where we don't
have our own hand-rolled assembler. This is apparently enough for GCC,
but the C11 memory model is only defined in terms of atomic accesses,
and our barriers for non-atomic, non-volatile accesses were not always
respected under Clang's stricter interpretation of the standard.
This explains the occasional breakage observed on new RISC-V + Clang
animal greenfly in lock-free PgAioHandle manipulation code containing a
repeating pattern of loads and read barriers. The problem can also be
observed in code generated for MIPS and LoongAarch, though we aren't
currently testing those with Clang, and on x86, though we use our own
assembler there. The scariest aspect is that we use the generic version
on very common ARM systems, but it doesn't seem to reorder the relevant
code there (or we'd have debugged this long ago).
Fix by inserting an explicit compiler barrier. It expands to an empty
assembler block declared to have memory side-effects, so registers are
flushed and reordering is prevented. In those respects this is like the
architecture-specific assembler versions, but the compiler is still in
charge of generating the appropriate fence instruction. Done for write
barriers on principle, though concrete problems have only been observed
with read barriers.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Tested-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/d79691be-22bd-457d-9d90-18033b78c40a%40gmail.com
Backpatch-through: 13
|
|
This commit adds a new column, seq_sync_error_count, to the
pg_stat_subscription_stats view. This counter tracks the number of errors
encountered by the sequence synchronization worker during operation.
Since a single worker handles the synchronization of all sequences, this
value may reflect errors from multiple sequences. This addition improves
observability of sequence synchronization behavior and helps monitor
potential issues during replication.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
|
|
Until now BufferDesc.state was not allowed to be modified while the buffer
header spinlock was held. This meant that operations like unpinning buffers
needed to use a CAS loop, waiting for the buffer header spinlock to be
released before updating.
The benefit of that restriction is that it allowed us to unlock the buffer
header spinlock with just a write barrier and an unlocked write (instead of a
full atomic operation). That was important to avoid regressions in
48354581a49c. However, since then the hottest buffer header spinlock uses have
been replaced with atomic operations (in particular, the most common use of
PinBuffer_Locked(), in GetVictimBuffer() (formerly in BufferAlloc()), has been
removed in 5e899859287).
This change will allow, in a subsequent commit, to release buffer pins with a
single atomic-sub operation. This previously was not possible while such
operations were not allowed while the buffer header spinlock was held, as an
atomic-sub would not have allowed a race-free check for the buffer header lock
being held.
Using atomic-sub to unpin buffers is a nice scalability win, however it is not
the primary motivation for this change (although it would be sufficient). The
primary motivation is that we would like to merge the buffer content lock into
BufferDesc.state, which will result in more frequent changes of the state
variable, which in some situations can cause a performance regression, due to
an increased CAS failure rate when unpinning buffers. The regression entirely
vanishes when using atomic-sub.
Naively implementing this would require putting CAS loops in every place
modifying the buffer state while holding the buffer header lock. To avoid
that, introduce UnlockBufHdrExt(), which can set/add flags as well as the
refcount, together with releasing the lock.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/fvfmkr5kk4nyex56ejgxj3uzi63isfxovp2biecb4bspbjrze7@az2pljabhnff
|
|
XLogRecPtrIsInvalid() is inconsistent with the affirmative form of
macros used for other datatypes, and leads to awkward double negatives
in a few places. This commit introduces XLogRecPtrIsValid(), which
allows code to be written more naturally.
This patch only adds the new macro. XLogRecPtrIsInvalid() is left in
place, and all existing callers remain untouched. This means all
supported branches can accept hypothetical bug fixes that use the new
macro, and at the same time any code that compiled with the original
formulation will continue to silently compile just fine.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/aQB7EvGqrbZXrMlg@ip-10-97-1-34.eu-west-3.compute.internal
|
|
Before commit e25626677f, spinlocks were implemented using semaphores
on some platforms (--disable-spinlocks). That made it necessary to
initialize semaphores early, before any spinlocks could be used. Now
that we don't support --disable-spinlocks anymore, we can allocate the
shared memory needed for semaphores the same way as other shared
memory structures. Since the semaphores are used only in the PGPROC
array, move the semaphore shmem size estimation and initialization
calls to ProcGlobalShmemSize() and InitProcGlobal().
Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/CAExHW5seSZpPx-znjidVZNzdagGHOk06F+Ds88MpPUbxd1kTaA@mail.gmail.com
|
|
Some of the changes in pg_config.h.in from commit 3853a6956c3 didn't
match the order that a fresh run would produce.
|
|
WAIT FOR is to be used on standby and specifies waiting for
the specific WAL location to be replayed. This option is useful when
the user makes some data changes on primary and needs a guarantee to see
these changes are on standby.
WAIT FOR needs to wait without any snapshot held. Otherwise, the snapshot
could prevent the replay of WAL records, implying a kind of self-deadlock.
This is why separate utility command seems appears to be the most robust
way to implement this functionality. It's not possible to implement this as
a function. Previous experience shows that stored procedures also have
limitation in this aspect.
Discussion: https://www.postgresql.org/message-id/flat/CAPpHfdsjtZLVzxjGT8rJHCYbM0D5dwkO+BBjcirozJ6nYbOW8Q@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/flat/CABPTF7UNft368x-RgOXkfj475OwEbp%2BVVO-wEXz7StgjD_%3D6sw%40mail.gmail.com
Author: Kartyshov Ivan <i.kartyshov@postgrespro.ru>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
|
|
Implement a new facility that allows processes to wait for WAL to reach
specific LSNs, both on primary (waiting for flush) and standby (waiting
for replay) servers.
The implementation uses shared memory with per-backend information
organized into pairing heaps, allowing O(1) access to the minimum
waited LSN. This enables fast-path checks: after replaying or flushing
WAL, the startup process or WAL writer can quickly determine if any
waiters need to be awakened.
Key components:
- New xlogwait.c/h module with WaitForLSNReplay() and WaitForLSNFlush()
- Separate pairing heaps for replay and flush waiters
- WaitLSN lightweight lock for coordinating shared state
- Wait events WAIT_FOR_WAL_REPLAY and WAIT_FOR_WAL_FLUSH for monitoring
This infrastructure can be used by features that need to wait for WAL
operations to complete.
Discussion: https://www.postgresql.org/message-id/flat/CAPpHfdsjtZLVzxjGT8rJHCYbM0D5dwkO+BBjcirozJ6nYbOW8Q@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/flat/CABPTF7UNft368x-RgOXkfj475OwEbp%2BVVO-wEXz7StgjD_%3D6sw%40mail.gmail.com
Author: Kartyshov Ivan <i.kartyshov@postgrespro.ru>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
|
|
The existing pairingheap_allocate() uses palloc(), which allocates
from process-local memory. For shared memory use cases, the pairingheap
structure must be allocated via ShmemAlloc() or embedded in a shared
memory struct. Add pairingheap_initialize() to initialize an already-
allocated pairingheap structure in-place, enabling shared memory usage.
Discussion: https://www.postgresql.org/message-id/flat/CAPpHfdsjtZLVzxjGT8rJHCYbM0D5dwkO+BBjcirozJ6nYbOW8Q@mail.gmail.com
Discussion: https://www.postgresql.org/message-id/flat/CABPTF7UNft368x-RgOXkfj475OwEbp%2BVVO-wEXz7StgjD_%3D6sw%40mail.gmail.com
Author: Kartyshov Ivan <i.kartyshov@postgrespro.ru>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
|
|
This patch introduces sequence synchronization. Sequences that are synced
will have 2 states:
- INIT (needs [re]synchronizing)
- READY (is already synchronized)
A new sequencesync worker is launched as needed to synchronize sequences.
A single sequencesync worker is responsible for synchronizing all
sequences. It begins by retrieving the list of sequences that are flagged
for synchronization, i.e., those in the INIT state. These sequences are
then processed in batches, allowing multiple entries to be synchronized
within a single transaction. The worker fetches the current sequence
values and page LSNs from the remote publisher, updates the corresponding
sequences on the local subscriber, and finally marks each sequence as
READY upon successful synchronization.
Sequence synchronization occurs in 3 places:
1) CREATE SUBSCRIPTION
- The command syntax remains unchanged.
- The subscriber retrieves sequences associated with publications.
- Published sequences are added to pg_subscription_rel with INIT
state.
- Initiate the sequencesync worker to synchronize all sequences.
2) ALTER SUBSCRIPTION ... REFRESH PUBLICATION
- The command syntax remains unchanged.
- Dropped published sequences are removed from pg_subscription_rel.
- Newly published sequences are added to pg_subscription_rel with INIT
state.
- Initiate the sequencesync worker to synchronize only newly added
sequences.
3) ALTER SUBSCRIPTION ... REFRESH SEQUENCES
- A new command introduced for PG19 by f0b3573c3a.
- All sequences in pg_subscription_rel are reset to INIT state.
- Initiate the sequencesync worker to synchronize all sequences.
- Unlike "ALTER SUBSCRIPTION ... REFRESH PUBLICATION" command,
addition and removal of missing sequences will not be done in this
case.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
|
|
This has come up as useful as an alternative of WalRcvStreaming(), to be
able to do sanity checks based on the state of a WAL receiver. This
will be used in a follow-up commit.
Author: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/19093-c4fff49a608f82a0@postgresql.org
|
|
Commit b4f584f9d2a1 (affecting v15~, later backpatched down to 13 as of
3635a0a35aaf) introduced an unconditional WAL receiver shutdown when
switching from streaming to archive WAL sources. This causes problems
during a timeline switch, when a WAL receiver enters WALRCV_WAITING
state but remains alive, waiting for instructions.
The unconditional shutdown can break some monitoring scenarios as the
WAL receiver gets repeatedly terminated and re-spawned, causing
pg_stat_wal_receiver.status to show a "streaming" instead of "waiting"
status, masking the fact that the WAL receiver is waiting for a new TLI
and a new LSN to be able to continue streaming.
This commit changes the WAL receiver behavior so as the shutdown becomes
conditional, with InstallXLogFileSegmentActive being always reset to
prevent the regression fixed by b4f584f9d2a1: only terminate the WAL
receiver when it is actively streaming (WALRCV_STREAMING,
WALRCV_STARTING, or WALRCV_RESTARTING). When in WALRCV_WAITING state,
just reset InstallXLogFileSegmentActive flag to allow archive
restoration without killing the process. WALRCV_STOPPED and
WALRCV_STOPPING are not reachable states in this code path. For the
latter, the startup process is the one in charge of setting
WALRCV_STOPPING via ShutdownWalRcv(), waiting for the WAL receiver to
reach a WALRCV_STOPPED state after switching walRcvState, so
WaitForWALToBecomeAvailable() cannot be reached while a WAL receiver is
in a WALRCV_STOPPING state.
A regression test is added to check that a WAL receiver is not stopped
on timeline jump, that fails when the fix of this commit is reverted.
Reported-by: Ryan Bird <ryanzxg@gmail.com>
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/19093-c4fff49a608f82a0@postgresql.org
Backpatch-through: 13
|
|
New \pset variables display_true and display_false allow the user to
change how true and false values are displayed.
Author: David G. Johnston <David.G.Johnston@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/CAKFQuwYts3vnfQ5AoKhEaKMTNMfJ443MW2kFswKwzn7fiofkrw@mail.gmail.com
Discussion: https://postgr.es/m/56308F56.8060908@joh.to
|
|
We've been nibbling away at removing uses of "long" for a long time,
since its width is platform-dependent. Here's one more: change the
remaining "long" fields in Plan nodes to Cardinality, since the three
surviving examples all represent group-count estimates. The upstream
planner code was converted to Cardinality some time ago; for example
the corresponding fields in Path nodes are type Cardinality, as are
the arguments of the make_foo_path functions. Downstream in the
executor, it turns out that these all feed to the table-size argument
of BuildTupleHashTable. Change that to "double" as well, and fix it
so that it safely clamps out-of-range values to the uint32 limit of
simplehash.h, as was not being done before.
Essentially, this is removing all the artificial datatype-dependent
limitations on these values from upstream processing, and applying
just one clamp at the moment where we're forced to do so by the
datatype choices of simplehash.h.
Also, remove BuildTupleHashTable's misguided attempt to enforce
work_mem/hash_mem_limit. It doesn't have enough information
(particularly not the expected tuple width) to do that accurately,
and it has no real business second-guessing the caller's choice.
For all these plan types, it's really the planner's responsibility
to not choose a hashed implementation if the hashtable is expected
to exceed hash_mem_limit. The previous patch improved the
accuracy of those estimates, and even if BuildTupleHashTable had
more information it should arrive at the same conclusions.
Reported-by: Jeff Janes <jeff.janes@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAMkU=1zia0JfW_QR8L5xA2vpa0oqVuiapm78h=WpNsHH13_9uw@mail.gmail.com
|
|
For several types of plan nodes that use TupleHashTables, the
planner estimated the expected size of the table as basically
numEntries * (MAXALIGN(dataWidth) + MAXALIGN(SizeofHeapTupleHeader)).
This is pretty far off, especially for small data widths, because
it doesn't account for the overhead of the simplehash.h hash table
nor for any per-tuple "additional space" the plan node may request.
Jeff Janes noted a case where the estimate was off by about a factor
of three, even though the obvious hazards such as inaccurate estimates
of numEntries or dataWidth didn't apply.
To improve matters, create functions provided by the relevant executor
modules that can estimate the required sizes with reasonable accuracy.
(We're still not accounting for effects like allocator padding, but
this at least gets the first-order effects correct.)
I added functions that can estimate the tuple table sizes for
nodeSetOp and nodeSubplan; these rely on an estimator for
TupleHashTables in general, and that in turn relies on one for
simplehash.h hash tables. That feels like kind of a lot of mechanism,
but if we take any short-cuts we're violating modularity boundaries.
The other places that use TupleHashTables are nodeAgg, which took
pains to get its numbers right already, and nodeRecursiveunion.
I did not try to improve the situation for nodeRecursiveunion because
there's nothing to improve: we are not making an estimate of the hash
table size, and it wouldn't help us to do so because we have no
non-hashed alternative implementation. On top of that, our estimate
of the number of entries to be hashed in that module is so suspect
that we'd likely often choose the wrong implementation if we did have
two ways to do it.
Reported-by: Jeff Janes <jeff.janes@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAMkU=1zia0JfW_QR8L5xA2vpa0oqVuiapm78h=WpNsHH13_9uw@mail.gmail.com
|
|
The C standard says that the second and third arguments of a
conditional operator shall be both void type or both not-void
type. The Windows version of INTERRUPTS_PENDING_CONDITION()
got this wrong. It's pretty harmless because the result of
the operator is ignored anyway, but apparently recent versions
of MSVC have started issuing a warning about it. Silence the
warning by casting the dummy zero to void.
Reported-by: Christian Ullrich <chris@chrullrich.net>
Author: Bryan Green <dbryan.green@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/cc4ef8db-f8dc-4347-8a22-e7ebf44c0308@chrullrich.net
Backpatch-through: 13
|
