| Age | Commit message (Expand) | Author | Files | Lines |
| 2025-10-24 | Bluetooth: fix corruption in h4_recv_buf() after cleanup | Calvin Owens | 1 | -1/+1 |
| 2025-07-23 | Bluetooth: hci_qca: Enable ISO data packet RX | Zijun Hu | 1 | -0/+1 |
| 2025-07-16 | Bluetooth: hci_dev: replace 'quirks' integer by 'quirk_flags' bitmap | Christian Eggers | 1 | -7/+7 |
| 2025-06-20 | driver: bluetooth: hci_qca:fix unable to load the BT driver | Shuai Zhang | 1 | -3/+10 |
| 2025-06-08 | treewide, timers: Rename from_timer() to timer_container_of()timers-cleanups-2025-06-08 | Ingo Molnar | 1 | -2/+2 |
| 2025-05-30 | Bluetooth: hci_qca: move the SoC type check to the right place | Bartosz Golaszewski | 1 | -7/+7 |
| 2025-04-05 | treewide: Switch/rename to timer_delete[_sync]() | Thomas Gleixner | 1 | -5/+5 |
| 2025-03-25 | Bluetooth: qca: add WCN3950 support | Dmitry Baryshkov | 1 | -0/+25 |
| 2025-03-25 | Bluetooth: hci_qca: use the power sequencer for wcn6750 | Janaki Ramaiah Thota | 1 | -1/+1 |
| 2025-01-15 | Bluetooth: Get rid of cmd_timeout and use the reset callback | Hsin-chen Chuang | 1 | -3/+3 |
| 2025-01-15 | Bluetooth: Use str_enable_disable-like helpers | Krzysztof Kozlowski | 1 | -2/+3 |
| 2025-01-15 | Bluetooth: qca: Expand firmware-name to load specific rampatch | Cheng Jiang | 1 | -5/+17 |
| 2024-11-14 | Bluetooth: hci_qca: use devm_clk_get_optional_enabled_with_rate() | Bartosz Golaszewski | 1 | -22/+2 |
| 2024-11-14 | bluetooth: Fix typos in the comments | Yan Zhen | 1 | -4/+4 |
| 2024-10-02 | move asm/unaligned.h to linux/unaligned.h | Al Viro | 1 | -1/+1 |
| 2024-08-30 | Bluetooth: qca: If memdump doesn't work, re-enable IBS | Douglas Anderson | 1 | -0/+1 |
| 2024-08-15 | Bluetooth: HCI: Invert LE State quirk to be opt-out rather then opt-in | Luiz Augusto von Dentz | 1 | -2/+2 |
| 2024-08-07 | Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown | Bartosz Golaszewski | 1 | -1/+1 |
| 2024-08-07 | Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms | Bartosz Golaszewski | 1 | -5/+8 |
| 2024-08-07 | Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390 | Bartosz Golaszewski | 1 | -4/+0 |
| 2024-07-15 | Bluetooth: hci_qca: Fix build error | Luiz Augusto von Dentz | 1 | -0/+1 |
| 2024-07-15 | Bluetooth: hci_qca: use the power sequencer for wcn7850 and wcn6855 | Bartosz Golaszewski | 1 | -2/+17 |
| 2024-07-15 | Bluetooth: hci_qca: make pwrseq calls the default if available | Bartosz Golaszewski | 1 | -11/+13 |
| 2024-07-15 | Bluetooth: hci_qca: unduplicate calls to hci_uart_register_device() | Bartosz Golaszewski | 1 | -17/+6 |
| 2024-07-15 | Bluetooth: hci_qca: schedule a devm action for disabling the clock | Bartosz Golaszewski | 1 | -8/+15 |
| 2024-07-15 | Bluetooth: qca: don't disable power management for QCA6390 | Bartosz Golaszewski | 1 | -1/+7 |
| 2024-07-15 | Bluetooth: qca: use the power sequencer for QCA6390 | Bartosz Golaszewski | 1 | -15/+59 |
| 2024-07-14 | Bluetooth: Use sizeof(*pointer) instead of sizeof(type) | Erick Archer | 1 | -3/+2 |
| 2024-06-28 | Bluetooth: qca: Fix BT enable failure again for QCA6390 after warm reboot | Zijun Hu | 1 | -3/+15 |
| 2024-04-24 | Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional() | Bartosz Golaszewski | 1 | -5/+13 |
| 2024-04-24 | Bluetooth: qca: fix NULL-deref on non-serdev setup | Johan Hovold | 1 | -2/+4 |
| 2024-04-24 | Bluetooth: qca: fix NULL-deref on non-serdev suspend | Johan Hovold | 1 | -0/+3 |
| 2024-04-24 | Bluetooth: qca: fix invalid device address check | Johan Hovold | 1 | -2/+0 |
| 2024-03-29 | Bluetooth: qca: fix device-address endianness | Johan Hovold | 1 | -0/+10 |
| 2024-03-29 | Revert "Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT" | Johan Hovold | 1 | -12/+1 |
| 2024-03-06 | Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional() | Bartosz Golaszewski | 1 | -3/+3 |
| 2024-02-28 | Bluetooth: qca: Fix triggering coredump implementation | Zijun Hu | 1 | -5/+4 |
| 2024-02-28 | Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT | Janaki Ramaiah Thota | 1 | -1/+12 |
| 2023-12-22 | Bluetooth: qca: Support HFP offload for QCA2066 | Zijun Hu | 1 | -0/+22 |
| 2023-12-22 | Bluetooth: qca: Set both WIDEBAND_SPEECH and LE_STATES quirks for QCA2066 | Zijun Hu | 1 | -0/+1 |
| 2023-10-23 | Bluetooth: qca: add support for QCA2066 | Tim Jiang | 1 | -0/+11 |
| 2023-08-24 | Bluetooth: qca: add support for WCN7850 | Neil Armstrong | 1 | -1/+30 |
| 2023-08-24 | Bluetooth: qca: use switch case for soc type behavior | Neil Armstrong | 1 | -54/+179 |
| 2023-08-11 | Bluetooth: btqca: Add WCN3988 support | Luca Weiss | 1 | -0/+12 |
| 2023-08-11 | bluetooth: Explicitly include correct DT includes | Rob Herring | 1 | -1/+1 |
| 2023-08-11 | Bluetooth: hci_qca: Add qcom devcoredump support | Sai Teja Aluvala | 1 | -50/+85 |
| 2023-08-11 | Bluetooth: hci_qca: Add qcom devcoredump sysfs support | Sai Teja Aluvala | 1 | -0/+15 |
| 2023-06-05 | Bluetooth: hci_qca: fix debugfs registration | Johan Hovold | 1 | -1/+5 |
| 2023-04-23 | Bluetooth: hci_qca: mark OF related data as maybe unused | Steev Klimaszewski | 1 | -1/+1 |
| 2023-04-23 | Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855 | Steev Klimaszewski | 1 | -14/+43 |
| 2023-04-23 | Bluetooth: hci_qca: mark OF related data as maybe unused | Krzysztof Kozlowski | 1 | -5/+5 |
| 2023-02-09 | Bluetooth: hci_qca: get wakeup status from serdev device handle | Zhengping Jiang | 1 | -3/+4 |
| 2023-02-09 | Bluetooth: qca: Fix sparse warnings | Luiz Augusto von Dentz | 1 | -2/+2 |
| 2023-01-17 | Bluetooth: hci_qca: Fix driver shutdown on closed serdev | Krzysztof Kozlowski | 1 | -0/+7 |
| 2022-12-13 | Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/net... | Linus Torvalds | 1 | -2/+3 |
| 2022-12-12 | Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave() | Yang Yingliang | 1 | -1/+1 |
| 2022-12-12 | Bluetooth: hci_qca: only assign wakeup with serial port support | Zhengping Jiang | 1 | -1/+2 |
| 2022-11-24 | Bluetooth: hci_qca: Fix the teardown problem for real | Thomas Gleixner | 1 | -2/+8 |
| 2022-07-21 | Bluetooth: hci_qca: Return wakeup for qca_wakeup | Sai Teja Aluvala | 1 | -1/+1 |
| 2022-05-13 | Bluetooth: hci_qca: Use del_timer_sync() before freeing | Steven Rostedt | 1 | -2/+2 |
| 2022-01-06 | Bluetooth: hci_qca: Fix NULL vs IS_ERR_OR_NULL check in qca_serdev_probe | Miaoqian Lin | 1 | -3/+3 |
| 2021-12-22 | Bluetooth: hci_qca: Stop IBS timer during BT OFF | Panicker Harish | 1 | -0/+3 |
| 2021-10-01 | Bluetooth: Rename driver .prevent_wake to .wakeup | Luiz Augusto von Dentz | 1 | -2/+2 |
| 2021-09-28 | Bluetooth: hci_qca: enable Qualcomm WCN399x for AOSP extension | Joseph Hwang | 1 | -0/+1 |
| 2021-06-26 | Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6750 | Venkata Lakshmi Narayana Gubba | 1 | -21/+93 |
| 2021-06-26 | Bluetooth: hci_qca: fix potential GPF | Pavel Skripkin | 1 | -2/+2 |
| 2021-03-22 | Bluetooth: hci_qca: Mundane typo fix | Bhaskar Chowdhury | 1 | -1/+1 |
| 2021-03-11 | Bluetooth: hci_qca: Add device_may_wakeup support | Venkata Lakshmi Narayana Gubba | 1 | -0/+15 |
| 2021-02-08 | Bluetooth: hci_qca: Fixed issue during suspend | Venkata Lakshmi Narayana Gubba | 1 | -1/+11 |
| 2021-02-02 | Bluetooth: hci_qca: check for SSR triggered flag while suspend | Venkata Lakshmi Narayana Gubba | 1 | -1/+2 |
| 2021-01-06 | Bluetooth: hci_qca: Wait for SSR completion during suspend | Venkata Lakshmi Narayana Gubba | 1 | -7/+9 |
| 2021-01-06 | Bluetooth: hci_qca: Fix memleak in qca_controller_memdump | Dinghao Liu | 1 | -0/+2 |
| 2020-12-07 | Bluetooth: btqca: Use NVM files based on SoC ID for WCN3991 | Venkata Lakshmi Narayana Gubba | 1 | -5/+4 |
| 2020-11-11 | Bluetooth: hci_qca: Wait for timeout during suspend | Venkata Lakshmi Narayana Gubba | 1 | -9/+39 |
| 2020-11-11 | Bluetooth: hci_qca: resolve various warnings | Nigel Christian | 1 | -4/+4 |
| 2020-11-11 | Bluetooth: hci_qca: Enhance retry logic in qca_setup | Balakrishna Godavarthi | 1 | -16/+18 |
| 2020-11-09 | Bluetooth: btqca: Add valid le states quirk | Abhishek Pandit-Subedi | 1 | -6/+13 |
| 2020-09-11 | Bluetooth: hci_qca: Remove duplicate power off in proto close | Venkata Lakshmi Narayana Gubba | 1 | -3/+2 |
| 2020-09-11 | Bluetooth: hci_qca: remove redundant null check | Xu Wang | 1 | -2/+1 |
| 2020-07-28 | Bluetooth: hci_qca: Stop collecting memdump again for command timeout during SSR | Venkata Lakshmi Narayana Gubba | 1 | -4/+5 |
| 2020-07-13 | Bluetooth: hci_qca: Bug fixes for SSR | Venkata Lakshmi Narayana Gubba | 1 | -4/+36 |
| 2020-07-10 | Bluetooth: Use fallthrough pseudo-keyword | Gustavo A. R. Silva | 1 | -7/+1 |
| 2020-06-12 | Bluetooth: hci_qca: Request Tx clock vote off only when Tx is pending | Balakrishna Godavarthi | 1 | -1/+1 |
| 2020-06-12 | Bluetooth: hci_qca: Increase SoC idle timeout to 200ms | Balakrishna Godavarthi | 1 | -1/+1 |
| 2020-06-10 | Bluetooth: hci_qca: Bug fix during SSR timeout | Venkata Lakshmi Narayana Gubba | 1 | -12/+17 |
| 2020-06-08 | Bluetooth: hci_qca: Refactor error handling in qca_suspend() | Matthias Kaehlcke | 1 | -7/+5 |
| 2020-06-08 | Bluetooth: hci_qca: Skip serdev wait when no transfer is pending | Matthias Kaehlcke | 1 | -2/+6 |
| 2020-06-08 | Bluetooth: hci_qca: Only remove TX clock vote after TX is completed | Matthias Kaehlcke | 1 | -3/+3 |
| 2020-06-08 | Bluetooth: hci_qca: Simplify determination of serial clock on/off state from ... | Matthias Kaehlcke | 1 | -4/+2 |
| 2020-06-03 | Bluetooth: hci_qca: Fix an error pointer dereference | Dan Carpenter | 1 | -9/+9 |
| 2020-06-01 | Bluetooth: hci_qca: Fix QCA6390 memdump failure | Zijun Hu | 1 | -9/+45 |
| 2020-05-29 | Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot | Zijun Hu | 1 | -0/+33 |
| 2020-05-29 | Bluetooth: hci_qca: Fix suspend/resume functionality failure | Zijun Hu | 1 | -4/+6 |
| 2020-05-20 | Bluetooth: hci_qca: Fix uninitialized access to hdev | Abhishek Pandit-Subedi | 1 | -1/+2 |
| 2020-05-18 | Bluetooth: hci_qca: Enable WBS support for wcn3991 | Abhishek Pandit-Subedi | 1 | -6/+17 |
| 2020-04-28 | Bluetooth: hci_qca: allow max-speed to be set for QCA9377 devices | Christian Hewitt | 1 | -7/+9 |
| 2020-04-28 | Bluetooth: hci_qca: add compatible for QCA9377 | Christian Hewitt | 1 | -0/+1 |
| 2020-04-02 | Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC QCA6390 | Rocky Liao | 1 | -7/+33 |
| 2020-03-04 | Bluetooth: hci_qca: Replace devm_gpiod_get() with devm_gpiod_get_optional() | Rocky Liao | 1 | -8/+8 |
| 2020-03-04 | Bluetooth: hci_qca: Make bt_en and susclk not mandatory for QCA Rome | Rocky Liao | 1 | -21/+26 |
| 2020-02-28 | Bluetooth: hci_qca: Not send vendor pre-shutdown command for QCA Rome | Rocky Liao | 1 | -1/+3 |
| 2020-02-18 | Bluetooth: hci_qca: Bug fixes while collecting controller memory dump | Venkata Lakshmi Narayana Gubba | 1 | -34/+67 |
| 2020-02-05 | Bluetooth: hci_qca: Optimized code while enabling clocks for BT SOC | Venkata Lakshmi Narayana Gubba | 1 | -7/+3 |
| 2020-02-03 | Bluetooth: hci_qca: Enable clocks required for BT SOC | Venkata Lakshmi Narayana Gubba | 1 | -0/+16 |
| 2020-01-16 | Bluetooth: hci_qca: Enable power off/on support during hci down/up for QCA Rome | Rocky Liao | 1 | -9/+11 |
| 2020-01-15 | Bluetooth: hci_qca: Retry btsoc initialize when it fails | Rocky Liao | 1 | -0/+19 |
| 2020-01-15 | Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_shutdown() | Rocky Liao | 1 | -12/+16 |
| 2020-01-14 | Bluetooth: hci_qca: Add qca_power_on() API to support both wcn399x and Rome p... | Rocky Liao | 1 | -21/+33 |
| 2020-01-08 | Bluetooth: hci_qca: Remove set but not used variable 'opcode' | YueHaibing | 1 | -2/+1 |
| 2020-01-08 | Bluetooth: hci_qca: Use vfree() instead of kfree() | Wei Yongjun | 1 | -2/+2 |
| 2020-01-04 | Bluetooth: hci_qca: Collect controller memory dump during SSR | Balakrishna Godavarthi | 1 | -5/+291 |
| 2020-01-04 | Bluetooth: hci_qca: Replace of_device_get_match_data with device_get_match_data | Rocky Liao | 1 | -1/+1 |
| 2019-11-09 | Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC WCN3991 | Balakrishna Godavarthi | 1 | -2/+14 |
| 2019-11-04 | Bluetooth: hci_qca: add PM support | Claire Chang | 1 | -3/+124 |
| 2019-10-21 | Revert "Bluetooth: hci_qca: Add delay for wcn3990 stability" | Jeffrey Hugo | 1 | -3/+1 |
| 2019-10-17 | Bluetooth: hci_qca: Split qca_power_setup() | Bjorn Andersson | 1 | -25/+36 |
| 2019-10-17 | Bluetooth: hci_qca: Use regulator bulk enable/disable | Bjorn Andersson | 1 | -42/+13 |
| 2019-10-17 | Bluetooth: hci_qca: Don't vote for specific voltage | Bjorn Andersson | 1 | -18/+8 |
| 2019-10-17 | Bluetooth: hci_qca: Update regulator_set_load() usage | Bjorn Andersson | 1 | -15/+18 |
| 2019-10-17 | Bluetooth: hci_qca: Add delay for wcn3990 stability | Jeffrey Hugo | 1 | -1/+3 |
| 2019-09-15 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | David S. Miller | 1 | -4/+6 |
| 2019-09-05 | Bluetooth: hci_qca: wait for Pre shutdown complete event before sending the P... | Harish Bandi | 1 | -0/+2 |
| 2019-09-05 | Bluetooth: hci_qca: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for QCA UART Radio | Rocky Liao | 1 | -0/+5 |
| 2019-09-05 | Bluetooth: hci_qca: Make structure qca_proto constant | Nishka Dasgupta | 1 | -1/+1 |
| 2019-09-05 | Bluetooth: hci_qca: Remove redundant initializations to zero | Matthias Kaehlcke | 1 | -19/+0 |
| 2019-09-04 | Bluetooth: hci_qca: disable irqs when spinlock is acquired | Harish Bandi | 1 | -4/+6 |
| 2019-08-14 | Bluetooth: hci_qca: Skip 1 error print in device_want_to_sleep() | Rocky Liao | 1 | -2/+2 |
| 2019-08-12 | Bluetooth: hci_qca: Send VS pre shutdown command. | Harish Bandi | 1 | -0/+3 |
| 2019-08-12 | Bluetooth: hci_qca: Use kfree_skb() instead of kfree() | Wei Yongjun | 1 | -1/+1 |
| 2019-07-31 | Bluetooth: hci_uart: check for missing tty operations | Vladis Dronov | 1 | -0/+3 |
| 2019-07-06 | Bluetooth: hci_qca: Load customized NVM based on the device property | Rocky Liao | 1 | -1/+17 |
| 2019-07-06 | Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor event | Matthias Kaehlcke | 1 | -1/+54 |
| 2019-06-05 | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333 | Thomas Gleixner | 1 | -14/+1 |
| 2019-05-05 | Bluetooth: hci_qca: Rename STATE_<flags> to QCA_<flags> | Matthias Kaehlcke | 1 | -7/+8 |
| 2019-05-03 | Bluetooth: hci_qca: Added support for WCN3998 | Harish Bandi | 1 | -14/+26 |
| 2019-04-23 | Bluetooth: hci_qca: Fix crash with non-serdev devices | Matthias Kaehlcke | 1 | -1/+2 |
| 2019-04-23 | Bluetooth: hci_qca: Give enough time to ROME controller to bootup. | Balakrishna Godavarthi | 1 | -0/+2 |
| 2019-04-23 | Bluetooth: hci_qca: Add helper function to get the chip family | Matthias Kaehlcke | 1 | -19/+26 |
| 2019-03-02 | Bluetooth: hci_qca: Reduce delay after sending baudrate request for WCN3990 | Matthias Kaehlcke | 1 | -8/+18 |
| 2019-02-27 | Bluetooth: hci_qca: Use msleep() instead of open coding it | Matthias Kaehlcke | 1 | -3/+1 |
| 2019-02-27 | Bluetooth: hci_qca: Add delay after power-off pulse | Matthias Kaehlcke | 1 | -3/+3 |
| 2019-02-27 | Bluetooth: hci_qca: Move boot delay to qca_send_power_pulse() | Matthias Kaehlcke | 1 | -3/+3 |
| 2019-02-27 | Bluetooth: hci_qca: Pass boolean 'on/off' to qca_send_power_pulse() | Matthias Kaehlcke | 1 | -4/+5 |
| 2019-02-26 | Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990 | Matthias Kaehlcke | 1 | -0/+1 |
| 2019-02-18 | Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer | Balakrishna Godavarthi | 1 | -2/+15 |
| 2019-02-18 | Bluetooth: hci_qca: Deassert RTS while baudrate change command | Balakrishna Godavarthi | 1 | -14/+15 |
| 2019-02-18 | Bluetooth: hci_qca: use wait_until_sent() for power pulses | Balakrishna Godavarthi | 1 | -23/+15 |
| 2019-01-22 | Bluetooth: hci_qca: Add helper to set device address | Balakrishna Godavarthi | 1 | -1/+4 |
| 2018-10-18 | Bluetooth: hci_qca: Add support for controller debug logs. | Balakrishna Godavarthi | 1 | -1/+18 |
| 2018-10-12 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net | David S. Miller | 1 | -1/+1 |
| 2018-10-05 | treewide: Replace more open-coded allocation size multiplications | Kees Cook | 1 | -1/+1 |
| 2018-09-27 | Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990 | Balakrishna Godavarthi | 1 | -0/+33 |
| 2018-09-27 | Bluetooth: hci_qca: Remove hdev dereference in qca_close(). | Balakrishna Godavarthi | 1 | -6/+9 |
| 2018-09-27 | Bluetooth: hci_qca: Remove serdev_device_open/close function calls | Balakrishna Godavarthi | 1 | -2/+0 |
| 2018-08-03 | Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990 | Balakrishna Godavarthi | 1 | -47/+360 |
| 2018-08-03 | Bluetooth: hci_qca: Enable 3.2 Mbps operating speed. | Balakrishna Godavarthi | 1 | -1/+3 |
| 2018-08-03 | Bluetooth: hci_qca: Add wrapper functions for setting UART speed | Balakrishna Godavarthi | 1 | -23/+70 |
| 2018-08-03 | Bluetooth: btqca: Redefine qca_uart_setup() to generic function. | Balakrishna Godavarthi | 1 | -1/+9 |
| 2018-08-03 | Bluetooth: btqca: Rename ROME specific functions to generic functions | Balakrishna Godavarthi | 1 | -1/+1 |
| 2018-07-23 | bluetooth: hci_qca: Replace GFP_ATOMIC with GFP_KERNEL | Jia-Ju Bai | 1 | -2/+2 |
| 2018-05-30 | Bluetooth: hci_qca: Fix "Sleep inside atomic section" warning | Thierry Escande | 1 | -1/+1 |
| 2018-05-18 | Bluetooth: hci_qca: Add serdev support | Thierry Escande | 1 | -2/+108 |
| 2018-05-18 | Bluetooth: hci_qca: Avoid missing rampatch failure with userspace fw loader | Amit Pundir | 1 | -0/+6 |
| 2017-12-13 | Bluetooth: hci_qca: Avoid setup failure on missing rampatch | Loic Poulain | 1 | -0/+3 |
| 2017-10-30 | Bluetooth: Use bt_dev_err and bt_dev_info when possible | Marcel Holtmann | 1 | -6/+6 |
| 2017-10-06 | Bluetooth: Convert timers to use timer_setup() | Kees Cook | 1 | -9/+8 |
| 2017-06-16 | networking: add and use skb_put_u8() | Johannes Berg | 1 | -1/+1 |
| 2017-06-16 | networking: make skb_put & friends return void pointers | Johannes Berg | 1 | -1/+1 |
| 2017-06-16 | networking: introduce and use skb_put_data() | Johannes Berg | 1 | -1/+1 |
| 2017-02-18 | Bluetooth: hci_qca: fix spelling mistake: "Spurrious" -> "Spurious" | Colin Ian King | 1 | -2/+2 |
| 2016-11-27 | Bluetooth: hci_qca: Use setup_timer Kernel API instead of init_timer | Prasanna Karthik | 1 | -6/+3 |
| 2016-09-19 | Bluetooth: Remove deprecated create_singlethread_workqueue | Bhaktipriya Shridhar | 1 | -1/+1 |
| 2015-11-19 | Bluetooth: Use new hci_skb_pkt_* wrappers for drivers | Marcel Holtmann | 1 | -2/+2 |
| 2015-11-04 | Merge tag 'driver-core-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/... | Linus Torvalds | 1 | -2/+2 |
| 2015-10-21 | Bluetooth: hci_uart: Provide initial manufacturer information | Marcel Holtmann | 1 | -0/+1 |
| 2015-10-04 | debugfs: Pass bool pointer to debugfs_create_bool() | Viresh Kumar | 1 | -2/+2 |
| 2015-09-28 | Bluetooth: hci_qca: Changed unsigned long to bool | Prasanna Karthik | 1 | -2/+2 |
| 2015-09-17 | Bluetooth: hci_qca: Coding style clean up | Prasanna Karthik | 1 | -3/+3 |
| 2015-09-17 | Bluetooth: hci_qca: Fix a few tab vs spaces issues | Marcel Holtmann | 1 | -3/+3 |
| 2015-08-14 | Bluetooth: hciuart: Fix to use boolean flag with u32 type | Ben YoungTae Kim | 1 | -4/+4 |
| 2015-08-10 | Bluetooth: hciuart: Add support QCA chipset for UART | Ben Young Tae Kim | 1 | -0/+969 |