| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, target, qla2xxx) plus assorted
cleanups and fixes including the WQ_PERCPU series.
The biggest core change is the new allocation of pseudo-devices which
allow the sending of internal commands to a given SCSI target"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (147 commits)
scsi: MAINTAINERS: Add the UFS include directory
scsi: scsi_debug: Support injecting unaligned write errors
scsi: qla2xxx: Fix improper freeing of purex item
scsi: ufs: rockchip: Fix compile error without CONFIG_GPIOLIB
scsi: ufs: rockchip: Reset controller on PRE_CHANGE of hce enable notify
scsi: ufs: core: Use scsi_device_busy()
scsi: ufs: core: Fix single doorbell mode support
scsi: pm80xx: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedi: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: ibmvscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedf: Add WQ_PERCPU to alloc_workqueue() users
scsi: bnx2fc: Add WQ_PERCPU to alloc_workqueue() users
scsi: be2iscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: message: fusion: Add WQ_PERCPU to alloc_workqueue() users
scsi: lpfc: WQ_PERCPU added to alloc_workqueue() users
scsi: scsi_transport_fc: WQ_PERCPU added to alloc_workqueue users()
scsi: scsi_dh_alua: WQ_PERCPU added to alloc_workqueue() users
scsi: qla2xxx: WQ_PERCPU added to alloc_workqueue() users
scsi: target: sbp: Replace use of system_unbound_wq with system_dfl_wq
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull persistent dentry infrastructure and conversion from Al Viro:
"Some filesystems use a kinda-sorta controlled dentry refcount leak to
pin dentries of created objects in dcache (and undo it when removing
those). A reference is grabbed and not released, but it's not actually
_stored_ anywhere.
That works, but it's hard to follow and verify; among other things, we
have no way to tell _which_ of the increments is intended to be an
unpaired one. Worse, on removal we need to decide whether the
reference had already been dropped, which can be non-trivial if that
removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag
(DCACHE_PERSISTENT) marking those "leaked" dentries. Having it set
claims responsibility for +1 in refcount.
The end result this series is aiming for:
- get these unbalanced dget() and dput() replaced with new primitives
that would, in addition to adjusting refcount, set and clear
persistency flag.
- instead of having kill_litter_super() mess with removing the
remaining "leaked" references (e.g. for all tmpfs files that hadn't
been removed prior to umount), have the regular
shrink_dcache_for_umount() strip DCACHE_PERSISTENT of all dentries,
dropping the corresponding reference if it had been set. After that
kill_litter_super() becomes an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many
places in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary
pieces have already gone into mainline. This chunk is finally getting
to the meat of that stuff - infrastructure and most of the conversions
to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here"
* tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
d_make_discardable(): warn if given a non-persistent dentry
kill securityfs_recursive_remove()
convert securityfs
get rid of kill_litter_super()
convert rust_binderfs
convert nfsctl
convert rpc_pipefs
convert hypfs
hypfs: swich hypfs_create_u64() to returning int
hypfs: switch hypfs_create_str() to returning int
hypfs: don't pin dentries twice
convert gadgetfs
gadgetfs: switch to simple_remove_by_name()
convert functionfs
functionfs: switch to simple_remove_by_name()
functionfs: fix the open/removal races
functionfs: need to cancel ->reset_work in ->kill_sb()
functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}()
functionfs: don't abuse ffs_data_closed() on fs shutdown
convert selinuxfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fd prepare updates from Christian Brauner:
"This adds the FD_ADD() and FD_PREPARE() primitive. They simplify the
common pattern of get_unused_fd_flags() + create file + fd_install()
that is used extensively throughout the kernel and currently requires
cumbersome cleanup paths.
FD_ADD() - For simple cases where a file is installed immediately:
fd = FD_ADD(O_CLOEXEC, vfio_device_open_file(device));
if (fd < 0)
vfio_device_put_registration(device);
return fd;
FD_PREPARE() - For cases requiring access to the fd or file, or
additional work before publishing:
FD_PREPARE(fdf, O_CLOEXEC, sync_file->file);
if (fdf.err) {
fput(sync_file->file);
return fdf.err;
}
data.fence = fd_prepare_fd(fdf);
if (copy_to_user((void __user *)arg, &data, sizeof(data)))
return -EFAULT;
return fd_publish(fdf);
The primitives are centered around struct fd_prepare. FD_PREPARE()
encapsulates all allocation and cleanup logic and must be followed by
a call to fd_publish() which associates the fd with the file and
installs it into the caller's fdtable. If fd_publish() isn't called,
both are deallocated automatically. FD_ADD() is a shorthand that does
fd_publish() immediately and never exposes the struct to the caller.
I've implemented this in a way that it's compatible with the cleanup
infrastructure while also being usable separately. IOW, it's centered
around struct fd_prepare which is aliased to class_fd_prepare_t and so
we can make use of all the basica guard infrastructure"
* tag 'vfs-6.19-rc1.fd_prepare.fs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits)
io_uring: convert io_create_mock_file() to FD_PREPARE()
file: convert replace_fd() to FD_PREPARE()
vfio: convert vfio_group_ioctl_get_device_fd() to FD_ADD()
tty: convert ptm_open_peer() to FD_ADD()
ntsync: convert ntsync_obj_get_fd() to FD_PREPARE()
media: convert media_request_alloc() to FD_PREPARE()
hv: convert mshv_ioctl_create_partition() to FD_ADD()
gpio: convert linehandle_create() to FD_PREPARE()
pseries: port papr_rtas_setup_file_interface() to FD_ADD()
pseries: convert papr_platform_dump_create_handle() to FD_ADD()
spufs: convert spufs_gang_open() to FD_PREPARE()
papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()
spufs: convert spufs_context_open() to FD_PREPARE()
net/socket: convert __sys_accept4_file() to FD_ADD()
net/socket: convert sock_map_fd() to FD_ADD()
net/kcm: convert kcm_ioctl() to FD_PREPARE()
net/handshake: convert handshake_nl_accept_doit() to FD_PREPARE()
secretmem: convert memfd_secret() to FD_ADD()
memfd: convert memfd_create() to FD_ADD()
bpf: convert bpf_token_create() to FD_PREPARE()
...
|
|
Link: https://patch.msgid.link/20251123-work-fd-prepare-v4-41-b6efa1706cfd@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When DT is used to get the reference of 'rp1_node', it should be released
when not needed anymore, otherwise it is leaking.
In such a case, add the missing of_node_put() call at the end of the probe,
as already done in the error handling path.
Fixes: 49d63971f963 ("misc: rp1: RaspberryPi RP1 misc driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://patch.msgid.link/9bc1206de787fa86384f3e5ba0a8027947bc00ff.1762585959.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pm_runtime_get_sync() may increment the runtime PM usage count even if the
resume fails, which requires an explicit pm_runtime_put_noidle() to balance
it. This driver ignored the return value, risking a usage-count leak on
resume failure.
Replace it with pm_runtime_resume_and_get(), which returns 0 on success and
a negative errno on failure, and only increments the usage count on success.
This simplifies the error path and avoids possible leaks. Also check for
errors explicitly with `if (ret < 0)`.
Signed-off-by: Vivek BalachandharTN <vivek.balachandhar@gmail.com>
Link: https://patch.msgid.link/20251030120022.239951-1-vivek.balachandhar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The pcim_iomap_region() function never returns NULL, it returns error
pointers. Update the checking to match.
Fixes: b91c13534a63 ("misc: cb710: Replace deprecated PCI functions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/aQITFDPyuzjNN4GN@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mei_register() fails to release the device reference in error paths
after device_initialize(). During normal device registration, the
reference is properly handled through mei_deregister() which calls
device_destroy(). However, in error handling paths (such as cdev_alloc
failure, cdev_add failure, etc.), missing put_device() calls cause
reference count leaks, preventing the device's release function
(mei_device_release) from being called and resulting in memory leaks
of mei_device.
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 7704e6be4ed2 ("mei: hook mei_device on class device")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251104020133.5017-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
INTEL_MEI_GSC depends on either i915 or Xe
and can be present when either of above is present.
Cc: stable <stable@kernel.org>
Fixes: 87a4c85d3a3e ("drm/xe/gsc: add gsc device support")
Tested-by: Baoli Zhang <baoli.zhang@intel.com>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251109153533.3179787-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251027114118.390775-1-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
it is always equal (and always had been equal) to &simple_dir_operations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
static contents for each "service processor", whatever the fuck it is.
Congruent subdirectories of root, created at mount time, taken out
by kill_litter_super(). All dentries created with d_alloc_name() and are
left pinned. The odd part is that the list of service providers is
assumed to be unchanging - no locking, nothing to handle removals or
extra elements added later on.
... and it's a PCI device. If you ever tell it to remove an instance,
you are fucked - it doesn't bother with removing its directory from filesystem,
it has a strange check that presumably wanted to be a check for removed
devices, but it had never been fleshed out.
Anyway, d_add() -> d_make_persistent()+dput() in ibmasmfs_create_dir() and
ibmasmfs_create_file(), and make the latter return int - no need to even
borrow that dentry, callers completely ignore it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add OP-TEE based RPMB support for UFS devices. This enables secure RPMB
operations on UFS devices through OP-TEE, providing the same
functionality available for eMMC devices and extending kernel-based
secure storage support to UFS-based systems.
Benefits of OP-TEE based RPMB implementation:
- Eliminates dependency on userspace supplicant for RPMB access
- Enables early boot secure storage access (e.g., fTPM, secure UEFI
variables)
- Provides kernel-level RPMB access as soon as UFS driver is
initialized
- Removes complex initramfs dependencies and boot ordering requirements
- Ensures reliable and deterministic secure storage operations
- Supports both built-in and modular fTPM configurations
[mkp: make this build as a module]
Co-developed-by: Can Guo <can.guo@oss.qualcomm.com>
Signed-off-by: Can Guo <can.guo@oss.qualcomm.com>
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://patch.msgid.link/20251107230518.4060231-4-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Dismantle class device last in probe error flow to avoid accessing
freed memory like:
[ 87.926774] WARNING: CPU: 9 PID: 518 at kernel/workqueue.c:4234
__flush_work+0x340/0x390
...
[ 87.926912] Workqueue: async async_run_entry_fn
[ 87.926918] RIP: e030:__flush_work+0x340/0x390
[ 87.926923] Code: 26 9d 05 00 65 48 8b 15 26 3c ca 02 48 85 db 48 8b
04 24 48 89 54 24 58 0f 85 de fe ff ff e9 f6 fd ff ff 0f 0b e9 77 ff ff
ff <0f> 0b e9 70 ff ff ff 0f 0b e9 19 ff ff ff e8 7d 8b 0e 01 48 89 de
[ 87.926931] RSP: e02b:ffffc900412ebc00 EFLAGS: 00010246
[ 87.926936] RAX: 0000000000000000 RBX: ffff888103e55090 RCX: 0000000000000000
[ 87.926941] RDX: 000fffffffe00000 RSI: 0000000000000001 RDI: ffffc900412ebc60
[ 87.926945] RBP: ffff888103e55090 R08: ffffffffc1266ec8 R09: ffff8881109076e8
[ 87.926949] R10: 0000000080040003 R11: 0000000000000000 R12: ffff888103e54000
[ 87.926953] R13: ffffc900412ebc18 R14: 0000000000000001 R15: 0000000000000000
[ 87.926962] FS: 0000000000000000(0000) GS:ffff888233238000(0000) knlGS:0000000000000000
[ 87.926967] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 87.926971] CR2: 00007e7923b32708 CR3: 00000001088df000 CR4: 0000000000050660
[ 87.926977] Call Trace:
[ 87.926981] <TASK>
[ 87.926987] ? __call_rcu_common.constprop.0+0x11e/0x310
[ 87.926993] cancel_work_sync+0x5e/0x80
[ 87.926999] mei_cancel_work+0x19/0x40 [mei]
[ 87.927051] mei_me_probe+0x273/0x2b0 [mei_me]
[ 87.927060] local_pci_probe+0x45/0x90
[ 87.927066] pci_call_probe+0x5b/0x180
[ 87.927070] pci_device_probe+0x95/0x140
[ 87.927074] ? driver_sysfs_add+0x57/0xc0
[ 87.927079] really_probe+0xde/0x340
[ 87.927083] ? pm_runtime_barrier+0x54/0x90
[ 87.927087] __driver_probe_device+0x78/0x110
[ 87.927092] driver_probe_device+0x1f/0xa0
[ 87.927095] __driver_attach_async_helper+0x5e/0xe0
[ 87.927100] async_run_entry_fn+0x34/0x130
[ 87.927104] process_one_work+0x18d/0x340
[ 87.927108] worker_thread+0x256/0x3a0
[ 87.927111] ? __pfx_worker_thread+0x10/0x10
[ 87.927115] kthread+0xfc/0x240
[ 87.927120] ? __pfx_kthread+0x10/0x10
[ 87.927124] ? __pfx_kthread+0x10/0x10
[ 87.927127] ret_from_fork+0xf5/0x110
[ 87.927132] ? __pfx_kthread+0x10/0x10
[ 87.927136] ret_from_fork_asm+0x1a/0x30
[ 87.927141] </TASK>
Tested-by: Guenter Roeck <groeck@google.com>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Closes: https://lore.kernel.org/lkml/aQbYAXPADqfiXUYO@mail-itl/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/8deef7c4-ac75-4db8-91b7-02cf0e39e371@roeck-us.net/
Fixes: 7704e6be4ed2 ("mei: hook mei_device on class device")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Link: https://patch.msgid.link/20251102180836.1203314-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the fixes in here, and it resolves a merge conflict in:
drivers/misc/amd-sbi/Kconfig
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: usb: hdm_probe: Fix calling put_device() before device initialization
most: usb: Fix use-after-free in hdm_disconnect
binder: remove "invalid inc weak" check
mei: txe: fix initialization order
comedi: fix divide-by-zero in comedi_buf_munge()
mei: late_bind: Fix -Wincompatible-function-pointer-types-strict
misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup
mei: me: add wildcat lake P DID
misc: amd-sbi: Clarify that this is a BMC driver
nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE
binder: Fix missing kernel-doc entries in binder.c
rust_binder: report freeze notification only when fully frozen
rust_binder: don't delete FreezeListener if there are pending duplicates
rust_binder: freeze_notif_done should resend if wrong state
rust_binder: remove warning about orphan mappings
rust_binder: clean `clippy::mem_replace_with_default` warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"17 hotfixes. 12 are cc:stable and 14 are for MM.
There's a two-patch DAMON series from SeongJae Park which addresses a
missed check and possible memory leak. Apart from that it's all
singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-10-22-12-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
csky: abiv2: adapt to new folio flags field
mm/damon/core: use damos_commit_quota_goal() for new goal commit
mm/damon/core: fix potential memory leak by cleaning ops_filter in damon_destroy_scheme
hugetlbfs: move lock assertions after early returns in huge_pmd_unshare()
vmw_balloon: indicate success when effectively deflating during migration
mm/damon/core: fix list_add_tail() call on damon_call()
mm/mremap: correctly account old mapping after MREMAP_DONTUNMAP remap
mm: prevent poison consumption when splitting THP
ocfs2: clear extent cache after moving/defragmenting extents
mm: don't spin in add_stack_record when gfp flags don't allow
dma-debug: don't report false positives with DMA_BOUNCE_UNALIGNED_KMALLOC
mm/damon/sysfs: dealloc commit test ctx always
mm/damon/sysfs: catch commit test ctx alloc failure
hung_task: fix warnings caused by unaligned lock pointers
|
|
The mei_register() should move before the mei_start() for hook
on class device to work.
Same change was implemented in mei-me, missed from mei-txe.
Fixes: 7704e6be4ed2 ("mei: hook mei_device on class device")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251019073659.2646791-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When building with -Wincompatible-function-pointer-types-strict, a
warning designed to catch kernel control flow integrity (kCFI) issues at
build time, there is an instance in the new mei late binding code
originating from the type parameter of mei_lb_push_payload():
drivers/misc/mei/mei_lb.c:211:18: error: incompatible function pointer types initializing 'int (*)(struct device *, u32, u32, const void *, size_t)' (aka 'int (*)(struct device *, unsigned int, unsigned int, const void *, unsigned long)') with an expression of type 'int (struct device *, enum intel_lb_type, u32, const void *, size_t)' (aka 'int (struct device *, enum intel_lb_type, unsigned int, const void *, unsigned long)') [-Werror,-Wincompatible-function-pointer-types-strict]
211 | .push_payload = mei_lb_push_payload,
| ^~~~~~~~~~~~~~~~~~~
While 'unsigned int' and 'enum intel_lb_type' are ABI compatible, hence
no regular warning from -Wincompatible-function-pointer-types, the
mismatch will trigger a kCFI violation when mei_lb_push_payload() is
called indirectly.
Update the type parameter of mei_lb_push_payload() to be 'u32' to match
the prototype in 'struct intel_lb_component_ops', clearing up the
warning and kCFI violation.
Fixes: 741eeabb7c78 ("mei: late_bind: add late binding component driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250920-drm-xe-fix-wifpts-v1-1-c89b5357c7ba@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In fastrpc_map_lookup, dma_buf_get is called to obtain a reference to
the dma_buf for comparison purposes. However, this reference is never
released when the function returns, leading to a dma_buf memory leak.
Fix this by adding dma_buf_put before returning from the function,
ensuring that the temporarily acquired reference is properly released
regardless of whether a matching map is found.
Fixes: 9031626ade38 ("misc: fastrpc: Fix fastrpc_map_lookup operation")
Cc: stable@kernel.org
Signed-off-by: Junhao Xie <bigfoot@radxa.com>
Tested-by: Xilin Wu <sophon@radxa.com>
Rule: add
Link: https://lore.kernel.org/stable/48B368FB4C7007A7%2B20251017083906.3259343-1-bigfoot%40radxa.com
Link: https://patch.msgid.link/48B368FB4C7007A7+20251017083906.3259343-1-bigfoot@radxa.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Wildcat Lake P device id.
Cc: stable@vger.kernel.org
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20251016125912.2146136-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a sentence to the driver description to clarify that the sbrmi-i2c
driver is intended to run on the BMC and not on the managed node. Add
platform dependencies accordingly.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/5c9f7100-0e59-4237-a252-43c3ee4802a2@amd.com
Link: https://patch.msgid.link/20251016155040.0e86c102@endymion
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- MCAMSR protocol for revision 0x21 is updated to include the
extended thread supported by the platform.
- This modifies the existing protocol to include additional byte
to provide high thread number.
- New input structure is defined to address this, as the hardware
protocol is tightly coupled with the input structure length
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://patch.msgid.link/20250915103649.1705078-6-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- CPUID protocol for revision 0x21 is updated to include the
extended thread supported by the platform.
- This modifies the existing protocol to include additional byte
to provide high thread number.
- New input structure is defined to address this, as the hardware
protocol is tightly coupled with the input structure length
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://patch.msgid.link/20250915103649.1705078-5-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- CPUID and MCAMSR protocol for newer platform with revision
0x21 and later is modified as per two byte register address size.
- Modify the CPUID and MCAMSR protocol to return error, "-EOPNOTSUPP",
for revision 0x21.
- Next set of patches will add support for CPUID and MCAMSR for Turin and
later platforms.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://patch.msgid.link/20250915103649.1705078-4-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- RMI registers addresses in AMD new platforms are 2 bytes,
on previous processors the address size is 1 byte.
- Implement logic to identify register address size at runtime.
- The identification is done in first transaction using the
Revision register.
- The revision register can be read using 1 byte in both, older and
newer platforms.
- However, sending 1 byte on later platform can cause unrecoverable error.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://patch.msgid.link/20250915103649.1705078-3-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
AMD EPYC platforms with zen5 and later support APML(SB-RMI)
connection to the BMC over I3C bus for faster data transfer
up to 12.5 Mhz.
I2C and I3C is supported in same file using module_i3c_i2c_driver()
with probe based on dts entry.
AMD APML I3C devices support static address for backward compatibility to I2C.
I3C static address can be used to assign I3C device dynamic address.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://patch.msgid.link/20250915103649.1705078-2-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
New AMD processors support APML connection over I3C.
Move the code, common for both I2C and I3C to new helper
function, "sbrmi_common_probe()"
While at it, renaming the static structure regmap_config "sbrmi_i2c_regmap_config"
to "sbrmi_regmap_config" to avoid confusion.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://patch.msgid.link/20250915103649.1705078-1-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The first chip supported by the commented code is CY15B102QN, fix the
copy-paste error.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/20251020145858.1598599-1-alexander.sverdlin@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use min() to simplify lis3lv02d_misc_read().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251016114234.72221-1-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pcim_iomap_table() and pcim_iomap_regions() have been deprecated.
Replace them with pcim_iomap_region().
Signed-off-by: Madhur Kumar <madhurkumar004@gmail.com>
Link: https://patch.msgid.link/20251013132833.1783880-1-madhurkumar004@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct a spelling mistake in vmci_context.h
("receive" was spelled incorrectly).
No functional change.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Link: https://patch.msgid.link/20250911125939.587139-1-weibu@redadmin.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When migrating a balloon page, we first deflate the old page to then
inflate the new page.
However, if inflating the new page succeeded, we effectively deflated the
old page, reducing the balloon size.
In that case, the migration actually worked: similar to migrating+
immediately deflating the new page. The old page will be freed back to
the buddy.
Right now, the core will leave the page be marked as isolated (as we
returned an error). When later trying to putback that page, we will run
into the WARN_ON_ONCE() in balloon_page_putback().
That handling was changed in commit 3544c4faccb8 ("mm/balloon_compaction:
stop using __ClearPageMovable()"); before that change, we would have
tolerated that way of handling it.
To fix it, let's just return 0 in that case, making the core effectively
just clear the "isolated" flag + freeing it back to the buddy as if the
migration succeeded. Note that the new page will also get freed when the
core puts the last reference.
Note that this also makes it all be more consistent: we will no longer
unisolate the page in the balloon driver while keeping it marked as being
isolated in migration core.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251014124455.478345-1-david@redhat.com
Fixes: 3544c4faccb8 ("mm/balloon_compaction: stop using __ClearPageMovable()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit cc0cc23babc9 ("powerpc/xive: Untangle xive from child interrupt
controller drivers") changed xive_irq_data to be stashed to chip_data
instead of handler_data. However, multiple places are still attempting to
read xive_irq_data from handler_data and get a NULL pointer deference bug.
Update them to read xive_irq_data from chip_data.
Non-XIVE files which touch xive_irq_data seem quite strange to me,
especially the ocxl driver. I think there ought to be an alternative
platform-independent solution, instead of touching XIVE's data directly.
Therefore, I think this whole thing should be cleaned up. But perhaps I
just misunderstand something. In any case, this cleanup would not be
trivial; for now, just get things working again.
Fixes: cc0cc23babc9 ("powerpc/xive: Untangle xive from child interrupt controller drivers")
Reported-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Closes: https://lore.kernel.org/linuxppc-dev/68e48df8.170a0220.4b4b0.217d@mx.google.com/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251008081359.1382699-1-namcao@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small nvmem and fastrpc fixes that missed the cut-off to
get into 6.17-final, due to me being slow in getting them out, my
fault, not the maintainers of these subsystems :(
Anyway, better late than never. Changes included in here are:
- nvmem fix for automatic module loading
- fastrpc driver fixes for reported issues
All of these have been in linux-next for weeks (4?) with no reported
issues"
* tag 'char-misc-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: fastrpc: Skip reference for DMA handles
misc: fastrpc: fix possible map leak in fastrpc_put_args
misc: fastrpc: Fix fastrpc_map_lookup operation
misc: fastrpc: Save actual DMA size in fastrpc_map structure
nvmem: layouts: fix automatic module loading
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|
|
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Improve RPMB frame handling code
- Add support for a new max-sd-hs-hz DT property to limit frequency
- Add support to manage regulator-under-voltage events
- Support regulator-under-voltage for eMMC to mitigate data
corruptions
- Add mmc_read_tuning() to allow a host to validate its tuning
sequence
- Add some helpers to align checks for CMD23 support
- Read the CCCR register for SDIO over SPI rather than the
unsupported CMD7
MMC host:
- Add COMPILE_TEST option for a couple of drivers
- Convert drivers to use the modern PM macros
- dw_mmc-exynos: Enable support for the Exynos8890 variant
- mmc_spi: Don't use crc ack during multiple block read
- renesas_sdhi: Enable 64-bit polling mode for R-Car gen3 and
RZ/G2L SoCs
- rtsx_usb: Add support for over-current-protection
- sdhci-cadence: Add support for multi-block read gap tuning
- sdhci-msm:
- Add support for tuning for SDR50 mode for SD cards
- Enable support for the Lemans variant
- sdhci-pci: Disable SD card clock before update for a few
Intel platforms
- sdhci-pxav3: Add support for UHS pinctrl settings
- tmio: Add 64-bit read/write support in polling mode
MEMSTICK:
- Convert to use timeouts to prevent indefinite waiting
- rtsx_usb: Add support for over-current-protection"
* tag 'mmc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (77 commits)
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8890
mmc: select REGMAP_MMIO with MMC_LOONGSON2
mmc: add COMPILE_TEST to multiple drivers
mmc: core: Improve RPMB frame handling code
mmc: core: Fix variable shadowing in mmc_route_rpmb_frames()
mmc: core: Parse and use the new max-sd-hs-hz DT property
dt-bindings: mmc: controller: Add max-sd-hs-hz property
mmc: sdhci-msm: Enable tuning for SDR50 mode for SD card
dt-bindings: mmc: sdhci-msm: Document the Lemans compatible
mmc: sh_mmcif: Remove dummy PM resume callback
dt-bindings: mmc: sdhci-pxa: Add minItems to pinctrl-names
mmc: sdio: Drop dev_pm_domain_detach() call
mmc: dw_mmc-rockchip: use modern PM macros
mmc: dw_mmc-pci: use modern PM macros
mmc: dw_mmc-k3: use modern PM macros
mmc: dw_mmc: exynos: use modern PM macros
mmc: via-sdmmc: use modern PM macros
mmc: sdhci-msm: use modern PM macros
mmc: mtk-sd: use modern PM macros
mmc: wmt-sdmmc: use modern PM macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One notable addition is the creation of the 'transitional' keyword for
kconfig so CONFIG renaming can go more smoothly.
This has been a long-standing deficiency, and with the renaming of
CONFIG_CFI_CLANG to CONFIG_CFI (since GCC will soon have KCFI
support), this came up again.
The breadth of the diffstat is mainly this renaming.
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI"
* tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/string_choices: Add str_assert_deassert() helper
kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
kconfig: Add transitional symbol attribute for migration support
kconfig: Fix BrokenPipeError warnings in selftests
gcc-plugins: Remove TODO_verify_il for GCC >= 16
stddef: Introduce __TRAILING_OVERLAP()
stddef: Remove token-pasting in TRAILING_OVERLAP()
lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
|
|
The kernel's CFI implementation uses the KCFI ABI specifically, and is
not strictly tied to a particular compiler. In preparation for GCC
supporting KCFI, rename CONFIG_CFI_CLANG to CONFIG_CFI (along with
associated options).
Use new "transitional" Kconfig option for old CONFIG_CFI_CLANG that will
enable CONFIG_CFI during olddefconfig.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250923213422.1105654-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Introduce a new MEI client driver to support Late Binding firmware
upload/update for Intel discrete graphics platforms.
Late Binding is a runtime firmware upload/update mechanism that allows
payloads, such as fan control and voltage regulator, to be securely
delivered and applied without requiring SPI flash updates or
system reboots. This driver enables the Xe graphics driver and other
user-space tools to push such firmware blobs to the authentication
firmware via the MEI interface.
The driver handles authentication, versioning, and communication
with the authentication firmware, which in turn coordinates with
the PUnit/PCODE to apply the payload.
This is a foundational component for enabling dynamic, secure,
and re-entrant configuration updates on platforms like Battlemage.
Cc: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250905154953.3974335-3-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Add a new helper function that allows MEI client drivers
to query the maximum transmission unit (MTU) for a connected
MEI client.
This is useful for clients that need to transmit large payloads,
such as firmware blobs, allowing them to determine the maximum
message size that can be safely sent before starting transmission and
size of the buffer to allocate when receiving data.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250905154953.3974335-2-badal.nilawar@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Alexander Usyskin <alexander.usyskin@intel.com> says:
When discrete graphic card enters D3cold th CSC engine is powered down.
On wakeup from the D3cold full HECI link reset is required. The driver
should detect that firmware requests link reset and initiate the link
reset flow.
In the usual flow the connect IOCTL will trigger the wake from D3cold
and corresponding link reset. The MEI driver invalidates all open
handles on link reset including the one that triggered the wake
rendering this connection unusable. To break this loop make connect
detect that it is interrupted by link reset and retry connect attempt
after reset was completed.
Link: https://lore.kernel.org/r/20250918130435.3327400-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Discrete graphic card can go to D3cold.
On the exit from D3cold the link reset is performed.
Driver did not expect such link reset and print warning.
Print debug message for unexpected reset in discrete graphic
case and remove infrastructure to print warning is some cases.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250918130435.3327400-6-alexander.usyskin@intel.com
|
|
There are flows, like exit from D3cold where connect via bus can fail.
Demote error print to debug level to unclutter dmesg.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250918130435.3327400-5-alexander.usyskin@intel.com
|
|
When device is in D3cold the connect message will wake device
and cause link reset.
Link reset flow cleans all queues and wakes all waiters.
Retry the connect flow if connect is failed and link reset is detected.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250918130435.3327400-4-alexander.usyskin@intel.com
|
|
Connect ioctl has the same memory for in and out parameters.
Copy in parameter (client uuid) to the local stack to avoid it be
overwritten by out parameters fill.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250918130435.3327400-3-alexander.usyskin@intel.com
|
|
Driver can receive HW not ready interrupt unexpectedly.
E.g. for cards that go donwn to D3cold.
Trigger link reset in this case to synchronize driver and
firmware state.
No need to do that sync if driver is going down or interrupt is
received before driver started initial link reset sequence.
Introduce UNINITIALIZED device state to allow interrupt handler
to ignore interrupts before first init.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250918130435.3327400-2-alexander.usyskin@intel.com
|
|
The mei disconnect should be the last operation in remove flow.
Otherwise the device is used after destruction.
Fix minor free flow that happens after device destruction too.
The fault leads to the following oops in Intel Gfx CI:
<4>[ 267.871331] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bcb: 0000 [#1] SMP NOPTI
...
<4>[ 267.871410] RIP: 0010:mei_gsc_remove+0x44/0x90 [mei_gsc]
...
<4>[ 267.871555] Call Trace:
<4>[ 267.871562] <TASK>
<4>[ 267.871570] auxiliary_bus_remove+0x1b/0x30
<4>[ 267.871589] device_remove+0x43/0x80
<4>[ 267.871604] device_release_driver_internal+0x215/0x280
<4>[ 267.871619] device_release_driver+0x12/0x20
<4>[ 267.871630] bus_remove_device+0xdc/0x150
<4>[ 267.871645] device_del+0x15f/0x3b0
<4>[ 267.871656] ? bus_unregister_notifier+0x37/0x50
<4>[ 267.871672] gsc_destroy_one.isra.0+0x44/0x210 [i915]
<4>[ 267.872295] intel_gsc_fini+0x28/0x50 [i915]
<4>[ 267.872860] intel_gt_driver_unregister+0x2c/0x80 [i915]
<4>[ 267.873300] i915_driver_remove+0x6e/0x150 [i915]
<4>[ 267.873694] i915_pci_remove+0x1e/0x40 [i915]
<4>[ 267.874095] pci_device_remove+0x3e/0xb0
<4>[ 267.874111] device_remove+0x43/0x80
<4>[ 267.874126] device_release_driver_internal+0x215/0x280
<4>[ 267.874137] ? bus_find_device+0xa5/0xe0
<4>[ 267.874153] device_driver_detach+0x14/0x20
<4>[ 267.874164] unbind_store+0xac/0xc0
<4>[ 267.874178] drv_attr_store+0x21/0x50
<4>[ 267.874190] sysfs_kf_write+0x4a/0x80
<4>[ 267.874204] kernfs_fop_write_iter+0x188/0x240
<4>[ 267.874222] vfs_write+0x283/0x540
<4>[ 267.874241] ksys_write+0x6f/0xf0
<4>[ 267.874253] __x64_sys_write+0x19/0x30
<4>[ 267.874264] x64_sys_call+0x79/0x26a0
<4>[ 267.874277] do_syscall_64+0x93/0xd50
<4>[ 267.874291] ? do_syscall_64+0x1a2/0xd50
<4>[ 267.874301] ? do_syscall_64+0x1a2/0xd50
<4>[ 267.874313] ? do_syscall_64+0x1a2/0xd50
<4>[ 267.874324] ? clear_bhb_loop+0x30/0x80
<4>[ 267.874336] ? clear_bhb_loop+0x30/0x80
<4>[ 267.874349] entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 7704e6be4ed2 ("mei: hook mei_device on class device")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250915124554.2263330-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
generic_delete_inode() is rather misleading for what the routine is
doing. inode_just_drop() should be much clearer.
The new naming is inconsistent with generic_drop_inode(), so rename that
one as well with inode_ as the suffix.
No functional changes.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
At this point MIGRATEPAGE_SUCCESS is misnamed for all folio users,
and now that we remove MIGRATEPAGE_UNMAP, it's really the only "success"
return value that the code uses and expects.
Let's just get rid of MIGRATEPAGE_SUCCESS completely and just use "0"
for success.
Link: https://lkml.kernel.org/r/20250811143949.1117439-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com> [mm]
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> [jfs]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Byungchul Park <byungchul@sk.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If multiple dma handles are passed with same fd over a remote call
the kernel driver takes a reference and expects that put for the
map will be called as many times to free the map. But DSP only
updates the fd one time in the fd list when the DSP refcount
goes to zero and hence kernel make put call only once for the
fd. This can cause SMMU fault issue as the same fd can be used
in future for some other call.
Fixes: 35a82b87135d ("misc: fastrpc: Add dma handle implementation")
Cc: stable@kernel.org
Co-developed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131236.303102-5-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
copy_to_user() failure would cause an early return without cleaning up
the fdlist, which has been updated by the DSP. This could lead to map
leak. Fix this by redirecting to a cleanup path on failure, ensuring
that all mapped buffers are properly released before returning.
Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable@kernel.org
Co-developed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131236.303102-4-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fastrpc driver creates maps for user allocated fd buffers. Before
creating a new map, the map list is checked for any already existing
maps using map fd. Checking with just map fd is not sufficient as the
user can pass offsetted buffer with less size when the map is created
and then a larger size the next time which could result in memory
issues. Check for dma_buf object also when looking up for the map.
Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable@kernel.org
Co-developed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131236.303102-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For user passed fd buffer, map is created using DMA calls. The
map related information is stored in fastrpc_map structure. The
actual DMA size is not stored in the structure. Store the actual
size of buffer and check it against the user passed size.
Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method")
Cc: stable@kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Co-developed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131236.303102-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some platforms (like lemans) feature one or more GPDSPs (General
Purpose DSPs). Similar to other kinds of Hexagon DSPs, they provide
a FastRPC implementation, allowing code execution in both signed and
unsigned protection domains. Extend the checks to allow domain names
starting with "gdsp" (possibly followed by an index).
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131302.303199-5-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the domain ids are added for each instance of domains, this is
totally not scalable approach. Clean this mess and create domain ids for
only domains not its instances.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131302.303199-4-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Domain ID in the uAPI is misleading. Remove checks and log messages
related to 'domain' field in capability structure. Update UAPI to
mark the field as unused.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Ekansh Gupta <ekansh.gupta@oss.qualcomm.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250912131302.303199-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add missing NULL pointer checks after kmalloc() calls in
lkdtm_FORTIFY_STR_MEMBER() and lkdtm_FORTIFY_MEM_MEMBER() functions.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://lore.kernel.org/r/20250814060605.5264-1-junjie.cao@intel.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
mei_device lifetime was managed by devm procedure of parent device.
But such memory is freed on device_del.
Mei_device object is used by client object that may be alive after
parent device is removed.
It may lead to use-after-free if discrete graphics driver unloads
mei_gsc auxiliary device while user-space holds open handle to mei
character device.
Connect mei_device structure lifteme to mei class device lifetime
by adding mei_device free to class device remove callback.
Move exising parent device pointer to separate field in mei_device
to avoid misuse.
Allocate character device dynamically and allow to control its own
lifetime as it may outlive mei_device structure while character
device closes after parent device is removed from the system.
Leave power management on parent device as we overwrite pci runtime
pm procedure and user-space is expecting it there.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14201
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250826125617.1166546-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace kzalloc() followed by copy_from_user() with memdup_user_nul() to
improve and simplify remote_settings_file_write().
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250905103247.423840-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Without CONFIG_REGMAP, rmi-i2c.c fails to build because struct
regmap_config is not defined:
drivers/misc/amd-sbi/rmi-i2c.c: In function ‘sbrmi_i2c_probe’:
drivers/misc/amd-sbi/rmi-i2c.c:57:16: error: variable ‘sbrmi_i2c_regmap_config’ has initializer but incomplete type
57 | struct regmap_config sbrmi_i2c_regmap_config = {
| ^~~~~~~~~~~~~
Additionally, CONFIG_REGMAP_I2C is needed for devm_regmap_init_i2c():
ld: drivers/misc/amd-sbi/rmi-i2c.o: in function `sbrmi_i2c_probe':
drivers/misc/amd-sbi/rmi-i2c.c:69:(.text+0x1c0): undefined reference to `__devm_regmap_init_i2c'
Fixes: 013f7e7131bd ("misc: amd-sbi: Use regmap subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Tested-by: Akshay Gupta <Akshay.Gupta@amd.com>
Reviewed-by: Akshay Gupta <Akshay.Gupta@amd.com>
Link: https://lore.kernel.org/r/20250829091442.1112106-1-max.kellermann@ionos.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a dev_err message that is reporting the value of
cmd->asiv_length when it should be reporting cmd->asv_length
instead. Fix this.
Fixes: eaf4722d4645 ("GenWQE Character device and DDCB queue")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250902113712.2624743-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove hard-coded strings by using the str_enabled_disabled() helper
function and silence the following Coccinelle/coccicheck warning
reported by string_choices.cocci:
opportunity for str_enabled_disabled(..)
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250820102734.760844-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove hard-coded strings by using the str_write_read() helper function
and silence the following two Coccinelle/coccicheck warnings reported by
string_choices.cocci:
opportunity for str_write_read(write)
opportunity for str_write_read(write)
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250820102108.760382-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The error description would be wrong in case the "size" Devicetree
property is missing for an FRAM without device ID.
Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250815095839.4219-4-m.heidelberg@cab.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Not all FRAM chips have a device ID and implement the corresponding read
command. For such chips this led to the following error on module
loading:
at25 spi2.0: Error: no Cypress FRAM (id 00)
The device ID contains the memory size, so devices without this ID are
supported now by setting the size manually in Devicetree using the
"size" property.
Tested with FM25L16B and "size = <2048>;":
at25 spi2.0: 2 KByte fm25 fram, pagesize 4096
According to Infineon/Cypress datasheets, these FRAMs have a device ID:
FM25V01A
FM25V02A
FM25V05
FM25V10
FM25V20A
FM25VN10
but these do not:
FM25040B
FM25640B
FM25C160B
FM25CL64B
FM25L04B
FM25L16B
FM25W256
So all "FM25V*" FRAMs and only these have a device ID. The letter after
"FM25" (V/C/L/W) only describes the voltage range, though.
Link: https://lore.kernel.org/all/20250401133148.38330-1-m.heidelberg@cab.de/
Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250815095839.4219-3-m.heidelberg@cab.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://lore.kernel.org/r/20250821081804.3168680-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Initialization is not needed as memory is already set to 0 by devm_kzalloc.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250804170916.3212221-3-christian.bruel@foss.st.com
|
|
The pci_endpoint_test tests the 32-bit MSI range. However, the device might
not have all vectors configured. For example, if msi_interrupts is 8 in the
ep function space or if the MSI Multiple Message Capable value is
configured as 4 (maximum 16 vectors).
In this case, do not attempt to run the test to avoid timeouts and directly
return the error value.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250804170916.3212221-2-christian.bruel@foss.st.com
|
|
This patch adds support for Over Current Protection (OCP) to the Realtek
USB card reader driver.
The OCP mechanism protects the hardware by detecting and handling current
overload conditions.
This implementation includes:
- Register configurations to enable OCP monitoring.
- Handling of OCP interrupt events and associated error reporting.
- Card power management changes in response to OCP triggers.
This enhancement improves the robustness of the driver when operating in
environments where electrical anomalies may occur, particularly with SD
and MS card interfaces.
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20250812030811.2426112-1-ricky_wu@realtek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
adds support for STMicroelectronics M24LRxx devices, which expose
two separate I2C addresses: one for system control and one for EEPROM
access. The driver implements both a sysfs-based interface for control
registers (e.g. UID, password authentication) and an nvmem provider
for EEPROM access.
Signed-off-by: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Link: https://lore.kernel.org/r/20250717063934.5083-3-abd.masalkhi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drivers/misc/misc_minor_kunit.c is to test APIs defined in
drivers/char/misc.c, but is not in the same directory as the later.
Move misc_minor_kunit.c to drivers/char/.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250714-rfc_miscdev-v6-1-2ed949665bde@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove hard-coded strings by using the str_enabled_disabled() helper
function and silence the following Coccinelle/coccicheck warning
reported by string_choices.cocci:
opportunity for str_enabled_disabled(value)
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20250813180108.209096-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop a return statement that immediately follows another return
statement, and thus is never executed.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/673e667895603b1a1b1ae8ec89e333ac15f4412b.1755090287.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Previously, the Card Detect (CD) and Write Protect (WP) pins shared the
same reverse polarity setting in the configuration space. This meant both
signals were reversed together, without the ability to configure them
individually.
This patch introduces two new parameters:
sd_cd_reverse_en – enable reverse polarity for the CD pin.
sd_wp_reverse_en – enable reverse polarity for the WP pin.
With this change, the controller can now support:
1.Reversing both CD and WP pins together (original behavior).
2.Reversing CD and WP pins separately (newly added behavior), if
supported by the configuration space.
This provides greater flexibility when dealing with devices that have
independent polarity requirements for CD and WP pins.
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20250812063521.2427696-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is are spelling mistakes in the SENSORS_LIS3_SPI and SENSORS_LIS3_I2C
Kconfig. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250724105422.140186-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Validate that all indirect calls adhere to kCFI rules. Notably doing
nocfi indirect call to a cfi function is broken.
Apparently some Rust 'core' code violates this and explodes when ran
with FineIBT.
All the ANNOTATE_NOCFI_SYM sites are prime targets for attackers.
- runtime EFI is especially henous because it also needs to disable
IBT. Basically calling unknown code without CFI protection at
runtime is a massice security issue.
- Kexec image handover; if you can exploit this, you get to keep it :-)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lkml.kernel.org/r/20250714103441.496787279@infradead.org
|
|
Commit eefb83790a0d ("misc: pci_endpoint_test: Add doorbell test case")
added NO_BAR (-1) to the pci_barno enum which, in practical terms,
changes the enum from an unsigned int to a signed int. If the user
passes a negative number in pci_endpoint_test_ioctl() then it results in
an array underflow in pci_endpoint_test_bar().
Fixes: eefb83790a0d ("misc: pci_endpoint_test: Add doorbell test case")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/aIzzZ4vc6ZrmM9rI@suswa
|
|
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs, and
new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly, the
SoC specific firmware on Tegra and Qualcomm get minor enhancements and
chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes"
* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
bus: del unnecessary init var
soc: fsl: qe: convert set_multiple() to returning an integer
pinctrl: rp1: use new GPIO line value setter callbacks
soc: hisilicon: kunpeng_hccs: Fix incorrect log information
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
memory: tegra: Add Tegra264 MC and EMC support
firmware: tegra: bpmp: Fix build failure for tegra264-only config
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The big change in this release is the addition of Rust bindings from
Daniel Almeida, allowing fairly basic consumer use with support for
enable and voltage setting operations. This should be good for the
vast majority of consumers.
Otherwise it's been quite quiet, a few new devices supported, plus
some cleanups and fixes.
Summary:
- Basic Rust bindings
- A fix for making large voltage changes on regulators where we limit
the size of voltage change we will do in one step, previously we
just got as close as we could in one step
- Cleanups of our usage of the PM autosuspend functions, this pulls
in some PM core changes on a shared tag
- Mode setting support for PCA9450
- Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and
PMR735B, Raspberry Pi displays and TI TPS652G1
The TI driver pulls in the MFD portion of the support for the device
and the pinctrl driver which was in the same tag"
* tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits)
regulator: mt6370: Fix spelling mistake in mt6370_regualtor_register
regulator: Kconfig: Fix spelling mistake "regualtor" -> "regulator"
regulator: core: repeat voltage setting request for stepped regulators
regulator: rt6160: Add rt6166 vout min_uV setting for compatible
MAINTAINERS: add regulator.rs to the regulator API entry
rust: regulator: add a bare minimum regulator abstraction
regulator: tps6286x-regulator: Fix a copy & paste error
regulator: qcom-rpmh: add support for pm7550 regulators
regulator: qcom-rpmh: add support for pmr735b regulators
regulator: dt-bindings: qcom,rpmh: Add PMR735B compatible
regulator: dt-bindings: qcom,rpmh: Add PM7550 compatible
regulator: tps6594-regulator: Add TI TPS652G1 PMIC regulators
regulator: tps6594-regulator: refactor variant descriptions
regulator: tps6594-regulator: remove hardcoded buck config
regulator: tps6594-regulator: remove interrupt_count
dt-bindings: mfd: ti,tps6594: Add TI TPS652G1 PMIC
pinctrl: pinctrl-tps6594: Add TPS652G1 PMIC pinctrl and GPIO
misc: tps6594-pfsm: Add TI TPS652G1 PMIC PFSM
mfd: tps6594: Add TI TPS652G1 support
regulator: sy8827n: make enable gpio NONEXCLUSIVE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver (Apple SMC) and extensions to existing drivers
for supporting new HW models. A lot of different impovements across
drivers and in core GPIO code. Details on that are in the signed tag
as usual.
We managed to remove some of the legacy APIs. Arnd Bergmann started to
work on making the legacy bits optional so that we may compile them
only for older platforms that still really need them.
Rob Herring has done a lot of work to convert legacy .txt dt-bindings
for GPIO controllers to YAML. There are only a few left now in the
GPIO tree.
A big part of the commits in this PR concern the conversion of GPIO
drivers to using the new line value setter callbacks. This conversion
is now complete treewide (unless I've missed something) and once all
the changes from different trees land in mainline, I'll send you
another PR containing a commit dropping the legacy callbacks from the
tree.
As the quest to pay back technical dept never really ends, we're
starting another set of interface conversions, this time it's about
moving fields specific to only a handful of drivers using the
gpio-mmio helper out of the core gpio_chip structure that every
controller implements and uses. This cycle we introduce a new set of
APIs and convert a few drivers under drivers/gpio/, next cycle we'll
convert remaining modules treewide (in gpio, pinctrl and mfd trees)
and finally remove the old interfaces and move the gpio-mmio fields
into their own structure wrapping gpio_chip.
One last change I should mention here is the rework of the sysfs
interface. In 2016, we introduced the GPIO character device as the
preferred alternative to the sysfs class under /sys/class/gpio. While
it has seen a wide adoption with the help of its user-space
counterpart - libgpiod - there are still users who prefer the
simplicity of sysfs.
As far as the GPIO subsystem is concerned, the problem is not the
existince of the GPIO class as such but rather the fact that it
exposes the global GPIO numbers to the user-space, stopping us from
ever being able to remove the numberspace from the kernel. To that
end, this release we introduced a parallel, limited sysfs interface
that doesn't expose these numbers and only implements a subset of
features that are relevant to the existing users. This is a result of
several discussions over the course of last year and should allow us
to remove the legacy part some time in the future.
Summary:
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose
the global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the
existing interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more
users
- start the process of allowing to compile-out the legacy parts of
the GPIO core for users who don't need it by introducing a new
Kconfig option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio
helper out of the core struct gpio_chip into their own structure
that wraps it: create a new header with modern interfaces and
convert several drivers to using it
- remove the platform data structure associated with the gpio-mmio
helper from the kernel after having converted all remaining users
to generic device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value
setter callbacks
- convert gpio-rcar to using simple device power management ops
callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already
handles that
- also drop unneeded GPIO range checks in drivers, the core already
makes sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the
user wants to change direction of the pin to output even though
these drivers don't need to do anything else to actually set the
direction, otherwise a call like gpiod_direction_output(d, 1) will
not result in the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases
where the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in
gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different
devices to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of
simple hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the
arguments in some functions, remove duplicate includes, etc.
- documentation updates"
* tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits)
MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips
gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB
gpio: virtio: Fix config space reading.
gpiolib: make legacy interfaces optional
dt-bindings: gpio: rockchip: Allow use of a power-domain
gpiolib: of: add forward declaration for struct device_node
power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC
gpio: Add new gpio-macsmc driver for Apple Macs
mfd: Add Apple Silicon System Management Controller
soc: apple: rtkit: Make shmem_destroy optional
dt-bindings: mfd: Add Apple Mac System Management Controller
dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller
dt-bindings: gpio: Add Apple Mac SMC GPIO block
gpio: cadence: Remove duplicated include in gpio-cadence.c
gpio: tps65219: Add support for TI TPS65214 PMIC
gpio: tps65219: Update _IDX & _OFFSET macro prefix
gpio: sysfs: Fix an end of loop test in gpiod_unexport()
dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema
dt-bindings: gpio: Convert maxim,max3191x to DT schema
dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
* tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
sched/task_stack: Add missing const qualifier to end_of_stack()
kstack_erase: Support Clang stack depth tracking
kstack_erase: Add -mgeneral-regs-only to silence Clang warnings
init.h: Disable sanitizer coverage for __init and __head
kstack_erase: Disable kstack_erase for all of arm compressed boot code
x86: Handle KCOV __init vs inline mismatches
arm64: Handle KCOV __init vs inline mismatches
s390: Handle KCOV __init vs inline mismatches
arm: Handle KCOV __init vs inline mismatches
mips: Handle KCOV __init vs inline mismatch
powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section
configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON
configs/hardening: Enable CONFIG_KSTACK_ERASE
stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS
stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth
stackleak: Rename STACKLEAK to KSTACK_ERASE
seq_buf: Introduce KUnit tests
string: Group str_has_prefix() and strstarts()
kunit/fortify: Add back "volatile" for sizeof() constants
acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings
...
|
|
Add doorbell support with the help of three new registers:
PCIE_ENDPOINT_TEST_DB_BAR, PCIE_ENDPOINT_TEST_DB_ADDR, and
PCIE_ENDPOINT_TEST_DB_DATA.
The testcase works by triggering the doorbell in Endpoint by writing the
value from PCI_ENDPOINT_TEST_DB_DATA register to the address provided by
PCI_ENDPOINT_TEST_DB_OFFSET register of the BAR indicated by the
PCIE_ENDPOINT_TEST_DB_BAR register and waiting for the completion status
from the Endpoint.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: removed one spurious change and reworded the commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-7-57683fc7fb25@nxp.com
|
|
of_node_to_fwnode() is an irqdomain's reimplementation of the
"officially" defined of_fwnode_handle(). The former is in the process of
being removed, so use the latter instead.
This is the last in-tree user.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Fixes: 1e5c9b1efa1c ("misc: add FPC202 dual port controller driver")
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250723053516.1796097-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In preparation for adding Clang sanitizer coverage stack depth tracking
that can support stack depth callbacks:
- Add the new top-level CONFIG_KSTACK_ERASE option which will be
implemented either with the stackleak GCC plugin, or with the Clang
stack depth callback support.
- Rename CONFIG_GCC_PLUGIN_STACKLEAK as needed to CONFIG_KSTACK_ERASE,
but keep it for anything specific to the GCC plugin itself.
- Rename all exposed "STACKLEAK" names and files to "KSTACK_ERASE" (named
for what it does rather than what it protects against), but leave as
many of the internals alone as possible to avoid even more churn.
While here, also split "prev_lowest_stack" into CONFIG_KSTACK_ERASE_METRICS,
since that's the only place it is referenced from.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250717232519.2984886-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Use client-aware print macro instead of usual device print in more
places to expand debug-ability.
The client-aware print macro prefixes the usual device print with
current connection endpoints.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250717141112.1696482-3-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For unifomity, print using client device on bus where possible.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250717141112.1696482-2-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250717130357.53491-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
As of commit 92ac7de3175e3 ("gpiolib: don't allow setting values on input
lines"), the GPIO core makes sure values cannot be set on input lines.
Remove the unnecessary check.
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250717130357.53491-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
- New AMD processor will support different input/output for same command.
- In some scenarios the input value is not cleared, which will be added to
output before reporting the data.
- Clearing input explicitly will be a cleaner and safer approach.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250716110729.2193725-3-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch warnings are reported for below commit,
Commit bb13a84ed6b7 ("misc: amd-sbi: Add support for CPUID protocol")
from Apr 28, 2025 (linux-next), leads to the following Smatch static
checker warning:
drivers/misc/amd-sbi/rmi-core.c:376 apml_rmi_reg_xfer() warn: maybe return -EFAULT instead of the bytes remaining?
drivers/misc/amd-sbi/rmi-core.c:394 apml_mailbox_xfer() warn: maybe return -EFAULT instead of the bytes remaining?
drivers/misc/amd-sbi/rmi-core.c:411 apml_cpuid_xfer() warn: maybe return -EFAULT instead of the bytes remaining?
drivers/misc/amd-sbi/rmi-core.c:428 apml_mcamsr_xfer() warn: maybe return -EFAULT instead of the bytes remaining?
copy_to/from_user() returns number of bytes, not copied.
In case data not copied, return "-EFAULT".
Additionally, fixes the "-EPROTOTYPE" error return as intended.
Fixes: 35ac2034db72 ("misc: amd-sbi: Add support for AMD_SBI IOCTL")
Fixes: bb13a84ed6b7 ("misc: amd-sbi: Add support for CPUID protocol")
Fixes: 69b1ba83d21c ("misc: amd-sbi: Add support for read MCA register protocol")
Fixes: cf141287b774 ("misc: amd-sbi: Add support for register xfer")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aDVyO8ByVsceybk9@stanley.mountain/
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250716110729.2193725-2-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch warnings are reported for below commit,
Commit bb13a84ed6b7 ("misc: amd-sbi: Add support for CPUID protocol")
from Apr 28, 2025 (linux-next), leads to the following Smatch static
checker warning:
drivers/misc/amd-sbi/rmi-core.c:132 rmi_cpuid_read() warn: bitwise OR is zero '0xffffffff00000000 & 0xffff'
drivers/misc/amd-sbi/rmi-core.c:132 rmi_cpuid_read() warn: potential integer overflow from user 'msg->cpu_in_out << 32'
drivers/misc/amd-sbi/rmi-core.c:213 rmi_mca_msr_read() warn: bitwise OR is zero '0xffffffff00000000 & 0xffff'
drivers/misc/amd-sbi/rmi-core.c:213 rmi_mca_msr_read() warn: potential integer overflow from user 'msg->mcamsr_in_out << 32'
CPUID & MCAMSR thread data from input is available at byte 4 & 5, this
patch fixes to copy the user data correctly in the argument.
Previously, CPUID and MCAMSR data is return only for thread 0.
Fixes: bb13a84ed6b7 ("misc: amd-sbi: Add support for CPUID protocol")
Fixes: 69b1ba83d21c ("misc: amd-sbi: Add support for read MCA register protocol")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aDVyO8ByVsceybk9@stanley.mountain/
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250716110729.2193725-1-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a card is present in the reader, the driver currently defers
autosuspend by returning -EAGAIN during the suspend callback to
trigger USB remote wakeup signaling. However, this does not guarantee
that the mmc child device has been resumed, which may cause issues if
it remains suspended while the card is accessible.
This patch ensures that all child devices, including the mmc host
controller, are explicitly resumed before returning -EAGAIN. This
fixes a corner case introduced by earlier remote wakeup handling,
improving reliability of runtime PM when a card is inserted.
Fixes: 883a87ddf2f1 ("misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection")
Cc: stable@vger.kernel.org
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250711140143.2105224-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace the RAW SPI accesses with spi-mem API. The latter will fall back to
RAW SPI accesses if spi-mem callbacks are not implemented by a controller
driver.
Notable advantages:
- read function now allocates a bounce buffer for SPI DMA compatibility,
similar to write function;
- the driver can now be used in conjunction with SPI controller drivers
providing spi-mem API only, e.g. spi-nxp-fspi.
- during the initial probe the driver polls busy/ready status bit for 25ms
instead of giving up instantly and hoping that the FW didn't write the
EEPROM
Notes:
- mutex_lock() has been dropped from fm25_aux_read() because the latter is
only being called in probe phase and therefore cannot race with
at25_ee_read() or at25_ee_write()
Quick 4KB block size test with CY15B102Q 256KB F-RAM over spi_omap2_mcspi
driver (no spi-mem ops provided, fallback to raw SPI inside spi-mem):
OP | throughput, KB/s | change
--------+-----------------------+-------
write | 1717.847 -> 1656.684 | -3.6%
read | 1115.868 -> 1059.367 | -5.1%
The lower throughtput probably comes from the 3 messages per SPI transfer
inside spi-mem instead of hand-crafted 2 messages per transfer in the
former at25 code. However, if the raw SPI access is not preserved, then
the driver doesn't grow from the lines-of-code perspective and subjectively
could be considered even a bit simpler.
Higher performance impact on the read operation could be explained by the
newly introduced bounce buffer in read operation. I didn't find any
explanation or guarantee, why would a bounce buffer be not needed on the
read side, so I assume it's a pure luck that nobody read EEPROM into
some variable on stack on an architecture where kernel stack would be
not DMA-able.
Cc: Michael Walle <mwalle@kernel.org>
Cc: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/all/28ab8b72afee1af59b628f7389f0d7f5@kernel.org/
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250702222823.864803-1-alexander.sverdlin@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The reproducer executes the host's unlocked_ioctl call in two different
tasks. When init_context fails, the struct vmci_event_ctx is not fully
initialized when executing vmci_datagram_dispatch() to send events to all
vm contexts. This affects the datagram taken from the datagram queue of
its context by another task, because the datagram payload is not initialized
according to the size payload_size, which causes the kernel data to leak
to the user space.
Before dispatching the datagram, and before setting the payload content,
explicitly set the payload content to 0 to avoid data leakage caused by
incomplete payload initialization.
To avoid the oob check failure when executing __compiletime_lessthan()
in memset(), directly use the address of the vmci_event_ctx instance ev
to replace ev.msg.hdr, because their addresses are the same.
Fixes: 28d6692cd8fb ("VMCI: context implementation.")
Reported-by: syzbot+9b9124ae9b12d5af5d95@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9b9124ae9b12d5af5d95
Tested-by: syzbot+9b9124ae9b12d5af5d95@syzkaller.appspotmail.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://lore.kernel.org/r/20250703075334.856445-1-lizhi.xu@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Infineon seems to be confused with the order ID bytes should be presented
by the FRAM chips and to be on the safe side they offer chips which are
either JEDEC conform or the full opposite of the latter.
Examples of the chips which present ID bytes in the reversed order are:
CY15B102QN
CY15B204QSN
Let's support them nevertheless. Except reversing the ID bytes, they also
have quite different density encoding even across EXCELON(tm) family.
The patch has been tested with the above two chips.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250702222927.864875-1-alexander.sverdlin@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
The error handling is a bit different. "memory-region" is optional, so
failed lookup is not an error. But then an error in
of_reserved_mem_lookup() is treated as an error. However, that
distinction is not really important. Either the region is available
and usable or it is not. So now, it is just
of_reserved_mem_region_to_resource() which is checked for an error.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250703183455.2074215-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Let's move the removal of the page from the balloon list into the single
caller, to remove the dependency on the PG_isolated flag and clarify
locking requirements.
Note that for now, balloon_page_delete() was used on two paths:
(1) Removing a page from the balloon for deflation through
balloon_page_list_dequeue()
(2) Removing an isolated page from the balloon for migration in the
per-driver migration handlers. Isolated pages were already removed from
the balloon list during isolation.
So instead of relying on the flag, we can just distinguish both cases
directly and handle it accordingly in the caller.
We'll shuffle the operations a bit such that they logically make more
sense (e.g., remove from the list before clearing flags).
In balloon migration functions we can now move the balloon_page_finalize()
out of the balloon lock and perform the finalization just before dropping
the balloon reference.
Document that the page lock is currently required when modifying the
movability aspects of a page; hopefully we can soon decouple this from the
page lock.
Link: https://lkml.kernel.org/r/20250704102524.326966-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The TPS652G1 is a stripped down TPS65224, but the PFSM is the same.
Thus, handle it the same way as the TPS65224 in the driver.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de> # drivers/misc/
Link: https://lore.kernel.org/r/20250613114518.1772109-3-mwalle@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This reverts commit bfb4cf9fb97e4063f0aa62e9e398025fb6625031.
While the code "looks" correct, the compiler has no way to know that
doing "fun" pointer math like this really isn't a write off the end of
the structure as there is no hint anywhere that the structure has data
at the end of it.
This causes the following build warning:
In function 'fortify_memset_chk',
inlined from 'ctx_fire_notification.isra' at drivers/misc/vmw_vmci/vmci_context.c:254:3:
include/linux/fortify-string.h:480:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
480 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
So revert it for now and it can come back in the future in a "sane" way
that either correctly makes the structure know that there is trailing
data, OR just the payload structure is properly referenced and zeroed
out.
Fixes: bfb4cf9fb97e ("vmci: Prevent the dispatching of uninitialized payloads")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://lore.kernel.org/r/20250703171021.0aee1482@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The reproducer executes the host's unlocked_ioctl call in two different
tasks. When init_context fails, the struct vmci_event_ctx is not fully
initialized when executing vmci_datagram_dispatch() to send events to all
vm contexts. This affects the datagram taken from the datagram queue of
its context by another task, because the datagram payload is not initialized
according to the size payload_size, which causes the kernel data to leak
to the user space.
Before dispatching the datagram, and before setting the payload content,
explicitly set the payload content to 0 to avoid data leakage caused by
incomplete payload initialization.
Fixes: 28d6692cd8fb ("VMCI: context implementation.")
Reported-by: syzbot+9b9124ae9b12d5af5d95@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9b9124ae9b12d5af5d95
Tested-by: syzbot+9b9124ae9b12d5af5d95@syzkaller.appspotmail.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://lore.kernel.org/r/20250627055214.2967129-1-lizhi.xu@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add test cases for static and dynamic minor number allocation and
deallocation.
While at it, improve description and test suite name.
Some of the cases include:
- that static and dynamic allocation reserved the expected minors.
- that registering duplicate minors or duplicate names will fail.
- that failing to create a sysfs file (due to duplicate names) will
deallocate the dynamic minor correctly.
- that dynamic allocation does not allocate a minor number in the static
range.
- that there are no collisions when mixing dynamic and static allocations.
- that opening devices with various minor device numbers work.
- that registering a static number in the dynamic range won't conflict with
a dynamic allocation.
This last test verifies the bug fixed by commit 6d04d2b554b1 ("misc:
misc_minor_alloc to use ida for all dynamic/misc dynamic minors") has not
regressed.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250612-misc-dynrange-v5-1-6f35048f7273@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove hard-coded strings by using the str_on_off() helper.
Signed-off-by: Yumeng Fang <fang.yumeng@zte.com.cn>
Link: https://lore.kernel.org/r/20250623202944425TQzPdeMtYA8qRtlrnwiR8@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support for the Realtek RTS5264 Version B
card reader controller.
To support this chip revision, the driver introduces specific
initialization logic to handle the hardware requirements of
Version B. The probe flow is updated to detect this version
and apply the necessary register configurations.
Additionally, the initialization sequence for Version B has
been optimized to improve robustness and ensure proper device
setup during power-on.
These changes ensure correct operation and compatibility with
systems using RTS5264 Version B.
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20250620071325.1887017-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace scnprintf() with sysfs_emit() in sysfs show functions.
These helpers are preferred in sysfs callbacks because they automatically
handle buffer size and improve safety and readability.
Signed-off-by: Ankit Chauhan <ankitchauhan2065@gmail.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20250620024705.11321-1-ankitchauhan2065@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
vmci_qpair_dequeue(), vmci_qpair_enqueue() and vmci_qpair_peek()
were added in 2013 by
commit 06164d2b72aa ("VMCI: queue pairs implementation.")
but have remained unused.
Remove them.
(The iov version of those functions is used)
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250614010344.636076-4-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
vmci_doorbell_notify() was added in 2013 by
commit 83e2ec765be0 ("VMCI: doorbell implementation.")
but has remained unused.
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250614010344.636076-3-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
vmci_ctx_dbell_destroy_all() and vmci_ctx_pending_datagrams()
were added in 2013 by
commit 28d6692cd8fb ("VMCI: context implementation.")
but have remained unused.
Remove them.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250614010344.636076-2-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250611104348.192092-14-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The binary attribute const changes recently for the sram driver were
made in a way that hid the fact that we would be casting a const pointer
to a non-const one. So explicitly make the cast so that it is obvious
and preserve the const pointer in the sram_reserve_cmp() function.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Fixes: c3b8c358c4f3 ("misc: sram: constify 'struct bin_attribute'")
Link: https://lore.kernel.org/r/2025052125-squid-sandstorm-a418@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mei_cl_bus_dev_release() also frees the mei-client (struct mei_cl)
belonging to the device being released.
If there are bugs like the just fixed bug in the ACE/CSI2 mei drivers,
the mei-client being freed might still be part of the mei_device's
file_list and iterating over this list after the freeing will then trigger
a use-afer-free bug.
Add a check to mei_cl_bus_dev_release() to make sure that the to-be-freed
mei-client is not on the mei_device's file_list.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250623085052.12347-11-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Kernels build with CONFIG_PROVE_RAW_LOCK_NESTING report the following
tp-vsc lockdep error:
=============================
[ BUG: Invalid wait context ]
...
swapper/10/0 is trying to lock:
ffff88819c271888 (&tp->xfer_wait){....}-{3:3},
at: __wake_up (kernel/sched/wait.c:106 kernel/sched/wait.c:127)
...
Call Trace:
<IRQ>
...
__raw_spin_lock_irqsave (./include/linux/spinlock_api_smp.h:111)
__wake_up (kernel/sched/wait.c:106 kernel/sched/wait.c:127)
vsc_tp_isr (drivers/misc/mei/vsc-tp.c:110) mei_vsc_hw
__handle_irq_event_percpu (kernel/irq/handle.c:158)
handle_irq_event (kernel/irq/handle.c:195 kernel/irq/handle.c:210)
handle_edge_irq (kernel/irq/chip.c:833)
...
</IRQ>
The root-cause of this is the IRQF_NO_THREAD flag used by the intel-pinctrl
code. Setting IRQF_NO_THREAD requires all interrupt handlers for GPIO ISRs
to use raw-spinlocks only since normal spinlocks can sleep in PREEMPT-RT
kernels and with IRQF_NO_THREAD the interrupt handlers will always run in
an atomic context [1].
vsc_tp_isr() calls wake_up(&tp->xfer_wait), which uses a regular spinlock,
breaking the raw-spinlocks only rule for Intel GPIO ISRs.
Make vsc_tp_isr() run as threaded ISR instead of as hard ISR to fix this.
Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device")
Link: https://lore.kernel.org/linux-gpio/18ab52bd-9171-4667-a600-0f52ab7017ac@kernel.org/ [1]
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250623085052.12347-10-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The event_notify callback in some cases calls vsc_tp_xfer(), which checks
tp->assert_cnt and waits for it through the tp->xfer_wait wait-queue.
And tp->assert_cnt is increased and the tp->xfer_wait queue is woken o
from the interrupt handler.
So the interrupt handler which is running the event callback is waiting for
itself to signal that it can continue.
This happens to work because the event callback runs from the threaded
ISR handler and while that is running the hard ISR handler will still
get called a second / third time for further interrupts and it is the hard
ISR handler which does the atomic_inc() and wake_up() calls.
But having the threaded ISR handler wait for its own interrupt to trigger
again is not how a threaded ISR handler is supposed to be used.
Move the running of the event callback from a threaded interrupt handler
to a workqueue since a threaded ISR should not wait for events from its
own interrupt.
This is a preparation patch for moving the atomic_inc() and wake_up() calls
to the threaded ISR handler, which is necessary to fix a locking issue.
Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device")
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250623085052.12347-9-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make mei_vsc_remove() properly unset the callback to avoid a dead callback
sticking around after probe errors or unbinding of the platform driver.
Fixes: 386a766c4169 ("mei: Add MEI hardware support for IVSC device")
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250623085052.12347-8-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
vsc_tp_register_event_cb() can race with vsc_tp_thread_isr(), add a mutex
to protect against this.
Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device")
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250623085052.12347-7-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The event_notify callback which runs from vsc_tp_thread_isr may call
vsc_tp_xfer() which locks the mutex. So the ISR depends on the mutex.
Move the mutex_destroy() call to after free_irq() to ensure that the ISR
is not running while the mutex is destroyed.
Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device")
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250623085052.12347-6-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After removing the vsc_tp_reset() call from vsc_tp_shutdown() it is now
identical to vsc_tp_remove().
Use vsc_tp_remove() as shutdown handler and remove vsc_tp_shutdown().
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250623085052.12347-5-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that mei_vsc_hw_reset() no longer re-inits the VSC when called from
mei_stop(), vsc_tp_shutdown() unregistering the platform-device, which
runs mei_stop() is sufficient to put the VSC in a clean state.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250623085052.12347-4-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mei_vsc_hw_reset() gets called from mei_start() and mei_stop() in
the latter case we do not need to re-init the VSC by calling vsc_tp_init().
mei_stop() only happens on shutdown and driver unbind. On shutdown we
don't need to load + boot the firmware and if the driver later is
bound to the device again then mei_start() will do another reset.
The intr_enable flag is true when called from mei_start() and false on
mei_stop(). Skip vsc_tp_init() when intr_enable is false.
This avoids unnecessarily uploading the firmware, which takes 11 seconds.
This change reduces the poweroff/reboot time by 11 seconds.
Fixes: 386a766c4169 ("mei: Add MEI hardware support for IVSC device")
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250623085052.12347-3-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the unused vsc_tp_request_irq() and vsc_tp_free_irq() functions.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250623085052.12347-2-hansg@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update all device attribute show callbacks in the MEI bus driver to use
sysfs_emit(), as recommended by Documentation/filesystems/sysfs.rst.
This improves consistency and aligns with current sysfs guidelines,
even though the existing use of sprintf/scnprintf is functionally safe.
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Acked-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250620181144.10750-1-moonhee.lee.ca@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The normal bin_attrs field can now handle const pointers.
This makes the _new variant unnecessary.
Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-4-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The bin_attribute argument of bin_attribute::read() is now const.
This makes the _new() callbacks unnecessary. Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The RaspberryPi RP1 is a PCI multi function device containing
peripherals ranging from Ethernet to USB controller, I2C, SPI
and others.
Implement a bare minimum driver to operate the RP1, leveraging
actual OF based driver implementations for the on-board peripherals
by loading a devicetree overlay during driver probe if the RP1
node is not already present in the DT.
The peripherals are accessed by mapping MMIO registers starting
from PCI BAR1 region.
With the overlay approach we can achieve more generic and agnostic
approach to managing this chipset, being that it is a PCI endpoint
and could possibly be reused in other hw implementations. The
presented approach is also used by Bootlin's Microchip LAN966x
patchset (see link) as well, for a similar chipset.
In this case, the inclusion tree for the DT overlay is as follow
(the arrow points to the includer):
rp1-pci.dtso <---- rp1-common.dtsi
On the other hand, to ensure compatibility with downstream, this
driver can also work with a DT already comprising the RP1 node, so
the dynamically loaded overlay will not be used if the DT is already
fully defined.
The reason why this driver is contained in drivers/misc has
been paved by Bootlin's LAN966X driver, which first used the
overlay approach to implement non discoverable peripherals behind a
PCI bus. For RP1, the same arguments apply: it's not used as an SoC
since the driver code is not running on-chip and is not like an MFD
since it does not really need all the MFD infrastructure (shared regs,
etc.). So, for this particular use, misc has been proposed and deemed
as a good choice. For further details about that please check the links.
This driver is heavily based on downstream code from RaspberryPi
Foundation, and the original author is Phil Elwell.
Link: https://datasheets.raspberrypi.com/rp1/rp1-peripherals.pdf
Link: https://lore.kernel.org/all/20240612140208.GC1504919@google.com/
Link: https://lore.kernel.org/all/83f7fa09-d0e6-4f36-a27d-cee08979be2a@app.fastmail.com/
Link: https://lore.kernel.org/all/2024081356-mutable-everyday-6f9d@gregkh/
Link: https://lore.kernel.org/all/20240808154658.247873-1-herve.codina@bootlin.com/
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # quirks.c, pci_ids.h
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250529135052.28398-7-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core:
- Introduction of iommu-pages infrastructure to consolitate
page-table allocation code among hardware drivers. This is
ground-work for more generalization in the future
- Remove IOMMU_DEV_FEAT_SVA and IOMMU_DEV_FEAT_IOPF feature flags
- Convert virtio-iommu to domain_alloc_paging()
- KConfig cleanups
- Some small fixes for possible overflows and race conditions
Intel VT-d driver:
- Restore WO permissions on second-level paging entries
- Use ida to manage domain id
- Miscellaneous cleanups
AMD-Vi:
- Make sure notifiers finish running before module unload
- Add support for HTRangeIgnore feature
- Allow matching ACPI HID devices without matching UIDs
ARM-SMMU:
- SMMUv2:
- Recognise the compatible string for SAR2130P MDSS in the
Qualcomm driver, as this device requires an identity domain
- Fix Adreno stall handling so that GPU debugging is more robust
and doesn't e.g. result in deadlock
- SMMUv3:
- Fix ->attach_dev() error reporting for unrecognised domains
- IO-pgtable:
- Allow clients (notably, drivers that process requests from
userspace) to silence warnings when mapping an already-mapped
IOVA
S390:
- Add support for additional table regions
Mediatek:
- Add support for MT6893 MM IOMMU
And some smaller fixes and improvements in various other drivers"
* tag 'iommu-updates-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (75 commits)
iommu/vt-d: Restore context entry setup order for aliased devices
iommu/mediatek: Fix compatible typo for mediatek,mt6893-iommu-mm
iommu/arm-smmu-qcom: Make set_stall work when the device is on
iommu/arm-smmu: Move handing of RESUME to the context fault handler
iommu/arm-smmu-qcom: Enable threaded IRQ for Adreno SMMUv2/MMU500
iommu/io-pgtable-arm: Add quirk to quiet WARN_ON()
iommu: Clear the freelist after iommu_put_pages_list()
iommu/vt-d: Change dmar_ats_supported() to return boolean
iommu/vt-d: Eliminate pci_physfn() in dmar_find_matched_satc_unit()
iommu/vt-d: Replace spin_lock with mutex to protect domain ida
iommu/vt-d: Use ida to manage domain id
iommu/vt-d: Restore WO permissions on second-level paging entries
iommu/amd: Allow matching ACPI HID devices without matching UIDs
iommu: make inclusion of arm/arm-smmu-v3 directory conditional
iommu: make inclusion of riscv directory conditional
iommu: make inclusion of amd directory conditional
iommu: make inclusion of intel directory conditional
iommu: remove duplicate selection of DMAR_TABLE
iommu/fsl_pamu: remove trailing space after \n
iommu/arm-smmu-qcom: Add SAR2130P MDSS compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core updates:
- move towards using the 'fwnode' handle instead of 'of_node'
(meaning 'of_node' even gets removed from i2c_board_info)
- add support for Write Disable-aware SPD eeproms
- minor stuff (use new helpers, typo fixes)
i2c-atr (address translator) updates:
- support per-channel alias pools
- added support for dynamic address translation (also adds FPC202
driver as its user)
- add 'static' and 'passthrough' flags
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)"
* tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (89 commits)
i2c: Use str_read_write() helper
i2c: mlxbf: avoid 64-bit division
i2c: viai2c-wmt: Replace dev_err() with dev_err_probe() in probe function
i2c: designware: Don't warn about missing get_clk_rate_khz
i2c: designware: Invoke runtime suspend on quick slave re-registration
i2c-mlxbf: Improve I2C bus timing configuration
i2c-mlxbf: Add repeated start condition support
i2c: xgene-slimpro: Replace dev_err() with dev_err_probe() in probe function
dt-bindings: i2c: i2c-wmt: Convert to YAML
i2c: microchip-corei2c: add smbus support
i2c: mlxbf: Allow build with COMPILE_TEST
i2c: I2C_DESIGNWARE_AMDISP should depend on DRM_AMD_ISP
i2c: atr: add passthrough flag
i2c: atr: add static flag
i2c: atr: allow replacing mappings in attach_addr()
i2c: atr: deduplicate logic in attach_addr()
i2c: atr: do not create mapping in detach_addr()
i2c: atr: split up i2c_atr_get_mapping_by_addr()
i2c: atr: find_mapping() -> get_mapping()
i2c: atr: Fix lockdep for nested ATRs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Update overflow helpers to ease refactoring of on-stack flex array
instances (Gustavo A. R. Silva, Kees Cook)
- lkdtm: Use SLAB_NO_MERGE instead of constructors (Harry Yoo)
- Simplify CONFIG_CC_HAS_COUNTED_BY (Jan Hendrik Farr)
- Disable u64 usercopy KUnit test on 32-bit SPARC (Thomas Weißschuh)
- Add missed designated initializers now exposed by fixed randstruct
(Nathan Chancellor, Kees Cook)
- Document compilers versions for __builtin_dynamic_object_size
- Remove ARM_SSP_PER_TASK GCC plugin
- Fix GCC plugin randstruct, add selftests, and restore COMPILE_TEST
builds
- Kbuild: induce full rebuilds when dependencies change with GCC
plugins, the Clang sanitizer .scl file, or the randstruct seed.
- Kbuild: Switch from -Wvla to -Wvla-larger-than=1
- Correct several __nonstring uses for -Wunterminated-string-initialization
* tag 'hardening-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
Revert "hardening: Disable GCC randstruct for COMPILE_TEST"
lib/tests: randstruct: Add deep function pointer layout test
lib/tests: Add randstruct KUnit test
randstruct: gcc-plugin: Remove bogus void member
net: qede: Initialize qede_ll_ops with designated initializer
scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops
md/bcache: Mark __nonstring look-up table
integer-wrap: Force full rebuild when .scl file changes
randstruct: Force full rebuild when seed changes
gcc-plugins: Force full rebuild when plugins change
kbuild: Switch from -Wvla to -Wvla-larger-than=1
hardening: simplify CONFIG_CC_HAS_COUNTED_BY
overflow: Fix direct struct member initialization in _DEFINE_FLEX()
kunit/overflow: Add tests for STACK_FLEX_ARRAY_SIZE() helper
overflow: Add STACK_FLEX_ARRAY_SIZE() helper
input/joystick: magellan: Mark __nonstring look-up table const
watchdog: exar: Shorten identity name to fit correctly
mod_devicetable: Enlarge the maximum platform_device_id name length
overflow: Clarify expectations for getting DEFINE_FLEX variable sizes
compiler_types: Identify compiler versions for __builtin_dynamic_object_size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host updates for v6.16
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)
Misc changes:
- core: add support for Write Disable-aware SPD
|
|
'arm/smmu/bindings', 'fsl/pamu', 'mediatek', 'renesas/ipmmu', 's390', 'intel/vt-d', 'amd/amd-vi' and 'core' into next
|
|
Some I2C ATRs do not support dynamic remapping, only static mapping
of direct children.
Mappings will only be added or removed as a result of devices being
added or removed from a child bus.
The ATR pool will have to be big enough to accommodate all devices
expected to be added to the child buses.
Add a new flag that prevents old mappings to be replaced or new mappings
to be created in the alias finding code paths. That mens adding a flags
parameter to i2c_atr_new() and an i2c_atr_flags enum.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
During our test, it is found that a warning can be trigger in try_grab_folio
as follow:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1678 at mm/gup.c:147 try_grab_folio+0x106/0x130
Modules linked in:
CPU: 0 UID: 0 PID: 1678 Comm: syz.3.31 Not tainted 6.15.0-rc5 #163 PREEMPT(undef)
RIP: 0010:try_grab_folio+0x106/0x130
Call Trace:
<TASK>
follow_huge_pmd+0x240/0x8e0
follow_pmd_mask.constprop.0.isra.0+0x40b/0x5c0
follow_pud_mask.constprop.0.isra.0+0x14a/0x170
follow_page_mask+0x1c2/0x1f0
__get_user_pages+0x176/0x950
__gup_longterm_locked+0x15b/0x1060
? gup_fast+0x120/0x1f0
gup_fast_fallback+0x17e/0x230
get_user_pages_fast+0x5f/0x80
vmci_host_unlocked_ioctl+0x21c/0xf80
RIP: 0033:0x54d2cd
---[ end trace 0000000000000000 ]---
Digging into the source, context->notify_page may init by get_user_pages_fast
and can be seen in vmci_ctx_unset_notify which will try to put_page. However
get_user_pages_fast is not finished here and lead to following
try_grab_folio warning. The race condition is shown as follow:
cpu0 cpu1
vmci_host_do_set_notify
vmci_host_setup_notify
get_user_pages_fast(uva, 1, FOLL_WRITE, &context->notify_page);
lockless_pages_from_mm
gup_pgd_range
gup_huge_pmd // update &context->notify_page
vmci_host_do_set_notify
vmci_ctx_unset_notify
notify_page = context->notify_page;
if (notify_page)
put_page(notify_page); // page is freed
__gup_longterm_locked
__get_user_pages
follow_trans_huge_pmd
try_grab_folio // warn here
To slove this, use local variable page to make notify_page can be seen
after finish get_user_pages_fast.
Fixes: a1d88436d53a ("VMCI: Fix two UVA mapping bugs")
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/all/e91da589-ad57-3969-d979-879bbd10dddd@huawei.com/
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Link: https://lore.kernel.org/r/20250510033040.901582-1-mawupeng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit f88c0c72ffb0 ("mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf
and rx_buf type") changed the type of tx_buf from "void *" to "struct
vsc_tp_packet *" and added a cast to (u32 *) when passing it to
cpu_to_be32_array() and the same change was made for rx_buf.
This triggers the type-check warning in sparse:
vsc-tp.c:327:28: sparse: expected restricted __be32 [usertype] *dst
vsc-tp.c:327:28: sparse: got unsigned int [usertype] *
vsc-tp.c:343:42: sparse: expected restricted __be32 const [usertype] *src
vsc-tp.c:343:42: sparse: got unsigned int [usertype] *
Fix this by casting to (__be32 *) instead.
Note actually changing the type of the buffers to "be32 *" is not an option
this buffer does actually contain a "struct vsc_tp_packet" and is used
as such most of the time. vsc_tp_rom_xfer() re-uses the buffers as just
dumb arrays of 32 bit words to talk to the device before the firmware has
booted, to avoid needing to allocate a separate buffer.
Fixes: f88c0c72ffb0 ("mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf and rx_buf type")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505071634.kZ0I7Va6-lkp@intel.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250507090728.115910-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- Provide user register access over IOCTL.
Both register read and write are supported.
- APML interface does not provide a synchronization method. By defining,
a register access path, we use APML modules and library for
all APML transactions. Without having to use external tools such as
i2c-tools, which may cause race conditions.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-10-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- AMD provides custom protocol to read Machine Check Architecture(MCA)
registers over sideband. The information is accessed for range of
MCA registers by passing register address and thread ID to the protocol.
MCA register read command using the register address to access
Core::X86::Msr::MCG_CAP which determines the number of MCA banks.
Access is read-only
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-9-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- AMD provides custom protocol to read Processor feature
capabilities and configuration information through side band.
The information is accessed by providing CPUID Function,
extended function and thread ID to the protocol.
Undefined function returns 0.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-8-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The present sbrmi module only support reporting power via hwmon.
However, AMD data center range of processors support various
system management functionality using custom protocols defined in
Advanced Platform Management Link (APML) specification.
Register a miscdevice, which creates a device /dev/sbrmiX with an IOCTL
interface for the user space to invoke the APML Mailbox protocol, which
is already defined in sbrmi_mailbox_xfer().
The APML protocols depend on a set of RMI registers. Having an IOCTL
as a single entry point will help in providing synchronization among
these protocols as multiple transactions on RMI register set may
create race condition.
Support for other protocols will be added in subsequent patches.
APML mailbox protocol returns additional error codes written by
SMU firmware in the out-bound register 0x37. These errors include,
invalid core, message not supported over platform and
others. This additional error codes can be used to provide more
details to user space.
Open-sourced and widely used https://github.com/amd/esmi_oob_library
will continue to provide user-space programmable API.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-7-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- optimize the wait condition to indicate command completion
by replacing the do while loop with regmap subsystem API
regmap_read_poll_timeout()
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-6-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- regmap subsystem provides multiple benefits over direct smbus APIs
- subsystem adds another abstraction layer on top of struct i2c_client to
make it easy to read or write registers.
- The subsystem can be helpful in following cases
- Different types of bus (i2c/i3c), we have plans to support i3c.
- Different Register address size (1byte/2byte)
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-5-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- Move hwmon device sensor to misc as only power is reported through
hwmon sensor.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-4-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- This is done to utilize the protocol functionality into
other domains.
- Increase the scalability of the module with different bus(i2c/i3c)
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-3-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is done to support other functionality provided by the SBRMI, which
does not fit in the hwmon subsystem.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250428063034.2145566-2-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The patch adds PIO asynchronous wakeup support while PIO PCIe Endpoint
function is in D3 state. When such a wakeup event occurs, the PIO
asserts a PIO_WAKE signal, which in turn triggers PCIe Wake signaling.
This wake request should trigger the PCIe Host to take the PIO PCIe
Endpoint function into the D0 device state.
The device supports up to 96 PIOs distributed across three GPIO banks.
During suspend and resume, the driver checks the status of each GPIO bank
to determine if any GPIOs with wake masking enabled have triggered an
event. Upon resume, PIOxx_STATUS register must be cleared by software
explicitly to enable the detection of the next transition.
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250513091557.3660-3-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
later devices
Systems that issue PCIe hot reset requests during a suspend/resume
cycle cause PCI1XXXX device revisions prior to C0 to get its GPIO
configuration registers reset to hardware default values. This results
in device inaccessibility and GPIO read/write failure. Starting with
Revision C0, support was added in the device hardware (via the Hot
Reset Disable Bit) to allow resetting only the PCIe interface and its
associated logic, but preserving the GPIO configurations during a hot
reset. This patch enables the hot reset disable feature during suspend/
resume for C0 and later revisions of the device.
mchp_pci1xxxx_gpio is an auxiliary child of mchp_pci1xxxx_gp and does
not have access to system register address space for reading the device
revision. Hence, the device revision is retrieved directly from PCIe
config space.
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250513091557.3660-2-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The lis3lv02d driver does not create a platform device anymore. It was
recently changed to use a faux device instead. Therefore the sysfs path
has changed from /sys/devices/platform/lis3lv02d to
/sys/devices/faux/lis3lv02d.
Fixes: 3b18ccb5472b ("misc: lis3lv02d: convert to use faux_device")
Signed-off-by: Roxana Nicolescu <nicolescu.roxana@protonmail.com>
Link: https://lore.kernel.org/r/20250506110002.36477-1-nicolescu.roxana@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
irq_domain_add_simple() is going away as being obsolete now. Switch to
the preferred irq_domain_create_simple(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-27-jirislaby@kernel.org
|
|
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct mei_ext_hdr *", but the returned type will
be "struct mei_ext_hdr_gsc_f2h *", which is a larger allocation size.
This is by design as struct mei_ext_hdr_gsc_f2h contains struct
mei_ext_hdr as its first member. Cast the allocation to the match the
assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Acked-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250426061815.work.435-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'echo' is a software echo canceller for telco use, however
it's not used in the kernel at all.
Remove it.
It was moved from staging in 2014 by
commit Fixes: 6e2055a9e56e ("staging: echo: move to drivers/misc/")
Some discussion on lkml:
https://lore.kernel.org/all/Z7tZhYET41DAoHVf@gallifrey/
with Arnd and Harald, led to the 'dahdi' package which is part of
Asterisk:
https://gitea.osmocom.org/retronetworking/dahdi-linux
which can build with the 'echo' module, but is normally configured
with out it.
Dahdi is large, old, only lightly maintained and with a big API, so
there's no hope now of ever merging it into the main kernel tree.
Debian do package Dahdi, and in their package they actually include
a copy of the 'echo' module rather than using the kernel from the
upstream kernel. So even in the few cases where it is packaged
and built, the kernel copy isn't used.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250427224022.113678-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 45f0de4f8dc385cd8959d884cd89b3b84c76b7f9.
It breaks the build on many systems, so revert it for now.
Link: https://lore.kernel.org/r/20250501164501.0fc0ab68@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use SLAB_NO_MERGE flag to prevent merging instead of providing an
empty constructor. Using an empty constructor in this manner is an abuse
of slab interface.
The SLAB_NO_MERGE flag should be used with caution, but in this case,
it is acceptable as the cache is intended soley for debugging purposes.
No functional changes intended.
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://lore.kernel.org/r/20250318014533.1624852-1-harry.yoo@oracle.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
None of the drivers implement anything for IOMMU_DEV_FEAT_IOPF anymore,
remove it to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20250418080130.1844424-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
None of the drivers implement anything here anymore, remove the dead code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20250418080130.1844424-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- When releasing a start-aligned resource, e.g., a bridge window, save
start/end/flags for the next assignment attempt; fixes a v6.15-rc1
regression (Ilpo Järvinen)
- Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl
selftest v6.15-rc1 regression (Ilpo Järvinen)
- Add Manivannan Sadhasivam as maintainer of native host bridge and
endpoint drivers (Manivannan Sadhasivam)
- In endpoint test driver, defer IRQ allocation from .probe() until
ioctl() to fix a regression on platforms where the Vendor/Device ID
match doesn't include driver_data (Niklas Cassel)
* tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)
MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer
selftests/pcie_bwctrl: Fix test progs list
PCI: Restore assigned resources fully after release
|
|
Add test cases for static and dynamic minor number allocation and
deallocation.
While at it, improve description and test suite name.
Some of the cases include:
- that static and dynamic allocation reserved the expected minors.
- that registering duplicate minors or duplicate names will fail.
- that failing to create a sysfs file (due to duplicate names) will
deallocate the dynamic minor correctly.
- that dynamic allocation does not allocate a minor number in the static
range.
- that there are no collisions when mixing dynamic and static allocations.
- that opening devices with various minor device numbers work.
- that registering a static number in the dynamic range won't conflict with
a dynamic allocation.
This last test verifies the bug fixed by commit 6d04d2b554b1 ("misc:
misc_minor_alloc to use ida for all dynamic/misc dynamic minors") has not
regressed.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250423-misc-dynrange-v4-2-133b5ae4ca18@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cardreader returns -ENOMEM if a PCI region is currently in use
("requested") by another driver. The proper return code for this is
-EBUSY.
Replace -ENOMEM with -EBUSY.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417091532.26520-3-phasta@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cardreader enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_regions() into managed
mode, where it becomes a devres function.
The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.
Moreover, since both functions are already managed in this driver, the
calls to pci_release_regions() are unnecessary.
Remove the calls to pci_release_regions().
Replace the call to sometimes-managed pci_request_regions() with one to
the always-managed pcim_request_all_regions().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417091532.26520-2-phasta@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The last uses of rtsx_ms_power_off_card3v3() and
rtsx_sd_power_off_card3v3() were removed by 2019's
commit bede03a579b3 ("misc: rtsx: Enable OCP for rts522a rts524a rts525a
rts5260")
The last use of rtsx_pci_transfer_data() was removed by 2024's
commit d0f459259c13 ("memstick: rtsx_pci_ms: Remove Realtek PCI memstick
driver")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250420145739.58337-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit a402006d48a9 ("misc: pci_endpoint_test: Remove global 'irq_type'
and 'no_msi'") changed so that the default IRQ vector requested by
pci_endpoint_test_probe() was no longer the module param 'irq_type', but
instead test->irq_type. test->irq_type is by default IRQ_TYPE_UNDEFINED
(until someone calls ioctl(PCITEST_SET_IRQTYPE)).
However, the commit also changed so that after initializing test->irq_type
to IRQ_TYPE_UNDEFINED, it also overrides it with driver_data->irq_type, if
the PCI device and vendor ID provides driver_data.
This causes a regression for PCI device and vendor IDs that do not provide
driver_data, and the host side pci_endpoint_test_driver driver failed to
probe on such platforms:
pci-endpoint-test 0001:01:00.0: Invalid IRQ type selected
pci-endpoint-test 0001:01:00.0: probe with driver pci-endpoint-test failed with error -22
Considering that the pci endpoint selftests and the old pcitest.sh always
call ioctl(PCITEST_SET_IRQTYPE) before performing any test that requires
IRQs, fix the regression by removing the allocation of IRQs in
pci_endpoint_test_probe(). The IRQ allocation will occur when
ioctl(PCITEST_SET_IRQTYPE) is called.
A positive side effect of this is that even if the endpoint controller has
issues with IRQs, the user can do still do all the tests/ioctls() that do
not require working IRQs, e.g. PCITEST_BAR and PCITEST_BARS.
This also means that we can remove the now unused irq_type from
driver_data. The irq_type will always be the one configured by the user
using ioctl(PCITEST_SET_IRQTYPE). (A user that does not know, or care
which irq_type that is used, can use PCITEST_IRQ_TYPE_AUTO. This has
superseded the need for a default irq_type in driver_data.)
[bhelgaas: add probe failure details]
Fixes: a402006d48a9c ("misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250416142825.336554-2-cassel@kernel.org
|
|
The TI FPC202 dual port controller serves as a low-speed signal aggregator
for common port types such as SFP, QSFP, Mini-SAS HD, and others.
It aggregates GPIO and I2C signals across two downstream ports, acting as
both a GPIO controller and an I2C address translator for up to two logical
devices per port.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
vsc_tp.tx_buf and vsc_tp.rx_buf point to a struct vsc_tp_packet, use
the correct type instead of "void *" and use sizeof(*ptr) when allocating
memory for these buffers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250318141203.94342-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gcc 15 honors the __counted_by(len) attribute on vsc_tp_packet.buf[]
and the vsc-tp.c code is using this in a wrong way. len does not contain
the available size in the buffer, it contains the actual packet length
*without* the crc. So as soon as vsc_tp_xfer() tries to add the crc to
buf[] the fortify-panic handler gets triggered:
[ 80.842193] memcpy: detected buffer overflow: 4 byte write of buffer size 0
[ 80.842243] WARNING: CPU: 4 PID: 272 at lib/string_helpers.c:1032 __fortify_report+0x45/0x50
...
[ 80.843175] __fortify_panic+0x9/0xb
[ 80.843186] vsc_tp_xfer.cold+0x67/0x67 [mei_vsc_hw]
[ 80.843210] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
[ 80.843229] ? lockdep_hardirqs_on+0x7c/0x110
[ 80.843250] mei_vsc_hw_start+0x98/0x120 [mei_vsc]
[ 80.843270] mei_reset+0x11d/0x420 [mei]
The easiest fix would be to just drop the counted-by but with the exception
of the ack buffer in vsc_tp_xfer_helper() which only contains enough room
for the packet-header, all other uses of vsc_tp_packet always use a buffer
of VSC_TP_MAX_XFER_SIZE bytes for the packet.
Instead of just dropping the counted-by, split the vsc_tp_packet struct
definition into a header and a full-packet definition and use a fixed
size buf[] in the packet definition, this way fortify-source buffer
overrun checking still works when enabled.
Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device")
Cc: stable@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250318141203.94342-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Under irq_ack, pci1xxxx_assign_bit reads the current interrupt status,
modifies and writes the entire value back. Since, the IRQ status bit
gets cleared on writing back, the better approach is to directly write
the bitmask to the register in order to preserve the value.
Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250313170856.20868-3-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Resolve kernel panic while accessing IRQ handler associated with the
generated IRQ. This is done by acquiring the spinlock and storing the
current interrupt state before handling the interrupt request using
generic_handle_irq.
A previous fix patch was submitted where 'generic_handle_irq' was
replaced with 'handle_nested_irq'. However, this change also causes
the kernel panic where after determining which GPIO triggered the
interrupt and attempting to call handle_nested_irq with the mapped
IRQ number, leads to a failure in locating the registered handler.
Fixes: 194f9f94a516 ("misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250313170856.20868-2-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Panther Lake H device id.
Cc: stable <stable@kernel.org>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250408130005.1358140-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250408-gpiochip-set-rv-misc-v1-1-eb6345aea5cd@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
platform
This patch introduces improvements to the signal handling processes on
the SVID/SSID 1028:0CE1 platform. By optimizing signal handling processes
we aim to deliver a more stable and reliable user experience.
The enhancements ensure robust connectivity and enhance signal process
performance. We have conducted extensive testing to ensure these
modifications result in noticeable improvements without impacting
existing functionalities.
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20250314094013.663223-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the custom directory.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250318085727.20748-2-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following warning by removing unused flex-array member
`data` in `struct bcm_vk_peer_log`:
drivers/misc/bcm-vk/bcm_vk.h:415:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/Z9Nd4AmgrQDiK1Gn@kspp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The returned value, pfsm->miscdev.name, from devm_kasprintf()
could be NULL.
A pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b02
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250311010511.1028269-1-chenyuan0y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the fastrpc_rpmsg_probe function, the exit path labels are not
intuitive and do not clearly indicate the purpose of the goto
statements. Rename goto labels to make it more intuitive and to
align with labels of other functions.
Signed-off-by: Anandu Krishnan E <quic_anane@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250310085417.25559-1-quic_anane@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Remove the IBM CAPI (cxl) driver
Thanks to Andrew Donnellan.
* tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
docs: Fix references to IBM CAPI (cxl) removal version
cxl: Remove driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
|
|
This merges in the removal of the IBM CAPI "cxl" driver.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c-core updates (collected by Wolfram):
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi):
Refactoring and cleanups:
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements:
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features:
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support:
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers:
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz):
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros"
* tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
dt-bindings: i2c: snps,designware-i2c: describe Renesas RZ/N1D variant
irqdomain: i2c: Switch to irq_find_mapping()
i2c: iproc: Refactor prototype and remove redundant error checks
i2c: qcom-geni: Update i2c frequency table to match hardware guidance
i2c: mlxbf: Use readl_poll_timeout_atomic() for polling
i2c: pasemi: Add registers bits and switch to BIT()
i2c: k1: Initialize variable before use
i2c: spacemit: add support for SpacemiT K1 SoC
dt-bindings: i2c: spacemit: add support for K1 SoC
i2c: omap: Add support for setting mux
dt-bindings: i2c: omap: Add mux-states property
i2c: octeon: remove 10-bit addressing support
i2c: octeon: fix return commenting
i2c: i801: Use MMIO if available
i2c: i801: Switch to iomapped register access
i2c: i801: Improve too small kill wait time in i801_check_post
i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code
i2c: i801: Cosmetic improvements
i2c: cadence: Move reset_control_assert after pm_runtime_set_suspended in probe error path
i2c: cadence: Simplify using devm_clk_get_enabled()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Enable Configuration RRS SV, which makes device readiness visible,
early instead of during child bus scanning (Bjorn Helgaas)
- Log debug messages about reset methods being used (Bjorn Helgaas)
- Avoid reset when it has been disabled via sysfs (Nishanth
Aravamudan)
- Add common pci-ep-bus.yaml schema for exporting several peripherals
of a single PCI function via devicetree (Andrea della Porta)
- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have
several features that require multiple drivers (Herve Codina)
Resource management:
- Enlarge devres table[] to accommodate bridge windows, ROM, IOV
BARs, etc., and validate BAR index in devres interfaces (Philipp
Stanner)
- Fix typo that repeatedly distributed resources to a bridge instead
of iterating over subordinate bridges, which resulted in too little
space to assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV
BARs, to avoid failures when removing and re-adding devices (Ilpo
Järvinen)
- Allow drivers to enable devices even if we haven't assigned
optional IOV resources to them (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce
failures if we can't allocate them (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay
Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults
in some cases, which broke vfio-pci lazy mapping on first access
(Niklas Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
was disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices
(Niklas Schnelle)
ASPM:
- Delay pcie_link_state deallocation to avoid dangling pointers that
cause invalid references during hot-unplug (Daniel Stodden)
Power management:
- Allow PCI bridges to go to D3Hot when suspending on all non-x86
systems (Manivannan Sadhasivam)
Power control:
- Create pwrctrl devices in pci_scan_device() to make it more
symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
for PCI bridges possible (Manivannan Sadhasivam)
- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
can still access devices after pci_stop_dev() (Manivannan
Sadhasivam)
- If there's a pwrctrl device for a PCI device, skip scanning it
because the pwrctrl core will rescan the bus after the device is
powered on (Manivannan Sadhasivam)
- Add a pwrctrl driver for PCI slots based on voltage regulators
described via devicetree (Manivannan Sadhasivam)
Bandwidth control:
- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)
- Avoid a NULL pointer dereference when we run out of bus numbers to
assign for a bridge secondary bus (Lukas Wunner)
Hotplug:
- Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
NULL pointer checks (Lukas Wunner)
- Drop shpchp module init/exit logging, replace shpchp dbg() with
ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
(Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused cpcihp .get_power(), .set_power() function pointers
(Guilherme Giacomo Simoes)
- Disable hotplug interrupts in portdrv only when pciehp is not
enabled to avoid issuing two hotplug commands too close together
(Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed
to address a deadlock when resuming after a device was removed
during system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode
(Ilpo Järvinen)
Virtualization:
- Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
Dave)
DOE:
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
Endpoint framework:
- Convert PCI device data so pci-epf-test works correctly on
big-endian endpoint systems (Niklas Cassel)
- Add BAR_RESIZABLE type to endpoint framework and add DWC core
support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
Cassel)
- Fix pci-epf-test double free that causes an oops if the host
reboots and PERST# deassertion restarts endpoint BAR allocation
(Christian Bruel)
- Fix endpoint BAR testing so tests can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Widen endpoint test BAR size variable to accommodate BARs larger
than INT_MAX (Niklas Cassel)
- Remove unused tools 'pci' build target left over after moving tests
to tools/testing/selftests/pci_endpoint (Jianfeng Liu)
Altera PCIe controller driver:
- Add DT binding and driver support for Agilex family (P-Tile,
F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)
AMD MDB PCIe controller driver:
- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)
Broadcom STB PCIe controller driver:
- Add BCM2712 MSI-X DT binding and interrupt controller drivers and
add softdep on irq_bcm2712_mip driver to ensure that it is loaded
first (Stanimir Varbanov)
- Expand inbound window map to 64GB so it can accommodate BCM2712
(Stanimir Varbanov)
- Add BCM2712 support and DT updates (Stanimir Varbanov)
- Apply link speed restriction before bringing link up, not after
(Jim Quinlan)
- Update Max Link Speed in Link Capabilities via the internal
writable register, not the read-only config register (Jim Quinlan)
- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)
- Disable regulators only when removing the bus immediately below a
Root Port because we don't support regulators deeper in the
hierarchy (Jim Quinlan)
- Make const read-only arrays static (Colin Ian King)
Cadence PCIe endpoint driver:
- Correct MSG TLP generation so endpoints can generate INTx messages
(Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)
- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
ATU input address (using parent_bus_offset) from devicetree (Frank
Li)
Freescale Layerscape PCIe controller driver:
- Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
unnecessary 'status' from example (Krzysztof Kozlowski)
- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)
HiSilicon STB PCIe controller driver:
- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)
Intel Gateway PCIe controller driver:
- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)
Intel VMD host bridge driver:
- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where
spinlock_t becomes a sleepable lock, to avoid calling a sleeping
function from invalid context (Ryo Takakura)
MediaTek PCIe Gen3 controller driver:
- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
Bianconi)
- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
program host bridge memory aperture to this syscon node (Lorenzo
Bianconi)
Qualcomm PCIe controller driver:
- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)
- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)
- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)
- Make DT iommu property required for SA8775P and prohibited for
SDX55 (Dmitry Baryshkov)
- Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)
- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)
- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)
Synopsys DesignWare PCIe controller driver:
- Add debugfs-based Silicon Debug, Error Injection, Statistical
Counter support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
Zhang)
- Add Rockchip support for DWC debugfs features (Niklas Cassel)
- Add dw_pcie_parent_bus_offset() to look up the parent bus address
of a specified 'reg' property and return the offset from the CPU
physical address (Frank Li)
- Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
via 'reg[config]' for host controllers and 'reg[addr_space]' for
endpoint controllers (Frank Li)
- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
of .cpu_addr_fixup() when programming ATU (Frank Li)
TI J721E PCIe driver:
- Correct the 'link down' interrupt bit for J784S4 (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
alignment requirement from 1MB to 64KB (Niklas Cassel)
Xilinx Versal CPM PCIe controller driver:
- Free IRQ domain in probe error path to avoid leaking it
(Thippeswamy Havalige)
- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)
- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)
Miscellaneous:
- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)
- Use for_each_available_child_of_node_scoped() to simplify apple,
kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"
* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: brcmstb: Make const read-only arrays static
...
|
|
If execute_location()'s memcpy of do_nothing() gets inlined and unrolled
by the compiler, it copies one word at a time:
mov 0x0(%rip),%rax R_X86_64_PC32 .text+0x1374
mov %rax,0x38(%rbx)
mov 0x0(%rip),%rax R_X86_64_PC32 .text+0x136c
mov %rax,0x30(%rbx)
...
Those .text references point to the middle of the function, causing
objtool to complain about their lack of ENDBR.
Prevent that by resolving the function pointer at runtime rather than
build time. This fixes the following warning:
drivers/misc/lkdtm/lkdtm.o: warning: objtool: execute_location+0x23: relocation to !ENDBR: .text+0x1378
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/30b9abffbddeb43c4f6320b1270fa9b4d74c54ed.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503191453.uFfxQy5R-lkp@intel.com/
|
|
- Move struct dwc_pcie_vsec_id to include/linux/pcie-dwc.h, where it can be
shared by debugfs, perf, sysfs, etc (Manivannan Sadhasivam)
- Add dw_pcie_find_vsec_capability() to locate Vendor Specific Extended
Capabilities (Shradha Todi)
- Add debugfs-based Silicon Debug, Error Injection, Statistical Counter
support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang)
- Add Rockchip Vendor ID and Vendor Specific ID of RAS DES Capability so
the DWC debugfs features work for Rockchip as well (Niklas Cassel)
* pci/controller/dwc:
PCI: dw-rockchip: Hide broken ATS capability for RK3588 running in EP mode
PCI: dwc: ep: Add dw_pcie_ep_hide_ext_capability()
PCI: dwc: ep: Return -ENOMEM for allocation failures
PCI: dwc: Add Rockchip to the RAS DES allowed vendor list
PCI: Add Rockchip Vendor ID
PCI: dwc: Add debugfs property to provide LTSSM status of the PCIe link
PCI: dwc: Add debugfs based Statistical Counter support for DWC
PCI: dwc: Add debugfs based Error Injection support for DWC
PCI: dwc: Add debugfs based Silicon Debug support for DWC
PCI: dwc: Add helper to find the Vendor Specific Extended Capability (VSEC)
perf/dwc_pcie: Move common DWC struct definitions to 'pcie-dwc.h'
|
|
For PCITEST_MSI we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSI, since we want to test if MSI works.
For PCITEST_MSIX we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSIX, since we want to test if MSI works.
For PCITEST_LEGACY_IRQ we really want to set PCITEST_SET_IRQTYPE
explicitly to PCITEST_IRQ_TYPE_INTX, since we want to test if INTx
works.
However, for PCITEST_WRITE, PCITEST_READ, PCITEST_COPY, we really don't
care which IRQ type that is used, we just want to use a IRQ type that is
supported by the EPC.
The old behavior was to always use MSI for PCITEST_WRITE, PCITEST_READ,
PCITEST_COPY, was to always set IRQ type to MSI before doing the actual
test, however, there are EPC drivers that do not support MSI.
Add a new PCITEST_IRQ_TYPE_AUTO, that will use the CAPS register to see
which IRQ types the endpoint supports, and use one of the supported IRQ
types.
For backwards compatibility, if the endpoint does not expose any supported
IRQ type in the CAPS register, simply fallback to using MSI, as it was
unconditionally done before.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-16-cassel@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host updates for v6.15
Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Remove the cxl driver that provides support for the IBM Coherent
Accelerator Processor Interface. Revert or clean up associated code in
arch/powerpc that is no longer necessary.
cxl has received minimal maintenance for several years, and is not
supported on the Power10 processor. We aren't aware of any users who are
likely to be using recent kernels.
Thanks to Mikey Neuling, Ian Munsie, Daniel Axtens, Frederic Barrat,
Christophe Lombard, Philippe Bergheaud, Vaibhav Jain and Alastair
D'Silva for their work on this driver over the years.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20250219070007.177725-2-ajd@linux.ibm.com
|
|
Use the IRQ_TYPE_* defines from the UAPI header rather than duplicating
these defines in the driver itself.
No functional change.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-11-cassel@kernel.org
|
|
The pci_endpoint_test_request_irq() and pci_endpoint_test_release_irq()
are called repeatedly by the users through pci_endpoint_test_set_irq().
So using the managed version of IRQ functions within these functions
has no effect.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225110252.28866-7-hayashi.kunihiko@socionext.com
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
