| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
This patch adds a near[1] complete YNL specification for WireGuard,
documenting the protocol in a machine-readable format, rather than
comments in wireguard.h, and eases usage from C and non-C programming
languages alike.
The generated C library will be featured in a later patch, so in
this patch I will use the in-kernel python client for examples.
This makes the documentation in the UAPI header redundant, it is
therefore removed. The in-line documentation in the spec is based
on the existing comment in wireguard.h, and once released it will
be available in the kernel documentation at:
https://docs.kernel.org/netlink/specs/wireguard.html
(until then run: make htmldocs)
Generate wireguard.rst from this spec:
$ make -C tools/net/ynl/generated/ wireguard.rst
Query wireguard interface through pyynl:
$ sudo ./tools/net/ynl/pyynl/cli.py --family wireguard \
--dump get-device \
--json '{"ifindex":3}'
[{'fwmark': 0,
'ifindex': 3,
'ifname': 'wg-test',
'listen-port': 54318,
'peers': [{0: {'allowedips': [{0: {'cidr-mask': 0,
'family': 2,
'ipaddr': '0.0.0.0'}},
{0: {'cidr-mask': 0,
'family': 10,
'ipaddr': '::'}}],
'endpoint': b'[...]',
'last-handshake-time': {'nsec': 42, 'sec': 42},
'persistent-keepalive-interval': 42,
'preshared-key': '[...]',
'protocol-version': 1,
'public-key': '[...]',
'rx-bytes': 42,
'tx-bytes': 42}}],
'private-key': '[...]',
'public-key': '[...]'}]
Add another allowed IP prefix:
$ sudo ./tools/net/ynl/pyynl/cli.py --family wireguard \
--do set-device --json '{"ifindex":3,"peers":[
{"public-key":"6a df b1 83 a4 ..","allowedips":[
{"cidr-mask":0,"family":10,"ipaddr":"::"}]}]}'
[1] As can be seen above, the "endpoint" is only dumped as binary data,
as it can't be fully described in YNL. It's either a struct
sockaddr_in or struct sockaddr_in6 depending on the attribute length.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Fix two schema check errors that have lurked since the attribute name
validation was made more strict:
not ok 2 conntrack.yaml schema validation
'labels mask' does not match '^[0-9a-z-]+$'
not ok 13 nftables.yaml schema validation
'set id' does not match '^[0-9a-z-]+$'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix warning reported by yamllint:
../../../Documentation/netlink/specs/ethtool.yaml
1272:21 warning truthy value should be one of [false, true] (truthy)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge energy model management updates and operating performance points
(OPP) library changes for 6.19-rc1:
- Add support for sending netlink notifications to user space on energy
model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
* pm-em:
PM: EM: Add to em_pd_list only when no failure
PM: EM: Notify an event when the performance domain changes
PM: EM: Implement em_notify_pd_created/updated()
PM: EM: Implement em_notify_pd_deleted()
PM: EM: Implement em_nl_get_pd_table_doit()
PM: EM: Implement em_nl_get_pds_doit()
PM: EM: Add an iterator and accessor for the performance domain
PM: EM: Add a skeleton code for netlink notification
PM: EM: Add em.yaml and autogen files
PM: EM: Expose the ID of a performance domain via debugfs
PM: EM: Assign a unique ID when creating a performance domain
* pm-opp:
rust: opp: simplify callers of `to_c_str_array`
OPP: Initialize scope-based pointers inline
rust: opp: fix broken rustdoc link
|
|
The fix commit converted several IPv4 address attributes from binary
to u32, but forgot to specify byte-order: big-endian. Without this,
YNL tools display IPv4 addresses incorrectly due to host-endian
interpretation.
Add the missing byte-order: big-endian to all affected u32 IPv4
address fields to ensure correct parsing and display.
Fixes: 1064d521d177 ("netlink: specs: support ipv4-or-v6 for dual-stack fields")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20251125112048.37631-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support querying and resetting to default param values.
Introduce two new devlink netlink attrs:
DEVLINK_ATTR_PARAM_VALUE_DEFAULT and
DEVLINK_ATTR_PARAM_RESET_DEFAULT. The former is used to contain an
optional parameter value inside of the param_value nested
attribute. The latter is used in param-set requests from userspace to
indicate that the driver should reset the param to its default value.
To implement this, two new functions are added to the devlink driver
api: devlink_param::get_default() and
devlink_param::reset_default(). These callbacks allow drivers to
implement default param actions for runtime and permanent cmodes. For
driverinit params, the core latches the last value set by a driver via
devl_param_driverinit_value_set(), and uses that as the default value
for a param.
Because default parameter values are optional, it would be impossible
to discern whether or not a param of type bool has default value of
false or not provided if the default value is encoded using a netlink
flag type. For this reason, when a DEVLINK_PARAM_TYPE_BOOL has an
associated default value, the default value is encoded using a u8
type.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251119025038.651131-4-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 1b255e1beabf ("tools: ynl: add ipv4-or-v6 display hint"), we
can display either IPv4 or IPv6 addresses for a single field based on the
address family. However, most dual-stack fields still use the ipv4 display
hint. This update changes them to use the new ipv4-or-v6 display hint and
converts IPv4-only fields to use the u32 type.
Field changes:
- v4-or-v6
- IFA_ADDRESS, IFA_LOCAL
- IFLA_GRE_LOCAL, IFLA_GRE_REMOTE
- IFLA_VTI_LOCAL, IFLA_VTI_REMOTE
- IFLA_IPTUN_LOCAL, IFLA_IPTUN_REMOTE
- NDA_DST
- RTA_DST, RTA_SRC, RTA_GATEWAY, RTA_PREFSRC
- FRA_SRC, FRA_DST
- ipv4
- IFA_BROADCAST
- IFLA_GENEVE_REMOTE
- IFLA_IPTUN_6RD_RELAY_PREFIX
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251117024457.3034-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
YNL wasn't able to decode the linkinfo from hsr interfaces. Add the
linkinfo attribute definitions for hsr interfaces. Example output now
looks like this:
$ ynl --spec Documentation/netlink/specs/rt-link.yaml --do getlink \
--json '{"ifname": "hsr0"}' --output-json | jq .linkinfo
{
"kind": "hsr",
"data": {
"slave1": 15,
"slave2": 13,
"supervision-addr": "01:15:4e:00:01:00",
"seq-nr": 64511,
"version": 1,
"protocol": 0
}
}
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Link: https://patch.msgid.link/926077a70de614f1539c905d06515e258905255e.1762968225.git.fmaurer@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adds DEVLINK_ESWITCH_MODE_SWITCHDEV_INACTIVE attribute to UAPI and
documentation.
Before having traffic flow through an eswitch, a user may want to have the
ability to block traffic towards the FDB until FDB is fully programmed and
the user is ready to send traffic to it. For example: when two eswitches
are present for vports in a multi-PF setup, one eswitch may take over the
traffic from the other when the user chooses.
Before this take over, a user may want to first program the inactive
eswitch and then once ready redirect traffic to this new eswitch.
switchdev modes transition semantics:
legacy->switchdev_inactive: Create switchdev mode normally, traffic not
allowed to flow yet.
switchdev_inactive->switchdev: Enable traffic to flow.
switchdev->switchdev_inactive: Block traffic on the FDB, FDB and
representros state and content is preserved.
When eswitch is configured to this mode, traffic is ignored/dropped on
this eswitch FDB, while current configuration is kept, e.g FDB rules and
netdev representros are kept available, FDB programming is allowed.
Example:
# start inactive switchdev
devlink dev eswitch set pci/0000:08:00.1 mode switchdev_inactive
# setup TC rules, representors etc ..
# activate
devlink dev eswitch set pci/0000:08:00.1 mode switchdev
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20251108070404.1551708-2-saeed@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Provide a driver api for reporting device statistics required by the
"Implementation Requirements" section of the PSP Architecture
Specification. Use a warning to ensure drivers report stats required
by the spec.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251106002608.1578518-4-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Track and report stats common to all psp devices from the core. A
'stale-event' is when the core marks the rx state of an active
psp_assoc as incapable of authenticating psp encapsulated data.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251106002608.1578518-2-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing entries in C attribute list.
Link: https://patch.msgid.link/20251104232348.1954349-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce the userspace entry point for PHY MSE diagnostics via
ethtool netlink. This exposes the core API added previously and
returns both capability information and one or more snapshots.
Userspace sends ETHTOOL_MSG_MSE_GET. The reply carries:
- ETHTOOL_A_MSE_CAPABILITIES: scale limits and timing information
- ETHTOOL_A_MSE_CHANNEL_* nests: one or more snapshots (per-channel
if available, otherwise WORST, otherwise LINK)
Link down returns -ENETDOWN.
Changes:
- YAML: add attribute sets (mse, mse-capabilities, mse-snapshot)
and the mse-get operation
- UAPI (generated): add ETHTOOL_A_MSE_* enums and message IDs,
ETHTOOL_MSG_MSE_GET/REPLY
- ethtool core: add net/ethtool/mse.c implementing the request,
register genl op, and hook into ethnl dispatch
- docs: document MSE_GET in ethtool-netlink.rst
The include/uapi/linux/ethtool_netlink_generated.h is generated
from Documentation/netlink/specs/ethtool.yaml.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251027122801.982364-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new state NAPI_STATE_THREADED_BUSY_POLL to the NAPI state enum to
enable and disable threaded busy polling.
When threaded busy polling is enabled for a NAPI, enable
NAPI_STATE_THREADED also.
When the threaded NAPI is scheduled, set NAPI_STATE_IN_BUSY_POLL to
signal napi_complete_done not to rearm interrupts.
Whenever NAPI_STATE_THREADED_BUSY_POLL is unset, the
NAPI_STATE_IN_BUSY_POLL will be unset, napi_complete_done unsets the
NAPI_STATE_SCHED_THREADED bit also, which in turn will make the kthread
go to sleep.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Martin Karsten <mkarsten@uwaterloo.ca>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Link: https://patch.msgid.link/20251028203007.575686-2-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Phase-adjust values are currently limited by a min-max range. Some
hardware requires, for certain pin types, that values be multiples of
a specific granularity, as in the zl3073x driver.
Add a `phase-adjust-gran` pin attribute and an appropriate field in
dpll_pin_properties. If set by the driver, use its value to validate
user-provided phase-adjust values.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20251029153207.178448-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dpll.yaml spec incorrectly omitted module-name and clock-id from the
pin-get operation reply specification, even though the kernel DPLL
implementation has always included these attributes in pin-get responses
since the initial implementation.
This spec inconsistency caused issues with the C YNL code generator.
The generated dpll_pin_get_rsp structure was missing these fields.
Fix the spec by adding module-name and clock-id to the pin-attrs reply
specification to match the actual kernel behavior.
Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251024185512.363376-1-poros@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a generic netlink spec in YAML format and autogenerate boilerplate
code using ynl-regen.sh to introduce a generic netlink for the energy
model. It allows a userspace program to read the performance domain and
its energy model. It notifies the userspace program when a performance
domain is created or deleted or its energy model is updated through a
multicast interface.
Specifically, it supports two commands:
- EM_CMD_GET_PDS: Get the list of information for all performance
domains.
- EM_CMD_GET_PD_TABLE: Get the energy model table of a performance
domain.
Also, it supports three notification events:
- EM_CMD_PD_CREATED: When a performance domain is created.
- EM_CMD_PD_DELETED: When a performance domain is deleted.
- EM_CMD_PD_UPDATED: When the energy model table of a performance domain
is updated.
Finally, update MAINTAINERS to include new files.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20251020220914.320832-4-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
|
This reverts commit 7bd80ed89d72285515db673803b021469ba71ee8.
I should not have merged it to begin with due to pending review and
changes to be addressed.
Link: https://patch.msgid.link/c6f3af12df9b7998920a02027fc8893ce82afc4c.1759239721.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce a new document, flow_control.rst, to provide a comprehensive
guide on Ethernet Flow Control in Linux. The guide explains how flow
control works, how autonegotiation resolves pause capabilities, and how
to configure it using ethtool and Netlink.
In parallel, document the pause and pause-stat attributes in the
ethtool.yaml netlink spec. This enables the ynl tool to generate
kernel-doc comments for the corresponding enums in the UAPI header,
making the C interface self-documenting.
Finally, replace the legacy flow control section in phy.rst with a
reference to the new document and add pointers in the relevant C source
files.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250924120241.724850-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add dpll device level attribute DPLL_A_PHASE_OFFSET_AVG_FACTOR to allow
control over a calculation of reported phase offset value. Attribute is
present, if the driver provides such capability, otherwise attribute
shall not be present.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250927084912.2343597-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IEEE 802.3ck-2022 defines counters for FEC bins and 802.3df-2024
clarifies it a bit further. Implement reporting interface through as
addition to FEC stats available in ethtool. Drivers can leave bin
counter uninitialized if per-lane values are provided. In this case the
core will recalculate summ for the bin.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250924124037.1508846-2-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that such info is in the 'flags' attribute, it is time to deprecate
the dedicated 'server-side' attribute.
It will be removed in a few versions.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250919-net-next-mptcp-server-side-flag-v1-3-a97a5d561a8b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This attribute is a boolean. No need to add it to set it to 'false'.
Indeed, the default value when this attribute is not set is naturally
'false'. A few bytes can then be saved by not adding this attribute if
the connection is not on the server side.
This prepares the future deprecation of its attribute, in favour of a
new flag.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250919-net-next-mptcp-server-side-flag-v1-1-a97a5d561a8b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Various network interface types make use of needed_{head,tail}room values
to efficiently reserve buffer space for additional encapsulation headers,
such as VXLAN, Geneve, IPSec, etc. However, it is not currently possible
to query these values in a generic way.
Introduce ability to query the needed_{head,tail}room values of a network
device via rtnetlink, such that applications that may wish to use these
values can do so.
For example, Cilium agent iterates over present devices based on user config
(direct routing, vxlan, geneve, wireguard etc.) and in future will configure
netkit in order to expose the needed_{head,tail}room into K8s pods. See
b9ed315d3c4c ("netkit: Allow for configuring needed_{head,tail}room").
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alasdair McWilliam <alasdair@mcwilliam.dev>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20250917095543.14039-1-alasdair@mcwilliam.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c9d ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a46216 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the ability to install PSP Rx and Tx crypto keys on TCP
connections. Netlink ops are provided for both operations.
Rx side combines allocating a new Rx key and installing it
on the socket. Theoretically these are separate actions,
but in practice they will always be used one after the
other. We can add distinct "alloc" and "install" ops later.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-9-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rotating the device key is a key part of the PSP protocol design.
Some external daemon needs to do it once a day, or so.
Add a netlink op to perform this operation.
Add a notification group for informing users that key has been
rotated and they should rekey (next rotation will cut them off).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-6-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a netlink family for PSP and allow drivers to register support.
The "PSP device" is its own object. This allows us to perform more
flexible reference counting / lifetime control than if PSP information
was part of net_device. In the future we should also be able
to "delegate" PSP access to software devices, such as *vlan, veth
or netkit more easily.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-3-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
I'm trying to generate Rust bindings for netlink using the yaml spec.
It looks like there's a typo in conntrack spec: attribute set conntrack-attrs
defines attributes "counters-{orig,reply}" (plural), while get operation
references "counter-{orig,reply}" (singular). The latter should be fixed, as it
denotes multiple counters (packet and byte). The corresonding C define is
CTA_COUNTERS_ORIG.
Also, dump request references "nfgen-family" attribute, which neither exists in
conntrack-attrs attrset nor ctattr_type enum. There's member of nfgenmsg struct
with the same name, which is where family value is actually taken from.
> static int ctnetlink_dump_exp_ct(struct net *net, struct sock *ctnl,
> struct sk_buff *skb,
> const struct nlmsghdr *nlh,
> const struct nlattr * const cda[],
> struct netlink_ext_ack *extack)
> {
> int err;
> struct nfgenmsg *nfmsg = nlmsg_data(nlh);
> u_int8_t u3 = nfmsg->nfgen_family;
^^^^^^^^^^^^
Signed-off-by: Remy D. Farley <one-d-wide@protonmail.com>
Fixes: 23fc9311a526 ("netlink: specs: add conntrack dump and stats dump support")
Link: https://patch.msgid.link/20250913140515.1132886-1-one-d-wide@protonmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The attribute WGALLOWEDIP_A_IPADDR can contain either an IPv4
or an IPv6 address depending on WGALLOWEDIP_A_FAMILY, however
in practice it is enough to look at the attribute length.
This patch implements an ipv4-or-v6 display hint, that can
deal with this kind of attribute.
It only implements this display hint for genetlink-legacy, it
can be added to other protocol variants if needed, but we don't
want to encourage it's use.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250915144301.725949-12-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In YAML, it is allowed to declare a scalar strings at the next lines
without explicitly declaring them as a block. Yet, they looks weird, and
can cause issues when ':' or '#' are present.
The modified lines didn't have issues with the special characters, but
it seems better to explicitly declare such blocks as scalar strings to
encourage people to "properly" declare future scalar strings.
The right angle bracket is used with a minus sign to indicate that the
folded style should be used without adding extra newlines. By doing
that, the output is not changed compared to what was done before this
patch.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250913-net-next-ynl-attr-doc-rst-v3-3-4f06420d87db@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By default, strings defined in YAML at the next line are folded:
newlines are replaced by spaces. Here, the newlines are there for a
reason, and should be kept in the output.
This can be fixed by adding the '|' symbol to use the "literal" style.
This issue was introduced by commit 387724cbf415 ("Documentation:
netlink: add a YAML spec for team"), but visible in the doc only since
the parent commit.
To avoid warnings when generating the HTML output, and to look better,
the code layout is now in a dedicated code block, which requires '::'
and a new blank line. Just for a question of uniformity, a new blank
line is also added after the code block.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250913-net-next-ynl-attr-doc-rst-v3-2-4f06420d87db@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During the connection establishment, a peer can tell the other one that
it cannot establish new subflows to the initial IP address and port by
setting the 'C' flag [1]. Doing so makes sense when the sender is behind
a strict NAT, operating behind a legacy Layer 4 load balancer, or using
anycast IP address for example.
When this 'C' flag is set, the path-managers must then not try to
establish new subflows to the other peer's initial IP address and port.
The in-kernel PM has access to this info, but the userspace PM didn't.
The RFC8684 [1] is strict about that:
(...) therefore the receiver MUST NOT try to open any additional
subflows toward this address and port.
So it is important to tell the userspace about that as it is responsible
for the respect of this flag.
When a new connection is created and established, the Netlink events
now contain the existing but not currently used 'flags' attribute. When
MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 is set, it means no other subflows
to the initial IP address and port -- info that are also part of the
event -- can be established.
Link: https://datatracker.ietf.org/doc/html/rfc8684#section-3.1-20.6 [1]
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/532
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-2-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e1052 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38d9 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This attribute is used as a signed number in the code in pm_netlink.c:
nla_put_s32(skb, MPTCP_ATTR_IF_IDX, ssk->sk_bound_dev_if))
The specs should then reflect that. Note that other 'if-idx' attributes
from the same .yaml file use a signed number as well.
Fixes: bc8aeb2045e2 ("Documentation: netlink: add a YAML spec for mptcp")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250908-net-mptcp-misc-fixes-6-17-rc5-v1-1-5f2168a66079@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While updating the binary min-len implementation, I noticed that
the only user, should AFAICT be using exact-len instead.
In net/ipv4/fou_core.c FOU_ATTR_LOCAL_V6 and FOU_ATTR_PEER_V6
are only used for singular IPv6 addresses, and there are AFAICT
no known implementations trying to send more, it therefore
appears safe to change it to an exact-len policy.
This patch therefore changes the local-v6/peer-v6 attributes to
use an exact-len check, instead of a min-len check.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250902154640.759815-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable configuration of the burst period — a time window starting
from the first error recovery, during which the reporter allows
recovery attempts for each reported error.
This feature is helpful when a single underlying issue causes multiple
errors, as it delays the start of the grace period to allow sufficient
time for recovering all related errors. For example, if multiple TX
queues time out simultaneously, a sufficient burst period could allow
all affected TX queues to be recovered within that window. Without this
period, only the first TX queue that reports a timeout will undergo
recovery, while the remaining TX queues will be blocked once the grace
period begins.
Configuration example:
$ devlink health set pci/0000:00:09.0 reporter tx burst_period 500
Configuration example with ynl:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/devlink.yaml \
--do health-reporter-set --json '{
"bus-name": "auxiliary",
"dev-name": "mlx5_core.eth.0",
"port-index": 65535,
"health-reporter-name": "tx",
"health-reporter-burst-period": 500
}'
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250824084354.533182-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The usage of underscores is no longer allowed for the 'name' format in
the yaml spec. Instead, dashes should be used. This fixes the build
issue reported by Thorsten that showed up on linux-next.
Note this change has no impact on C code.
Cc: Jakub Kicinski <kuba@kernel.org>
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/all/e21744a4-0155-40ec-b8c1-d81b14107c9f@leemhuis.info/
Fixes: 63740349eba7 ("binder: introduce transaction reports via netlink")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20250821135522.2878772-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce a generic netlink multicast event to report binder transaction
failures to userspace. This allows subscribers to monitor these events
and take appropriate actions, such as stopping a misbehaving application
that is spamming a service with huge amount of transactions.
The multicast event contains full details of the failed transactions,
including the sender/target PIDs, payload size and specific error code.
This interface is defined using a YAML spec, from which the UAPI and
kernel headers and source are auto-generated.
Signed-off-by: Li Li <dualli@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20250727182932.2499194-4-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-docs
Mauro Carvalho Chehab says:
====================
add a generic yaml parser integrated with Netlink specs generation
- An YAML parser Sphinx plugin, integrated with Netlink YAML doc
parser.
The patch content is identical to my v10 submission:
https://lore.kernel.org/cover.1753718185.git.mchehab+huawei@kernel.org
* tag 'docs/v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-docs:
sphinx: parser_yaml.py: fix line numbers information
docs: parser_yaml.py: fix backward compatibility with old docutils
docs: parser_yaml.py: add support for line numbers from the parser
tools: netlink_yml_parser.py: add line numbers to parsed data
MAINTAINERS: add netlink_yml_parser.py to linux-doc
docs: netlink: remove obsolete .gitignore from unused directory
tools: ynl_gen_rst.py: drop support for generating index files
docs: uapi: netlink: update netlink specs link
docs: use parser_yaml extension to handle Netlink specs
docs: sphinx: add a parser for yaml files for Netlink specs
tools: ynl_gen_rst.py: cleanup coding style
docs: netlink: index.rst: add a netlink index file
tools: ynl_gen_rst.py: Split library from command line tool
docs: netlink: netlink-raw.rst: use :ref: instead of :doc:
====================
Link: https://patch.msgid.link/20250812113329.356c93c2@foz.lan
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some modern NICs support including the IPv6 Flow Label in
the flow hash for RSS queue selection. This is outside
the old "Microsoft spec", but was included in the OCP NIC spec:
[ ] RSS include flow label in the hash (configurable)
https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling
RSS Flow Label hashing allows TCP Protective Load Balancing (PLB)
to recover from receiver congestion / overload.
Rx CPU/queue hotspots are relatively common for data ingest
workloads, and so far we had to try to detect the condition
at the RPC layer and reopen the connection. PLB lets us change
the Flow Label and therefore Rx CPU on RTO, with minimal packet
reordering. PLB reaction times are much faster, and can happen
at any point in the connection, not just at RPC boundaries.
Due to the nature of host processing (relatively long queues,
other kernel subsystems masking IRQs for 100s of msecs)
the risk of reordering within the host is higher than in
the network. But for applications which need it - it is far
preferable to potentially persistent overload of subset of
queues.
It is expected that the hash communicated to the host
may change if the Flow Label changes. This may be surprising
to some host software, but I don't expect the devices
can compute two Toeplitz hashes, one with the Flow Label
for queue selection and one without for the rx hash
communicated to the host. Besides, changing the hash
may potentially help to change the path thru host queues.
User can disable NETIF_F_RXHASH if they require a stable
flow hash.
The name RXH_IP6_FL was chosen based on what we call
Flow Label variables in IPv6 processing (fl). I prefer
fl_lbl but that appears to be an fbnic-only spelling.
We could spell out RXH_IP6_FLOW_LABEL but existing
RXH_ defines are a lot more terse.
Willem notes [1] that Flow Label is defined as identifying the flow
and therefore including both the flow label _and_ the L4 header
fields is not generally necessary. But it should not hurt so
it's not explicitly prevented if the driver supports hashing
on both at the same time.
Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of generating the index file, use glob to automatically
include all data from yaml.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
|
|
Module (SFP) eeprom GET has a lot of input params, they are all
mistakenly listed as output in the spec. Looks like kernel doesn't
output them at all. Correct what are the inputs and what the outputs.
Reported-by: Duo Yi <duo@meta.com>
Fixes: a353318ebf24 ("tools: ynl: populate most of the ethtool spec")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250730172137.1322351-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of using '0' and '1' for napi threaded state use an enum with
'disabled' and 'enabled' states.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-4-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce the specification of tc qdisc DualPI2 stats and attributes,
which is the reference implementation of IETF RFC9332 DualQ Coupled AQM
(https://datatracker.ietf.org/doc/html/rfc9332) providing two different
queues: low latency queue (L-queue) and classic queue (C-queue).
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Link: https://patch.msgid.link/20250722095915.24485-7-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The devlink_nl_rate_tc_bw_parse function uses a large stack array for
devlink attributes, which triggers a warning about excessive stack
usage:
net/devlink/rate.c: In function 'devlink_nl_rate_tc_bw_parse':
net/devlink/rate.c:382:1: error: the frame size of 1648 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Introduce a separate attribute set specifically for rate TC bandwidth
parsing that only contains the two attributes actually used: index
and bandwidth. This reduces the stack array from DEVLINK_ATTR_MAX
entries to just 2 entries, solving the stack usage issue.
Update devlink selftest to use the new 'index' and 'bw' attribute names
consistent with the YAML spec.
Example usage with ynl with the new spec:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-set --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1,
"rate-tc-bws": [
{"index": 0, "bw": 50},
{"index": 1, "bw": 50},
{"index": 2, "bw": 0},
{"index": 3, "bw": 0},
{"index": 4, "bw": 0},
{"index": 5, "bw": 0},
{"index": 6, "bw": 0},
{"index": 7, "bw": 0}
]
}'
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-get --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1
}'
output for rate-get:
{'bus-name': 'pci',
'dev-name': '0000:08:00.0',
'port-index': 1,
'rate-tc-bws': [{'bw': 50, 'index': 0},
{'bw': 50, 'index': 1},
{'bw': 0, 'index': 2},
{'bw': 0, 'index': 3},
{'bw': 0, 'index': 4},
{'bw': 0, 'index': 5},
{'bw': 0, 'index': 6},
{'bw': 0, 'index': 7}],
'rate-tx-max': 0,
'rate-tx-priority': 0,
'rate-tx-share': 0,
'rate-tx-weight': 0,
'rate-type': 'leaf'}
Fixes: 566e8f108fc7 ("devlink: Extend devlink rate API with traffic classes bandwidth management")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/netdev/20250708160652.1810573-1-arnd@kernel.org/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507171943.W7DJcs6Y-lkp@intel.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Tested-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/1753175609-330621-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement removing additional RSS contexts via Netlink.
Technically it'd be possible to shoehorn the delete operation
into ethnl_request_ops-compatible handler. The code ends
up longer than open coded version, and I think we'll need
a custom way of sending notifications at some stage (if we
allow tying the context lifetime to the netlink socket, in
the future).
Link: https://patch.msgid.link/20250717234343.2328602-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support creating contexts via Netlink. Setting flow hashing
fields on the new context is not supported at this stage,
it can be added later.
An empty indirection table is not supported. This is a carry
over from the IOCTL interface where empty indirection table
meant delete. We can repurpose empty indirection table in
Netlink but for now to avoid confusion reject it using the
policy.
Support letting user choose the ID for the new context. This was
not possible in IOCTL since the context ID field for the create
action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value.
Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET.
The tricky part is dealing with symmetric hashing. In netlink user
can change the hashing fields and symmetric hash in one request,
in IOCTL the two used to be set via different uAPI requests.
Since fields and hash function config are still separate driver
callbacks - changes to the two are not atomic. Keep things simple
and validate the settings against both pre- and post- change ones.
Meaning that we will reject the config request if user tries
to correct the flow fields and set input_xfrm in one request,
or disables input_xfrm and makes flow fields non-symmetric.
We can adjust it later if there's a real need. Starting simple feels
right, and potentially partially applying the settings isn't nice,
either.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support configuring symmetric hashing via Netlink.
We have the flow field config prepared as part of SET handling,
so scan it for conflicts instead of querying the driver again.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Help YNL decode the values for input-xfrm by defining
the possible values in the spec. Don't define "no change"
as it's an IOCTL artifact with no use in Netlink.
With this change on mlx5 input-xfrm gets decoded:
# ynl --family ethtool --dump rss-get
[{'header': {'dev-index': 2, 'dev-name': 'eth0'},
'hfunc': 1,
'hkey': b'V\xa8\xf9\x9 ...',
'indir': [0, 1, ... ],
'input-xfrm': {'sym-or-xor'}, <<<
'flow-hash': {'ah4': {'ip-dst', 'ip-src'},
'ah6': {'ip-dst', 'ip-src'},
'esp4': {'ip-dst', 'ip-src'},
'esp6': {'ip-dst', 'ip-src'},
'ip4': {'ip-dst', 'ip-src'},
'ip6': {'ip-dst', 'ip-src'},
'tcp4': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'tcp6': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'udp4': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'udp6': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'}}
}]
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support setting RSS hashing key via ethtool Netlink.
Use the Netlink policy to make sure user doesn't pass
an empty key, "resetting" the key is not a thing.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support setting RSS hash function / algo via ethtool Netlink.
Like IOCTL we don't validate that the function is within the
range known to the kernel. The drivers do a pretty good job
validating the inputs, and the IDs are technically "dynamically
queried" rather than part of uAPI.
Only change should be that in Netlink we don't support user
explicitly passing ETH_RSS_HASH_NO_CHANGE (0), if no change
is requested the attribute should be absent.
The ETH_RSS_HASH_NO_CHANGE is retained in driver-facing
API for consistency (not that I see a strong reason for it).
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add initial support for RSS_SET, for now only operations on
the indirection table are supported.
Unlike the ioctl don't check if at least one parameter is
being changed. This is how other ethtool-nl ops behave,
so pick the ethtool-nl consistency vs copying ioctl behavior.
There are two special cases here:
1) resetting the table to defaults;
2) support for tables of different size.
For (1) I use an empty Netlink attribute (array of size 0).
(2) may require some background. AFAICT a lot of modern devices
allow allocating RSS tables of different sizes. mlx5 can upsize
its tables, bnxt has some "table size calculation", and Intel
folks asked about RSS table sizing in context of resource allocation
in the past. The ethtool IOCTL API has a concept of table size,
but right now the user is expected to provide a table exactly
the size the device requests. Some drivers may change the table
size at runtime (in response to queue count changes) but the
user is not in control of this. What's not great is that all
RSS contexts share the same table size. For example a device
with 128 queues enabled, 16 RSS contexts 8 queues in each will
likely have 256 entry tables for each of the 16 contexts,
while 32 would be more than enough given each context only has
8 queues. To address this the Netlink API should avoid enforcing
table size at the uAPI level, and should allow the user to express
the min table size they expect.
To fully solve (2) we will need more driver plumbing but
at the uAPI level this patch allows the user to specify
a table size smaller than what the device advertises. The device
table size must be a multiple of the user requested table size.
We then replicate the user-provided table to fill the full device
size table. This addresses the "allow the user to express the min
table size" objective, while not enforcing any fixed size.
From Netlink perspective .get_rxfh_indir_size() is now de facto
the "max" table size supported by the device.
We may choose to support table replication in ethtool, too,
when we actually plumb this thru the device APIs.
Initially I was considering moving full pattern generation
to the kernel (which queues to use, at which frequency and
what min sequence length). I don't think this complexity
would buy us much and most if not all devices have pow-2
table sizes, which simplifies the replication a lot.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc7).
Conflicts:
Documentation/netlink/specs/ovpn.yaml
880d43ca9aa4 ("netlink: specs: clean up spaces in brackets")
af52020fc599 ("ovpn: reject unexpected netlink attributes")
drivers/net/phy/phy_device.c
a44312d58e78 ("net: phy: Don't register LEDs for genphy")
f0f2b992d818 ("net: phy: Don't register LEDs for genphy")
https://lore.kernel.org/20250710114926.7ec3a64f@kernel.org
drivers/net/wireless/intel/iwlwifi/fw/regulatory.c
drivers/net/wireless/intel/iwlwifi/mld/regulatory.c
5fde0fcbd760 ("wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap")
ea045a0de3b9 ("wifi: iwlwifi: add support for accepting raw DSM tables by firmware")
net/ipv6/mcast.c
ae3264a25a46 ("ipv6: mcast: Delay put pmc->idev in mld_del_delrec()")
a8594c956cc9 ("ipv6: mcast: Avoid a duplicate pointer check in mld_del_delrec()")
https://lore.kernel.org/8cc52891-3653-4b03-a45e-05464fe495cf@kernel.org
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netlink ops do not expect all attributes to be always set, however
this condition is not explicitly coded any where, leading the user
to believe that all sent attributes are somewhat processed.
Fix this behaviour by introducing explicit checks.
For CMD_OVPN_PEER_GET and CMD_OVPN_KEY_GET directly open-code the
needed condition in the related ops handlers.
While for all other ops use attribute subsets in the ovpn.yaml spec file.
Fixes: b7a63391aa98 ("ovpn: add basic netlink support")
Reported-by: Ralf Lici <ralf@mandelbit.com>
Closes: https://github.com/OpenVPN/ovpn-net-next/issues/19
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
A net device has a threaded sysctl that can be used to enable threaded
NAPI polling on all of the NAPI contexts under that device. Allow
enabling threaded NAPI polling at individual NAPI level using netlink.
Extend the netlink operation `napi-set` and allow setting the threaded
attribute of a NAPI. This will enable the threaded polling on a NAPI
context.
Add a test in `nl_netdev.py` that verifies various cases of threaded
NAPI being set at NAPI and at device level.
Tested
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250710211203.3979655-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement ETHTOOL_GRXFH over Netlink. The number of flow types is
reasonable (around 20) so report all of them at once for simplicity.
Do not maintain the flow ID mapping with ioctl at the uAPI level.
This gives us a chance to clean up the confusion that come from
RxNFC vs RxFH (flow direction vs hashing) in the ioctl.
Try to align with the names used in ethtool CLI, they seem to have
stood the test of time just fine. One annoyance is that we still
call L4 ports the weird names, but I guess they also apply to IPSec
(where they cover the SPI) so it is what it is.
$ ynl --family ethtool --dump rss-get
{
"header": {
"dev-index": 1,
"dev-name": "enp1s0"
},
"hfunc": 1,
"hkey": b"...",
"indir": [0, 1, ...],
"flow-hash": {
"ether": {"l2da"},
"ah-esp4": {"ip-src", "ip-dst"},
"ah-esp6": {"ip-src", "ip-dst"},
"ah4": {"ip-src", "ip-dst"},
"ah6": {"ip-src", "ip-dst"},
"esp4": {"ip-src", "ip-dst"},
"esp6": {"ip-src", "ip-dst"},
"ip4": {"ip-src", "ip-dst"},
"ip6": {"ip-src", "ip-dst"},
"sctp4": {"ip-src", "ip-dst"},
"sctp6": {"ip-src", "ip-dst"},
"udp4": {"ip-src", "ip-dst"},
"udp6": {"ip-src", "ip-dst"}
"tcp4": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"},
"tcp6": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"},
},
}
Link: https://patch.msgid.link/20250708220640.2738464-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new netlink parameter 'HANDSHAKE_A_ACCEPT_KEYRING' to provide
the serial number of the keyring to use.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250701144657.104401-1-hare@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce support for specifying relative bandwidth shares between
traffic classes (TC) in the devlink-rate API. This new option allows
users to allocate bandwidth across multiple traffic classes in a
single command.
This feature provides a more granular control over traffic management,
especially for scenarios requiring Enhanced Transmission Selection.
Users can now define a relative bandwidth share for each traffic class.
For example, assigning share values of 20 to TC0 (TCP/UDP) and 80 to TC5
(RoCE) will result in TC0 receiving 20% and TC5 receiving 80% of the
total bandwidth. The actual percentage each class receives depends on
the ratio of its share value to the sum of all shares.
Example:
DEV=pci/0000:08:00.0
$ devlink port function rate add $DEV/vfs_group tx_share 10Gbit \
tx_max 50Gbit tc-bw 0:20 1:0 2:0 3:0 4:0 5:80 6:0 7:0
$ devlink port function rate set $DEV/vfs_group \
tc-bw 0:20 1:0 2:0 3:0 4:0 5:20 6:60 7:0
Example usage with ynl:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-set --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1,
"rate-tc-bws": [
{"rate-tc-index": 0, "rate-tc-bw": 50},
{"rate-tc-index": 1, "rate-tc-bw": 50},
{"rate-tc-index": 2, "rate-tc-bw": 0},
{"rate-tc-index": 3, "rate-tc-bw": 0},
{"rate-tc-index": 4, "rate-tc-bw": 0},
{"rate-tc-index": 5, "rate-tc-bw": 0},
{"rate-tc-index": 6, "rate-tc-bw": 0},
{"rate-tc-index": 7, "rate-tc-bw": 0}
]
}'
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-get --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1
}'
output for rate-get:
{'bus-name': 'pci',
'dev-name': '0000:08:00.0',
'port-index': 1,
'rate-tc-bws': [{'rate-tc-bw': 50, 'rate-tc-index': 0},
{'rate-tc-bw': 50, 'rate-tc-index': 1},
{'rate-tc-bw': 0, 'rate-tc-index': 2},
{'rate-tc-bw': 0, 'rate-tc-index': 3},
{'rate-tc-bw': 0, 'rate-tc-index': 4},
{'rate-tc-bw': 0, 'rate-tc-index': 5},
{'rate-tc-bw': 0, 'rate-tc-index': 6},
{'rate-tc-bw': 0, 'rate-tc-index': 7}],
'rate-tx-max': 0,
'rate-tx-priority': 0,
'rate-tx-share': 0,
'rate-tx-weight': 0,
'rate-type': 'leaf'}
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tl;dr
=====
Add a new neighbor flag ("extern_valid") that can be used to indicate to
the kernel that a neighbor entry was learned and determined to be valid
externally. The kernel will not try to remove or invalidate such an
entry, leaving these decisions to the user space control plane. This is
needed for EVPN multi-homing where a neighbor entry for a multi-homed
host needs to be synced across all the VTEPs among which the host is
multi-homed.
Background
==========
In a typical EVPN multi-homing setup each host is multi-homed using a
set of links called ES (Ethernet Segment, i.e., LAG) to multiple leaf
switches (VTEPs). VTEPs that are connected to the same ES are called ES
peers.
When a neighbor entry is learned on a VTEP, it is distributed to both ES
peers and remote VTEPs using EVPN MAC/IP advertisement routes. ES peers
use the neighbor entry when routing traffic towards the multi-homed host
and remote VTEPs use it for ARP/NS suppression.
Motivation
==========
If the ES link between a host and the VTEP on which the neighbor entry
was locally learned goes down, the EVPN MAC/IP advertisement route will
be withdrawn and the neighbor entries will be removed from both ES peers
and remote VTEPs. Routing towards the multi-homed host and ARP/NS
suppression can fail until another ES peer locally learns the neighbor
entry and distributes it via an EVPN MAC/IP advertisement route.
"draft-rbickhart-evpn-ip-mac-proxy-adv-03" [1] suggests avoiding these
intermittent failures by having the ES peers install the neighbor
entries as before, but also injecting EVPN MAC/IP advertisement routes
with a proxy indication. When the previously mentioned ES link goes down
and the original EVPN MAC/IP advertisement route is withdrawn, the ES
peers will not withdraw their neighbor entries, but instead start aging
timers for the proxy indication.
If an ES peer locally learns the neighbor entry (i.e., it becomes
"reachable"), it will restart its aging timer for the entry and emit an
EVPN MAC/IP advertisement route without a proxy indication. An ES peer
will stop its aging timer for the proxy indication if it observes the
removal of the proxy indication from at least one of the ES peers
advertising the entry.
In the event that the aging timer for the proxy indication expired, an
ES peer will withdraw its EVPN MAC/IP advertisement route. If the timer
expired on all ES peers and they all withdrew their proxy
advertisements, the neighbor entry will be completely removed from the
EVPN fabric.
Implementation
==============
In the above scheme, when the control plane (e.g., FRR) advertises a
neighbor entry with a proxy indication, it expects the corresponding
entry in the data plane (i.e., the kernel) to remain valid and not be
removed due to garbage collection or loss of carrier. The control plane
also expects the kernel to notify it if the entry was learned locally
(i.e., became "reachable") so that it will remove the proxy indication
from the EVPN MAC/IP advertisement route. That is why these entries
cannot be programmed with dummy states such as "permanent" or "noarp".
Instead, add a new neighbor flag ("extern_valid") which indicates that
the entry was learned and determined to be valid externally and should
not be removed or invalidated by the kernel. The kernel can probe the
entry and notify user space when it becomes "reachable" (it is initially
installed as "stale"). However, if the kernel does not receive a
confirmation, have it return the entry to the "stale" state instead of
the "failed" state.
In other words, an entry marked with the "extern_valid" flag behaves
like any other dynamically learned entry other than the fact that the
kernel cannot remove or invalidate it.
One can argue that the "extern_valid" flag should not prevent garbage
collection and that instead a neighbor entry should be programmed with
both the "extern_valid" and "extern_learn" flags. There are two reasons
for not doing that:
1. Unclear why a control plane would like to program an entry that the
kernel cannot invalidate but can completely remove.
2. The "extern_learn" flag is used by FRR for neighbor entries learned
on remote VTEPs (for ARP/NS suppression) whereas here we are
concerned with local entries. This distinction is currently irrelevant
for the kernel, but might be relevant in the future.
Given that the flag only makes sense when the neighbor has a valid
state, reject attempts to add a neighbor with an invalid state and with
this flag set. For example:
# ip neigh add 192.0.2.1 nud none dev br0.10 extern_valid
Error: Cannot create externally validated neighbor with an invalid state.
# ip neigh add 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid
# ip neigh replace 192.0.2.1 nud failed dev br0.10 extern_valid
Error: Cannot mark neighbor as externally validated with an invalid state.
The above means that a neighbor cannot be created with the
"extern_valid" flag and flags such as "use" or "managed" as they result
in a neighbor being created with an invalid state ("none") and
immediately getting probed:
# ip neigh add 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid use
Error: Cannot create externally validated neighbor with an invalid state.
However, these flags can be used together with "extern_valid" after the
neighbor was created with a valid state:
# ip neigh add 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid
# ip neigh replace 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid use
One consequence of preventing the kernel from invalidating a neighbor
entry is that by default it will only try to determine reachability
using unicast probes. This can be changed using the "mcast_resolicit"
sysctl:
# sysctl net.ipv4.neigh.br0/10.mcast_resolicit
0
# tcpdump -nn -e -i br0.10 -Q out arp &
# ip neigh replace 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid use
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
# sysctl -wq net.ipv4.neigh.br0/10.mcast_resolicit=3
# ip neigh replace 192.0.2.1 lladdr 00:11:22:33:44:55 nud stale dev br0.10 extern_valid use
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > 00:11:22:33:44:55, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
62:50:1d:11:93:6f > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.0.2.1 tell 192.0.2.2, length 28
iproute2 patches can be found here [2].
[1] https://datatracker.ietf.org/doc/html/draft-rbickhart-evpn-ip-mac-proxy-adv-03
[2] https://github.com/idosch/iproute2/tree/submit/extern_valid_v1
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20250626073111.244534-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new netlink attribute to allow user space configuration of reference
sync pin pairs, where both pins are used to provide one clock signal
consisting of both: base frequency and sync signal.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20250626135219.1769350-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc4).
Conflicts:
Documentation/netlink/specs/mptcp_pm.yaml
9e6dd4c256d0 ("netlink: specs: mptcp: replace underscores with dashes in names")
ec362192aa9e ("netlink: specs: fix up indentation errors")
https://lore.kernel.org/20250626122205.389c2cd4@canb.auug.org.au
Adjacent changes:
Documentation/netlink/specs/fou.yaml
791a9ed0a40d ("netlink: specs: fou: replace underscores with dashes in names")
880d43ca9aa4 ("netlink: specs: clean up spaces in brackets")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a regexp to make sure all names which may end up being visible
to the user consist of lower case characters, numbers and dashes.
Underscores keep sneaking into the specs, which is not visible
in the C code but makes the Python and alike inconsistent.
Note that starting with a number is okay, as in C the full
name will include the family name.
For legacy families we can't enforce the naming in the family
name or the multicast group names, as these are part of the
binary uAPI of the kernel.
For classic netlink we need to allow capital letters in names
of struct members. TC has some structs with capitalized members.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: a1bcfde83669 ("doc/netlink/specs: Add a spec for tc")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: b2f63d904e72 ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: bc8aeb2045e2 ("Documentation: netlink: add a YAML spec for mptcp")
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250624211002.3475021-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 93b230b549bc ("netlink: specs: add ynl spec for ovs_flow")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20250624211002.3475021-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 429ac6211494 ("devlink: define enum for attr types of dynamic attributes")
Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen replaces special chars in names)
but gives more uniform naming in Python.
Fixes: 13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash")
Fixes: 46fb3ba95b93 ("ethtool: Add an interface for flashing transceiver modules' firmware")
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 4eb77b4ecd3c ("netlink: add a proto specification for FOU")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: 13727f85b49b ("NFSD: introduce netlink stubs")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250624211002.3475021-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for RSS_SET handling in ethnl introduce Netlink
notifications for RSS. Only cover modifications, not creation
and not removal of a context, because the latter may deserve
a different notification type. We should cross that bridge
when we add the support for context add / remove via Netlink.
Link: https://patch.msgid.link/20250623231720.3124717-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the multicast group's name to the YAML spec.
Without it YNL doesn't know how to subscribe to notifications.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250623231720.3124717-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch expands the status information provided by ethtool for PSE c33
with current port priority and max port priority. It also adds a call to
pse_ethtool_set_prio() to configure the PSE port priority.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-8-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch introduces the ability to configure the PSE PI budget evaluation
strategies. Budget evaluation strategies is utilized by PSE controllers to
determine which ports to turn off first in scenarios such as power budget
exceedance.
The pis_prio_max value is used to define the maximum priority level
supported by the controller. Both the current priority and the maximum
priority are exposed to the user through the pse_ethtool_get_status call.
This patch add support for two mode of budget evaluation strategies.
1. Static Method:
This method involves distributing power based on PD classification.
It’s straightforward and stable, the PSE core keeping track of the
budget and subtracting the power requested by each PD’s class.
Advantages: Every PD gets its promised power at any time, which
guarantees reliability.
Disadvantages: PD classification steps are large, meaning devices
request much more power than they actually need. As a result, the power
supply may only operate at, say, 50% capacity, which is inefficient and
wastes money.
Priority max value is matching the number of PSE PIs within the PSE.
2. Dynamic Method:
To address the inefficiencies of the static method, vendors like
Microchip have introduced dynamic power budgeting, as seen in the
PD692x0 firmware. This method monitors the current consumption per port
and subtracts it from the available power budget. When the budget is
exceeded, lower-priority ports are shut down.
Advantages: This method optimizes resource utilization, saving costs.
Disadvantages: Low-priority devices may experience instability.
Priority max value is set by the PSE controller driver.
For now, budget evaluation methods are not configurable and cannot be
mixed. They are hardcoded in the PSE driver itself, as no current PSE
controller supports both methods.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-7-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report the index of the newly introduced PSE power domain to the user,
enabling improved management of the power budget for PSE devices.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-5-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for devm_pse_irq_helper() to register PSE interrupts and report
events such as over-current or over-temperature conditions. This follows a
similar approach to the regulator API but also sends notifications using a
dedicated PSE ethtool netlink socket.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-2-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit under fixes switched to uAPI generation from the YAML
spec. A number of custom defines were left behind, mostly
for commands very hard to express in YAML spec.
Among what was left behind was the name and version of
the generic netlink family. Problem is that the codegen
always outputs those values so we ended up with a duplicated,
differently named set of defines.
Provide naming info in YAML and remove the incorrect defines.
Fixes: 8d0580c6ebdd ("ethtool: regenerate uapi header from the spec")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250617202240.811179-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add enum dpll_feature_state for control over features.
Add dpll device level attribute:
DPLL_A_PHASE_OFFSET_MONITOR - to allow control over a phase offset monitor
feature. Attribute is present and shall return current state of a feature
(enum dpll_feature_state), if the device driver provides such capability,
otherwie attribute shall not be present.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up the remaining yamllint warnings in the netlink specs:
[warning] comment not indented like content (comments-indentation)
[error] too many spaces after colon (colons)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-8-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all line too long errors reported by yamllint in the netlink
specs, e.g.
error line too long (97 > 80 characters) (line-length)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-7-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all indentation related errors reported by yamllint in the
netlink specs, e.g.
error wrong indentation: expected 6 but found 5 (indentation)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-6-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all truthy value warnings reported by yamllint in the
netlink specs:
warning truthy value should be one of [false, true] (truthy)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all comments warnings reported by yamllint in the netlink specs:
warning too few spaces before comment: expected 2 (comments)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all space inside brackets errors reported by yamllint in
the netlink specs:
error too many spaces inside brackets (brackets)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clean up all document-start warnings reported by yamllint in the
netlink specs:
warning missing document start "---" (document-start)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> # mptcp_pm.yaml
Link: https://patch.msgid.link/20250610125944.85265-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Driver tests now require GRE tunnels, while we don't configure
them with YNL, YNL will complain when it sees link types it
doesn't recognize. Teach it decoding ip6gre tunnels. The attrs
are largely the same as IPv4 GRE.
Correct the type of encap-limit, but note that this attr is
only used in ip6gre, so the mistake didn't matter until now.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250603135357.502626-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A number of fields in the ip tunnels are lacking the big-endian
designation. I suspect this is not intentional, as decoding
the ports with the right endian seems objectively beneficial.
Fixes: 6ffdbb93a59c ("netlink: specs: rt_link: decode ip6tnl, vti and vti6 link attrs")
Fixes: 077b6022d24b ("doc/netlink/specs: Add sub-message type to rt_link family")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250603135357.502626-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Multi-PTP source support within a network topology has been merged,
but the hardware timestamp source is not yet exposed to users.
Currently, users only see the PTP index, which does not indicate
whether the timestamp comes from a PHY or a MAC.
Add support for reporting the hwtstamp source using a
hwtstamp-source field, alongside hwtstamp-phyindex, to describe
the origin of the hardware timestamp.
Remove HWTSTAMP_SOURCE_UNSPEC enum value as it is not used at all.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250519-feature_ptp_source-v4-1-5d10e19a0265@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Hook TC qdisc dump in the TC qdisc get, it only supported doit
until now and dumping will be used by the sample code.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All attribute sets and messages are prefixed with tc-.
The C codegen also adds the family name to all structs.
We end up with names like struct tc_tc_act_attrs.
Remove the tc- prefixes to shorten the names.
This should not impact Python as the attr set names
are never exposed to user, they are only used to refer
to things internally, in the encoder / decoder.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add naming info needed by C code gen.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a define in the uAPI header called tc_gen which expands
to the "generic" TC action fields. This helps other actions include
the base fields without having to deal with nested structs.
A couple of actions (sample, gact) do not define extra fields,
so the spec used a common tc-gen struct for both of them.
Unfortunately this struct does not exist in C. Let's use gact's
(generic act's) struct for basic actions.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tc-act-stats-attrs and tca-stats-attrs are almost identical.
The only difference is that the latter has sub-message decoding
for app, rather than declaring it as a binary attr.
tc-act-police-attrs and tc-police-attrs are identical but for
the TODO annotations.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
C naming info for OVPN which was added since I adjusted
the existing attrs. Also add missing reference to a header needed
for a bridge struct.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc7).
Conflicts:
tools/testing/selftests/drivers/net/hw/ncdevmem.c
97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array")
2f1a805f32ba ("selftests: ncdevmem: Implement devmem TCP TX")
https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au
Adjacent changes:
net/core/devmem.c
net/core/devmem.h
0afc44d8cdf6 ("net: devmem: fix kernel panic when netlink socket close after module unload")
bd61848900bf ("net: devmem: Implement TX path")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some TC filters have actions listed as indexed arrays of nests
and some as just nests. They are all indexed arrays, the handling
is common across filters.
Fixes: 2267672a6190 ("doc/netlink/specs: Update the tc spec")
Link: https://patch.msgid.link/20250513221638.842532-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix up spelling of two attribute names. These are clearly typoes
and will prevent C codegen from working. Let's treat this as
a fix to get the correction into users' hands ASAP, and prevent
anyone depending on the wrong names.
Fixes: a1bcfde83669 ("doc/netlink/specs: Add a spec for tc")
Link: https://patch.msgid.link/20250513221316.841700-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add bind-tx netlink call to attach dmabuf for TX; queue is not
required, only ifindex and dmabuf fd for attachment.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508004830.4100853-4-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devconf is even odder than SNMP. On input it reports an array of u32s
which seem to be indexed by the enum values - 1. On output kernel
expects a nest where each attr has the enum type as the nla type.
sub-type: u32 is probably best we can do right now.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250506194101.696272-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
uAPI doesn't define structs for the SNMP counters, just enums to index
them as arrays. Switch to the same representation in the spec. C codegen
will soon need all the struct types to actually exist.
Note that the existing definition was broken, anyway, as the first
member should be the number of counters reported.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250506194101.696272-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
C codegen will soon support using struct types for binary attrs.
Correct the struct names in OvS specs.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250506194101.696272-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
C codegen will soon use structs for binary types. A handful of structs
in WiFi carry information elements from the wire, defined by the standard.
The structs are not part of uAPI, so we can't use them in C directly.
We could add them to the uAPI or add some annotation to tell the codegen
to output a local version to the user header. The former seems arbitrary
since we don't expose structs for most of the standard. The latter seems
like a lot of work for a rare occurrence. Drop the struct info for now.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/004030652d592b379e730be2f0344bebc4a03475.camel@sipsolutions.net
Link: https://patch.msgid.link/20250506194101.696272-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Devlink param and health reporter fmsg use attributes with dynamic type
which is determined according to a different type. Currently used values
are NLA_*. The problem is, they are not part of UAPI. They may change
which would cause a break.
To make this future safe, introduce a enum that shadows NLA_* values in
it and is part of UAPI.
Also, this allows to possibly carry types that are unrelated to NLA_*
values.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250505114513.53370-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc5).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The phy-upstream enum is already defined in the ethtool.h UAPI header
and used by the ethtool userspace tool. However, the ethtool spec does
not reference it, causing YNL to auto-generate a duplicate and redundant
enum.
Fix this by updating the spec to reference the existing UAPI enum
in ethtool.h.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250425171419.947352-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add properties needed for C codegen to match names with uAPI headers.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250418021706.1967583-13-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The notify property should point at the object the notifications
carry, usually the get object, not the cmd which triggers
the notification:
notify:
description: Name of the command sharing the reply type with
this notification.
Not treating this as a fix, I think that only C codegen cares.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250418021706.1967583-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The consistency check complains replies to do and dump don't match
because dump has no value. It doesn't have to by the schema... but
fixing this in code gen would be more code than adjusting the spec.
This is rare.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250418021706.1967583-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add properties needed for C codegen to match names with uAPI headers.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250418021706.1967583-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a notification entry for netlink so that we can test ntf handling
in classic netlink and C.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250418021706.1967583-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ns-ip6-target is an indexed-array. Codegen for variable size binary
array would be a bit tedious, tell C that we know the size of these
attributes, since they are IPv6 addrs.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250418021706.1967583-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The AF nest is indexed by AF ID, so it's a bit strange,
but with minor adjustments C codegen deals with it just fine.
Entirely unclear why the names have been in quotes here.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250418021706.1967583-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add properties needed for C codegen to match names with uAPI headers.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250418021706.1967583-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
group is listed twice for newlink.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250418021706.1967583-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
if-netnsid an alias to target-netnsid:
IFLA_TARGET_NETNSID = IFLA_IF_NETNSID, /* new alias */
We don't have a definition for this attr.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250418021706.1967583-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The purpose of the attribute list is to list the attributes
which will be included in a given message to shrink the objects
for families with huge attr spaces. Fixed headers are always
present in their entirety (between netlink header and the attrs)
so there's no point in listing their members. Current C codegen
doesn't expect them and tries to look them up in the attribute space.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250418021706.1967583-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rt-link has a number of disjoint headers, plus it uses attributes
of other families (e.g. DPLL). Allow declaring a attribute set
as "foreign" by specifying which header its definition is coming
from.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250418021706.1967583-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc3).
No conflicts. Adjacent changes:
tools/net/ynl/pyynl/ynl_gen_c.py
4d07bbf2d456 ("tools: ynl-gen: don't declare loop iterator in place")
7e8ba0c7de2b ("tools: ynl: don't use genlmsghdr in classic netlink")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add basic infrastructure for handling ovpn interfaces.
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-3-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This commit introduces basic netlink support with family
registration/unregistration functionalities and stub pre/post-doit.
More importantly it introduces the YAML uAPI description along
with its auto-generated files:
- include/uapi/linux/ovpn.h
- drivers/net/ovpn/netlink-gen.c
- drivers/net/ovpn/netlink-gen.h
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-2-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Attach ndm- to all members of struct nfmsg. We could possibly
use name-prefix just for C, but I don't think we have any precedent
for using name-prefix on structs, and other rtnetlink sub-specs
give full names for fixed header struct members.
Fixes: bc515ed06652 ("netlink: specs: Add a spec for neighbor tables in rtnetlink")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414211851.602096-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MCTP attribute naming is inconsistent. In C we have:
IFLA_MCTP_NET,
IFLA_MCTP_PHYS_BINDING,
^^^^
but in YAML:
- mctp-net
- phys-binding
^
no "mctp"
It's unclear whether the "mctp" part of the name is supposed
to be a prefix or part of attribute name. Make it a prefix,
seems cleaner, even tho technically phys-binding was added later.
Fixes: b2f63d904e72 ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414211851.602096-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some attribute names diverge in very minor ways from the C names.
These are most likely typos, and they prevent the C codegen from
working.
Fixes: bc515ed06652 ("netlink: specs: Add a spec for neighbor tables in rtnetlink")
Fixes: b2f63d904e72 ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414211851.602096-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
alt-ifname attr is directly placed in requests (as an alternative
to ifname) but in responses its wrapped up in IFLA_PROP_LIST
and only there is may be multi-attr. See rtnl_fill_prop_list().
Fixes: b2f63d904e72 ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414211851.602096-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We started generating C code for OvS a while back, but actually
C codegen only supports fixed headers specified at the family
level right now (schema also allows specifying them per op).
ovs_flow and ovs_datapath already specify the fixed header
at the family level but ovs_vport does it per op.
Move the property, all ops use the same header.
This ensures YNL C sees the correct hdr_len:
const struct ynl_family ynl_ovs_vport_family = {
.name = "ovs_vport",
- .hdr_len = sizeof(struct genlmsghdr),
+ .hdr_len = sizeof(struct genlmsghdr) + sizeof(struct ovs_header),
};
Fixes: 7c59c9c8f202 ("tools: ynl: generate code for ovs families")
Link: https://patch.msgid.link/20250409145541.580674-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add properties needed for C codegen to match names with uAPI headers.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add properties needed for C codegen to match names with uAPI headers.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The purpose of the attribute list is to list the attributes
which will be included in a given message to shrink the objects
for families with huge attr spaces. Fixed headers are always
present in their entirety (between netlink header and the attrs)
so there's no point in listing their members. Current C codegen
doesn't expect them and tries to look them up in the attribute space.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The purpose of the attribute list is to list the attributes
which will be included in a given message to shrink the objects
for families with huge attr spaces. Fixed headers are always
present in their entirety (between netlink header and the attrs)
so there's no point in listing their members. Current C codegen
doesn't expect them and tries to look them up in the attribute space.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The C codegen currently stores the fixed-header as part of family
info, so it only supports one fixed-header type per spec. Luckily
all rtm route message have the same fixed header so just move it up
to the higher level.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rtnetlink family names are set to rt-$name within the YAML
but the files are called rt_$name. C codegen assumes that the
generated file name will match the family. The use of dashes
is in line with our general expectation that name properties
in the spec use dashes not underscores (even tho, as Donald
points out most genl families use underscores in the name).
We have 3 un-ideal options to choose from:
- accept the slight inconsistency with old families using _, or
- accept the slight annoyance with all languages having to do s/-/_/
when looking up family ID, or
- accept the inconsistency with all name properties in new YAML spec
being separated with - and just the family name always using _.
Pick option 1 and rename the rtnl spec files.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
YAML specs don't normally include the C prefix name in the name
of the YAML attr. Remove the ifa- prefix from all attributes
in route-attrs and metrics and specify name-prefix instead.
This is a bit risky, hopefully there aren't many users out there.
Fixes: 023289b4f582 ("doc/netlink: Add spec for rt route messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
YAML specs don't normally include the C prefix name in the name
of the YAML attr. Remove the ifa- prefix from all attributes
in addr-attrs and specify name-prefix instead.
This is a bit risky, hopefully there aren't many users out there.
Fixes: dfb0f7d9d979 ("doc/netlink: Add spec for rt addr messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Command names should match C defines, codegens may depend on it.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 4f280376e531 ("selftests/net: Add selftest for IPv4 RTM_GETMULTICAST support")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The spec is mis-formatted, schema validation says:
Failed validating 'type' in schema['properties']['operations']['properties']['list']['items']['properties']['dump']['properties']['request']['properties']['value']:
{'minimum': 0, 'type': 'integer'}
On instance['operations']['list'][3]['dump']['request']['value']:
'58 - ifa-family'
The ifa-family clearly wants to be part of an attribute list.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Yuyang Huang <yuyanghuang@google.com>
Fixes: 4f280376e531 ("selftests/net: Add selftest for IPv4 RTM_GETMULTICAST support")
Link: https://patch.msgid.link/20250403013706.2828322-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull nfsd updates from Chuck Lever:
"Neil Brown contributed more scalability improvements to NFSD's open
file cache, and Jeff Layton contributed a menagerie of repairs to
NFSD's NFSv4 callback / backchannel implementation.
Mike Snitzer contributed a change to NFS re-export support that
disables support for file locking on a re-exported NFSv4 mount. This
is because NFSv4 state recovery is currently difficult if not
impossible for re-exported NFS mounts. The change aims to prevent data
integrity exposures after the re-export server crashes.
Work continues on the evolving NFSD netlink administrative API.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.15 development cycle"
* tag 'nfsd-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (45 commits)
NFSD: Add a Kconfig setting to enable delegated timestamps
sysctl: Fixes nsm_local_state bounds
nfsd: use a long for the count in nfsd4_state_shrinker_count()
nfsd: remove obsolete comment from nfs4_alloc_stid
nfsd: remove unneeded forward declaration of nfsd4_mark_cb_fault()
nfsd: reorganize struct nfs4_delegation for better packing
nfsd: handle errors from rpc_call_async()
nfsd: move cb_need_restart flag into cb_flags
nfsd: replace CB_GETATTR_BUSY with NFSD4_CALLBACK_RUNNING
nfsd: eliminate cl_ra_cblist and NFSD4_CLIENT_CB_RECALL_ANY
nfsd: prevent callback tasks running concurrently
nfsd: disallow file locking and delegations for NFSv4 reexport
nfsd: filecache: drop the list_lru lock during lock gc scans
nfsd: filecache: don't repeatedly add/remove files on the lru list
nfsd: filecache: introduce NFSD_FILE_RECENT
nfsd: filecache: use list_lru_walk_node() in nfsd_file_gc()
nfsd: filecache: use nfsd_file_dispose_list() in nfsd_file_close_inode_sync()
NFSD: Re-organize nfsd_file_gc_worker()
nfsd: filecache: remove race handling.
fs: nfs: acl: Avoid -Wflex-array-member-not-at-end warning
...
|
|
Add a missing attribute of board serial number.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250320085947.103419-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No functional changes. Next patches will add more granular locking
to netdev_nl_sock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The legacy rpc.nfsd tool will set the nlm_grace_period if the NFSv4
grace period is set. nfsdctl is missing this functionality, so add a new
netlink control interface for lockd that it can use. For now, it only
allows setting the grace period, and the tcp and udp listener ports.
lockd currently uses module parameters and sysctls for configuration, so
all of its settings are global. With this change, lockd now tracks these
values on a per-net-ns basis. It will only fall back to using the global
values if any of them are 0.
Finally, as a backward compatibility measure, if updating the nlm
settings in the init_net namespace, also update the legacy global
values to match.
Link: https://issues.redhat.com/browse/RHEL-71698
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since commit 05c1280a2bcf ("netdev_features: convert NETIF_F_NETNS_LOCAL to
dev->netns_local"), there is no way to see if the netns_immutable property
s set on a device. Let's add a netlink attribute to advertise it.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the port range to rt_link, example:
# tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "geneve1"}' --output-json | jq
{
"ifname": "geneve1",
[...]
"linkinfo": {
"kind": "geneve",
"data": {
"id": 1000,
"remote": "147.28.227.100",
"udp-csum": 0,
"ttl": 0,
"tos": 0,
"label": 0,
"df": 0,
"port": 49431,
"udp-zero-csum6-rx": 1,
"ttl-inherit": 0,
"port-range": {
"low": 4000,
"high": 5000
}
}
},
[...]
}
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20250226182030.89440-2-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new DSCP mask attribute to the spec. Example:
# ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \
--do newrule \
--json '{"family": 2, "dscp": 10, "dscp-mask": 63, "action": 1, "table": 1}'
None
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \
--dump getrule --json '{"family": 2}' --output-json | jq '.[]'
[...]
{
"table": 1,
"suppress-prefixlen": "0xffffffff",
"protocol": 0,
"priority": 32765,
"dscp": 10,
"dscp-mask": "0x3f",
"family": 2,
"dst-len": 0,
"src-len": 0,
"tos": 0,
"action": "to-tbl",
"flags": 0
}
[...]
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20250220080525.831924-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-02-20
We've added 19 non-merge commits during the last 8 day(s) which contain
a total of 35 files changed, 1126 insertions(+), 53 deletions(-).
The main changes are:
1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing
2) Add network TX timestamping support to BPF sock_ops, from Jason Xing
3) Add TX metadata Launch Time support, from Song Yoong Siang
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
igc: Add launch time support to XDP ZC
igc: Refactor empty frame insertion for launch time support
net: stmmac: Add launch time support to XDP ZC
selftests/bpf: Add launch time request to xdp_hw_metadata
xsk: Add launch time hardware offload support to XDP Tx metadata
selftests/bpf: Add simple bpf tests in the tx path for timestamping feature
bpf: Support selective sampling for bpf timestamping
bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback
net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING
bpf: Disable unsafe helpers in TX timestamping callbacks
bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback
bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping
bpf: Add networking timestamping support to bpf_get/setsockopt()
selftests/bpf: Add rto max for bpf_setsockopt test
bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt
====================
Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the XDP Tx metadata framework so that user can requests launch time
hardware offload, where the Ethernet device will schedule the packet for
transmission at a pre-determined time called launch time. The value of
launch time is communicated from user space to Ethernet driver via
launch_time field of struct xsk_tx_metadata.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250216093430.957880-2-yoong.siang.song@intel.com
|
|
Add new port mask attributes to the spec. Example:
# ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \
--do newrule \
--json '{"family": 2, "sport-range": { "start": 12345, "end": 12345 }, "sport-mask": 65535, "action": 1, "table": 1}'
None
# ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \
--do newrule \
--json '{"family": 2, "dport-range": { "start": 54321, "end": 54321 }, "dport-mask": 65535, "action": 1, "table": 2}'
None
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \
--dump getrule --json '{"family": 2}' --output-json | jq '.[]'
[...]
{
"table": 2,
"suppress-prefixlen": "0xffffffff",
"protocol": 0,
"priority": 32764,
"dport-range": {
"start": 54321,
"end": 54321
},
"dport-mask": "0xffff",
"family": 2,
"dst-len": 0,
"src-len": 0,
"tos": 0,
"action": "to-tbl",
"flags": 0
}
{
"table": 1,
"suppress-prefixlen": "0xffffffff",
"protocol": 0,
"priority": 32765,
"sport-range": {
"start": 12345,
"end": 12345
},
"sport-mask": "0xffff",
"family": 2,
"dst-len": 0,
"src-len": 0,
"tos": 0,
"action": "to-tbl",
"flags": 0
}
[...]
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Could be just me, but I had to pause and double check that the Tx csum
counter in qstat should include GSO'd packets. GSO pretty much implies
csum so one could possibly interpret the csum counter as pure csum offload.
But the counters are based on virtio:
[tx_needs_csum]
The number of packets which require checksum calculation by the device.
[rx_needs_csum]
The number of packets with VIRTIO_NET_HDR_F_NEEDS_CSUM.
and VIRTIO_NET_HDR_F_NEEDS_CSUM gets set on GSO packets virtio sends.
Clarify this in the spec to avoid any confusion.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250214224601.2271201-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose a new per-queue nest attribute, xsk, which will be present for
queues that are being used for AF_XDP. If the queue is not being used for
AF_XDP, the nest will not be present.
In the future, this attribute can be extended to include more data about
XSK as it is needed.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds support to dump the connection tracking table
("conntrack -L") and the conntrack statistics, ("conntrack -S").
Example conntrack dump:
tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/conntrack.yaml --dump get
[{'id': 59489769,
'mark': 0,
'nfgen-family': 2,
'protoinfo': {'protoinfo-tcp': {'tcp-flags-original': {'flags': {'maxack',
'sack-perm',
'window-scale'},
'mask': set()},
'tcp-flags-reply': {'flags': {'maxack',
'sack-perm',
'window-scale'},
'mask': set()},
'tcp-state': 'established',
'tcp-wscale-original': 7,
'tcp-wscale-reply': 8}},
'res-id': 0,
'secctx': {'secctx-name': 'system_u:object_r:unlabeled_t:s0'},
'status': {'assured',
'confirmed',
'dst-nat-done',
'seen-reply',
'src-nat-done'},
'timeout': 431949,
'tuple-orig': {'tuple-ip': {'ip-v4-dst': '34.107.243.93',
'ip-v4-src': '192.168.0.114'},
'tuple-proto': {'proto-dst-port': 443,
'proto-num': 6,
'proto-src-port': 37104}},
'tuple-reply': {'tuple-ip': {'ip-v4-dst': '192.168.0.114',
'ip-v4-src': '34.107.243.93'},
'tuple-proto': {'proto-dst-port': 37104,
'proto-num': 6,
'proto-src-port': 443}},
'use': 1,
'version': 0},
{'id': 3402229480,
Example stats dump:
tools/net/ynl/pyynl/cli.py --spec Documentation/netlink/specs/conntrack.yaml --dump get-stats
[{'chain-toolong': 0,
'clash-resolve': 3,
'drop': 0,
....
Changes since last iteration:
- Address comments from Donald Hunter, in particular, fixup "get" and
"get-stats" descriptions, the former operation supports both dump
and normal request (returns a single entry, if found), the latter
only supports dumps.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250210152159.41077-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a rudimentary YNL spec for nl80211 that covers get-wiphy,
get-interface and get-protocol-features.
./tools/net/ynl/pyynl/cli.py --family nl80211 \
--do get-protocol-features
{'protocol-features': {'split-wiphy-dump'}}
./tools/net/ynl/pyynl/cli.py --family nl80211 \
--dump get-wiphy --json '{ "split-wiphy-dump": true }'
./tools/net/ynl/pyynl/cli.py --family nl80211 \
--dump get-interface
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Link: https://patch.msgid.link/20250211120127.84858-11-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add s8 and s16 types to the genetlink schemas to align scalar types
across all schemas.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250211120127.84858-10-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Nested structs are already supported in netlink-raw. Add the same
capability to the genetlink legacy schema.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250211120127.84858-9-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This change introduces a new selftest case to verify the functionality
of dumping IPv4 multicast addresses using the RTM_GETMULTICAST netlink
message. The test utilizes the ynl library to interact with the
netlink interface and validate that the kernel correctly reports the
joined IPv4 multicast addresses.
To run the test, execute the following command:
$ vng -v --user root --cpus 16 -- \
make -C tools/testing/selftests TARGETS=net \
TEST_PROGS=rtnetlink.py TEST_GEN_PROGS="" run_tests
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://patch.msgid.link/20250207110836.2407224-2-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the netlink type for hardware timestamp flags, which are represented
as a bitset of flags. Although only one flag is supported currently, the
correct netlink bitset type should be used instead of u32 to keep
consistency with other fields. Address this by adding a new named string
set description for the hwtstamp flag structure.
The code has been introduced in the current release so the uAPI change is
still okay.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Fixes: 6e9e2eed4f39 ("net: ethtool: Add support for tsconfig command to get/set hwtstamp config")
Link: https://patch.msgid.link/20250205110304.375086-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
David Wei says:
====================
io_uring zero copy rx
This patchset contains net/ patches needed by a new io_uring request
implementing zero copy rx into userspace pages, eliminating a kernel
to user copy.
We configure a page pool that a driver uses to fill a hw rx queue to
hand out user pages instead of kernel pages. Any data that ends up
hitting this hw rx queue will thus be dma'd into userspace memory
directly, without needing to be bounced through kernel memory. 'Reading'
data out of a socket instead becomes a _notification_ mechanism, where
the kernel tells userspace where the data is. The overall approach is
similar to the devmem TCP proposal.
This relies on hw header/data split, flow steering and RSS to ensure
packet headers remain in kernel memory and only desired flows hit a hw
rx queue configured for zero copy. Configuring this is outside of the
scope of this patchset.
We share netdev core infra with devmem TCP. The main difference is that
io_uring is used for the uAPI and the lifetime of all objects are bound
to an io_uring instance. Data is 'read' using a new io_uring request
type. When done, data is returned via a new shared refill queue. A zero
copy page pool refills a hw rx queue from this refill queue directly. Of
course, the lifetime of these data buffers are managed by io_uring
rather than the networking stack, with different refcounting rules.
This patchset is the first step adding basic zero copy support. We will
extend this iteratively with new features e.g. dynamically allocated
zero copy areas, THP support, dmabuf support, improved copy fallback,
general optimisations and more.
In terms of netdev support, we're first targeting Broadcom bnxt. Patches
aren't included since Taehee Yoo has already sent a more comprehensive
patchset adding support in [1]. Google gve should already support this,
and Mellanox mlx5 support is WIP pending driver changes.
===========
Performance
===========
Note: Comparison with epoll + TCP_ZEROCOPY_RECEIVE isn't done yet.
Test setup:
* AMD EPYC 9454
* Broadcom BCM957508 200G
* Kernel v6.11 base [2]
* liburing fork [3]
* kperf fork [4]
* 4K MTU
* Single TCP flow
With application thread + net rx softirq pinned to _different_ cores:
+-------------------------------+
| epoll | io_uring |
|-----------|-------------------|
| 82.2 Gbps | 116.2 Gbps (+41%) |
+-------------------------------+
Pinned to _same_ core:
+-------------------------------+
| epoll | io_uring |
|-----------|-------------------|
| 62.6 Gbps | 80.9 Gbps (+29%) |
+-------------------------------+
=====
Links
=====
Broadcom bnxt support:
[1]: https://lore.kernel.org/20241003160620.1521626-8-ap420073@gmail.com
Linux kernel branch including io_uring bits:
[2]: https://github.com/isilence/linux.git zcrx/v13
liburing for testing:
[3]: https://github.com/isilence/liburing.git zcrx/next
kperf for testing:
[4]: https://git.kernel.dk/kperf.git
====================
Link: https://patch.msgid.link/20250204215622.695511-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a nested attribute for io_uring memory provider info. For now it is
empty and its presence indicates that a particular page pool or queue
has an io_uring memory provider attached.
$ ./cli.py --spec netlink/specs/netdev.yaml --dump page-pool-get
[{'id': 80,
'ifindex': 2,
'inflight': 64,
'inflight-mem': 262144,
'napi-id': 525},
{'id': 79,
'ifindex': 2,
'inflight': 320,
'inflight-mem': 1310720,
'io_uring': {},
'napi-id': 525},
...
$ ./cli.py --spec netlink/specs/netdev.yaml --dump queue-get
[{'id': 0, 'ifindex': 1, 'type': 'rx'},
{'id': 0, 'ifindex': 1, 'type': 'tx'},
{'id': 0, 'ifindex': 2, 'napi-id': 513, 'type': 'rx'},
{'id': 1, 'ifindex': 2, 'napi-id': 514, 'type': 'rx'},
...
{'id': 12, 'ifindex': 2, 'io_uring': {}, 'napi-id': 525, 'type': 'rx'},
...
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250204215622.695511-6-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support using defines / constants in integer checks.
Carolina will need this for rate API extensions.
Reported-by: Carolina Jubran <cjubran@nvidia.com>
Link: https://lore.kernel.org/1e886aaf-e1eb-4f1a-b7ef-f63b350a3320@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250203215510.1288728-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For packets with two-step timestamp requests, the hardware timestamp
comes back to the driver through a confirmation mechanism of sorts,
which allows the driver to confidently bump the successful "pkts"
counter.
For one-step PTP, the NIC is supposed to autonomously insert its
hardware TX timestamp in the packet headers while simultaneously
transmitting it. There may be a confirmation that this was done
successfully, or there may not.
None of the current drivers which implement ethtool_ops :: get_ts_stats()
also support HWTSTAMP_TX_ONESTEP_SYNC or HWTSTAMP_TX_ONESTEP_SYNC, so it
is a bit unclear which model to follow. But there are NICs, such as DSA,
where there is no transmit confirmation at all. Here, it would be wrong /
misleading to increment the successful "pkts" counter, because one-step
PTP packets can be dropped on TX just like any other packets.
So introduce a special counter which signifies "yes, an attempt was made,
but we don't know whether it also exited the port or not". I expect that
for one-step PTP packets where a confirmation is available, the "pkts"
counter would be bumped.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250116104628.123555-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The hds-thresh option configures the threshold value of
the header-data-split.
If a received packet size is larger than this threshold value, a packet
will be split into header and payload.
The header indicates TCP and UDP header, but it depends on driver spec.
The bnxt_en driver supports HDS(Header-Data-Split) configuration at
FW level, affecting TCP and UDP too.
So, If hds-thresh is set, it affects UDP and TCP packets.
Example:
# ethtool -G <interface name> hds-thresh <value>
# ethtool -G enp14s0f0np0 tcp-data-split on hds-thresh 256
# ethtool -g enp14s0f0np0
Ring parameters for enp14s0f0np0:
Pre-set maximums:
...
HDS thresh: 1023
Current hardware settings:
...
TCP data split: on
HDS thresh: 256
The default/min/max values are not defined in the ethtool so the drivers
should define themself.
The 0 value means that all TCP/UDP packets' header and payload
will be split.
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-3-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some of our tests load vti and ip6tnl so not being able to decode
the link attrs gets in the way of using Python YNL for testing.
Decode link attributes for ip6tnl, vti and vti6.
ip6tnl uses IFLA_IPTUN_FLAGS as u32, while ipv4 and sit expect
a u16 attribute, so we have a (first?) subset type override...
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250107022820.2087101-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2025-01-07
We've added 7 non-merge commits during the last 32 day(s) which contain
a total of 11 files changed, 190 insertions(+), 103 deletions(-).
The main changes are:
1) Migrate the test_xdp_meta.sh BPF selftest into test_progs
framework, from Bastien Curutchet.
2) Add ability to configure head/tailroom for netkit devices,
from Daniel Borkmann.
3) Fixes and improvements to the xdp_hw_metadata selftest,
from Song Yoong Siang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Extend netkit tests to validate set {head,tail}room
netkit: Add add netkit {head,tail}room to rt_link.yaml
netkit: Allow for configuring needed_{head,tail}room
selftests/bpf: Migrate test_xdp_meta.sh into xdp_context_test_run.c
selftests/bpf: test_xdp_meta: Rename BPF sections
selftests/bpf: Enable Tx hwtstamp in xdp_hw_metadata
selftests/bpf: Actuate tx_metadata_len in xdp_hw_metadata
====================
Link: https://patch.msgid.link/20250107130908.143644-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add netkit {head,tail}room attribute support to the rt_link.yaml spec file.
Example:
# ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "nk0"}' --output-json | jq
[...]
"linkinfo": {
"kind": "netkit",
"data": {
"primary": 0,
"policy": "forward",
"mode": "l3",
"scrub": "default",
"headroom": 0,
"tailroom": 0,
"peer-policy": "forward",
"peer-scrub": "default"
}
},
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/bpf/20241220234658.490686-2-daniel@iogearbox.net
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc6).
No conflicts.
Adjacent changes:
include/linux/if_vlan.h
f91a5b808938 ("af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK")
3f330db30638 ("net: reformat kdoc return statements")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two operations didn't have a small description. It looks like something
that has been missed in the original commit introducing this file.
Replace the two "todo" by a small and simple description: Create/Destroy
subflow.
While at it, also uniform the capital letters, avoid double spaces, and
fix the "announce" event description: a new "address" has been
announced, not a new "subflow".
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-3-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rendered version of the MPTCP events [1] looked strange, because the
whole content of the 'doc' was displayed in the same block.
It was then not clear that the first words, not even ended by a period,
were the attributes that are defined when such events are emitted. These
attributes have now been moved to the end, prefixed by 'Attributes:' and
ended with a period. Note that '>-' has been added after 'doc:' to allow
':' in the text below.
The documentation in the UAPI header has been auto-generated by:
./tools/net/ynl/ynl-regen.sh
Link: https://docs.kernel.org/networking/netlink_spec/mptcp_pm.html#event-type [1]
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-2-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This attribute is added with the 'created' and 'established' events, but
the documentation didn't mention it.
The documentation in the UAPI header has been auto-generated by:
./tools/net/ynl/ynl-regen.sh
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241221-net-mptcp-netlink-specs-pm-doc-fixes-v2-1-e54f2db3f844@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the new flow label attribute to the spec. Example:
# ip link add name dummy1 up type dummy
# ip -6 route add default table 254 dev dummy1
# ip -6 route add default table 10 dev dummy1
# ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \
--do newrule \
--json '{"family": 10, "priority": 1, "flowlabel": 10, "flowlabel-mask": 255, "action": 1, "table": 10}'
None
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_route.yaml \
--do getroute \
--json '{"rtm-family": 10, "rta-flowlabel": 1}' --output-json \
| jq '.["rta-table"]'
254
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_route.yaml \
--do getroute \
--json '{"rtm-family": 10, "rta-flowlabel": 10}' --output-json \
| jq '.["rta-table"]'
10
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the new flow label attributes to the spec. Example:
# ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \
--do newrule \
--json '{"family": 10, "flowlabel": 1, "flowlabel-mask": 1, "action": 1, "table": 1}'
None
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \
--dump getrule --json '{"family": 10}' --output-json \
| jq '.[] | select(.flowlabel == "0x1")'
{
"table": 1,
"suppress-prefixlen": "0xffffffff",
"protocol": 0,
"priority": 32765,
"flowlabel": "0x1",
"flowlabel-mask": "0x1",
"family": 10,
"dst-len": 0,
"src-len": 0,
"tos": 0,
"action": "to-tbl",
"flags": 0
}
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the missing phys-binding attr to the mctp-attrs in the rt_link spec.
This fixes commit 580db513b4a9 ("net: mctp: Expose transport binding
identifier via IFLA attribute").
Note that enum mctp_phys_binding is not currently uapi, but perhaps it
should be?
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241213112551.33557-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce support for ETHTOOL_MSG_TSCONFIG_GET/SET ethtool netlink socket
to read and configure hwtstamp configuration of a PHC provider. Note that
simultaneous hwtstamp isn't supported; configuring a new one disables the
previous setting.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Either the MAC or the PHY can provide hwtstamp, so we should be able to
read the tsinfo for any hwtstamp provider.
Enhance 'get' command to retrieve tsinfo of hwtstamp providers within a
network topology.
Add support for a specific dump command to retrieve all hwtstamp
providers within the network topology, with added functionality for
filtered dump to target a single interface.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add uint, sint to the list of attr types in the netlink-raw schema. This
fixes the rt_link spec which had a uint attr added in commit
f858cc9eed5b ("net: add IFLA_MAX_PACING_OFFLOAD_HORIZON device attribute")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241213110827.32250-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- __ETHTOOL_UDP_TUNNEL_TYPE_CNT and render max
- skip rendering stringset (empty enum)
- skip rendering c33-pse-ext-state (defined in ethtool.h)
- rename header flags to ethtool-flag-
- add attr-cnt-name to each attribute to use XXX_CNT instead of XXX_MAX
- add unspec 0 entry to each attribute
- carry some doc entries from the existing header
- tcp-header-split
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204155549.641348-5-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is similar to existing attr-cnt-name in the attributes
to allow changing the name of the 'count' enum entry.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241204155549.641348-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a per-NAPI IRQ suspension parameter, which can be get/set with
netdev-genl.
This patch doesn't change any behavior but prepares the code for other
changes in the following commits which use irq_suspend_timeout as a
timeout for IRQ suspension.
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Co-developed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://patch.msgid.link/20241109050245.191288-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix spelling of "probability" in tc.yaml documentation. This corrects
the max-P field description in struct tc_sfq_qopt_v1.
Signed-off-by: Abhinav Saxena <xandfury@gmail.com>
Link: https://patch.msgid.link/20241108195642.139315-1-xandfury@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a YNL spec for FIB rules:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_rule.yaml \
--dump getrule --json '{"family": 2}'
[{'action': 'to-tbl',
'dst-len': 0,
'family': 2,
'flags': 0,
'protocol': 2,
'src-len': 0,
'suppress-prefixlen': '0xffffffff',
'table': 255,
'tos': 0},
... ]
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241106090718.64713-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a YNL spec for neighbour tables and neighbour entries in rtnetlink.
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_neigh.yaml \
--dump getneigh
[{'cacheinfo': {'confirmed': 122664055,
'refcnt': 0,
'updated': 122658055,
'used': 122658055},
'dst': '0.0.0.0',
'family': 2,
'flags': set(),
'ifindex': 5,
'lladr': '',
'probes': 0,
'state': {'noarp'},
'type': 'broadcast'},
...]
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241106090718.64713-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc7).
Conflicts:
drivers/net/ethernet/freescale/enetc/enetc_pf.c
e15c5506dd39 ("net: enetc: allocate vf_state during PF probes")
3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module")
https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/am65-cpsw-nuss.c
de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7")
4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During the switch to YNL, the command to list all endpoints has been
accidentally restricted to users with admin permissions.
It looks like there are no reasons to have this restriction which makes
it harder for a user to quickly check if the endpoint list has been
correctly populated by an automated tool. Best to go back to the
previous behaviour then.
mptcp_pm_gen.c has been modified using ynl-gen-c.py:
$ ./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp_pm.yaml --source \
-o net/mptcp/mptcp_pm_gen.c
The header file doesn't need to be regenerated.
Fixes: 1d0507f46843 ("net: mptcp: convert netlink from small_ops to ops")
Cc: stable@vger.kernel.org
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-1-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to allow driver expose quality level of the clock it is
running, introduce a new netlink attr with enum to carry it to the
userspace. Also, introduce an op the dpll netlink code calls into the
driver to obtain the value.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20241030081157.966604-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ETHTOOL_MSG_PHY_NTF description is missing in the ethtool netlink spec.
Add it to the spec.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241022151418.875424-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are a couple of attributes missing from the 'bitset' attribute-set
in the ethtool netlink spec. Add them to the spec.
Reported-by: Kory Maincent <kory.maincent@bootlin.com>
Closes: https://lore.kernel.org/netdev/20241017180551.1259bf5c@kmaincent-XPS-13-7390/
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20241018090630.22212-1-donald.hunter@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-10-14
The following pull-request contains BPF updates for your *net-next* tree.
We've added 21 non-merge commits during the last 18 day(s) which contain
a total of 21 files changed, 1185 insertions(+), 127 deletions(-).
The main changes are:
1) Put xsk sockets on a struct diet and add various cleanups. Overall, this helps
to bump performance by 12% for some workloads, from Maciej Fijalkowski.
2) Extend BPF selftests to increase coverage of XDP features in combination
with BPF cpumap, from Alexis Lothoré (eBPF Foundation).
3) Extend netkit with an option to delegate skb->{mark,priority} scrubbing to
its BPF program, from Daniel Borkmann.
4) Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs,
from Mahe Tardy.
5) Extend BPF selftests covering a BPF program setting socket options per MPTCP
subflow, from Geliang Tang and Nicolas Rybowski.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (21 commits)
xsk: Use xsk_buff_pool directly for cq functions
xsk: Wrap duplicated code to function
xsk: Carry a copy of xdp_zc_max_segs within xsk_buff_pool
xsk: Get rid of xdp_buff_xsk::orig_addr
xsk: s/free_list_node/list_node/
xsk: Get rid of xdp_buff_xsk::xskb_list_node
selftests/bpf: check program redirect in xdp_cpumap_attach
selftests/bpf: make xdp_cpumap_attach keep redirect prog attached
selftests/bpf: fix bpf_map_redirect call for cpu map test
selftests/bpf: add tcx netns cookie tests
bpf: add get_netns_cookie helper to tc programs
selftests/bpf: add missing header include for htons
selftests/bpf: Extend netkit tests to validate skb meta data
tools: Sync if_link.h uapi tooling header
netkit: Add add netkit scrub support to rt_link.yaml
netkit: Simplify netkit mode over to use NLA_POLICY_MAX
netkit: Add option for scrubbing skb meta data
bpf: Remove unused macro
selftests/bpf: Add mptcp subflow subtest
selftests/bpf: Add getsockopt to inspect mptcp subflow
...
====================
Link: https://patch.msgid.link/20241014211110.16562-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support to set per-NAPI defer_hard_irqs and gro_flush_timeout.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-7-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support dumping gro_flush_timeout for a NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-5-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support dumping defer_hard_irqs for a NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow the user-space to fine-grain query the shaping features
supported by the NIC on each domain.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/3ddd10e450e3fe7d4b944c0d0b886d4483529ee6.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define the user-space visible interface to query, configure and delete
network shapers via yaml definition.
Add dummy implementations for the relevant NL callbacks.
set() and delete() operations touch a single shaper creating/updating or
deleting it.
The group() operation creates a shaper's group, nesting multiple input
shapers under the specified output shaper.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/7a33a1ff370bdbcd0cd3f909575c912cd56f41da.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add netkit scrub attribute support to the rt_link.yaml spec file.
Example:
# ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "nk0"}' --output-json | jq
[...]
"linkinfo": {
"kind": "netkit",
"data": {
"primary": 0,
"policy": "forward",
"mode": "l3",
"scrub": "default",
"peer-policy": "forward",
"peer-scrub": "default"
}
},
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20241004101335.117711-3-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Some network devices have the ability to offload EDT (Earliest
Departure Time) which is the model used for TCP pacing and FQ
packet scheduler.
Some of them implement the timing wheel mechanism described in
https://saeed.github.io/files/carousel-sigcomm17.pdf
with an associated 'timing wheel horizon'.
This patch adds dev->max_pacing_offload_horizon expressing
this timing wheel horizon in nsec units.
This is a read-only attribute.
Unless a driver sets it, dev->max_pacing_offload_horizon
is zero.
v2: addressed Jakub feedback ( https://lore.kernel.org/netdev/20240930152304.472767-2-edumazet@google.com/T/#mf6294d714c41cc459962154cc2580ce3c9693663 )
v3: added yaml doc (also per Jakub feedback)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241003121219.2396589-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add dmabuf information to page_pool stats:
$ ./cli.py --spec ../netlink/specs/netdev.yaml --dump page-pool-get
...
{'dmabuf': 10,
'id': 456,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 455,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 454,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 453,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 452,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 451,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 450,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
{'dmabuf': 10,
'id': 449,
'ifindex': 3,
'inflight': 1023,
'inflight-mem': 4190208},
And queue stats:
$ ./cli.py --spec ../netlink/specs/netdev.yaml --dump queue-get
...
{'dmabuf': 10, 'id': 8, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 9, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 10, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 11, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 12, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 13, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 14, 'ifindex': 3, 'type': 'rx'},
{'dmabuf': 10, 'id': 15, 'ifindex': 3, 'type': 'rx'},
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-14-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a netdev_dmabuf_binding struct which represents the
dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to
rx queues on the netdevice. On the binding, the dma_buf_attach
& dma_buf_map_attachment will occur. The entries in the sg_table from
mapping will be inserted into a genpool to make it ready
for allocation.
The chunks in the genpool are owned by a dmabuf_chunk_owner struct which
holds the dma-buf offset of the base of the chunk and the dma_addr of
the chunk. Both are needed to use allocations that come from this chunk.
We create a new type that represents an allocation from the genpool:
net_iov. We setup the net_iov allocation size in the
genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally
allocated by the page pool and given to the drivers.
The user can unbind the dmabuf from the netdevice by closing the netlink
socket that established the binding. We do this so that the binding is
automatically unbound even if the userspace process crashes.
The binding and unbinding leaves an indicator in struct netdev_rx_queue
that the given queue is bound, and the binding is actuated by resetting
the rx queue using the queue API.
The netdev_dmabuf_binding struct is refcounted, and releases its
resources only when all the refs are released.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
