| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
misplacements
Add a test case for a bug fixed by Jamal [1] and for scenario where an
ets drr class is inserted into the active list twice.
- Try to delete ets drr class' qdisc while still keeping it in the
active list
- Try to add ets class to the active list twice
[1] https://lore.kernel.org/netdev/20251128151919.576920-1-jhs@mojatatu.com/
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251208190125.1868423-2-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
1) Fix refcount leaks in nf_conncount, from Fernando Fernandez Mancera.
This addresses a recent regression that came in the last -next
pull request.
2) Fix a null dereference in route error handling in IPVS, from Slavin
Liu. This is an ancient issue dating back to 5.1 days.
3) Always set ifindex in route tuple in the flowtable output path, from
Lorenzo Bianconi. This bug came in with the recent output path refactoring.
4) Prefer 'exit $ksft_xfail' over 'exit $ksft_skip' when we fail to
trigger a nat race condition to exercise the clash resolution path in
selftest infra, $ksft_skip should be reserved for missing tooling,
From myself.
* tag 'nf-25-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: prefer xfail in case race wasn't triggered
netfilter: always set route tuple out ifindex
ipvs: fix ipv4 null-ptr-deref in route error path
netfilter: nf_conncount: fix leaked ct in error paths
====================
Link: https://patch.msgid.link/20251210110754.22620-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After fixing traffic matching in the previous patch, the test does not need
to use the sleep anymore. So drop vx_wait() altogether, migrate all callers
of vx{10,20}_create_wait() to the corresponding _create(), and drop the now
unused _create_wait() helpers.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/eabfe4fa12ae788cf3b8c5c876a989de81dfc3d3.1765289566.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test runs an overlay traffic, forwarded over a multicast-routed VXLAN
underlay. In order to determine whether packets reach their intended
destination, it uses a TC match. For convenience, it uses a flower match,
which however does not allow matching on the encapsulated packet. So
various service traffic ends up being indistinguishable from the test
packets, and ends up confusing the test. To alleviate the problem, the test
uses sleep to allow the necessary service traffic to run and clear the
channel, before running the test traffic. This worked for a while, but
lately we have nevertheless seen flakiness of the test in the CI.
Fix the issue by using u32 to match the encapsulated packet as well. The
confusing packets seem to always be IPv6 multicast listener reports.
Realistically they could be ARP or other ICMP6 traffic as well. Therefore
look for ethertype IPv4 in the IPv4 traffic test, and for IPv6 / UDP
combination in the IPv6 traffic test.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/6438cb1613a2a667d3ff64089eb5994778f247af.1765289566.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Flower is commonly used to match on packets in many bash-based selftests.
A dump of a flower filter including statistics looks something like this:
[
{
"protocol": "all",
"pref": 49152,
"kind": "flower",
"chain": 0
},
{
...
"options": {
...
"actions": [
{
...
"stats": {
"bytes": 0,
"packets": 0,
"drops": 0,
"overlimits": 0,
"requeues": 0,
"backlog": 0,
"qlen": 0
}
}
]
}
}
]
The JQ query in the helper function tc_rule_stats_get() assumes this form
and looks for the second element of the array.
However, a dump of a u32 filter looks like this:
[
{
"protocol": "all",
"pref": 49151,
"kind": "u32",
"chain": 0
},
{
"protocol": "all",
"pref": 49151,
"kind": "u32",
"chain": 0,
"options": {
"fh": "800:",
"ht_divisor": 1
}
},
{
...
"options": {
...
"actions": [
{
...
"stats": {
"bytes": 0,
"packets": 0,
"drops": 0,
"overlimits": 0,
"requeues": 0,
"backlog": 0,
"qlen": 0
}
}
]
}
},
]
There's an extra element which the JQ query ends up choosing.
Instead of hard-coding a particular index, look for the entry on which a
selector .options.actions yields anything.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/12982a44471c834511a0ee6c1e8f57e3a5307105.1765289566.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub says: "We try to reserve SKIP for tests skipped because tool is
missing in env, something isn't built into the kernel etc."
use xfail, we can't force the race condition to appear at will
so its expected that the test 'fails' occasionally.
Fixes: 78a588363587 ("selftests: netfilter: add conntrack clash resolution test case")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251206175647.5c32f419@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Fix
tfo.c: In function ‘run_server’:
tfo.c:84:9: warning: ignoring return value of ‘read’ declared with attribute ‘warn_unused_result’
by evaluating the return value from read() and displaying an error message
if it reports an error.
Fixes: c65b5bb2329e3 ("selftests: net: add passive TFO test binary")
Cc: David Wei <dw@davidwei.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251205171010.515236-14-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix
ksft.h: In function ‘ksft_ready’:
ksft.h:27:9: warning: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’
ksft.h: In function ‘ksft_wait’:
ksft.h:51:9: warning: ignoring return value of ‘read’ declared with attribute ‘warn_unused_result’
by checking the return value of the affected functions and displaying
an error message if an error is seen.
Fixes: 2b6d490b82668 ("selftests: drv-net: Factor out ksft C helpers")
Cc: Joe Damato <jdamato@fastly.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251205171010.515236-11-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
support
Fix:
gcc: error: unrecognized command-line option ‘-Wflex-array-member-not-at-end’
by making the compiler option dependent on its support.
Fixes: 1838731f1072c ("selftest: af_unix: Add -Wall and -Wflex-array-member-not-at-end to CFLAGS.")
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251205171010.515236-7-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In 'poll_partial_rec_async' a uninitialized char variable 'token' with
is used for write/read instruction to synchronize between threads
via a pipe.
tls.c:2833:26: warning: variable 'token' is uninitialized
when passed as a const pointer argument
Initialize 'token' to '\0' to silence compiler warning.
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Link: https://patch.msgid.link/20251205163242.14615-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This validates the previous commit: the userspace can set unknown flags
-- the 7th bit is currently unused -- without errors, but only the
supported ones are printed in the endpoints dumps.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251205-net-mptcp-misc-fixes-6-19-rc1-v1-2-9e4781a6c1b8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The wireguard YNL conversion was missing the customary .deps entry.
NIPA doesn't catch this but my CentOS 9 system complains:
wireguard-user.c:72:10: error: ‘WGALLOWEDIP_A_FLAGS’ undeclared here
wireguard-user.c:58:67: error: parameter 1 (‘value’) has incomplete type
58 | const char *wireguard_wgallowedip_flags_str(enum wgallowedip_flag value)
| ~~~~~~~~~~~~~~~~~~~~~~^~~~~
And similarly does Ubuntu 22.04.
One extra complication here is that we renamed the header guard,
so we need to compat with both old and new guard define.
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20251207013848.1692990-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to
test_progs runner (Alexis Lothoré)
- Convert selftests/bpf/test_xsk to test_progs runner (Bastien
Curutchet)
- Replace bpf memory allocator with kmalloc_nolock() in
bpf_local_storage (Amery Hung), and in bpf streams and range tree
(Puranjay Mohan)
- Introduce support for indirect jumps in BPF verifier and x86 JIT
(Anton Protopopov) and arm64 JIT (Puranjay Mohan)
- Remove runqslower bpf tool (Hoyeon Lee)
- Fix corner cases in the verifier to close several syzbot reports
(Eduard Zingerman, KaFai Wan)
- Several improvements in deadlock detection in rqspinlock (Kumar
Kartikeya Dwivedi)
- Implement "jmp" mode for BPF trampoline and corresponding
DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance
from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong)
- Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul
Chaignon)
- Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel
Borkmann)
- Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko)
- Optimize bpf_map_update_elem() for map-in-map types (Ritesh
Oedayrajsingh Varma)
- Introduce overwrite mode for BPF ring buffer (Xu Kuohai)
* tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits)
bpf: optimize bpf_map_update_elem() for map-in-map types
bpf: make kprobe_multi_link_prog_run always_inline
selftests/bpf: do not hardcode target rate in test_tc_edt BPF program
selftests/bpf: remove test_tc_edt.sh
selftests/bpf: integrate test_tc_edt into test_progs
selftests/bpf: rename test_tc_edt.bpf.c section to expose program type
selftests/bpf: Add success stats to rqspinlock stress test
rqspinlock: Precede non-head waiter queueing with AA check
rqspinlock: Disable spinning for trylock fallback
rqspinlock: Use trylock fallback when per-CPU rqnode is busy
rqspinlock: Perform AA checks immediately
rqspinlock: Enclose lock/unlock within lock entry acquisitions
bpf: Remove runqslower tool
selftests/bpf: Remove usage of lsm/file_alloc_security in selftest
bpf: Disable file_alloc_security hook
bpf: check for insn arrays in check_ptr_alignment
bpf: force BPF_F_RDONLY_PROG on insn array creation
bpf: Fix exclusive map memory leak
selftests/bpf: Make CS length configurable for rqspinlock stress test
selftests/bpf: Add lock wait time stats to rqspinlock stress test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- Add basic test for trace_marker_raw file to tracing selftest
- Fix invalid array access in printf dma_map_benchmark selftest
- Add tprobe enable/disable testcase to tracing selftest
- Update fprobe selftest for ftrace based fprobe
* tag 'linux_kselftest-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Update fprobe selftest for ftrace based fprobe
selftests: tracing: Add tprobe enable/disable testcase
selftests/run_kselftest.sh: exit with error if tests fail
selftests/dma: fix invalid array access in printf
selftests/tracing: Add basic test for trace_marker_raw file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Support both paths where tracefs is typically mounted in selftests
- Make old_sympos 0 and 1 equal. They both are valid when there is only
one symbol with the given name.
* tag 'livepatching-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: use canonical ftrace path
livepatch: Match old_sympos 0 and 1 in klp_find_func()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Improve recovery from misbehaving BPF schedulers.
When a scheduler puts many tasks with varying affinity restrictions
on a shared DSQ, CPUs scanning through tasks they cannot run can
overwhelm the system, causing lockups.
Bypass mode now uses per-CPU DSQs with a load balancer to avoid this,
and hooks into the hardlockup detector to attempt recovery.
Add scx_cpu0 example scheduler to demonstrate this scenario.
- Add lockless peek operation for DSQs to reduce lock contention for
schedulers that need to query queue state during load balancing.
- Allow scx_bpf_reenqueue_local() to be called from anywhere in
preparation for deprecating cpu_acquire/release() callbacks in favor
of generic BPF hooks.
- Prepare for hierarchical scheduler support: add
scx_bpf_task_set_slice() and scx_bpf_task_set_dsq_vtime() kfuncs,
make scx_bpf_dsq_insert*() return bool, and wrap kfunc args in
structs for future aux__prog parameter.
- Implement cgroup_set_idle() callback to notify BPF schedulers when a
cgroup's idle state changes.
- Fix migration tasks being incorrectly downgraded from
stop_sched_class to rt_sched_class across sched_ext enable/disable.
Applied late as the fix is low risk and the bug subtle but needs
stable backporting.
- Various fixes and cleanups including cgroup exit ordering,
SCX_KICK_WAIT reliability, and backward compatibility improvements.
* tag 'sched_ext-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (44 commits)
sched_ext: Fix incorrect sched_class settings for per-cpu migration tasks
sched_ext: tools: Removing duplicate targets during non-cross compilation
sched_ext: Use kvfree_rcu() to release per-cpu ksyncs object
sched_ext: Pass locked CPU parameter to scx_hardlockup() and add docs
sched_ext: Update comments replacing breather with aborting mechanism
sched_ext: Implement load balancer for bypass mode
sched_ext: Factor out abbreviated dispatch dequeue into dispatch_dequeue_locked()
sched_ext: Factor out scx_dsq_list_node cursor initialization into INIT_DSQ_LIST_CURSOR
sched_ext: Add scx_cpu0 example scheduler
sched_ext: Hook up hardlockup detector
sched_ext: Make handle_lockup() propagate scx_verror() result
sched_ext: Refactor lockup handlers into handle_lockup()
sched_ext: Make scx_exit() and scx_vexit() return bool
sched_ext: Exit dispatch and move operations immediately when aborting
sched_ext: Simplify breather mechanism with scx_aborting flag
sched_ext: Use per-CPU DSQs instead of per-node global DSQs in bypass mode
sched_ext: Refactor do_enqueue_task() local and global DSQ paths
sched_ext: Use shorter slice in bypass mode
sched_ext: Mark racy bitfields to prevent adding fields that can't tolerate races
sched_ext: Minor cleanups to scx_task_iter
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Defer task cgroup unlink until after the dying task's final context
switch so that controllers see the cgroup properly populated until
the task is truly gone
- cpuset cleanups and simplifications.
Enforce that domain isolated CPUs stay in root or isolated partitions
and fail if isolated+nohz_full would leave no housekeeping CPU. Fix
sched/deadline root domain handling during CPU hot-unplug and race
for tasks in attaching cpusets
- Misc fixes including memory reclaim protection documentation and
selftest KTAP conformance
* tag 'cgroup-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: Treat cpusets in attaching as populated
sched/deadline: Walk up cpuset hierarchy to decide root domain when hot-unplug
cgroup/cpuset: Introduce cpuset_cpus_allowed_locked()
docs: cgroup: No special handling of unpopulated memcgs
docs: cgroup: Note about sibling relative reclaim protection
docs: cgroup: Explain reclaim protection target
selftests/cgroup: conform test to KTAP format output
cpuset: remove need_rebuild_sched_domains
cpuset: remove global remote_children list
cpuset: simplify node setting on error
cgroup: include missing header for struct irq_work
cgroup: Fix sleeping from invalid context warning on PREEMPT_RT
cgroup/cpuset: Globally track isolated_cpus update
cgroup/cpuset: Ensure domain isolated CPUs stay in root or isolated partition
cgroup/cpuset: Move up prstate_housekeeping_conflict() helper
cgroup/cpuset: Fail if isolated and nohz_full don't leave any housekeeping
cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks()
cgroup: Defer task cgroup unlink until after the task is done switching out
cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()
cgroup: Rename cgroup lifecycle hooks to cgroup_task_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Properly handle SRCU readers within IRQ disabled sections in tiny
SRCU
- Preparation to reimplement RCU Tasks Trace on top of SRCU fast:
- Introduce API to expedite a grace period and test it through
rcutorture
- Split srcu-fast in two flavours: SRCU-fast and SRCU-fast-updown.
Both are still targeted toward faster readers (without full
barriers on LOCK and UNLOCK) at the expense of heavier write
side (using full RCU grace period ordering instead of simply
full ordering) as compared to "traditional" non-fast SRCU. But
those srcu-fast flavours are going to be optimized in two
different ways:
- SRCU-fast will become the reimplementation basis for
RCU-TASK-TRACE for consolidation. Since RCU-TASK-TRACE must
be NMI safe, SRCU-fast must be as well.
- SRCU-fast-updown will be needed for uretprobes code in order
to get rid of the read-side memory barriers while still
allowing entering the reader at task level while exiting it
in a timer handler. It is considered semaphore-like in that
it can have different owners between LOCK and UNLOCK.
However it is not NMI-safe.
The actual optimizations are work in progress for the next
cycle. Only the new interfaces are added for now, along with
related torture and scalability test code.
- Create/document/debug/torture new proper initializers for RCU fast:
DEFINE_SRCU_FAST() and init_srcu_struct_fast()
This allows for using right away the proper ordering on the write
side (either full ordering or full RCU grace period ordering)
without waiting for the read side to tell which to use.
This also optimizes the read side altogether with moving flavour
debug checks under debug config and with removing a costly RmW
operation on their first call.
- Make some diagnostic functions tracing safe
Refscale:
- Add performance testing for common context synchronizations
(Preemption, IRQ, Softirq) and per-cpu increments. Those are
relevant comparisons against SRCU-fast read side APIs, especially
as they are planned to synchronize further tracing fast-path code
Miscellanous:
- In order to prepare the layout for nohz_full work deferral to user
exit, the context tracking state must shrink the counter of
transitions to/from RCU not watching. The only possible hazard is
to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN
warnings. On recent discussions, we also concluded that all those
WRITE_ONCE() and READ_ONCE() on list APIs deserve appropriate
comments. Something to be expected for the next cycle
- Provide a script to apply several configs to several commits with
torture
- Allow torture to reuse a build directory in order to save needless
rebuild time
- Various cleanups"
* tag 'rcu.release.v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (29 commits)
refscale: Add SRCU-fast-updown readers
refscale: Exercise DEFINE_STATIC_SRCU_FAST() and init_srcu_struct_fast()
rcutorture: Make srcu{,d}_torture_init() announce the SRCU type
srcu: Create an SRCU-fast-updown API
refscale: Do not disable interrupts for tests involving local_bh_enable()
refscale: Add non-atomic per-CPU increment readers
refscale: Add this_cpu_inc() readers
refscale: Add preempt_disable() readers
refscale: Add local_bh_disable() readers
refscale: Add local_irq_disable() and local_irq_save() readers
torture: Permit negative kvm.sh --kconfig numberic arguments
srcu: Add SRCU_READ_FLAVOR_FAST_UPDOWN CPP macro
rcu: Mark diagnostic functions as notrace
rcutorture: Make TREE04 use CONFIG_RCU_DYNTICKS_TORTURE
rcutorture: Remove redundant rcutorture_one_extend() from rcu_torture_one_read()
rcutorture: Permit kvm-again.sh to re-use the build directory
torture: Add kvm-series.sh to test commit/scenario combination
rcu: use WRITE_ONCE() for ->next and ->pprev of hlist_nulls
locktorture: Fix memory leak in param_set_cpumask()
doc: Update for SRCU-fast definitions and initialization
...
|
|
Pull documentation updates from Jonathan Corbet:
"This has been another busy cycle for documentation, with a lot of
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules
that are imported by multiple programs. These modules have been
pulled together under tools/lib/python/ -- at least, for
documentation-related programs. There is other Python code in the
tree that might eventually want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer
used by default, and nobody has missed it, least of all anybody who
actually had to look at it.
- The docs build was controlled by a complex mess of makefilese that
few dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will
be far easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an
end to the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual"
* tag 'docs-6.19' of git://git.lwn.net/linux: (164 commits)
docs: makefile: move rustdoc check to the build wrapper
README: restructure with role-based documentation and guidelines
docs: kdoc: various fixes for grammar, spelling, punctuation
docs: kdoc_parser: use '@' for Excess enum value
docs: submitting-patches: Clarify that removal of Acks needs explanation too
docs: kdoc_parser: add data/function attributes to ignore
docs: MAINTAINERS: update Mauro's files/paths
docs/zh_CN: Add wd719x.rst translation
docs/zh_CN: Add libsas.rst translation
get_feat.pl: remove it, as it got replaced by get_feat.py
Documentation/sphinx/kernel_feat.py: use class directly
tools/docs/get_feat.py: convert get_feat.pl to Python
Documentation/admin-guide: fix typo and comment in cscope example
docs/zh_CN: Add data-integrity.rst translation
docs/zh_CN: Add blk-mq.rst translation
docs/zh_CN: Add block/index.rst translation
docs/zh_CN: Update the Chinese translation of kbuild.rst
docs: bring some order to our Python module hierarchy
docs: Move the python libraries to tools/lib/python
Documentation/kernel-parameters: Move the kernel build options
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- Preparations to the use of nolibc in UML:
- Cleanup of sparse warnings
- Library mode without _start()
- More consistency when disabling errno
- Unconditional installation of all architecture support files
- Always 64-bit wide ino_t and off_t
- Various cleanups and bug fixes
* tag 'nolibc-20251130-for-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (25 commits)
selftests/nolibc: error out on linker warnings
selftests/nolibc: use lld to link loongarch binaries
tools/nolibc: remove more __nolibc_enosys() fallbacks
tools/nolibc: remove now superfluous overflow check in llseek
tools/nolibc: use 64-bit off_t
tools/nolibc: prefer the llseek syscall
tools/nolibc: handle 64-bit off_t for llseek
tools/nolibc: use 64-bit ino_t
tools/nolibc: avoid using plain integer as NULL pointer
tools/nolibc: add support for fchdir()
tools/nolibc: clean up outdated comments in generic arch.h
tools/nolibc: make the "headers" target install all supported archs
tools/nolibc: add the more portable inttypes.h
tools/nolibc: provide the portable sys/select.h
tools/nolibc: add missing memchr() to string.h
tools/nolibc: fix misleading help message regarding installation path
tools/nolibc: add uio.h with readv and writev
tools/nolibc: add option to disable runtime
tools/nolibc: use __fallthrough__ rather than fallthrough
tools/nolibc: implement %m if errno is not defined
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add Nova Lake processor support to the Intel thermal drivers and
DPTF code, update thermal control documentation, simplify the ACPI
DPTF code related to thermal control, add QCS8300 compatible to the
tsens thermal DT bindings, add DT bindings for NXP i.MX91 thermal
module and add support for it to the imx91 thermal driver, update a
few other thermal drivers and fix a format string issue in a thermal
utility:
- Add Nova Lake processor thermal device to the int340x
processor_thermal driver, add DLVR support for Nova Lake to it, add
Nova Lake support to the ACPI DPTF code, document thermal
throttling on Intel platforms, and update workload type hint
interface documentation (Srinivas Pandruvada)
- Remove int340x thermal scan handler from the ACPI DPTF code because
it turned out to be unnecessary (Slawomir Rosek)
- Clean up the Intel int340x thermal driver (Kaushlendra Kumar)
- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek
Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS() in R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for QCom Tsens (Gaurav Kohli)
- Add support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)"
* tag 'thermal-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit
dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module
dt-bindings: thermal: tsens: Add QCS8300 compatible
dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
tools/thermal/thermal-engine: Fix format string bug in thermal-engine
docs: driver-api/thermal/intel_dptf: Add new workload type hint
thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
Documentation: thermal: Document thermal throttling on Intel platforms
ACPI: DPTF: Support Nova Lake
thermal: intel: int340x: Add DLVR support for Nova Lake
thermal: int340x: processor_thermal: Add Nova Lake processor thermal device
thermal: intel: int340x: Replace sprintf() with sysfs_emit()
thermal: intel: int340x: Use symbolic constant for UUID comparison
thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment
dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU
ACPI: DPTF: Remove int340x thermal scan handler
thermal: intel: Select INT340X_THERMAL from INTEL_SOC_DTS_THERMAL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"There are quite a few interesting things here, including new hardware
support, new features, some bug fixes and documentation updates. In
addition, there are a usual bunch of minor fixes and cleanups all
over.
In the new hardware support category, there are intel_pstate and
intel_rapl driver updates to support new processors, Panther Lake,
Wildcat Lake, Noval Lake, and Diamond Rapids in the OOB mode, OPP and
bandwidth allocation support in the tegra186 cpufreq driver, and
JH7110S SOC support in dt-platdev cpufreq.
The new features are the PM QoS CPU latency limit for suspend-to-idle,
the netlink support for the energy model management, support for
terminating system suspend via a wakeup event during the sync of file
systems, configurable number of hibernation compression threads, the
runtime PM auto-cleanup macros, and the "poweroff" PM event that is
expected to be used during system shutdown.
Bugs are mostly fixed in cpuidle governors, but there are also fixes
elsewhere, like in the amd-pstate cpufreq driver.
Documentation updates include, but are not limited to, a new doc on
debugging shutdown hangs, cross-referencing fixes and cleanups in the
intel_pstate documentation, and updates of comments in the core
hibernation code.
Specifics:
- Introduce and document a QoS limit on CPU exit latency during
wakeup from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
- Add support for sending netlink notifications to user space on
energy model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
- Use residency threshold in polling state override decisions in the
menu cpuidle governor (Aboorva Devarajan)
- Add sanity check for exit latency and target residency in the
cpufreq core (Rafael Wysocki)
- Use this_cpu_ptr() where possible in the teo governor (Christian
Loehle)
- Rework the handling of tick wakeups in the teo cpuidle governor to
increase the likelihood of stopping the scheduler tick in the cases
when tick wakeups can be counted as non-timer ones (Rafael Wysocki)
- Fix a reverse condition in the teo cpuidle governor and drop a
misguided target residency check from it (Rafael Wysocki)
- Clean up multiple minor defects in the teo cpuidle governor (Rafael
Wysocki)
- Update header inclusion to make it follow the Include What You Use
principle (Andy Shevchenko)
- Enable MSR-based RAPL PMU support in the intel_rapl power capping
driver and arrange for using it on the Panther Lake and Wildcat
Lake processors (Kuppuswamy Sathyanarayanan)
- Add support for Nova Lake and Wildcat Lake processors to the
intel_rapl power capping driver (Kaushlendra Kumar, Srinivas
Pandruvada)
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate
cpufreq driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking
in it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi,
Hal Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in generic
PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power
management watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source
from the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael
Wysocki)
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
- Move governor.h from devfreq under include/linux/ and rename to
devfreq-governor.h to allow devfreq governor definitions in out of
drivers/devfreq/ (Dmitry Baryshkov)
- Use min() to improve readability in tegra30-devfreq.c (Thorsten
Blum)
- Fix potential use-after-free issue of OPP handling in
hisi_uncore_freq.c (Pengjie Zhang)
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name in
governor_simpleondemand.c in devfreq (Riwen Lu)"
* tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (96 commits)
PM / devfreq: Fix typo in DFSO_DOWNDIFFERENTIAL macro name
cpuidle: Warn instead of bailing out if target residency check fails
cpuidle: Update header inclusion
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
cpuidle: governors: teo: Add missing space to the description
PM: hibernate: Extra cleanup of comments in swap handling code
PM / devfreq: tegra30: use min to simplify actmon_cpu_to_emc_rate
PM / devfreq: hisi: Fix potential UAF in OPP handling
PM / devfreq: Move governor.h to a public header location
powercap: intel_rapl: Enable MSR-based RAPL PMU support
powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers
cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
cpufreq: ACPI: Replace udelay() with usleep_range()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add Microsoft fan extensions support to the ACPI fan driver, fix
a bug in ACPICA, update other ACPI drivers (processor, time and alarm
device), update ACPI power management code and ACPI device properties
management, and fix an ACPI utility:
- Avoid walking the ACPI namespace in the AML interpreter if the
starting node cannot be determined (Cryolitia PukNgae)
- Use min() instead of min_t() in the ACPI device properties handling
code to avoid discarding significant bits (David Laight)
- Fix potential fwnode refcount leak in
acpi_fwnode_graph_parse_endpoint() that may prevent the parent
fwnode from being released (Haotian Zhang)
- Rework acpi_graph_get_next_endpoint() to use ACPI functions only,
remove unnecessary conditionals from it to make it easier to
follow, and make acpi_get_next_subnode() static (Sakari Ailus)
- Drop unused function acpi_get_lps0_constraint(), make some
Low-Power S0 callback functions for suspend-to-idle static, and
rearrange the code retrieving Low-Power S0 constraints so it only
runs when the constraints are actually used (Rafael Wysocki)
- Drop redundant locking from the ACPI battery driver (Rafael
Wysocki)
- Improve runtime PM in the ACPI time and alarm device (TAD) driver
using guard macros and rearrange code related to runtime PM in
acpi_tad_remove() (Rafael Wysocki)
- Add support for Microsoft fan extensions to the ACPI fan driver
along with notification support and work around a 64-bit firmware
bug in that driver (Armin Wolf)
- Use ACPI_FREE() to free ACPI buffer in the ACPI DPTF code
(Kaushlendra Kumar)
- Fix a memory leak and a resource leak in the ACPI pfrut utility
(Malaya Kumar Rout)
- Replace `core::mem::zeroed` with `pin_init::zeroed` in the ACPI
Rust code (Siyuan Huang)
- Update the ACPI code to use the new style of allocating workqueues
and new global workqueues (Marco Crivellari)
- Fix two spelling mistakes in the ACPI code (Chu Guangqing)
- Fix ISAPNP to generate uevents to auto-load modules (René Rebe)
- Relocate the state flags initialization in the ACPI processor idle
driver and drop redundant C-state count checks from it (Huisong Li)
- Fix map_x2apic_id() in the ACPI processor core driver for
amd-pstate on am4 (René Rebe)"
* tag 'acpi-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
ACPI: PM: Fix a spelling mistake
ACPI: LPSS: Fix a spelling mistake
ACPI: processor_core: fix map_x2apic_id for amd-pstate on am4
ACPICA: Avoid walking the Namespace if start_node is NULL
ACPI: tools: pfrut: fix memory leak and resource leak in pfrut.c
ACPI: property: use min() instead of min_t()
PNP: Fix ISAPNP to generate uevents to auto-load modules
ACPI: property: Fix fwnode refcount leak in acpi_fwnode_graph_parse_endpoint()
ACPI: DPTF: Use ACPI_FREE() for ACPI buffer deallocation
ACPI: processor: idle: Drop redundant C-state count checks
ACPI: thermal: Add WQ_PERCPU to alloc_workqueue() users
ACPI: OSL: Add WQ_PERCPU to alloc_workqueue() users
ACPI: EC: Add WQ_PERCPU to alloc_workqueue() users
ACPI: OSL: replace use of system_wq with system_percpu_wq
ACPI: scan: replace use of system_unbound_wq with system_dfl_wq
ACPI: fan: Add support for Microsoft fan extensions
ACPI: fan: Add hwmon notification support
ACPI: fan: Add basic notification support
ACPI: TAD: Improve runtime PM using guard macros
ACPI: TAD: Rearrange runtime PM operations in acpi_tad_remove()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"These are the arm64 updates for 6.19.
The biggest part is the Arm MPAM driver under drivers/resctrl/.
There's a patch touching mm/ to handle spurious faults for huge pmd
(similar to the pte version). The corresponding arm64 part allows us
to avoid the TLB maintenance if a (huge) page is reused after a write
fault. There's EFI refactoring to allow runtime services with
preemption enabled and the rest is the usual perf/PMU updates and
several cleanups/typos.
Summary:
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support
for NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic
arm64/pageattr: Propagate return value from __change_memory_common
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
Documentation/arm64: Fix the typo of register names
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Provide a new interface for dynamic configuration and deconfiguration
of hotplug memory, allowing with and without memmap_on_memory
support. This makes the way memory hotplug is handled on s390 much
more similar to other architectures
- Remove compat support. There shouldn't be any compat user space
around anymore, therefore get rid of a lot of code which also doesn't
need to be tested anymore
- Add stackprotector support. GCC 16 will get new compiler options,
which allow to generate code required for kernel stackprotector
support
- Merge pai_crypto and pai_ext PMU drivers into a new driver. This
removes a lot of duplicated code. The new driver is also extendable
and allows to support new PMUs
- Add driver override support for AP queues
- Rework and extend zcrypt and AP trace events to allow for tracing of
crypto requests
- Support block sizes larger than 65535 bytes for CCW tape devices
- Since the rework of the virtual kernel address space the module area
and the kernel image are within the same 4GB area. This eliminates
the need of weak per cpu variables. Get rid of
ARCH_MODULE_NEEDS_WEAK_PER_CPU
- Various other small improvements and fixes
* tag 's390-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (92 commits)
watchdog: diag288_wdt: Remove KMSG_COMPONENT macro
s390/entry: Use lay instead of aghik
s390/vdso: Get rid of -m64 flag handling
s390/vdso: Rename vdso64 to vdso
s390: Rename head64.S to head.S
s390/vdso: Use common STABS_DEBUG and DWARF_DEBUG macros
s390: Add stackprotector support
s390/modules: Simplify module_finalize() slightly
s390: Remove KMSG_COMPONENT macro
s390/percpu: Get rid of ARCH_MODULE_NEEDS_WEAK_PER_CPU
s390/ap: Restrict driver_override versus apmask and aqmask use
s390/ap: Rename mutex ap_perms_mutex to ap_attr_mutex
s390/ap: Support driver_override for AP queue devices
s390/ap: Use all-bits-one apmask/aqmask for vfio in_use() checks
s390/debug: Update description of resize operation
s390/syscalls: Switch to generic system call table generation
s390/syscalls: Remove system call table pointer from thread_struct
s390/uapi: Remove 31 bit support from uapi header files
s390: Remove compat support
tools: Remove s390 compat support
...
|
|
Merge in late fixes in preparation for the net-next PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU feature updates from Dave Hansen:
"The biggest thing of note here is Linear Address Space Separation
(LASS). It represents the first time I can think of that the
upper=>kernel/lower=>user address space convention is actually
recognized by the hardware on x86. It ensures that userspace can not
even get the hardware to _start_ page walks for the kernel address
space. This, of course, is a really nice generic side channel defense.
This is really only a down payment on LASS support. There are still
some details to work out in its interaction with EFI calls and
vsyscall emulation. For now, LASS is disabled if either of those
features is compiled in (which is almost always the case).
There's also one straggler commit in here which converts an
under-utilized AMD CPU feature leaf into a generic Linux-defined leaf
so more feature can be packed in there.
Summary:
- Enable Linear Address Space Separation (LASS)
- Change X86_FEATURE leaf 17 from an AMD leaf to Linux-defined"
* tag 'x86_cpu_for_6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Enable LASS during CPU initialization
selftests/x86: Update the negative vsyscall tests to expect a #GP
x86/traps: Communicate a LASS violation in #GP message
x86/kexec: Disable LASS during relocate kernel
x86/alternatives: Disable LASS when patching kernel code
x86/asm: Introduce inline memcpy and memset
x86/cpu: Add an LASS dependency on SMAP
x86/cpufeatures: Enumerate the LASS feature bits
x86/cpufeatures: Make X86_FEATURE leaf 17 Linux-specific
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The mandatory pile of cleanups the cat drags in every merge window
* tag 'x86_cleanups_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Clean up whitespace in a20.c
x86/mm: Delete disabled debug code
x86/{boot,mtrr}: Remove unused function declarations
x86/percpu: Use BIT_WORD() and BIT_MASK() macros
x86/cpufeatures: Correct LKGS feature flag description
x86/idtentry: Add missing '*' to kernel-doc lines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Prevent a thundering herd problem when the timekeeper CPU is delayed
and a large number of CPUs compete to acquire jiffies_lock to do the
update. Limit it to one CPU with a separate "uncontended" atomic
variable.
- A set of improvements for the timer migration mechanism:
- Support imbalanced NUMA trees correctly
- Support dynamic exclusion of CPUs from the migrator duty to allow
the cpuset/isolation mechanism to exclude them from handling
timers of remote idle CPUs
- The usual small updates, cleanups and enhancements
* tag 'timers-core-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Exclude isolated cpus from hierarchy
cpumask: Add initialiser to use cleanup helpers
sched/isolation: Force housekeeping if isolcpus and nohz_full don't leave any
cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks()
timers/migration: Use scoped_guard on available flag set/clear
timers/migration: Add mask for CPUs available in the hierarchy
timers/migration: Rename 'online' bit to 'available'
selftests/timers/nanosleep: Add tests for return of remaining time
selftests/timers: Clean up kernel version check in posix_timers
time: Fix a few typos in time[r] related code comments
time: tick-oneshot: Add missing Return and parameter descriptions to kernel-doc
hrtimer: Store time as ktime_t in restart block
timers/migration: Remove dead code handling idle CPU checking for remote timers
timers/migration: Remove unused "cpu" parameter from tmigr_get_group()
timers/migration: Assert that hotplug preparing CPU is part of stable active hierarchy
timers/migration: Fix imbalanced NUMA trees
timers/migration: Remove locking on group connection
timers/migration: Convert "while" loops to use "for"
tick/sched: Limit non-timekeeper CPUs calling jiffies update
|
|
Add tests that trigger packet drops in cake_enqueue(): "CAKE with QFQ
Parent - CAKE enqueue with packets dropping". It forces CAKE_enqueue to
return NET_XMIT_CN after dropping the packets when it has a QFQ parent.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20251128001415.377823-3-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Callchain support:
- Add support for deferred user-space stack unwinding for perf,
enabled on x86. (Peter Zijlstra, Steven Rostedt)
- unwind_user/x86: Enable frame pointer unwinding on x86 (Josh
Poimboeuf)
x86 PMU support and infrastructure:
- x86/insn: Simplify for_each_insn_prefix() (Peter Zijlstra)
- x86/insn,uprobes,alternative: Unify insn_is_nop() (Peter Zijlstra)
Intel PMU driver:
- Large series to prepare for and implement architectural PEBS
support for Intel platforms such as Clearwater Forest (CWF) and
Panther Lake (PTL). (Dapeng Mi, Kan Liang)
- Check dynamic constraints (Kan Liang)
- Optimize PEBS extended config (Peter Zijlstra)
- cstates:
- Remove PC3 support from LunarLake (Zhang Rui)
- Add Pantherlake support (Zhang Rui)
- Clearwater Forest support (Zide Chen)
AMD PMU driver:
- x86/amd: Check event before enable to avoid GPF (George Kennedy)
Fixes and cleanups:
- task_work: Fix NMI race condition (Peter Zijlstra)
- perf/x86: Fix NULL event access and potential PEBS record loss
(Dapeng Mi)
- Misc other fixes and cleanups (Dapeng Mi, Ingo Molnar, Peter
Zijlstra)"
* tag 'perf-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
perf/x86/intel: Fix and clean up intel_pmu_drain_arch_pebs() type use
perf/x86/intel: Optimize PEBS extended config
perf/x86/intel: Check PEBS dyn_constraints
perf/x86/intel: Add a check for dynamic constraints
perf/x86/intel: Add counter group support for arch-PEBS
perf/x86/intel: Setup PEBS data configuration and enable legacy groups
perf/x86/intel: Update dyn_constraint base on PEBS event precise level
perf/x86/intel: Allocate arch-PEBS buffer and initialize PEBS_BASE MSR
perf/x86/intel: Process arch-PEBS records or record fragments
perf/x86/intel/ds: Factor out PEBS group processing code to functions
perf/x86/intel/ds: Factor out PEBS record processing code to functions
perf/x86/intel: Initialize architectural PEBS
perf/x86/intel: Correct large PEBS flag check
perf/x86/intel: Replace x86_pmu.drain_pebs calling with static call
perf/x86: Fix NULL event access and potential PEBS record loss
perf/x86: Remove redundant is_x86_event() prototype
entry,unwind/deferred: Fix unwind_reset_info() placement
unwind_user/x86: Fix arch=um build
perf: Support deferred user unwind
unwind_user/x86: Teach FP unwind about start of function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- klp-build livepatch module generation (Josh Poimboeuf)
Introduce new objtool features and a klp-build script to generate
livepatch modules using a source .patch as input.
This builds on concepts from the longstanding out-of-tree kpatch
project which began in 2012 and has been used for many years to
generate livepatch modules for production kernels. However, this is a
complete rewrite which incorporates hard-earned lessons from 12+
years of maintaining kpatch.
Key improvements compared to kpatch-build:
- Integrated with objtool: Leverages objtool's existing control-flow
graph analysis to help detect changed functions.
- Works on vmlinux.o: Supports late-linked objects, making it
compatible with LTO, IBT, and similar.
- Simplified code base: ~3k fewer lines of code.
- Upstream: No more out-of-tree #ifdef hacks, far less cruft.
- Cleaner internals: Vastly simplified logic for
symbol/section/reloc inclusion and special section extraction.
- Robust __LINE__ macro handling: Avoids false positive binary diffs
caused by the __LINE__ macro by introducing a fix-patch-lines
script which injects #line directives into the source .patch to
preserve the original line numbers at compile time.
- Disassemble code with libopcodes instead of running objdump
(Alexandre Chartre)
- Disassemble support (-d option to objtool) by Alexandre Chartre,
which supports the decoding of various Linux kernel code generation
specials such as alternatives:
17ef: sched_balance_find_dst_group+0x62f mov 0x34(%r9),%edx
17f3: sched_balance_find_dst_group+0x633 | <alternative.17f3> | X86_FEATURE_POPCNT
17f3: sched_balance_find_dst_group+0x633 | call 0x17f8 <__sw_hweight64> | popcnt %rdi,%rax
17f8: sched_balance_find_dst_group+0x638 cmp %eax,%edx
... jump table alternatives:
1895: sched_use_asym_prio+0x5 test $0x8,%ch
1898: sched_use_asym_prio+0x8 je 0x18a9 <sched_use_asym_prio+0x19>
189a: sched_use_asym_prio+0xa | <jump_table.189a> | JUMP
189a: sched_use_asym_prio+0xa | jmp 0x18ae <sched_use_asym_prio+0x1e> | nop2
189c: sched_use_asym_prio+0xc mov $0x1,%eax
18a1: sched_use_asym_prio+0x11 and $0x80,%ecx
... exception table alternatives:
native_read_msr:
5b80: native_read_msr+0x0 mov %edi,%ecx
5b82: native_read_msr+0x2 | <ex_table.5b82> | EXCEPTION
5b82: native_read_msr+0x2 | rdmsr | resume at 0x5b84 <native_read_msr+0x4>
5b84: native_read_msr+0x4 shl $0x20,%rdx
.... x86 feature flag decoding (also see the X86_FEATURE_POPCNT
example in sched_balance_find_dst_group() above):
2faaf: start_thread_common.constprop.0+0x1f jne 0x2fba4 <start_thread_common.constprop.0+0x114>
2fab5: start_thread_common.constprop.0+0x25 | <alternative.2fab5> | X86_FEATURE_ALWAYS | X86_BUG_NULL_SEG
2fab5: start_thread_common.constprop.0+0x25 | jmp 0x2faba <.altinstr_aux+0x2f4> | jmp 0x4b0 <start_thread_common.constprop.0+0x3f> | nop5
2faba: start_thread_common.constprop.0+0x2a mov $0x2b,%eax
... NOP sequence shortening:
1048e2: snapshot_write_finalize+0xc2 je 0x104917 <snapshot_write_finalize+0xf7>
1048e4: snapshot_write_finalize+0xc4 nop6
1048ea: snapshot_write_finalize+0xca nop11
1048f5: snapshot_write_finalize+0xd5 nop11
104900: snapshot_write_finalize+0xe0 mov %rax,%rcx
104903: snapshot_write_finalize+0xe3 mov 0x10(%rdx),%rax
... and much more.
- Function validation tracing support (Alexandre Chartre)
- Various -ffunction-sections fixes (Josh Poimboeuf)
- Clang AutoFDO (Automated Feedback-Directed Optimizations) support
(Josh Poimboeuf)
- Misc fixes and cleanups (Borislav Petkov, Chen Ni, Dylan Hatch, Ingo
Molnar, John Wang, Josh Poimboeuf, Pankaj Raghav, Peter Zijlstra,
Thorsten Blum)
* tag 'objtool-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
objtool: Fix segfault on unknown alternatives
objtool: Build with disassembly can fail when including bdf.h
objtool: Trim trailing NOPs in alternative
objtool: Add wide output for disassembly
objtool: Compact output for alternatives with one instruction
objtool: Improve naming of group alternatives
objtool: Add Function to get the name of a CPU feature
objtool: Provide access to feature and flags of group alternatives
objtool: Fix address references in alternatives
objtool: Disassemble jump table alternatives
objtool: Disassemble exception table alternatives
objtool: Print addresses with alternative instructions
objtool: Disassemble group alternatives
objtool: Print headers for alternatives
objtool: Preserve alternatives order
objtool: Add the --disas=<function-pattern> action
objtool: Do not validate IBT for .return_sites and .call_sites
objtool: Improve tracing of alternative instructions
objtool: Add functions to better name alternatives
objtool: Identify the different types of alternatives
...
|
|
Currently, tolerance is computed against the TC’s expected percentage,
making TC3 (20%) validation overly strict and TC4 (80%) overly loose.
Update BandwidthValidator to take a dict of shares and compute bounds
relative to the overall total, so that all shares are validated
consistently.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-7-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct the documented bandwidth distribution between TC3 and TC4
from 80/20 to 20/80. Update test descriptions and printed messages
to consistently reflect the intended split.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-6-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 7c32f7a2d3db ("selftests: net: py: don't default to shell=True")
changed the cmd() helper to avoid spawning a shell unless explicitly
requested.
The devlink_rate_tc_bw test enables SR-IOV by writing to the
sriov_numvfs sysfs attribute using redirection. Without shell=True the
redirection is not interpreted and the VF device never appears,
causing the test to fail.
Fix by explicitly passing shell=True in the two places that update
sriov_numvfs.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-5-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the inline iperf3 subprocess and JSON parsing with
Iperf3Runner.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-4-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GenerateTraffic was added to spin up long-running iperf3 load, mainly
to drive high PPS background traffic. It was never meant to provide
stable throughput numbers, and trying to repurpose it for measurement
does not make sense.
Introduce Iperf3Runner to allow tests to split out server/client
configuration, control start/stop, and collect JSON output for
analysis. This makes it possible to measure bandwidth directly when
validating egress shaping.
GenerateTraffic stays as the background load generator, reusing the
common iperf3 helpers under the hood.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-3-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This makes devlink_rate_tc_bw.py present in the Makefile under the same
directory.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-2-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This removes some noise that can be distracting while looking at
selftests by redirecting socat stderr to /dev/null.
Before this commit, netcons_basic would output:
Running with target mode: basic (ipv6)
2025/11/29 12:08:03 socat[259] W exiting on signal 15
2025/11/29 12:08:03 socat[271] W exiting on signal 15
basic : ipv6 : Test passed
Running with target mode: basic (ipv4)
2025/11/29 12:08:05 socat[329] W exiting on signal 15
2025/11/29 12:08:05 socat[322] W exiting on signal 15
basic : ipv4 : Test passed
Running with target mode: extended (ipv6)
2025/11/29 12:08:08 socat[386] W exiting on signal 15
2025/11/29 12:08:08 socat[386] W exiting on signal 15
2025/11/29 12:08:08 socat[380] W exiting on signal 15
extended : ipv6 : Test passed
Running with target mode: extended (ipv4)
2025/11/29 12:08:10 socat[440] W exiting on signal 15
2025/11/29 12:08:10 socat[435] W exiting on signal 15
2025/11/29 12:08:10 socat[435] W exiting on signal 15
extended : ipv4 : Test passed
After these changes, output looks like:
Running with target mode: basic (ipv6)
basic : ipv6 : Test passed
Running with target mode: basic (ipv4)
basic : ipv4 : Test passed
Running with target mode: extended (ipv6)
extended : ipv6 : Test passed
Running with target mode: extended (ipv4)
extended : ipv4 : Test passed
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251129-netcons-socat-noise-v1-1-605a0cea8fca@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New NIPA installation had been reporting a few flaky tests.
arp_ndisc_evict_nocarrier is most flaky of them all.
I suspect that the flakiness is due to udev swapping the MAC
addresses on the interfaces. Extend the message in
arp_ndisc_evict_nocarrier to hint at this potential issue.
Having the neigh get fail right after ping is rather unusual,
unless udev changes the MAC addr causing a flush in the meantime.
Link: https://patch.msgid.link/20251127194556.2409574-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Following up on the old discussion [1]. Let the BaseExceptions out of
defer()'ed cleanup. And handle it in the main loop. This allows us to
exit the tests if user hit Ctrl-C during defer().
Link: https://lore.kernel.org/20251119063228.3adfd743@kernel.org # [1]
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251128004846.2602687-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20251128173802.318520-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfd and coredump updates from Christian Brauner:
"Features:
- Expose coredump signal via pidfd
Expose the signal that caused the coredump through the pidfd
interface. The recent changes to rework coredump handling to rely
on unix sockets are in the process of being used in systemd. The
previous systemd coredump container interface requires the coredump
file descriptor and basic information including the signal number
to be sent to the container. This means the signal number needs to
be available before sending the coredump to the container.
- Add supported_mask field to pidfd
Add a new supported_mask field to struct pidfd_info that indicates
which information fields are supported by the running kernel. This
allows userspace to detect feature availability without relying on
error codes or kernel version checks.
Cleanups:
- Drop struct pidfs_exit_info and prepare to drop exit_info pointer,
simplifying the internal publication mechanism for exit and
coredump information retrievable via the pidfd ioctl
- Use guard() for task_lock in pidfs
- Reduce wait_pidfd lock scope
- Add missing PIDFD_INFO_SIZE_VER1 constant
- Add missing BUILD_BUG_ON() assert on struct pidfd_info
Fixes:
- Fix PIDFD_INFO_COREDUMP handling
Selftests:
- Split out coredump socket tests and common helpers into separate
files for better organization
- Fix userspace coredump client detection issues
- Handle edge-triggered epoll correctly
- Ignore ENOSPC errors in tests
- Add debug logging to coredump socket tests, socket protocol tests,
and test helpers
- Add tests for PIDFD_INFO_COREDUMP_SIGNAL
- Add tests for supported_mask field
- Update pidfd header for selftests"
* tag 'vfs-6.19-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits)
pidfs: reduce wait_pidfd lock scope
selftests/coredump: add second PIDFD_INFO_COREDUMP_SIGNAL test
selftests/coredump: add first PIDFD_INFO_COREDUMP_SIGNAL test
selftests/coredump: ignore ENOSPC errors
selftests/coredump: add debug logging to coredump socket protocol tests
selftests/coredump: add debug logging to coredump socket tests
selftests/coredump: add debug logging to test helpers
selftests/coredump: handle edge-triggered epoll correctly
selftests/coredump: fix userspace coredump client detection
selftests/coredump: fix userspace client detection
selftests/coredump: split out coredump socket tests
selftests/coredump: split out common helpers
selftests/pidfd: add second supported_mask test
selftests/pidfd: add first supported_mask test
selftests/pidfd: update pidfd header
pidfs: expose coredump signal
pidfs: drop struct pidfs_exit_info
pidfs: prepare to drop exit_info pointer
pidfd: add a new supported_mask field
pidfs: add missing BUILD_BUG_ON() assert on struct pidfd_info
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace updates from Christian Brauner:
"This contains substantial namespace infrastructure changes including a new
system call, active reference counting, and extensive header cleanups.
The branch depends on the shared kbuild branch for -fms-extensions support.
Features:
- listns() system call
Add a new listns() system call that allows userspace to iterate
through namespaces in the system. This provides a programmatic
interface to discover and inspect namespaces, addressing
longstanding limitations:
Currently, there is no direct way for userspace to enumerate
namespaces. Applications must resort to scanning /proc/*/ns/ across
all processes, which is:
- Inefficient - requires iterating over all processes
- Incomplete - misses namespaces not attached to any running
process but kept alive by file descriptors, bind mounts, or
parent references
- Permission-heavy - requires access to /proc for many processes
- No ordering or ownership information
- No filtering per namespace type
The listns() system call solves these problems:
ssize_t listns(const struct ns_id_req *req, u64 *ns_ids,
size_t nr_ns_ids, unsigned int flags);
struct ns_id_req {
__u32 size;
__u32 spare;
__u64 ns_id;
struct /* listns */ {
__u32 ns_type;
__u32 spare2;
__u64 user_ns_id;
};
};
Features include:
- Pagination support for large namespace sets
- Filtering by namespace type (MNT_NS, NET_NS, USER_NS, etc.)
- Filtering by owning user namespace
- Permission checks respecting namespace isolation
- Active Reference Counting
Introduce an active reference count that tracks namespace
visibility to userspace. A namespace is visible in the following
cases:
- The namespace is in use by a task
- The namespace is persisted through a VFS object (namespace file
descriptor or bind-mount)
- The namespace is a hierarchical type and is the parent of child
namespaces
The active reference count does not regulate lifetime (that's still
done by the normal reference count) - it only regulates visibility
to namespace file handles and listns().
This prevents resurrection of namespaces that are pinned only for
internal kernel reasons (e.g., user namespaces held by
file->f_cred, lazy TLB references on idle CPUs, etc.) which should
not be accessible via (1)-(3).
- Unified Namespace Tree
Introduce a unified tree structure for all namespaces with:
- Fixed IDs assigned to initial namespaces
- Lookup based solely on inode number
- Maintained list of owned namespaces per user namespace
- Simplified rbtree comparison helpers
Cleanups
- Header Reorganization:
- Move namespace types into separate header (ns_common_types.h)
- Decouple nstree from ns_common header
- Move nstree types into separate header
- Switch to new ns_tree_{node,root} structures with helper functions
- Use guards for ns_tree_lock
- Initial Namespace Reference Count Optimization
- Make all reference counts on initial namespaces a nop to avoid
pointless cacheline ping-pong for namespaces that can never go
away
- Drop custom reference count initialization for initial namespaces
- Add NS_COMMON_INIT() macro and use it for all namespaces
- pid: rely on common reference count behavior
- Miscellaneous Cleanups
- Rename exit_task_namespaces() to exit_nsproxy_namespaces()
- Rename is_initial_namespace() and make argument const
- Use boolean to indicate anonymous mount namespace
- Simplify owner list iteration in nstree
- nsfs: raise SB_I_NODEV, SB_I_NOEXEC, and DCACHE_DONTCACHE explicitly
- nsfs: use inode_just_drop()
- pidfs: raise DCACHE_DONTCACHE explicitly
- pidfs: simplify PIDFD_GET__NAMESPACE ioctls
- libfs: allow to specify s_d_flags
- cgroup: add cgroup namespace to tree after owner is set
- nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
Fixes:
- setns(pidfd, ...) race condition
Fix a subtle race when using pidfds with setns(). When the target
task exits after prepare_nsset() but before commit_nsset(), the
namespace's active reference count might have been dropped. If
setns() then installs the namespaces, it would bump the active
reference count from zero without taking the required reference on
the owner namespace, leading to underflow when later decremented.
The fix resurrects the ownership chain if necessary - if the caller
succeeded in grabbing passive references, the setns() should
succeed even if the target task exits or gets reaped.
- Return EFAULT on put_user() error instead of success
- Make sure references are dropped outside of RCU lock (some
namespaces like mount namespace sleep when putting the last
reference)
- Don't skip active reference count initialization for network
namespace
- Add asserts for active refcount underflow
- Add asserts for initial namespace reference counts (both passive
and active)
- ipc: enable is_ns_init_id() assertions
- Fix kernel-doc comments for internal nstree functions
- Selftests
- 15 active reference count tests
- 9 listns() functionality tests
- 7 listns() permission tests
- 12 inactive namespace resurrection tests
- 3 threaded active reference count tests
- commit_creds() active reference tests
- Pagination and stress tests
- EFAULT handling test
- nsid tests fixes"
* tag 'namespace-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (103 commits)
pidfs: simplify PIDFD_GET_<type>_NAMESPACE ioctls
nstree: fix kernel-doc comments for internal functions
nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
selftests/namespaces: fix nsid tests
ns: drop custom reference count initialization for initial namespaces
pid: rely on common reference count behavior
ns: add asserts for initial namespace active reference counts
ns: add asserts for initial namespace reference counts
ns: make all reference counts on initial namespace a nop
ipc: enable is_ns_init_id() assertions
fs: use boolean to indicate anonymous mount namespace
ns: rename is_initial_namespace()
ns: make is_initial_namespace() argument const
nstree: use guards for ns_tree_lock
nstree: simplify owner list iteration
nstree: switch to new structures
nstree: add helper to operate on struct ns_tree_{node,root}
nstree: move nstree types into separate header
nstree: decouple from ns_common header
ns: move namespace types into separate header
...
|
|
So 'objtool --link -d vmlinux.o' gets surprised by this endbr64+endbr64 pattern
in ___bpf_prog_run():
___bpf_prog_run:
1e7680: ___bpf_prog_run+0x0 push %r12
1e7682: ___bpf_prog_run+0x2 mov %rdi,%r12
1e7685: ___bpf_prog_run+0x5 push %rbp
1e7686: ___bpf_prog_run+0x6 xor %ebp,%ebp
1e7688: ___bpf_prog_run+0x8 push %rbx
1e7689: ___bpf_prog_run+0x9 mov %rsi,%rbx
1e768c: ___bpf_prog_run+0xc movzbl (%rbx),%esi
1e768f: ___bpf_prog_run+0xf movzbl %sil,%edx
1e7693: ___bpf_prog_run+0x13 mov %esi,%eax
1e7695: ___bpf_prog_run+0x15 mov 0x0(,%rdx,8),%rdx
1e769d: ___bpf_prog_run+0x1d jmp 0x1e76a2 <__x86_indirect_thunk_rdx>
1e76a2: ___bpf_prog_run+0x22 endbr64
1e76a6: ___bpf_prog_run+0x26 endbr64
1e76aa: ___bpf_prog_run+0x2a mov 0x4(%rbx),%edx
And crashes due to blindly dereferencing alt->insn->alt_group.
Bail out on NULL ->alt_group, which produces this warning and continues
with the disassembly, instead of a segfault:
.git/O/vmlinux.o: warning: objtool: <alternative.1e769d>: failed to disassemble alternative
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
- In order to prepare the layout for nohz_full work deferral to
user exit, the context tracking state must shrink the counter
of transitions to/from RCU not watching. The only possible hazard
is to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption.
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN warnings.
On recent discussions, we also concluded that all those WRITE_ONCE()
and READ_ONCE() on list APIs deserve appropriate comments. Something
to be expected for the next cycle.
- Provide a script to apply several configs to several commits with torture.
- Allow torture to reuse a build directory in order to save needless
rebuild time.
- Various cleanups.
|
|
test_tc_edt currently defines the target rate in both the userspace and
BPF parts. This value could be defined once in the userspace part if we
make it able to configure the BPF program before starting the test.
Add a target_rate variable in the BPF part, and make the userspace part
set it to the desired rate before attaching the shaping program.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20251128-tc_edt-v2-4-26db48373e73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that test_tc_edt has been integrated in test_progs, remove the
legacy shell script.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20251128-tc_edt-v2-3-26db48373e73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
test_tc_edt.sh uses a pair of veth and a BPF program attached to the TX
veth to shape the traffic to 5MBps. It then checks that the amount of
received bytes (at interface level), compared to the TX duration, indeed
matches 5Mbps.
Convert this test script to the test_progs framework:
- keep the double veth setup, isolated in two veths
- run a small tcp server, and connect client to server
- push a pre-configured amount of bytes, and measure how much time has
been needed to push those
- ensure that this rate is in a 2% error margin around the target rate
This two percent value, while being tight, is hopefully large enough to
not make the test too flaky in CI, while also turning it into a small
example of BPF-based shaping.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20251128-tc_edt-v2-2-26db48373e73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The test_tc_edt BPF program uses a custom section name, which works fine
when manually loading it with tc, but prevents it from being loaded with
libbpf.
Update the program section name to "tc" to be able to manipulate it with
a libbpf-based C test.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20251128-tc_edt-v2-1-26db48373e73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add stats to observe the success and failure rate of lock acquisition
attempts in various contexts.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251128232802.1031906-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The makefile logic to detect if rust is enabled is not working
the way it was expected: instead of using the current setup
for CONFIG_RUST, it uses a cached version from a previous build.
The root cause is that the current logic inside docs/Makefile
uses a cached version of CONFIG_RUST, from the last time a non
documentation target was executed. That's perfectly fine for
Sphinx build, as it doesn't need to read or depend on any
CONFIG_*.
So, instead of relying at the cache, move the logic to the
wrapper script and let it check the current content of .config,
to verify if CONFIG_RUST was selected.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <c06b1834ef02099735c13ee1109fa2a2b9e47795.1763722971.git.mchehab+huawei@kernel.org>
|
|
Correct grammar, spelling, and punctuation in comments, strings,
print messages, logs.
Change two instances of two spaces between words to just one space.
codespell was used to find misspelled words.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251124041011.3030571-1-rdunlap@infradead.org>
|
|
kdoc is looking for "@value" here, so use that kind of string in the
warning message. The "%value" can be confusing.
This changes:
Warning: drivers/net/wireless/mediatek/mt76/testmode.h:92 Excess enum value '%MT76_TM_ATTR_TX_PENDING' description in 'mt76_testmode_attr'
to this:
Warning: drivers/net/wireless/mediatek/mt76/testmode.h:92 Excess enum value '@MT76_TM_ATTR_TX_PENDING' description in 'mt76_testmode_attr'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251126061752.3497106-1-rdunlap@infradead.org>
|
|
Recognize and ignore __rcu (in struct members), __private (in struct
members), and __always_unused (in function parameters) to prevent
kernel-doc warnings:
Warning: include/linux/rethook.h:38 struct member 'void (__rcu *handler' not described in 'rethook'
Warning: include/linux/hrtimer_types.h:47 Invalid param: enum hrtimer_restart (*__private function)(struct hrtimer *)
Warning: security/ipe/hooks.c:81 function parameter '__always_unused' not described in 'ipe_mmap_file'
Warning: security/ipe/hooks.c:109 function parameter '__always_unused' not described in 'ipe_file_mprotect'
There are more of these (in compiler_types.h, compiler_attributes.h)
that can be added as needed.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251127063117.150384-1-rdunlap@infradead.org>
|
|
Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular
kernel, while the tests consistently pass on a debug kernel. This suggests
a timing-sensitive issue.
To mitigate this, introduce a short sleep before each xvlan_over_bond
connectivity check. The delay helps ensure neighbor and route cache
have fully converged before verifying connectivity.
The sleep interval is kept minimal since check_connection() is invoked
nearly 100 times during the test.
Fixes: 246af950b940 ("selftests: bonding: add macvlan over bond testing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
0) Add sanity check for maximum encapsulations in bridge vlan,
reported by the new AI robot.
1) Move the flowtable path discovery code to its own file, the
nft_flow_offload.c mixes the nf_tables evaluation with the path
discovery logic, just split this in two for clarity.
2) Consolidate flowtable xmit path by using dev_queue_xmit() and the
real device behind the layer 2 vlan/pppoe device. This allows to
inline encapsulation. After this update, hw_ifidx can be removed
since both ifidx and hw_ifidx now point to the same device.
3) Support for IPIP encapsulation in the flowtable, extend selftest
to cover for this new layer 3 offload, from Lorenzo Bianconi.
4) Push down the skb into the conncount API to fix duplicates in the
conncount list for packets with non-confirmed conntrack entries,
this is due to an optimization introduced in d265929930e2
("netfilter: nf_conncount: reduce unnecessary GC").
From Fernando Fernandez Mancera.
5) In conncount, disable BH when performing garbage collection
to consolidate existing behaviour in the conncount API, also
from Fernando.
6) A matching packet with a confirmed conntrack invokes GC if
conncount reaches the limit in an attempt to release slots.
This allows the existing extensions to be used for real conntrack
counting, not just limiting new connections, from Fernando.
7) Support for updating ct count objects in nf_tables, from Fernando.
8) Extend nft_flowtables.sh selftest to send IPv6 TCP traffic,
from Lorenzo Bianconi.
9) Fixes for UAPI kernel-doc documentation, from Randy Dunlap.
* tag 'nf-next-25-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: improve UAPI kernel-doc comments
netfilter: ip6t_srh: fix UAPI kernel-doc comments format
selftests: netfilter: nft_flowtable.sh: Add the capability to send IPv6 TCP traffic
netfilter: nft_connlimit: add support to object update operation
netfilter: nft_connlimit: update the count if add was skipped
netfilter: nf_conncount: make nf_conncount_gc_list() to disable BH
netfilter: nf_conncount: rework API to use sk_buff directly
selftests: netfilter: nft_flowtable.sh: Add IPIP flowtable selftest
netfilter: flowtable: Add IPIP tx sw acceleration
netfilter: flowtable: Add IPIP rx sw acceleration
netfilter: flowtable: use tuple address to calculate next hop
netfilter: flowtable: remove hw_ifidx
netfilter: flowtable: inline pppoe encapsulation in xmit path
netfilter: flowtable: inline vlan encapsulation in xmit path
netfilter: flowtable: consolidate xmit path
netfilter: flowtable: move path discovery infrastructure to its own file
netfilter: flowtable: check for maximum number of encapsulations in bridge vlan
====================
Link: https://patch.msgid.link/20251128002345.29378-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a lint target to run yamllint on the YNL specs.
make -C tools/net/ynl lint
make: Entering directory '/home/donaldh/net-next/tools/net/ynl'
yamllint ../../../Documentation/netlink/specs/*.yaml
../../../Documentation/netlink/specs/ethtool.yaml
1272:21 warning truthy value should be one of [false, true] (truthy)
make: Leaving directory '/home/donaldh/net-next/tools/net/ynl'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a --validate flag to pyynl for explicit schema check with error
reporting and add a schema_check make target to check all YNL specs.
make -C tools/net/ynl schema_check
make: Entering directory '/home/donaldh/net-next/tools/net/ynl'
ok 1 binder.yaml schema validation
not ok 2 conntrack.yaml schema validation
'labels mask' does not match '^[0-9a-z-]+$'
Failed validating 'pattern' in schema['properties']['attribute-sets']['items']['properties']['attributes']['items']['properties']['name']:
{'type': 'string', 'pattern': '^[0-9a-z-]+$'}
On instance['attribute-sets'][14]['attributes'][22]['name']:
'labels mask'
ok 3 devlink.yaml schema validation
[...]
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
runqslower was added in commit 9c01546d26d2 "tools/bpf: Add runqslower
tool to tools/bpf" as a BCC port to showcase early BPF CO-RE + libbpf
workflows. runqslower continues to live in BCC (libbpf-tools), so there
is no need to keep building and maintaining it.
Drop tools/bpf/runqslower and remove all build hooks in tools/bpf and
selftests accordingly.
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Link: https://lore.kernel.org/r/20251126093821.373291-1-hoyeon.lee@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
file_alloc_security hook is disabled. Use other LSM hooks in selftests
instead.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20251126202927.2584874-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The original implementation added a hack to check_mem_access()
to prevent programs from writing into insn arrays. To get rid
of this hack, enforce BPF_F_RDONLY_PROG on map creation.
Also fix the corresponding selftest, as the error message changes
with this patch.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20251128063224.1305482-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
* for-next/sysreg:
: arm64 sysreg updates/cleanups
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64/sysreg: Add ICH_VMCR_EL2
arm64/sysreg: Move generation of RES0/RES1/UNKN to function
arm64/sysreg: Support feature-specific fields with 'Prefix' descriptor
arm64/sysreg: Fix checks for incomplete sysreg definitions
arm64/sysreg: Replace TCR_EL1 field macros
|
|
'for-next/efi-preempt', 'for-next/assembler-macro', 'for-next/typos', 'for-next/sme-ptrace-disable', 'for-next/local-tlbi-page-reused', 'for-next/mpam', 'for-next/acpi' and 'for-next/documentation', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arch_topology: Provide a stub topology_core_has_smt() for !CONFIG_GENERIC_ARCH_TOPOLOGY
perf/arm-ni: Fix and optimise register offset calculation
perf: arm_pmuv3: Add new Cortex and C1 CPU PMUs
perf: arm_cspmu: fix error handling in arm_cspmu_impl_unregister()
perf/arm-ni: Add NoC S3 support
perf/arm_cspmu: nvidia: Add pmevfiltr2 support
perf/arm_cspmu: nvidia: Add revision id matching
perf/arm_cspmu: Add pmpidr support
perf/arm_cspmu: Add callback to reset filter config
perf: arm_pmuv3: Don't use PMCCNTR_EL0 on SMT cores
* for-next/misc:
: Miscellaneous patches
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
arm64: mm: make linear mapping permission update more robust for patial range
arm64/mm: Elide TLB flush in certain pte protection transitions
arm64/mm: Rename try_pgd_pgtable_alloc_init_mm
arm64/mm: Allow __create_pgd_mapping() to propagate pgtable_alloc() errors
arm64: add unlikely hint to MTE async fault check in el0_svc_common
arm64: acpi: add newline to deferred APEI warning
arm64: entry: Clean out some indirection
arm64/mm: Ensure PGD_SIZE is aligned to 64 bytes when PA_BITS = 52
arm64/mm: Drop cpu_set_[default|idmap]_tcr_t0sz()
arm64: remove unused ARCH_PFN_OFFSET
arm64: use SOFTIRQ_ON_OWN_STACK for enabling softirq stack
arm64: Remove assertion on CONFIG_VMAP_STACK
* for-next/kselftest:
: arm64 kselftest patches
kselftest/arm64: Align zt-test register dumps
* for-next/efi-preempt:
: arm64: Make EFI calls preemptible
arm64/efi: Call EFI runtime services without disabling preemption
arm64/efi: Move uaccess en/disable out of efi_set_pgd()
arm64/efi: Drop efi_rt_lock spinlock from EFI arch wrapper
arm64/fpsimd: Permit kernel mode NEON with IRQs off
arm64/fpsimd: Don't warn when EFI execution context is preemptible
efi/runtime-wrappers: Keep track of the efi_runtime_lock owner
efi: Add missing static initializer for efi_mm::cpus_allowed_lock
* for-next/assembler-macro:
: arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
* for-next/typos:
: Random typo/spelling fixes
arm64: Fix double word in comments
arm64: Fix typos and spelling errors in comments
* for-next/sme-ptrace-disable:
: Support disabling streaming mode via ptrace on SME only systems
kselftest/arm64: Cover disabling streaming mode without SVE in fp-ptrace
kselftst/arm64: Test NT_ARM_SVE FPSIMD format writes on non-SVE systems
arm64/sme: Support disabling streaming mode via ptrace on SME only systems
* for-next/local-tlbi-page-reused:
: arm64, mm: avoid TLBI broadcast if page reused in write fault
arm64, tlbflush: don't TLBI broadcast if page reused in write fault
mm: add spurious fault fixing support for huge pmd
* for-next/mpam: (34 commits)
: Basic Arm MPAM driver (more to follow)
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
arm_mpam: Use long MBWU counters if supported
arm_mpam: Probe for long/lwd mbwu counters
arm_mpam: Consider overflow in bandwidth counter state
arm_mpam: Track bandwidth counter state for power management
arm_mpam: Add mpam_msmon_read() to read monitor value
arm_mpam: Add helpers to allocate monitors
arm_mpam: Probe and reset the rest of the features
arm_mpam: Allow configuration to be applied and restored during cpu online
arm_mpam: Use a static key to indicate when mpam is enabled
arm_mpam: Register and enable IRQs
arm_mpam: Extend reset logic to allow devices to be reset any time
arm_mpam: Add a helper to touch an MSC from any CPU
arm_mpam: Reset MSC controls from cpuhp callbacks
arm_mpam: Merge supported features during mpam_enable() into mpam_class
arm_mpam: Probe the hardware features resctrl supports
arm_mpam: Add helpers for managing the locking around the mon_sel registers
...
* for-next/acpi:
: arm64 acpi updates
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
* for-next/documentation:
: arm64 Documentation updates
Documentation/arm64: Fix the typo of register names
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control changes for 6.19-rc1 from Daniel Lezcano:
"- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS in the R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for the QCom Tsens (Gaurav Kohli)
- Add the support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)
* tag 'thermal-v6.19-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit
dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module
dt-bindings: thermal: tsens: Add QCS8300 compatible
dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
tools/thermal/thermal-engine: Fix format string bug in thermal-engine
thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment
dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU
|
|
traffic
Introduce the capability to send TCP traffic over IPv6 to
nft_flowtable netfilter selftest.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Introduce specific selftest for IPIP flowtable SW acceleration in
nft_flowtable.sh
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Conflicts:
net/xdp/xsk.c
0ebc27a4c67d ("xsk: avoid data corruption on cq descriptor number")
8da7bea7db69 ("xsk: add indirect call for xsk_destruct_skb")
30ed05adca4a ("xsk: use a smaller new lock for shared pool case")
https://lore.kernel.org/20251127105450.4a1665ec@canb.auug.org.au
https://lore.kernel.org/eb4eee14-7e24-4d1b-b312-e9ea738fefee@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In test_clidr() if an empty cache level is not found then the TEST_ASSERT
will not fire. Fix this by considering all 7 possible levels when iterating
through the hierarchy. Found by inspection.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
ARM64_FEATURE_FIELD_BITS is set to 4 but not all ID register fields are 4
bits. See for instance ID_AA64SMFR0_EL1. The last user of this define,
ARM64_FEATURE_FIELD_BITS, is the set_id_regs selftest. Its logic assumes
the fields aren't a single bits; assert that's the case and stop using the
define. As there are no more users, ARM64_FEATURE_FIELD_BITS is removed
from the arm64 tools sysreg.h header. A separate commit removes this from
the kernel version of the header.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The unix_connreset.c test included <stdlib.h>, but no symbol from that
header is used. This causes a fatal build error under certain
linux-next configurations where stdlib.h is not available.
Remove the unused include to fix the build.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202511221800.hcgCKvVa-lkp@intel.com/
Signed-off-by: Sunday Adelodun <adelodunolaoluwa@yahoo.com>
Link: https://patch.msgid.link/20251125113648.25903-1-adelodunolaoluwa@yahoo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Building objtool with disassembly support can fail when including
the bdf.h file:
In file included from tools/objtool/include/objtool/arch.h:108,
from check.c:14:
/usr/include/bfd.h:35:2: error: #error config.h must be included before this header
35 | #error config.h must be included before this header
| ^~~~~
This check is present in the bfd.h file generated from the binutils
source code, but it is not necessarily present in the bfd.h file
provided in a binutil package (for example, it is not present in
the binutil RPM).
The solution to this issue is to define the PACKAGE macro before
including bfd.h. This is the solution suggested by the binutil
developer in bug 14243, and it is used by other kernel tools
which also use bfd.h (perf and bpf).
Fixes: 59953303827ec ("objtool: Disassemble code with libopcodes instead of running objdump")
Closes: https://lore.kernel.org/all/3fa261fd-3b46-4cbe-b48d-7503aabc96cb@oracle.com/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=14243
Link: https://patch.msgid.link/20251126134519.1760889-1-alexandre.chartre@oracle.com
|
|
Add a test framework for YAML Netlink (YNL) tools, covering both CLI and
ethtool functionality. The framework includes:
1) cli: family listing, netdev, ethtool, rt-* families, and nlctrl
operations
2) ethtool: device info, statistics, ring/coalesce/pause parameters, and
feature gettings
The current YNL syntax is a bit obscure, and end users may not always know
how to use it. This test framework provides usage examples and also serves
as a regression test to catch potential breakages caused by future changes.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251124022055.33389-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The --send_omit_free flag is needed for TCP zero copy tests, to ensure
that packetdrill doesn't free the send() buffer after the send() call.
Fixes: 1e42f73fd3c2 ("selftests/net: packetdrill: import tcp/zerocopy")
Closes: https://lore.kernel.org/netdev/20251124071831.4cbbf412@kernel.org/
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251125234029.1320984-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
char variable in 'so_txtime.c' & 'txtimestamp.c' were left uninitilized
when switch default case taken. which raises following warning.
txtimestamp.c:240:2: warning: variable 'tsname' is used uninitialized
whenever switch default is taken [-Wsometimes-uninitialized]
so_txtime.c:210:3: warning: variable 'reason' is used uninitialized
whenever switch default is taken [-Wsometimes-uninitialized]
initializing these variables to NULL to fix this.
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Link: https://patch.msgid.link/20251125165302.20079-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"8 hotfixes. 4 are cc:stable, 7 are against mm/.
All are singletons - please see the respective changelogs for details"
* tag 'mm-hotfixes-stable-2025-11-26-11-51' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/filemap: fix logic around SIGBUS in filemap_map_pages()
mm/huge_memory: fix NULL pointer deference when splitting folio
MAINTAINERS: add test_kho to KHO's entry
mailmap: add entry for Sam Protsenko
selftests/mm: fix division-by-zero in uffd-unit-tests
mm/mmap_lock: reset maple state on lock_vma_under_rcu() retry
mm/memfd: fix information leak in hugetlb folios
mm: swap: remove duplicate nr_swap_pages decrement in get_swap_page_of_type()
|
|
so_peek_off.c is reported to be flaky on NIPA:
# # so_peek_off.c:149:two_chunks_overlap_blocking:Expected -1 (-1) != bytes (-1)
# # two_chunks_overlap_blocking: Test terminated by assertion
# # FAIL so_peek_off.stream.two_chunks_overlap_blocking
The test fork()s a child process to send() data after 1ms to
wake up the parent process being blocked (up to 3ms) on recv().
But, from the log, the parent woke up after 3ms timeout, so it
could be too short when the host is overloaded.
Let's extend it to 5s.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251124070722.1e828c53@kernel.org/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124212805.486235-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Somehow AF_UNIX tests have reused ../.gitignore,
but now NIPA warns about it.
Let's create .gitignore under af_unix/.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124212805.486235-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now sk->sk_timer is no longer used by TCP keepalive, we can use
its storage for TCP and MPTCP retransmit timers for better
cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk->sk_timer has been used for TCP keepalives.
Keepalive timers are not in fast path, we want to use sk->sk_timer
storage for retransmit timers, for better cache locality.
Create icsk->icsk_keepalive_timer and change keepalive
code to no longer use sk->sk_timer.
Added space is reclaimed in the following patch.
This includes changes to MPTCP, which was also using sk_timer.
Alias icsk->mptcp_tout_timer and icsk->icsk_keepalive_timer
for inet_sk_diag_fill() sake.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251124175013.1473655-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a comment on regeneration to the generated files.
The comment is placed after the YNL-GEN line[1], as to not interfere
with ynl-regen.sh's detection logic.
[1] and after the optional YNL-ARG line.
Link: https://lore.kernel.org/r/aR5m174O7pklKrMR@zx2c4.com/
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251120174429.390574-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds a new CLI argument for overriding the default
function prefix, as used for naming the doit/dumpit functions
in the generated kernel code.
When not specified the default "$(FAMILY)-nl" is used.
This can also be specified persistently in generated files:
/* YNL-ARG --function-prefix wg */
In the above example it causes the following changes:
wireguard_nl_get_device_dumpit() -> wg_get_device_dumpit()
wireguard_nl_get_device_doit() -> wg_get_device_doit()
The variable name fn_prefix, was chosen as it relates to op_prefix
which is used to prefix the UAPI commands enum entries.
Link: https://lore.kernel.org/r/aRvWzC8qz3iXDAb3@zx2c4.com/
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20251120174429.390574-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller reported a lockdep lock order inversion warning[1] due to
commit 687aa0c5581b ("vsock: Fix transport_* TOCTOU"). This was fixed in
commit f7c877e75352 ("vsock: fix lock inversion in
vsock_assign_transport()").
Redo syzkaller's repro by piggybacking on a somewhat related test
implemented in commit 3a764d93385c ("vsock/test: Add test for null ptr
deref when transport changes").
[1]: https://lore.kernel.org/netdev/68f6cdb0.a70a0220.205af.0039.GAE@google.com/
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251123-vsock_test-linger-lockdep-warn-v1-1-4b1edf9d8cdc@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow users to configure the critical section delay for both task/normal
and NMI contexts, and set to 20ms and 10ms as before by default.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251125020749.2421610-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add statistics per-CPU broken down by context and various timing windows
for the time taken to acquire an rqspinlock. Cases where all
acquisitions fit into the 10ms window are skipped from printing,
otherwise the full breakdown is displayed when printing the summary.
This allows capturing precisely the number of times outlier attempts
happened for a given lock in a given context.
A critical detail is that time is captured regardless of success or
failure, which is important to capture events for failed but long
waiting timeout attempts.
Output:
[ 64.279459] rqspinlock acquisition latency histogram (ms):
[ 64.279472] cpu1: total 528426 (normal 526559, nmi 1867)
[ 64.279477] 0-1ms: total 524697 (normal 524697, nmi 0)
[ 64.279480] 2-2ms: total 3652 (normal 1811, nmi 1841)
[ 64.279482] 3-3ms: total 66 (normal 47, nmi 19)
[ 64.279485] 4-4ms: total 2 (normal 1, nmi 1)
[ 64.279487] 5-5ms: total 1 (normal 1, nmi 0)
[ 64.279489] 6-6ms: total 1 (normal 0, nmi 1)
[ 64.279490] 101-150ms: total 1 (normal 0, nmi 1)
[ 64.279492] >= 251ms: total 6 (normal 2, nmi 4)
...
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251125020749.2421610-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Only require 2 CPUs for AA, 3 for ABBA, 4 for ABBCCA, which is
calculated nicely by adding to the mode enum. Enables running single CPU
AA tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251125020749.2421610-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix up some of missing or incorrect @param descriptions for libbpf public APIs
in libbpf.h.
Signed-off-by: Jianyun Gao <jianyungao89@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251118033025.11804-1-jianyungao89@gmail.com
|
|
The bench test "trig-kernel-count" can be used as a baseline comparison
for fentry and other benchmarks, and the calling to bpf_get_numa_node_id()
should be considered as composition of the baseline. So, let's call it in
trigger_count(). Meanwhile, rename trigger_count() to
trigger_kernel_count() to make it easier understand.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251116014242.151110-1-dongml2@chinatelecom.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull a cpupower utility update for 6.19-rc1 from Shuah Khan:
"Adds support for building libcpupower statically when STATIC=true is
specified during build."
* tag 'linux-cpupower-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
tools/power/cpupower: Support building libcpupower statically
|
|
The error message in the daemon() failure path uses %p format specifier
without providing a corresponding pointer argument, resulting in undefined
behavior and printing garbage values.
Replace %p with %m to properly print the errno error message, which is
the intended behavior when daemon() fails.
This fix ensures proper error reporting when daemonization fails.
Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20251124104401.374856-1-mrout@redhat.com
|
|
netdev CI reserves SKIP in selftests for cases which can't be executed
due to setup issues, like missing or old commands. Tests which are
expected to fail must use XFAIL.
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251123021601.158709-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit ensures that the required log level is set at the start of
the test iteration.
Part of the cleanup performed at the end of each test iteration resets
the log level (do_cleanup in lib_netcons.sh) to the values defined at the
time test script started. This may cause further test iterations to fail
if the default values are not sufficient.
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-netcons-basic-loglevel-v1-1-577f8586159c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Increase the receiver timeout. When running between machines
in different geographic regions the test needs more than
a second to SSH across and send the frames.
The bkg() command that runs the receiver defaults to 5 sec timeout,
so using 4 sec sounds like a reasonable value for the receiver itself.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the simple modulo math with the real indirection table
read from the device. This makes the tests pass for mlx5 and
bnxt NICs.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that we have YNL support for RSS accessing the RSS info from
C is very easy. Instead of passing the RSS key from Python do it
directly in the C code.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure that the NIC under test is configured for pure Toeplitz
hashing, and no input key transform (no symmetric hashing).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Looks like the liburing is not updated by distros very aggressively.
Presumably because a lot of packages depend on it. I just updated
to Fedora 43 and it's still on liburing 2.9. The test is 9mo old,
at this stage I think this warrants handling the build failure
more gracefully.
Detect if iouring is recent enough and if not print a warning
and exclude the C prog from build. The Python test will just
fail since the binary won't exist. But it removes the major
annoyance of having to update liburing from sources when
developing other tests.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 31158ad02ddb ("rqspinlock: Add deadlock detection
and recovery") the updated path on re-entrancy now reports deadlock
via -EDEADLK instead of the previous -EBUSY.
Also, the way reentrancy was exercised (via fentry/lookup_elem_raw)
has been fragile because lookup_elem_raw may be inlined
(find_kernel_btf_id() will return -ESRCH).
To fix this fentry is attached to bpf_obj_free_fields() instead of
lookup_elem_raw() and:
- The htab map is made to use a BTF-described struct val with a
struct bpf_timer so that check_and_free_fields() reliably calls
bpf_obj_free_fields() on element replacement.
- The selftest is updated to do two updates to the same key (insert +
replace) in prog_test.
- The selftest is updated to align with expected errno with the
kernel’s current behavior.
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://lore.kernel.org/r/20251117060752.129648-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit 4dfd4bba8578 ("selftests/mm/uffd: refactor non-composite global
vars into struct") moved some of the operations previously implemented in
uffd_setup_environment() earlier in the main test loop.
The calculation of nr_pages, which involves a division by page_size, now
occurs before checking that default_huge_page_size() returns a non-zero
This leads to a division-by-zero error on systems with !CONFIG_HUGETLB.
Fix this by relocating the non-zero page_size check before the nr_pages
calculation, as it was originally implemented.
Link: https://lkml.kernel.org/r/20251113034623.3127012-1-cmllamas@google.com
Fixes: 4dfd4bba8578 ("selftests/mm/uffd: refactor non-composite global vars into struct")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Static analysis found an issue in pfrut.c
cppcheck output before this patch:
tools/power/acpi/tools/pfrut/pfrut.c:225:3: error: Resource leak: fd_update [resourceLeak]
tools/power/acpi/tools/pfrut/pfrut.c:269:3: error: Resource leak: fd_update [resourceLeak]
tools/power/acpi/tools/pfrut/pfrut.c:269:3: error: Resource leak: fd_update_log [resourceLeak]
tools/power/acpi/tools/pfrut/pfrut.c:365:4: error: Memory leak: addr_map_capsule [memleak]
tools/power/acpi/tools/pfrut/pfrut.c:424:4: error: Memory leak: log_buf [memleak]
cppcheck output after this patch:
No resource leaks found
Fix by closing file descriptors and freeing allocated memory.
Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Link: https://patch.msgid.link/20251120170001.251968-1-mrout@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When disassembling alternatives replace trailing NOPs with a single
indication of the number of bytes covered with NOPs.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-31-alexandre.chartre@oracle.com
|
|
Add the --wide option to provide a wide output when disassembling.
With this option, the disassembly of alternatives is displayed
side-by-side instead of one above the other.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-30-alexandre.chartre@oracle.com
|
|
When disassembling, if an instruction has alternatives which are all
made of a single instruction then print each alternative on a single
line (instruction + description) so that the output is more compact.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-29-alexandre.chartre@oracle.com
|
|
Improve the naming of group alternatives by showing the feature name and
flags used by the alternative.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-28-alexandre.chartre@oracle.com
|
|
Add a function to get the name of a CPU feature. The function is
architecture dependent and currently only implemented for x86. The
feature names are automatically generated from the cpufeatures.h
include file.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-27-alexandre.chartre@oracle.com
|
|
Currently selftests require xxd with the "-n <name>" option
which allows the user to specify a name not derived from
the input object path. Instead of relying on this newer
feature, older xxd can be used if we link our desired name
("test_progs_verification_cert") to the input object.
Many distros ship xxd in vim-common package and do not have
the latest xxd with -n support.
Fixes: b720903e2b14d ("selftests/bpf: Enable signature verification for some lskel tests")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20251120084754.640405-3-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ERR_get_error_all()[1] is a openssl v3 API, so to make code
compatible with openssl v1 utilize ERR_get_err_line_data
instead. Since openssl is already a build requirement for
the kernel (minimum requirement openssl 1.0.0), this will
allow bpftool to compile where opensslv3 is not available.
Signing-related BPF selftests pass with openssl v1.
[1] https://docs.openssl.org/3.4/man3/ERR_get_error/
Fixes: 40863f4d6ef2 ("bpftool: Add support for signing BPF programs")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20251120084754.640405-2-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Correct the MIPS RISC-V/JEDEC vendor ID
- Fix the system shutdown behavior in the legacy case where
CONFIG_RISCV_SBI_V01 is set, but the firmware implementation
doesn't support the older v0.1 system shutdown method
- Align some tools/ macro definitions with the corresponding
kernel headers
* tag 'riscv-for-linus-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
tools: riscv: Fixed misalignment of CSR related definitions
riscv: sbi: Prefer SRST shutdown over legacy
riscv: Update MIPS vendor id to 0x127
|
|
If the linker emits warnings these should abort the build.
Otherwise they will be swallowed by run-tests.sh and not shown.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
LLVM 21 switched to -mcmodel=medium for LoongArch64 compilations.
This code model uses R_LARCH_ECALL36 relocations which might not be
supported by GNU ld which to nolibc testsuite uses by default.
ld will not resolve the relocation and all function calls will end up
as busy loops.
Use lld instead.
We can not switch to lld for all LLVM builds, as it does not support all
necessary architectures.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
As verifier now supports nested rcu critical sections, add new test
cases to make sure unbalanced usage of rcu_read_lock()/unlock() is
rejected.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251117200411.25563-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, nested rcu critical sections are rejected by the verifier and
rcu_lock state is managed by a boolean variable. Add support for nested
rcu critical sections by make active_rcu_locks a counter similar to
active_preempt_locks. bpf_rcu_read_lock() increments this counter and
bpf_rcu_read_unlock() decrements it, MEM_RCU -> PTR_UNTRUSTED transition
happens when active_rcu_locks drops to 0.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251117200411.25563-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A new test is added: caller_stack_write_tail_call tests that the live
stack is correctly tracked for a tail call.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu>
Link: https://lore.kernel.org/r/20251119160355.1160932-5-martin.teichmann@xfel.eu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Three tests are added:
- invalidate_pkt_pointers_by_tail_call checks that one can use the
packet pointer after a tail call. This was originally possible
and also poses not problems, but was made impossible by 1a4607ffba35.
- invalidate_pkt_pointers_by_static_tail_call tests a corner case
found by Eduard Zingerman during the discussion of the original fix,
which was broken in that fix.
- subprog_result_tail_call tests that precision propagation works
correctly across tail calls. This did not work before.
Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251119160355.1160932-3-martin.teichmann@xfel.eu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
commit 603b44162325 ("bpf: Update the bpf_prog_calc_tag to use SHA256")
changed digest of prog_tag to SHA256 but forgot to update tests
correspondingly. Fix it.
Fixes: 603b44162325 ("bpf: Update the bpf_prog_calc_tag to use SHA256")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
Link: https://lore.kernel.org/r/20251121061458.3145167-1-higuoxing@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, test_perf_branches_no_hw() relies on the busy loop within
test_perf_branches_common() being slow enough to allow at least one
perf event sample tick to occur before starting to tear down the
backing perf event BPF program. With a relatively small fixed
iteration count of 1,000,000, this is not guaranteed on modern fast
CPUs, resulting in the test run to subsequently fail with the
following:
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:PASS:output not valid 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_stack 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_global 0 nsec
check_good_sample:PASS:read_branches_size 0 nsec
test_perf_branches_no_hw:PASS:perf_event_open 0 nsec
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_bad_sample:FAIL:output not valid no valid sample from prog
Summary: 0/1 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
On a modern CPU (i.e. one with a 3.5 GHz clock rate), executing 1
million increments of a volatile integer can take significantly less
than 1 millisecond. If the spin loop and detachment of the perf event
BPF program elapses before the first 1 ms sampling interval elapses,
the perf event will never end up firing. Fix this by bumping the loop
iteration counter a little within test_perf_branches_common(), along
with ensuring adding another loop termination condition which is
directly influenced by the backing perf event BPF program
executing. Notably, a concious decision was made to not adjust the
sample_freq value as that is just not a reliable way to go about
fixing the problem. It effectively still leaves the race window open.
Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251119143540.2911424-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Gracefully skip the test_perf_branches_hw subtest on platforms that
do not support LBR or require specialized perf event attributes
to enable branch sampling.
For example, AMD's Milan (Zen 3) supports BRS rather than traditional
LBR. This requires specific configurations (attr.type = PERF_TYPE_RAW,
attr.config = RETIRED_TAKEN_BRANCH_INSTRUCTIONS) that differ from the
generic setup used within this test. Notably, it also probably doesn't
hold much value to special case perf event configurations for selected
micro architectures.
Fixes: 67306f84ca78c ("selftests/bpf: Add bpf_read_branch_records() selftest")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251120142059.2836181-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
arm64 JIT now supports gotox instruction and jumptables, so run tests in
verifier_gotox.c for arm64.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20251117130732.11107-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The select_reuseport selftest uses a custom sa46 union to represent
IPv4 and IPv6 addresses. This custom wrapper requires extra manual
handling for address family and field extraction.
Replace sa46 with sockaddr_storage and update the helper functions to
operate on native socket structures. This simplifies the code and
removes unnecessary custom address-handling logic. No functional
changes intended.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251121081332.2309838-3-hoyeon.lee@suse.com
|
|
The cls_redirect test uses a custom addr_port/tuple wrapper to represent
IPv4/IPv6 addresses and ports. This custom wrapper requires extra
conversion logic and specific helpers such as fill_addr_port(), which
are no longer necessary when using standard socket address structures.
This commit replaces addr_port/tuple with the standard sockaddr_storage
so test handles address families and ports using native socket types.
It removes the custom helper, eliminates redundant casts, and simplifies
the setup helpers without functional changes. set_up_conn() and
build_input() now take src/dst sockaddr_storage directly.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251121081332.2309838-2-hoyeon.lee@suse.com
|
|
Now that this was rewritten in Python, we can remove the old
tool.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <1f53e0fa48616af189ce98b45a65cc0c245e7aaf.1763492868.git.mchehab+huawei@kernel.org>
|
|
As we want to call Python code directly at the Sphinx extension,
convert get_feat.pl to Python.
The code was made to be (almost) bug-compatible with the Perl
version, with two exceptions:
1. Currently, Perl script outputs a wrong table if arch is set
to a non-existing value;
2. the ReST table output when --feat is used without --arch
has an invalid format, as the number of characters for the
table delimiters are wrong.
Those two bugs were fixed while testing the conversion.
Additionally, another caveat was solved:
the output when --feat is used without arch and the feature
doesn't exist doesn't contain an empty table anymore.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <03c26cee1ec567804735a33047e625ef5ab7bfa8.1763492868.git.mchehab+huawei@kernel.org>
|
|
Each alternative of a group alternative depends on a specific
feature and flags. Provide access to the feature/flags for each
alternative as an attribute (feature) in struct alt_group.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-26-alexandre.chartre@oracle.com
|
|
When using the --disas option, alternatives are disassembled but
address references in non-default alternatives can be incorrect.
The problem is that alternatives are shown as if they were replacing the
original code of the alternative. So if an alternative is referencing
an address inside the alternative then the reference has to be
adjusted to the location of the original code.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-25-alexandre.chartre@oracle.com
|
|
When using the --disas option, also disassemble jump tables.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-24-alexandre.chartre@oracle.com
|
|
When using the --disas option, also disassemble exception tables
(EX_TABLE).
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-23-alexandre.chartre@oracle.com
|
|
All alternatives are disassemble side-by-side when using the --disas
option. However the address of each instruction is not printed because
instructions from different alternatives are not necessarily aligned.
Change this behavior to print the address of each instruction. Spaces
will appear between instructions from the same alternative when
instructions from different alternatives do not have the same alignment.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-22-alexandre.chartre@oracle.com
|
|
When using the --disas option, disassemble all group alternatives.
Jump tables and exception tables (which are handled as alternatives)
are not disassembled at the moment.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-21-alexandre.chartre@oracle.com
|
|
When using the --disas option, objtool doesn't currently disassemble
any alternative. Print an header for each alternative. This identifies
places where alternatives are present but alternative code is still
not disassembled at the moment.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-20-alexandre.chartre@oracle.com
|
|
Preserve the order in which alternatives are defined. Currently
objtool stores alternatives in a list in reverse order.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-19-alexandre.chartre@oracle.com
|
|
Add the --disas=<function-pattern> actions to disassemble the specified
functions. The function pattern can be a single function name (e.g.
--disas foo to disassemble the function with the name "foo"), or a shell
wildcard pattern (e.g. --disas foo* to disassemble all functions with a
name starting with "foo").
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-18-alexandre.chartre@oracle.com
|
|
The .return_sites and .call_sites sections reference text addresses,
but not with the intent to indirect branch to them, so they don't
need to be validated for IBT.
This is useful when running objtool on object files which already
have .return_sites or .call_sites sections, for example to re-run
objtool after it has reported an error or a warning.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-17-alexandre.chartre@oracle.com
|
|
When tracing function validation, improve the reporting of
alternative instruction by more clearly showing the different
alternatives beginning and end.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-16-alexandre.chartre@oracle.com
|
|
Add the disas_alt_name() and disas_alt_type_name() to provide a
name and a type name for an alternative. This will be used to
better name alternatives when tracing their execution.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-15-alexandre.chartre@oracle.com
|
|
Alternative code, including jump table and exception table, is represented
with the same struct alternative structure. But there is no obvious way to
identify whether the struct represents alternative instructions, a jump
table or an exception table.
So add a type to struct alternative to clearly identify the type of
alternative.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-14-alexandre.chartre@oracle.com
|
|
When tracing function validation, instruction state changes can
report changes involving registers. These registers are reported
with the name "r<num>" (e.g. "r3"). Print the CPU specific register
name instead of a generic name (e.g. print "rbx" instead of "r3"
on x86).
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-13-alexandre.chartre@oracle.com
|
|
During function validation, objtool maintains a per-instruction state,
in particular to track call frame information. When tracing validation,
print any instruction state changes.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-12-alexandre.chartre@oracle.com
|
|
Add an option to trace and have information during the validation
of specified functions. Functions are specified with the --trace
option which can be a single function name (e.g. --trace foo to
trace the function with the name "foo"), or a shell wildcard
pattern (e.g. --trace foo* to trace all functions with a name
starting with "foo").
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-11-alexandre.chartre@oracle.com
|
|
Keep track of the maximum length of symbol names. This will help
formatting the code flow between different functions.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-10-alexandre.chartre@oracle.com
|
|
The code to validate a branch loops through all instructions of the
branch and validate each instruction. Move the code to validate an
instruction to a separated function.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-9-alexandre.chartre@oracle.com
|
|
When an instruction warning (WARN_INSN) or backtrace (BT_INSN) is issued,
disassemble the instruction to provide more context.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-8-alexandre.chartre@oracle.com
|
|
When disassembling an instruction store the result instead of directly
printing it.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-7-alexandre.chartre@oracle.com
|
|
Print symbols referenced during disassembly instead of just printing
raw addresses. Also handle address relocation.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-6-alexandre.chartre@oracle.com
|
|
Remove the newline which is printed during feature discovery
when nothing else is printed.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-5-alexandre.chartre@oracle.com
|
|
objtool executes the objdump command to disassemble code. Use libopcodes
instead to have more control about the disassembly scope and output.
If libopcodes is not present then objtool is built without disassembly
support.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-4-alexandre.chartre@oracle.com
|
|
Create a structure to store information for disassembling functions.
For now, it is just a wrapper around an objtool file.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-3-alexandre.chartre@oracle.com
|
|
objtool disassembles functions which have warnings. Move the code
to do that to a dedicated file. The code is just moved, it is not
changed.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/20251121095340.464045-2-alexandre.chartre@oracle.com
|
|
section names"
This reverts commit 9c7dc1dd897a1cdcade9566ea4664b03fbabf4a4.
The check-function-names.sh script now provides the function name
checking functionality for all architectures, making the objtool check
redundant.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/c7d549d4de8bd1490d106b99630eea5efc69a4dd.1763669451.git.jpoimboe@kernel.org
|
|
The .cold function parent/child correlation logic has two passes: one in
read_symbols() and one in add_jump_destinations().
The second pass was added with commit cd77849a69cf ("objtool: Fix GCC 8
cold subfunction detection for aliased functions") to ensure that if the
parent symbol had aliases then the canonical symbol was chosen as the
parent.
That solution was rather clunky, not to mention incomplete due to the
existence of alternatives and switch tables. Now that we have
sym->alias, the canonical alias fix can be done much simpler in the
first pass, making the second pass obsolete.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/bdab245a38000a5407f663a031f39e14c67a43d4.1763671318.git.jpoimboe@kernel.org
|
|
If a symbol has aliases, make add_jump_table_alts() skip the
non-canonical ones to avoid any surprises.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/169aa17564b9aadb74897945ea74ac2eb70c5b13.1763671318.git.jpoimboe@kernel.org
|
|
When symbol alias ambiguity exists in the symbol finding helper
functions, return the canonical sym->alias, as that's the one which gets
used by validate_branch() and elsewhere.
This doesn't fix any known issues, just makes the symbol alias behavior
more robust.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/450470a4897706af77453ad333e18af5ebab653c.1763671318.git.jpoimboe@kernel.org
|
|
Objtool is mistakenly aliasing all undefined symbols. That's obviously
wrong, though it has no consequence since objtool happens to only use
sym->alias for defined symbols. Fix it regardless.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/bc401173a7717757eee672fc1ca5a20451d77b86.1763671318.git.jpoimboe@kernel.org
|
|
The objtool .cold child/parent correlation is done in two phases: first
in elf_add_symbol() and later in add_jump_destinations().
The first phase is rather crude and can pick the wrong parent if there
are duplicates with the same name.
The second phase usually fixes that, but only if the parent has a direct
jump to the child. It does *not* work if the only branch from the
parent to the child is an alternative or jump table entry.
Make the first phase more robust by looking for the parent in the same
STT_FILE as the child.
Fixes the following objtool warnings in an AutoFDO build with a large
CLANG_AUTOFDO_PROFILE profile:
vmlinux.o: warning: objtool: rdev_add_key() falls through to next function rdev_add_key.cold()
vmlinux.o: warning: objtool: rdev_set_default_key() falls through to next function rdev_set_default_key.cold()
Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/82c7b52e40efa75dd10e1c550cc75c1ce10ac2c9.1763671318.git.jpoimboe@kernel.org
|
|
AutoFDO enables -fsplit-machine-functions which can move the cold parts
of a function to a <func>.cold symbol in a .text.split.<func> section.
Unlike GCC, the Clang <func>.cold symbols are not marked STT_FUNC. This
confuses objtool in several ways, resulting in warnings like the
following:
vmlinux.o: warning: objtool: apply_retpolines.cold+0xfc: unsupported instruction in callable function
vmlinux.o: warning: objtool: machine_check_poll.cold+0x2e: unsupported instruction in callable function
vmlinux.o: warning: objtool: free_deferred_objects.cold+0x1f: relocation to !ENDBR: free_deferred_objects.cold+0x26
vmlinux.o: warning: objtool: rpm_idle.cold+0xe0: relocation to !ENDBR: rpm_idle.cold+0xe7
vmlinux.o: warning: objtool: tcp_rcv_state_process.cold+0x1c: relocation to !ENDBR: tcp_rcv_state_process.cold+0x23
Fix it by marking the .cold symbols as STT_FUNC.
Fixes: 2fd65f7afd5a ("AutoFDO: Enable machine function split optimization for AutoFDO")
Closes: https://lore.kernel.org/20251103215244.2080638-2-xur@google.com
Reported-by: Rong Xu <xur@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: xur@google.com
Tested-by: xur@google.com
Link: https://patch.msgid.link/20a67326f04b2a361c031b56d58e8a803b3c5893.1763671318.git.jpoimboe@kernel.org
|
|
Test querying default values and resetting to default values for
netdevsim devlink params.
This should cover the basic paths of interest: driverinit and
non-driverinit cmodes, as well as bool and non-bool value
type. Default param values of type bool are encoded with u8 netlink
type as opposed to flag type, so that userspace can distinguish
"not-present" from false.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251119025038.651131-7-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Increase MAX_USERDATA_ITEMS from 16 to 256 entries now that the userdata
buffer is allocated dynamically.
The previous limit of 16 was necessary because the buffer was statically
allocated for all targets. With dynamic allocation, we can support more
entries without wasting memory on targets that don't use userdata.
This allows users to attach more metadata to their netconsole messages,
which is useful for complex debugging and logging scenarios.
Also update the testcase accordingly.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251119-netconsole_dynamic_extradata-v3-4-497ac3191707@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a sample tool demonstrating how to add, dump, and delete a
flower filter with two VLAN push actions. The example can be
invoked as:
# samples/tc-filter-add p2
flower pref 1 proto: 0x8100
flower:
vlan_id: 100
vlan_prio: 5
num_of_vlans: 3
action order: 1 vlan push id 200 protocol 0x8100 priority 0
action order: 2 vlan push id 300 protocol 0x8100 priority 0
This verifies correct handling of tc action attributes for multiple
VLAN push actions. The tc action indexed arrays start from index 1,
and the index defines the action order. This behavior differs from
the YNL specification, which expects arrays to be zero-based. To
accommodate this, the example adds a dummy action at index 0, which
is ignored by the kernel.
Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Link: https://patch.msgid.link/20251119203618.263780-2-zahari.doychev@linux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gro.sh and toeplitz.sh used to source in one of two setup scripts
depending on whether the test was expected to be run against
veth or a real device. veth testing is replaced by netdevsim
and existing "remote endpoint" support in our Python tests.
Add a script which sets up loopback mode.
The usage is a little bit more complicated than running
the scripts used to be. Testing used to work like this:
./../gro.sh -i eth0 ...
now the "setup script" has to be run explicitly:
NETIF=eth0 ./../ksft_setup_loopback.sh ./../gro.sh
But the functionality itself is retained.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-13-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rewrite the existing toeplitz.sh test in Python. The conversion
is a lot less exact than the GRO one. We use Netlink APIs to
get the device RSS and IRQ information. We expect that the device
has neither RPS nor RFS configured, and set RPS up as part of
the test.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rewrite the existing gro.sh test in Python. The conversion
not exact, the changes are related to integrating the test
with our "remote endpoint" paradigm. The test now reads
the IP addresses from the user config. It resolves the MAC
address (including running over Layer 3 networks).
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're already saving the info about the local dev in env.dev
for the tests, save remote dev as well. This is more symmetric,
env generally provides the same info for local and remote end.
While at it make sure that we reliably get the detailed info
about the local dev. nsim used to read the dev info without -d.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's a common synchronization problem when a script (Python test)
uses a C program to set up some state (usually start a receiving
process for traffic). The script needs to know when the process
has fully initialized. The inverse of the problem exists for shutting
the process down - we need a reliable way to tell the process to exit.
We added helpers to do this safely in
commit 71477137994f ("selftests: drv-net: add a way to wait for a local process")
unfortunately the two operations (wait for init, and shutdown) are
controlled by a single parameter (ksft_wait). Add support for using
ksft_ready without using the second fd for exit.
This is useful for programs which wait for a specific number of packets
to rx so exit_wait is a good match, but we still need to wait for init.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251120021024.2944527-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GRO test can run on a real device or a veth.
The Toeplitz hash test can only run on a real device.
Move them from net/ to drivers/net/ and drivers/net/hw/ respectively.
There are two scripts which set up the environment for these tests
setup_loopback.sh and setup_veth.sh. Move those scripts to net/lib.
The paths to the setup files are a little ugly but they will be
deleted shortly.
toeplitz_client.sh is not a test in itself, but rather a helper
to send traffic, so add it to TEST_FILES rather than TEST_PROGS.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use just-added ksft variants for XDP qstat tests.
While at it correct the number of packets, we're sending
1000 packets now.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's a lot of cases where we try to re-run the same code with
different parameters. We currently need to either use a generator
method or create a "main" case implementation which then gets called
by trivial case functions:
def _test(x, y, z):
...
def case_int():
_test(1, 2, 3)
def case_str():
_test('a', 'b', 'c')
Add support for variants, similar to kselftests_harness.h and
a lot of other frameworks. Variants can be added as decorator
to test functions:
@ksft_variants([(1, 2, 3), ('a', 'b', 'c')])
def case(x, y, z):
...
ksft_run() will auto-generate case names:
case.1_2_3
case.a_b_c
Because the names may not always be pretty (and to avoid forcing
classes to implement case-friendly __str__()) add a wrapper class
KsftNamedVariant which lets the user specify the name for the variant.
Note that ksft_run's args are still supported. ksft_run splices args
and variant params together.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251120021024.2944527-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for adding test variants move the test case
collection logic to a dedicated function. New helper returns
(function, args, name, )
tuples. The main test loop can simply run them, not much
logic or discernment needed.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're about to add more features here and finding new issues with old
ones in place is hard. Address ruff checks:
- bare exceptions
- f-string with no params
- unused import
We need to use BaseException when handling defer(), as Petr points out.
This retains the old behavior of ignoring SIGTERM while running cleanups.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251120021024.2944527-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit e6366101ce1f ("tools/nolibc: remove __nolibc_enosys() fallback
from time64-related functions") removed many of these fallbacks but
forgot a few.
Finish the job.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
As off_t is now always 64-bit wide this overflow can not happen anymore,
remove the check.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
|
|
The kernel uses 64-bit values for file offsets.
Currently these might be truncated to 32-bit when assigned to
nolibc's off_t values.
Switch to 64-bit off_t consistently.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/cec27d94-c99d-4c57-9a12-275ea663dda8@app.fastmail.com/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
Make sure to always use the 64-bit safe system call
in preparation for 64-bit off_t on 32 bit architectures.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
Correctly handle 64-bit off_t values in preparation for 64-bit off_t on
32-bit architectures.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
The kernel uses 64-bit values for inode numbers.
Currently these might be truncated to 32-bit when assigned to
nolibc's ino_t values.
Switch to 64-bit ino_t consistently.
As ino_t is never used directly in kernel ABIs, no systemcall wrappers
need to be adapted.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/cec27d94-c99d-4c57-9a12-275ea663dda8@app.fastmail.com/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
subtest_kmem_cache_iter_check_slabinfo() fundamentally compares slab
cache names parsed out from /proc/slabinfo against those stored within
struct kmem_cache_result. The current problem is that the slab cache
name within struct kmem_cache_result is stored within a bounded
fixed-length array (sized to SLAB_NAME_MAX(32)), whereas the name
parsed out from /proc/slabinfo is not. Meaning, using ASSERT_STREQ()
can certainly lead to test failures, particularly when dealing with
slab cache names that are longer than SLAB_NAME_MAX(32)
bytes. Notably, kmem_cache_create() allows callers to create slab
caches with somewhat arbitrarily sized names via its __name identifier
argument, so exceeding the SLAB_NAME_MAX(32) limit that is in place
now can certainly happen.
Make subtest_kmem_cache_iter_check_slabinfo() more reliable by only
checking up to sizeof(struct kmem_cache_result.name) - 1 using
ASSERT_STRNEQ().
Fixes: a496d0cdc84d ("selftests/bpf: Add a test for kmem_cache_iter")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/20251118073734.4188710-1-mattbobrowski@google.com
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc7).
No conflicts, adjacent changes:
tools/testing/selftests/net/af_unix/Makefile
e1bb28bf13f4 ("selftest: af_unix: Add test for SO_PEEK_OFF.")
45a1cd8346ca ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When cross-compilation is not used, BPFOBJ and HOST_BPFOBJ are identical
files, libbpf.a, and duplicate libbpf.a files should be removed.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPsec and wireless.
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures"
* tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
vsock: Ignore signal/timeout on connect() if already established
be2net: pass wrb_params in case of OS2BMC
l2tp: reset skb control buffer on xmit
net: dsa: microchip: lan937x: Fix RGMII delay tuning
selftests: mptcp: add a check for 'add_addr_accepted'
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
selftests: mptcp: join: userspace: longer timeout
selftests: mptcp: join: endpoints: longer timeout
selftests: mptcp: join: fastclose: remove flaky marks
mptcp: fix duplicate reset on fastclose
mptcp: decouple mptcp fastclose from tcp close
mptcp: do not fallback when OoO is present
mptcp: fix premature close in case of fallback
mptcp: avoid unneeded subflow-level drops
mptcp: fix ack generation for fallback msk
wifi: rtw89: hw_scan: Don't let the operating channel be last
net: phylink: add missing supported link modes for the fixed-link
selftest: af_unix: Add test for SO_PEEK_OFF.
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
net/mlx5: Clean up only new IRQ glue on request_irq() failure
...
|
|
When listing attributes with --list-attrs, display the actual enum
values for attributes that reference an enum type.
# ./cli.py --family netdev --list-attrs dev-get
[..]
- xdp-features: u64 (enum: xdp-act)
Flags: basic, redirect, ndo-xmit, xsk-zerocopy, hw-offload, rx-sg, ndo-xmit-sg
Bitmask of enabled xdp-features.
[..]
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251118143208.2380814-4-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Enhance the --list-attrs option to recursively display nested attributes
instead of just showing "nest" as the type.
Nested attributes now show their attribute set name and expand to
display their contents.
# ./cli.py --family ethtool --list-attrs rss-get
[..]
Do request attributes:
- header: nest -> header
- dev-index: u32
- dev-name: string
- flags: u32 (enum: header-flags)
- phy-index: u32
- context: u32
[..]
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251118143208.2380814-3-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a --list-attrs option to the YNL CLI that displays information about
netlink operations, including request and reply attributes.
This eliminates the need to manually inspect YAML spec files to
determine the JSON structure required for operations, or understand the
structure of the reply.
Example usage:
# ./cli.py --family netdev --list-attrs dev-get
Operation: dev-get
Get / dump information about a netdev.
Do request attributes:
- ifindex: u32
netdev ifindex
Do reply attributes:
- ifindex: u32
netdev ifindex
- xdp-features: u64 (enum: xdp-act)
Bitmask of enabled xdp-features.
- xdp-zc-max-segs: u32
max fragment count supported by ZC driver
- xdp-rx-metadata-features: u64 (enum: xdp-rx-metadata)
Bitmask of supported XDP receive metadata features. See Documentation/networking/xdp-rx-metadata.rst for more details.
- xsk-features: u64 (enum: xsk-flags)
Bitmask of enabled AF_XDP features.
Dump reply attributes:
- ifindex: u32
netdev ifindex
- xdp-features: u64 (enum: xdp-act)
Bitmask of enabled xdp-features.
- xdp-zc-max-segs: u32
max fragment count supported by ZC driver
- xdp-rx-metadata-features: u64 (enum: xdp-rx-metadata)
Bitmask of supported XDP receive metadata features. See Documentation/networking/xdp-rx-metadata.rst for more details.
- xsk-features: u64 (enum: xsk-flags)
Bitmask of enabled AF_XDP features.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251118143208.2380814-2-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The previous patch fixed an issue with the 'add_addr_accepted' counter.
This was not spot by the test suite.
Check this counter and 'add_addr_signal' in MPTCP Join 'delete re-add
signal' test. This should help spotting similar regressions later on.
These counters are crucial for ensuring the MPTCP path manager correctly
handles the subflow creation via 'ADD_ADDR'.
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-11-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all userspace tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 290493078b96 ("selftests: mptcp: join: userspace: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-9-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rare cases, when the test environment is very slow, some endpoints
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all endpoints tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 6457595db987 ("selftests: mptcp: join: endpoints: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-8-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After recent fixes like the parent commit, and "selftests: mptcp:
connect: trunc: read all recv data", the two fastclose subtests no
longer look flaky any more.
It then feels fine to remove these flaky marks, to no longer ignore
these subtests in case of errors.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-7-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the ftrace fprobe is both fgraph and ftrace based implemented,
the selftest needs to be updated. This does not count the actual
number of lines, but just check the differences.
Link: https://lore.kernel.org/r/176295318112.431538.11780280333728368327.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 2867495dea86 ("tracing: tprobe-events: Register tracepoint when
enable tprobe event") caused regression bug and tprobe did not work.
To prevent similar problems, add a testcase which enables/disables a
tprobe and check the results.
Link: https://lore.kernel.org/r/176252610176.214996.3978515319000806265.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Parsing KTAP is quite an inconvenience, but most of the time the thing
you really want to know is "did anything fail"?
Let's give the user the his information without them needing
to parse anything.
Because of the use of subshells and namespaces, this needs to be
communicated via a file. Just write arbitrary data into the file and
treat non-empty content as a signal that something failed.
In case any user depends on the current behaviour, such as running this
from a script with `set -e` and parsing the result for failures
afterwards, add a flag they can set to get the old behaviour, namely
--no-error-on-fail.
Link: https://lore.kernel.org/r/20251111-b4-ksft-error-on-fail-v3-1-0951a51135f6@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The printf statement attempts to print the DMA direction string using
the syntax 'dir[directions]', which is an invalid array access. The
variable 'dir' is an integer, and 'directions' is a char pointer array.
This incorrect syntax should be 'directions[dir]', using 'dir' as the
index into the 'directions' array. Fix this by correcting the array
access from 'dir[directions]' to 'directions[dir]'.
Link: https://lore.kernel.org/r/20251104025234.2363-1-zhangchujun@cmss.chinamobile.com
Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The new test checks that a route that has been promoted from RA-learned
to static does not switch back when a new RA message arrives. In
addition, it checks that the route is owned by RA again when the static
address is removed.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20251115095939.6967-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test covers various cases to verify SO_PEEK_OFF behaviour
for all AF_UNIX socket types.
two_chunks_blocking and two_chunks_overlap_blocking reproduce
the issue mentioned in the previous patch.
Without the patch, the two tests fail:
# RUN so_peek_off.stream.two_chunks_blocking ...
# so_peek_off.c:121:two_chunks_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_blocking
not ok 3 so_peek_off.stream.two_chunks_blocking
# RUN so_peek_off.stream.two_chunks_overlap_blocking ...
# so_peek_off.c:159:two_chunks_overlap_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_overlap_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_overlap_blocking
not ok 5 so_peek_off.stream.two_chunks_overlap_blocking
With the patch, all tests pass:
# PASSED: 15 / 15 tests passed.
# Totals: pass:15 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251117174740.3684604-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing support for parsing MAC addresses when display_hint is 'mac'
in the YNL library. This enables YNL CLI to accept MAC address strings
for attributes like lladdr in rt-neigh operations.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251117024457.3034-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add *.d to gitignore for ynltool
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251117143155.44806-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The connect4_prog and bpf_iter_setsockopt tests duplicate the same
open-coded TCP congestion control string comparison logic. Since
bpf_strncmp() provides the same functionality, use it instead to
avoid repeated open-coded loops.
This change applies only to functional BPF tests and does not affect
the verifier performance benchmarks (veristat.cfg). No functional
changes intended.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251115225550.1086693-5-hoyeon.lee@suse.com
|
|
Some BPF selftests contain identical copies of the min(), max(),
before(), and after() helpers. These repeated snippets are the same
across the tests and do not need to be defined separately.
Move these helpers into bpf_tracing_net.h so they can be shared by
TCP related BPF programs. This removes repeated code and keeps the
helpers in a single place.
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251115225550.1086693-4-hoyeon.lee@suse.com
|
|
Some of the vsyscall selftests expect a #PF when vsyscalls are disabled.
However, with LASS enabled, an invalid access results in a SIGSEGV due
to a #GP instead of a #PF. One such negative test fails because it is
expecting X86_PF_INSTR to be set.
Update the failing test to expect either a #GP or a #PF. Also, update
the printed messages to show the trap number (denoting the type of
fault) instead of assuming a #PF.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20251118182911.2983253-8-sohil.mehta%40intel.com
|
|
Now that we have tools/lib/python for our Python modules, turn them into
proper packages with a single namespace so that everything can just use
tools/lib/python in sys.path. No functional change.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251110220430.726665-3-corbet@lwn.net>
|
|
"scripts/lib" was always a bit of an awkward place for Python modules. We
already have tools/lib; create a tools/lib/python, move the libraries
there, and update the users accordingly.
While at it, move the contents of tools/docs/lib. Rather than make another
directory, just put these documentation-oriented modules under "kdoc".
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251110220430.726665-2-corbet@lwn.net>
|
|
Add selftests to verify and document Linux’s intended behaviour for
UNIX domain sockets (SOCK_STREAM and SOCK_DGRAM) when a peer closes.
The tests verify that:
1. SOCK_STREAM returns EOF when the peer closes normally.
2. SOCK_STREAM returns ECONNRESET if the peer closes with unread data.
3. SOCK_SEQPACKET returns EOF when the peer closes normally.
4. SOCK_SEQPACKET returns ECONNRESET if the peer closes with unread data.
5. SOCK_DGRAM does not return ECONNRESET when the peer closes.
This follows up on review feedback suggesting a selftest to clarify
Linux’s semantics.
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Sunday Adelodun <adelodunolaoluwa@yahoo.com>
Link: https://patch.msgid.link/20251113112802.44657-1-adelodunolaoluwa@yahoo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
XXH3 is only supported starting with xxhash 0.8. Enforce that.
Fixes: 0d83da43b1e1 ("objtool/klp: Add --checksum option to generate per-function checksums")
Closes: https://lore.kernel.org/SN6PR02MB41579B83CD295C9FEE40EED6D4FCA@SN6PR02MB4157.namprd02.prod.outlook.com
Reported-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/7227c94692a3a51840278744c7af31b4797c6b96.1762990139.git.jpoimboe@kernel.org
|
