| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add watchdog support for:
- Renesas WWDT
- AST2700 platform
- MediaTek MT8189 SoC
- Loongson-2k0300 watchdog
- Qualcomm Kaanapali watchdog
- RK3506 compatible
- Airoha AN7583 SoC
- DT Schema conversions:
- lantiq,wdt
- TI OMAP
- marvell,orion-wdt
- Several other fixes and improvements
* tag 'linux-watchdog-6.19-rc1' of git://www.linux-watchdog.org/linux-watchdog: (30 commits)
watchdog: starfive: Fix resource leak in probe error path
dt-bindings: watchdog: airoha: Add support for Airoha AN7583 SoC
dt-bindings: watchdog: lantiq,wdt: convert bindings to dtschema
dt-bindings: watchdog: Add RK3506 compatible
dt-bindings: watchdog: Document Qualcomm Kaanapali watchdog
watchdog: wdat_wdt: Fix ACPI table leak in probe function
watchdog: loongson1: Add Loongson-2k0300 watchdog support
dt-bindings: watchdog: loongson,ls1x-wdt: Add ls2k0300-wdt compatible
watchdog: loongson1: Drop CONFIG_OF
watchdog: loongson1: Simplify ls1x_wdt_probe code
watchdog: loongson1: Add missing MODULE_PARM_DESC
watchdog/diag288: Fix module comment typos
dt-bindings: watchdog: Support MediaTek MT8189 wdt
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT8189 SoC
dt-bindings: mfd: rohm,bd96801-pmic: Correct timeout-sec length and reference watchdog schema
dt-bindings: watchdog: Allow node names named 'pmic'
dt-bindings: watchdog: Restrict timeout-sec to one number
watchdog: renesas_wwdt: add driver
dt-bindings: watchdog: Add Renesas WWDT
dt-bindings: watchdog: Convert marvell,orion-wdt to DT schema
...
|
|
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel message
catalog" from 2008 [1] which never made it upstream.
The macro was added to s390 code to allow for an out-of-tree patch which
used this to generate unique message ids. Also this out-of-tree doesn't
exist anymore.
Remove the macro in order to get rid of a pointless indirection.
[1] https://lwn.net/Articles/292650/
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
If pm_runtime_put_sync() fails after watchdog_register_device()
succeeds, the probe function jumps to err_exit without
unregistering the watchdog device. This leaves the watchdog
registered in the subsystem while the driver fails to load,
resulting in a resource leak.
Add a new error label err_unregister_wdt to properly unregister
the watchdog device.
Fixes: 8bc22a2f1bf0 ("watchdog: starfive: Check pm_runtime_enabled() before decrementing usage counter")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
wdat_wdt_probe() calls acpi_get_table() to obtain the WDAT ACPI table but
never calls acpi_put_table() on any paths. This causes a permanent ACPI
table memory leak.
Add a single cleanup path which calls acpi_put_table() to ensure
the ACPI table is always released.
Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog")
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
According to the manual, the Loongson-2K0300 watchdog is similar to the
Loongson-1, except for some register offsets and inconsistent register
bit definitions. Separate definitions via driver_data suffice.
Co-developed-by: Xiaochuang Mao <maoxiaochuan@loongson.cn>
Signed-off-by: Xiaochuang Mao <maoxiaochuan@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The general recommendation is to not use of_match_ptr() or CONFIG_OF
ifdef.
Drop them.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Remove meaningless output to simplify ls1x_wdt_probe().
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add documentation for module_param so that they're visible with
modinfo command.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Correct spelling and capitalizaion in the header comment so the
documentation reads cleanly.
Signed-off-by: Zoe Gates <zoe@zeocities.dev>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This driver adds support for the Renesas Window Watchdog Timer (WWDT).
Because it can only be setup once after boot and we cannot know if this
already happened in early boot stages, it is mandated that the firmware
configures the watchdog. Linux then adapts according to the given
setup. Note that this watchdog only reports an overflow to the Error
Control Module (ECM) and does not reset the SoC on its own.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add AST2700 platform support to the ASPEED watchdog driver. This includes
a new per-platform configuration with SCU reset status register at
SCU1_070 and support for 5 reset mask registers.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Starting from the AST2600 platform, the SoC design has become more
complex, with an increased number of reset mask registers.
To support this, introduce a new field 'num_reset_masks' in the
'aspeed_wdt_config' structure to specify the number of reset mask
registers per platform. This change removes the need for hardcoded
platform-specific logic and improves scalability for future SoCs.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The VIA watchdog driver uses allocate_resource() to reserve a MMIO
region for the watchdog control register. However, the allocated
resource was not given a name, which causes the kernel resource tree
to contain an entry marked as "<BAD>" under /proc/iomem on x86
platforms.
During boot, this unnamed resource can lead to a critical hang because
subsequent resource lookups and conflict checks fail to handle the
invalid entry properly.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- renesas,wdt: Add support for RZ/T2H and RZ/N2H
- Add SMARC-sAM67 support
- Several small fixes and improvements
* tag 'linux-watchdog-6.18-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog/hpwdt New maintianer
dt-bindings: watchdog: add SMARC-sAM67 support
watchdog: mpc8xxx_wdt: Reload the watchdog timer when enabling the watchdog
watchdog: visconti: don't print superfluous errors
watchdog: rzv2h_wdt: don't print superfluous errors
watchdog: rzg2l_wdt: don't print superfluous errors
watchdog: s3c2410_wdt: exynosautov9: Enable supported features
watchdog: s3c2410_wdt: exynosautov920: Enable QUIRK_HAS_32BIT_CNT
watchdog: s3c2410_wdt: Increase max timeout value of watchdog
watchdog: s3c2410_wdt: Fix max_timeout being calculated larger
watchdog: s3c2410_wdt: Replace hardcoded values with macro definitions
watchdog: rzv2h: Improve error strings and add newlines
watchdog: rzv2h: Add support for RZ/T2H
watchdog: rzv2h: Add support for configurable count clock source
watchdog: rzv2h: Make "oscclk" and reset controller optional
watchdog: rzv2h: Obtain clock-divider and timeout values from OF match data
dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H
watchdog: intel_oc_wdt: Do not try to write into const memory
|
|
This driver supports Watchdog timer functionality for NCT6694 MFD
device based on USB interface.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-6-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
When the watchdog gets enabled with this driver, it leaves enough time
for the core watchdog subsystem to start pinging it. But when the
watchdog is already started by hardware or by the boot loader, little
time remains before it fires and it happens that the core watchdog
subsystem doesn't have time to start pinging it.
Until commit 19ce9490aa84 ("watchdog: mpc8xxx: use the core worker
function") pinging was managed by the driver itself and the watchdog
was immediately pinged by setting the timer expiry to 0.
So restore similar behaviour by pinging it when enabling it so that
if it was already enabled the watchdog timer counter is reloaded.
Fixes: 19ce9490aa84 ("watchdog: mpc8xxx: use the core worker function")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The watchdog core will handle error messages already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The watchdog core will handle error messages already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The watchdog core will handle error messages already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Enable supported features for ExynosAutov9 SoC.
- QUIRK_HAS_DBGACK_BIT
- QUIRK_HAS_32BIT_CNT
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Enable QUIRK_HAS_32BIT_CNT to ExynosAutov920 SoC which has 32-bit WTCNT.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Increase max_timeout value from 55s to 3665038s (1018h 3min 58s) with
38400000 frequency system if the system has 32-bit WTCNT register.
cat /sys/class/watchdog/watchdog0/max_timeout
3665038
[ 0.330082] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: count=1099511400000, timeout=3665038, freq=300000
[ 0.330087] s3c2410-wdt 10060000.watchdog_cl0: Heartbeat: timeout=3665038, divisor=256, count=1099511400000 (fffffc87)
[ 0.330127] s3c2410-wdt 10060000.watchdog_cl0: starting watchdog timer
[ 0.330134] s3c2410-wdt 10060000.watchdog_cl0: Starting watchdog: count=0xfffffc87, wtcon=0001ff39
[ 0.330319] s3c2410-wdt 10060000.watchdog_cl0: watchdog active, reset enabled, irq disabled
If the system has a 32-bit WTCNT, add QUIRK_HAS_32BIT_CNT to its quirk flags,
and it will operate with a 32-bit counter. If not, it will operate with a 16-bit
counter like in the previous version.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Fix the issue of max_timeout being calculated larger than actual value.
The calculation result of freq / (S3C2410_WTCON_PRESCALE_MAX + 1) /
S3C2410_WTCON_MAXDIV is smaller than the actual value because the remainder
is discarded during the calculation process. This leads to a larger
calculated value for max_timeout compared to the actual settable value.
To resolve this issue, the order of calculations in the computation process
has been adjusted.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Modify the code to utilize macro-defined values instead of hardcoded
values. The value 0x100 in the s3c2410wdt_set_heartbeat function represents
S3C2410_WTCON_PRESCALE_MAX + 1, but it is hardcoded, making its meaning
difficult to understand and reducing code readability.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Update rzv2h_wdt_probe() to provide clearer error strings when retrieving
the pclk, oscclk, and reset controller, and append missing newline
characters to dev_err_probe() and dev_warn() calls for proper log
formatting.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add support for the RZ/T2H watchdog timer. The RZ/T2H requires control of
the watchdog counter using the WDT Debug Control Register (WDTDCR), which
allows explicitly stopping and starting the counter. This behavior differs
from RZ/V2H, which doesn't have WDTDCR, so the driver is extended to handle
this requirement.
To support this, a new `wdtdcr` flag is introduced in the `rzv2h_of_data`
structure. When set, the driver maps the WDTDCR register and uses it to
control the watchdog counter in the start, stop, and restart callbacks.
Additionally, the clock divisor and count source for RZ/T2H are defined
to match its hardware configuration.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add support for selecting the count clock source used by the watchdog
timer. The RZ/V2H(P) SoC uses the LOCO as the count source, whereas on
RZ/T2H and RZ/N2H SoCs, the count source is the peripheral clock (PCLKL).
Introduce a `count_source` field in the SoC-specific data structure and
refactor the clock rate selection logic accordingly. This prepares the
driver for supporting the RZ/T2H and RZ/N2H SoCs, which differ in their
watchdog clocking architecture from RZ/V2H(P).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Update the rzv2h_wdt driver to make the "oscclk" clock and reset
controller optional.
Use devm_clk_get_optional_prepared() to obtain the "oscclk" clock,
allowing the driver to work on platforms that do not provide this clock,
such as the RZ/T2H SoC.
Similarly, use devm_reset_control_get_optional_exclusive() to allow the
driver to function on platforms that lack a reset controller.
These changes are preparatory steps for supporting the RZ/T2H SoC, which
does not provide an "oscclk" clock or a reset controller.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Update the rzv2h_wdt driver to fetch clock configuration and timeout
parameters from device tree match data rather than relying on hardcoded
constants. Introduce a new structure rzv2h_of_data that encapsulates
minimum and maximum clock select values (cks_min and cks_max), clock
divider (cks_div), timeout cycle count (timeout_cycles), and the
timeout period select bits (tops). These values are provided through
the OF match table and retrieved via of_device_get_match_data() during
probe.
This change allows dynamic configuration of the watchdog timer for
different SoCs, such as the RZ/T2H, which require different settings.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The code tries to update the intel_oc_wdt_info data structure if the
watchdog is locked. That data structure is marked as const and can not
be written into. Copy it into struct intel_oc_wdt and modify it there
to fix the problem.
Reported-by: Petar Kulić <cooleech@gmail.com>
Cc: Diogo Ivo <diogo.ivo@siemens.com>
Fixes: 535d1784d8a9 ("watchdog: Add driver for Intel OC WDT")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Diogo Ivo <diogo.ivo@siemens.com>
Tested-by: Diogo Ivo <diogo.ivo@siemens.com>
Link: https://lore.kernel.org/linux-watchdog/20250818031838.3359-1-diogo.ivo@tecnico.ulisboa.pt/T/#t
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The MediaTek implementation of the sbsa_gwdt watchdog has a race
condition where a write to SBSA_GWDT_WRR is ignored if it occurs while
the hardware is processing a timeout refresh that asserts WS0.
Detect this based on the hardware implementer and adjust
wdd->min_hw_heartbeat_ms to avoid the race by forcing the keepalive ping
to be one second later.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250721230640.2244915-1-aplattner@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The Synopsys Watchdog driver sets the default timeout to 30 seconds,
but on some devices this is not a valid timeout. E.g. on RK3588 the
actual timeout being used is 44 seconds instead.
Once the watchdog is started the value is updated accordingly, but
it would be better to expose a sensible timeout to userspace without
the need to first start the watchdog.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250717-dw-wdt-fix-initial-timeout-v1-1-86dc864d48dd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Note that kernel.h is discouraged to be included as it's written
at the top of that file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250708133646.70384-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Note that kernel.h is discouraged to be included as it's written
at the top of that file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250708133646.70384-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Convert the Renesas WDT watchdog driver from SIMPLE_DEV_PM_OPS() to
DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr(). This lets us drop the
__maybe_unused annotations from its suspend and resume callbacks, and
reduces kernel size in case CONFIG_PM or CONFIG_PM_SLEEP is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/3d6d46ff56c908880a167ffb2a74c713060a1a57.1752088043.git.geert+renesas@glider.be
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The driver probes with the invalid timeout value when
'iTCO_wdt_set_timeout()' fails, as its return value is not checked. In
this case, when executing "wdctl", we may get:
Device: /dev/watchdog0
Timeout: 30 seconds
Timeleft: 613 seconds
The timeout value is the value of "heartbeat" or "WATCHDOG_TIMEOUT", and
the timeleft value is calculated from the register value we actually read
(0xffff) by masking with 0x3ff and converting ticks to seconds (* 6 / 10).
Add error handling to return the failure code if 'iTCO_wdt_set_timeout()'
fails, ensuring the driver probe fails and prevents invalid operation.
Signed-off-by: Ziyan Fu <fuzy5@lenovo.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250704073518.7838-1-13281011316@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
The error handling is a bit different. "memory-region" is optional, so
failed lookup is not an error. But then an error in
of_address_to_resource() is treated as an error. However, that
distinction is not really important. Either the region is available
and usable or it is not. So now, it is just
of_reserved_mem_region_to_resource() which is checked for an error.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250703183518.2075108-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The "rec->len" value comes from the firmware. We generally do
trust firmware, but it's always better to double check. If
the length value is too large it would lead to memory corruption
when we set "data[i] = ret;"
Fixes: 217209db0204 ("watchdog: ziirave_wdt: Add support to upload the firmware.")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/3b58b453f0faa8b968c90523f52c11908b56c346.1748463049.git.dan.carpenter@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add watchdog timer for the NXP S32 platform
- Add driver for Intel OC WDT
- Add exynos990-wdt
- Various other fixes and improvements
* tag 'linux-watchdog-6.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits)
watchdog: iTCO_wdt: Update the heartbeat value after clamping timeout
watchdog: Add driver for Intel OC WDT
watchdog: arm_smc_wdt: get wdt status through SMCWD_GET_TIMELEFT
watchdog: iTCO: Drop driver-internal locking
watchdog: apple: set max_hw_heartbeat_ms instead of max_timeout
watchdog: qcom: introduce the device data for IPQ5424 watchdog device
dt-bindings: watchdog: renesas,wdt: Document RZ/V2N (R9A09G056) support
watchdog: lenovo_se30_wdt: Fix possible devm_ioremap() NULL pointer dereference in lenovo_se30_wdt_probe()
watchdog: s3c2410_wdt: Add exynos990-wdt compatible data
dt-bindings: watchdog: samsung-wdt: Add exynos990-wdt compatible
dt-bindings: watchdog: Add rk3562 compatible
dt-bindings: watchdog: fsl,scu-wdt: Document imx8qm
watchdog: Add the Watchdog Timer for the NXP S32 platform
dt-bindings: watchdog: Add NXP Software Watchdog Timer
watchdog: Correct kerneldoc warnings
watchdog: stm32: Fix wakeup source leaks on device unbind
watchdog: Do not enable by default during compile testing
watchdog: cros-ec: Avoid -Wflex-array-member-not-at-end warning
watchdog: da9052_wdt: respect TWDMIN
watchdog: da9052_wdt: do not disable wdt during probe
...
|
|
When executing "modprobe iTCO_wdt heartbeat=700", the user-specified
'heartbeat' parameter exceeds the valid range, the driver clamps the
timeout to default 30s but fails to update the logged 'heartbeat' value,
resulting in misleading log output:
iTCO_wdt iTCO_wdt: timeout value out of range, using 30
iTCO_wdt iTCO_wdt: initialized. heartbeat=700 sec (nowayout=0)
After validating the range, update the 'heartbeat' value with the clamped
timeout value to ensure that log messages accurately reflect the actual
runtime parameters.
Signed-off-by: Ziyan Fu <fuzy5@lenovo.com>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Link: https://lore.kernel.org/r/20250429102533.11886-1-13281011316@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add a driver for the Intel Over-Clocking Watchdog found in Intel
Platform Controller (PCH) chipsets. This watchdog is controlled
via a simple single-register interface and would otherwise be
standard except for the presence of a LOCK bit that can only be
set once per power cycle, needing extra handling around it.
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250317-ivo-intel_oc_wdt-v3-1-32c396f4eefd@siemens.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The optional SMCWD_GET_TIMELEFT command can be used to detect if
the watchdog has already been started.
See the implementation in OP-TEE secure OS [1].
At probe time, check if the watchdog is already started and then
set WDOG_HW_RUNNING in the watchdog status. This will cause the
watchdog framework to ping the watchdog until a userspace watchdog
daemon takes over the control.
Link: https://github.com/OP-TEE/optee_os/commit/a7f2d4bd8632 [1]
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250520085952.210723-1-antonio.borneo@foss.st.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The locking code in the iTCO watchdog driver has been carried along from
before the watchdog core existed. The watchdog core protects calls into
drivers since commit f4e9c82f64b5 ("watchdog: Add Locking support"),
making driver-internal locking unnecessary. Drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Link: https://lore.kernel.org/r/20250517160936.3231017-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The hardware only supports timeouts slightly below 3mins, but by using
max_hw_heartbeat_ms we can let the kernel take care of supporting larger
timeouts than that requested from userspace.
Switching to max_hw_heartbeat_ms also means our set_timeout function now
needs to configure the hardware to the minimum of either the requested
timeout (in seconds) or the maximum supported by the user (in seconds).
Signed-off-by: Florian Klink <flokli@flokli.de>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Link: https://lore.kernel.org/r/20250506142621.11428-2-flokli@flokli.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
To retrieve the restart reason from IMEM, certain device specific data
like IMEM compatible to lookup, location of IMEM to read, etc should be
defined. To achieve that, introduce the separate device data for IPQ5424
and add the required details subsequently.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250502-wdt_reset_reason-v3-3-b2dc7ace38ca@oss.qualcomm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
dereference in lenovo_se30_wdt_probe()
devm_ioremap() returns NULL on error. Currently, lenovo_se30_wdt_probe()
does not check for this case, which results in a NULL pointer
dereference.
Add NULL check after devm_ioremap() to prevent this issue.
Fixes: c284153a2c55 ("watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250424071648.89016-1-bsdhenrymartin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The Exynos990 has two watchdog clusters - cl0 and cl2. Add new
driver data for these two clusters, making it possible to use the
watchdog timer on this SoC.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250420-wdt-resends-april-v1-2-f58639673959@mentallysanemainliners.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Update overflow helpers to ease refactoring of on-stack flex array
instances (Gustavo A. R. Silva, Kees Cook)
- lkdtm: Use SLAB_NO_MERGE instead of constructors (Harry Yoo)
- Simplify CONFIG_CC_HAS_COUNTED_BY (Jan Hendrik Farr)
- Disable u64 usercopy KUnit test on 32-bit SPARC (Thomas Weißschuh)
- Add missed designated initializers now exposed by fixed randstruct
(Nathan Chancellor, Kees Cook)
- Document compilers versions for __builtin_dynamic_object_size
- Remove ARM_SSP_PER_TASK GCC plugin
- Fix GCC plugin randstruct, add selftests, and restore COMPILE_TEST
builds
- Kbuild: induce full rebuilds when dependencies change with GCC
plugins, the Clang sanitizer .scl file, or the randstruct seed.
- Kbuild: Switch from -Wvla to -Wvla-larger-than=1
- Correct several __nonstring uses for -Wunterminated-string-initialization
* tag 'hardening-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
Revert "hardening: Disable GCC randstruct for COMPILE_TEST"
lib/tests: randstruct: Add deep function pointer layout test
lib/tests: Add randstruct KUnit test
randstruct: gcc-plugin: Remove bogus void member
net: qede: Initialize qede_ll_ops with designated initializer
scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops
md/bcache: Mark __nonstring look-up table
integer-wrap: Force full rebuild when .scl file changes
randstruct: Force full rebuild when seed changes
gcc-plugins: Force full rebuild when plugins change
kbuild: Switch from -Wvla to -Wvla-larger-than=1
hardening: simplify CONFIG_CC_HAS_COUNTED_BY
overflow: Fix direct struct member initialization in _DEFINE_FLEX()
kunit/overflow: Add tests for STACK_FLEX_ARRAY_SIZE() helper
overflow: Add STACK_FLEX_ARRAY_SIZE() helper
input/joystick: magellan: Mark __nonstring look-up table const
watchdog: exar: Shorten identity name to fit correctly
mod_devicetable: Enlarge the maximum platform_device_id name length
overflow: Clarify expectations for getting DEFINE_FLEX variable sizes
compiler_types: Identify compiler versions for __builtin_dynamic_object_size
...
|
|
The S32 platform has several Watchdog Timer available and tied with a
CPU. The SWT0 is the only one which directly asserts the reset line,
other SWT require an external setup to configure the reset behavior
which is not part of this change.
As a side note, in the NXP documentation, the s32g2 and s32g3
reference manuals refer the watchdog as the 'Software Timer Watchdog'
where the name can be misleading as it is actually a hardware
watchdog.
The maximum watchdog timeout value depends on the clock feeding the
SWT counter which is 32bits wide. On the s32g274-rb2, the clock has a
rate of 51MHz which result on 83 seconds maximum timeout.
The timeout can be specified via the device tree with the usual
existing bindings 'timeout-sec' or via the module param timeout.
The watchdog can be loaded with the 'nowayout' option, preventing the
watchdog to be stopped.
The watchdog can be started at boot time with the 'early-enable'
option, thus letting the watchdog framework to service the watchdog
counter.
The watchdog support the magic character to stop when the userspace
releases the device.
Cc: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Cc: Thomas Fossati <thomas.fossati@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Alexandru-Catalin Ionita <alexandru-catalin.ionita@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250410082616.1855860-3-daniel.lezcano@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Correct kerneldoc syntax or drop kerneldoc entirely for function
comments not being kerneldoc to fix warnings like:
pretimeout_noop.c:19: warning: Function parameter or struct member 'wdd' not described in 'pretimeout_noop'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250406203531.61322-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Device can be unbound or probe can fail, so driver must also release
memory for the wakeup source.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250406203531.61322-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Enabling the compile test should not cause automatic enabling of all
drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250404123941.362620-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for on-stack definitions of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/watchdog/cros_ec_wdt.c:29:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/Z-WG6_uhWsy_FCq3@kspp
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
We have to wait at least the minimium time for the watchdog window
(TWDMIN) before writings to the wdt register after the
watchdog is activated.
Otherwise the chip will assert TWD_ERROR and power down to reset mode.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-4-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
If the watchog is started by the bootloader, we do not want the watchdog
to be disabled.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-3-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Introduce the `timeout` module parameter and pass it to
watchdog_init_timeout(). If the parameter is not set or contains an
invalid value, fallback on the `timeout-secs` devicetree property value.
If none of the above is valid, go for the old default value.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-2-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add nowayout module parameter for not stopping the
watchdog when userspace application quits.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250326-da9052-fixes-v3-1-a38a560fef0e@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The static initializer for struct watchdog_info::identity is too long
and gets initialized without a trailing NUL byte. Since the length
of "identity" is part of UAPI and tied to ioctls, just shorten
the name of the device. Avoids the warning seen with GCC 15's
-Wunterminated-string-initialization option:
drivers/watchdog/exar_wdt.c:224:27: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
224 | .identity = "Exar/MaxLinear XR28V38x Watchdog",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 81126222bd3a ("watchdog: Exar/MaxLinear XR28V38x driver")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250415225246.work.458-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The s390 specific diag288_wdt watchdog driver makes use of the virtual
watchdog timer, which is available in most machine configurations.
If executing the diagnose instruction with subcode 0x288 results in an
exception the watchdog timer is not available, otherwise it is available.
In order to allow module autoload of the diag288_wdt module, move the
detection of the virtual watchdog timer to early boot code, and provide
its availability as a cpu feature.
This allows to make use of module_cpu_feature_match() to automatically load
the module iff the virtual watchdog timer is available.
Suggested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250410095036.1525057-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add watchdog driver for Lenovo SE30 platform
- Add support for Allwinner A523
- Add i.MX94 support
- watchdog framework: Convert to use device property
- renesas,wdt: Document RZ/G3E support
- Various other fixes and improvemenents
* tag 'linux-watchdog-6.15-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: sunxi_wdt: Add support for Allwinner A523
dt-bindings: watchdog: sunxi: add Allwinner A523 compatible string
watchdog: aspeed: fix 64-bit division
watchdog: npcm: Remove unnecessary NULL check before clk_prepare_enable/clk_disable_unprepare
dt-bindings: watchdog: renesas,wdt: Document RZ/G3E support
watchdog: Convert to use device property
watchdog: lenovo_se30_wdt: include io.h for devm_ioremap()
dt-bindings: watchdog: fsl-imx7ulp-wdt: Add i.MX94 support
watchdog: nic7018_wdt: tidy up ACPI ID table
watchdog: s3c2410_wdt: Fix PMU register bits for ExynosAutoV920 SoC
watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform
watchdog: Enable RZV2HWDT driver depend on ARCH_RENESAS
watchdog: cros-ec: Add newlines to printks
watchdog: aspeed: Update bootstatus handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add sorting of mcount locations at build time
- Rework uaccess functions with C exception handling to shorten inline
assembly size and enable full inlining. This yields near-optimal code
for small constant copies with a ~40kb kernel size increase
- Add support for a configurable STRICT_MM_TYPECHECKS which allows to
generate better code, but also allows to have type checking for debug
builds
- Optimize get_lowcore() for common callers with alternatives that
nearly revert to the pre-relocated lowcore code, while also slightly
reducing syscall entry and exit time
- Convert MACHINE_HAS_* checks for single facility tests into cpu_has_*
style macros that call test_facility(), and for features with
additional conditions, add a new ALT_TYPE_FEATURE alternative to
provide a static branch via alternative patching. Also, move machine
feature detection to the decompressor for early patching and add
debugging functionality to easily show which alternatives are patched
- Add exception table support to early boot / startup code to get rid
of the open coded exception handling
- Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE
to ensure correct inlining and unrolling decisions
- Remove 2k page table leftovers now that s390 has been switched to
always allocate 4k page tables
- Split kfence pool into 4k mappings in arch_kfence_init_pool() and
remove the architecture-specific kfence_split_mapping()
- Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence
spurious KASAN warnings from opportunistic ftrace argument tracing
- Force __atomic_add_const() variants on s390 to always return void,
ensuring compile errors for improper usage
- Remove s390's ioremap_wt() and pgprot_writethrough() due to
mismatched semantics and lack of known users, relying on asm-generic
fallbacks
- Signal eventfd in vfio-ap to notify userspace when the guest AP
configuration changes, including during mdev removal
- Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap
drivers to avoid fake flex array confusion
- Cleanup trap code
- Remove references to the outdated linux390@de.ibm.com address
- Other various small fixes and improvements all over the code
* tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (78 commits)
s390: Use inline qualifier for all EX_TABLE and ALTERNATIVE inline assemblies
s390/kfence: Split kfence pool into 4k mappings in arch_kfence_init_pool()
s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()
s390/boot: Ignore vmlinux.map
s390/sysctl: Remove "vm/allocate_pgste" sysctl
s390: Remove 2k vs 4k page table leftovers
s390/tlb: Use mm_has_pgste() instead of mm_alloc_pgste()
s390/lowcore: Use lghi instead llilh to clear register
s390/syscall: Merge __do_syscall() and do_syscall()
s390/spinlock: Implement SPINLOCK_LOCKVAL with inline assembly
s390/smp: Implement raw_smp_processor_id() with inline assembly
s390/current: Implement current with inline assembly
s390/lowcore: Use inline qualifier for get_lowcore() inline assembly
s390: Move s390 sysctls into their own file under arch/s390
s390/syscall: Simplify syscall_get_arguments()
s390/vfio-ap: Notify userspace that guest's AP config changed when mdev removed
s390: Remove ioremap_wt() and pgprot_writethrough()
s390/mm: Add configurable STRICT_MM_TYPECHECKS
s390/mm: Convert pgste_val() into function
s390/mm: Convert pgprot_val() into function
...
|
|
The Allwinner A523 SoC comes with a watchdog very similar to the ones in
the previous Allwinner SoCs, but oddly enough moves the first half of its
registers up by one word. Since we have different offsets for these
registers across the other SoCs as well, this can simply be modelled by
just stating the new offsets in our per-SoC struct.
The rest of the IP is the same as in the D1, although the A523 moves its
watchdog to a separate MMIO frame, so it's not embedded in the timer
anymore. The driver can be ignorant of this, because the DT will take
care of this.
Add a new struct for the A523, specifying the SoC-specific details, and
tie the new DT compatible string to it.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20250307005712.16828-5-andre.przywara@arm.com
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
On 32-bit architectures, the new calculation causes a build failure:
ld.lld-21: error: undefined symbol: __aeabi_uldivmod
Since neither value is ever larger than a register, cast both
sides into a uintptr_t.
Fixes: 5c03f9f4d362 ("watchdog: aspeed: Update bootstatus handling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250314160248.502324-1-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
clk_prepare_enable/clk_disable_unprepare
clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter.Remove unneeded NULL check for clk here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250313084420.2481763-1-nichen@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Use device_property_read_u32() instead of of_property_read_u32() to support
reading the timeout from non-devicetree sources.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250311141009.756975-1-linux@roeck-us.net
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
After merging the watchdog tree, today's linux-next build (x86_64
allmodconfig) failed like this:
drivers/watchdog/lenovo_se30_wdt.c: In function 'lenovo_se30_wdt_probe':
drivers/watchdog/lenovo_se30_wdt.c:272:31: error: implicit declaration of function 'devm_ioremap' [-Wimplicit-function-declaration]
272 | priv->shm_base_addr = devm_ioremap(dev, base_phys, SHM_WIN_SIZE);
| ^~~~~~~~~~~~
drivers/watchdog/lenovo_se30_wdt.c:272:29: error: assignment to 'unsigned char *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
272 | priv->shm_base_addr = devm_ioremap(dev, base_phys, SHM_WIN_SIZE);
| ^
Caused by commit
c284153a2c55 ("watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform")
Somewhere alogn the way a change to some include file means that
linux/io.h is no longer implicitly included. I have added the following
patch for today.
Fixes: c284153a2c55 ("watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Link: https://lore.kernel.org/r/20250311210305.3c5a2313@canb.auug.org.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Tidy up ACPI ID table:
- drop ACPI_PTR() and hence replace acpi.h with mod_devicetable.h
- remove explicit driver_data initializer
- drop comma in the terminator entry
With that done, extend compile test coverage.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250304140114.1812452-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Fix the PMU register bits for the ExynosAutoV920 SoC.
This SoC has different bit information compared to its previous
version, ExynosAutoV9, and we have made the necessary adjustments.
rst_stat_bit:
- ExynosAutoV920 cl0 : 0
- ExynosAutoV920 cl1 : 1
cnt_en_bit:
- ExynosAutoV920 cl0 : 8
- ExynosAutoV920 cl1 : 8
Signed-off-by: Kyunghwan Seo <khwan.seo@samsung.com>
Signed-off-by: Sangwook Shin <sw617.shin@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250213004104.3881711-1-sw617.shin@samsung.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Watchdog driver implementation for Lenovo SE30 platform.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250131204855.1827-1-mpearson-lenovo@squebb.ca
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
RZ/G3E watchdog timer IP is similar to the one found on RZ/V2H. Both these
SoCs belong to the ARCH_RENESAS family. So, it makes sense to use
ARCH_RENESAS rather than ARCH_R9A09G057 to enable the RZV2HWDT driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250126132633.31956-3-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add newlines to printk messages so that the next record is more easily
readable.
Cc: Lukasz Majczak <lma@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250116224605.110870-1-swboyd@chromium.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The boot status in the watchdog device struct is updated during
controller probe stage. Application layer can get the boot status
through the command, cat /sys/class/watchdog/watchdogX/bootstatus.
The bootstatus can be,
WDIOF_CARDRESET => System is reset due to WDT timeout occurs.
Others => Other reset events, e.g., power on reset.
On ASPEED platforms, boot status is recorded in the SCU registers.
- AST2400: Only a bit is used to represent system reset triggered by
any WDT controller.
- AST2500/AST2600: System reset triggered by different WDT controllers
can be distinguished by different SCU bits.
Besides, on AST2400 and AST2500, since alternating boot event is
also triggered by using WDT timeout mechanism, it is classified
as WDIOF_CARDRESET.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250113093737.845097-2-chin-ting_kuo@aspeedtech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Move machine type detection to the decompressor and use static branches
to implement and use machine_is_[lpar|vm|kvm]() instead of a runtime check
via MACHINE_IS_[LPAR|VM|KVM].
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/a5c62f2b5e1ea1cf4d32f37bc2d21a8eeab2f875.1738746821.git.namcao@linutronix.de
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Qualcomm IPQ5424 DT binding
- da9052_wdt: add support for bootstatus bits
- Other small fixes and improvements
* tag 'linux-watchdog-6.14-rc1' of git://www.linux-watchdog.org/linux-watchdog:
dt-bindings: watchdog: Document Qualcomm IPQ5424
watchdog: rti_wdt: Fix an OF node leak in rti_wdt_probe()
watchdog: max77620: fix excess field in kerneldoc
watchdog: sp805_wdt: Drop documentation of non-existent `status` member
watchdog: rzv2h_wdt: Use local `dev` pointer in probe
watchdog: da9052_wdt: add support for bootstatus bits
watchdog: sp805: Report correct timeleft at maximum
watchdog: rti: Fix off-by-one in heartbeat recovery
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
|
|
kthread_create() creates a kthread without running it yet. kthread_run()
creates a kthread and runs it.
On the other hand, kthread_create_worker() creates a kthread worker and
runs it.
This difference in behaviours is confusing. Also there is no way to
create a kthread worker and affine it using kthread_bind_mask() or
kthread_affine_preferred() before starting it.
Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]()
that behaves just like kthread_run(). kthread_create_worker[_on_cpu]()
will now only create a kthread worker without starting it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
|
|
rti_wdt_probe() does not release the OF node reference obtained by
of_parse_phandle(). Add a of_node_put() call.
This was found by an experimental verification tool that I am
developing. Due to the lack of the actual device, no runtime test was
able to be performed.
Fixes: f20ca595ae23 ("watchdog:rit_wdt: Add support for WDIOF_CARDRESET")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250105111718.4184192-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The wdt_info does not exist in the struct being documented.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412281555.YMBF9azh-lkp@intel.com/
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241230-max77620_wdt-kerneldoc-fix-v1-1-8a3211818993@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Remove the documentation for the `status` field in the `sp805_wdt`
structure, as the field does not exist.
Signed-off-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241213192858.916377-1-prabhakar.csengg@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Update the `rzv2h_wdt_probe()` function to consistently use the local
`dev` pointer, which is already extracted from `&pdev->dev`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241213171157.898934-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Enable support for these bootstatus bits:
WDIOF_CARDRESET
WDIOF_OVERHEAT
WDIOF_POWERUNDER
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241210-da9052-wdt-v2-2-95a5756e9ac8@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
sp805_wdt::load_val is of type unsigned int. When the interrupt is
inactive wdt_timeleft adds one to the value, and then adds that to the
value used to calculate the time remaining. Unfortunately it's not
unlikely that load_val contains LOAD_MAX, which is 0xFFFFFFFF and wraps
to zero when one is added to it, resulting in the time left being
understated by about 21.7s. Fix this by ensuring the addition happens as
64-bit.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241203095744.3001795-1-mac@mcrowe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
According to AM62x TRM WDT period is (RTIDWDPRLD + 1) * (2^13) / RTICLK1,
Fix the heartbeat recovery. In practice this doesn't affect rounded
heatbeat in seconds, but it does correct 4% of error in milliseconds,
for, say, default 60s heartbeat. This affects last_ping calculation.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241126073646.126752-1-alexander.sverdlin@siemens.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The commit 3ab1663af6c1 ("watchdog: stm32_iwdg: Add pretimeout support")
introduces the support for the pre-timeout interrupt.
The support for this interrupt is optional but the driver uses the
platform_get_irq() which produces an error message during the driver
probe if we don't have any `interrupts` property in the DT.
Use the platform_get_irq_optional() API to get rid of the error message
as this property is optional.
Fixes: 3ab1663af6c1 ("watchdog: stm32_iwdg: Add pretimeout support")
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241218092227.771133-1-clement.legoffic@foss.st.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC style
inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys() and
phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"
* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
empty include/asm-generic/vga.h
sparc: get rid of asm/vga.h
asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
vt_buffer.h: get rid of dead code in default scr_...() instances
tty: serial: export serial_8250_warn_need_ioport
lib/iomem_copy: fix kerneldoc format style
hexagon: simplify asm/io.h for !HAS_IOPORT
loongarch: Use new fallback IO memcpy/memset
csky: Use new fallback IO memcpy/memset
arm64: Use new fallback IO memcpy/memset
New implementation for IO memcpy and IO memset
watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
__arch_xprod64(): make __always_inline when optimizing for performance
ARM: div64: improve __arch_xprod_64()
asm-generic/div64: optimize/simplify __div64_const32()
lib/math/test_div64: add some edge cases relevant to __div64_const32()
asm-generic: add an optional pfn_valid check to page_to_phys
asm-generic: provide generic page_to_phys and phys_to_page implementations
asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
tty: serial: handle HAS_IOPORT dependencies
...
|
|
Currently "timeout-sec" Device Tree property is being silently ignored:
even though watchdog_init_timeout() is being used, the driver always passes
"heartbeat" == DEFAULT_HEARTBEAT == 60 as argument.
Fix this by setting struct watchdog_device::timeout to DEFAULT_HEARTBEAT
and passing real module parameter value to watchdog_init_timeout() (which
may now be 0 if not specified).
Cc: stable@vger.kernel.org
Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241107203830.1068456-1-alexander.sverdlin@siemens.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Adds the compatibles and drvdata for the ExynosAuto V920 SoC. This SoC
is almost similar to ExynosAutoV9, but some CPU configurations are quite
different, so it should be added. Plus it also support DBGACK like as
GS101 SoC.
Signed-off-by: Byoungtae Cho <bt.cho@samsung.com>
Signed-off-by: Taewan Kim <trunixs.kim@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241021063903.793166-3-trunixs.kim@samsung.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add support for the Top Reset Generation Unit/Watchdog Timer found on
MT6735.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241106104738.195968-3-y.oudjana@protonmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Clear the IRQ enable bit of WDT_MODE before asserting software reset
in order to make TOPRGU issue a system reset signal instead of an IRQ.
Fixes: a44a45536f7b ("watchdog: Add driver for Mediatek watchdog")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241106104738.195968-2-y.oudjana@protonmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
PMU regs"
This reverts commit 746f0770f916e6c48e422d6a34e67eae16707f0e.
Now that we can register a SoC specific regmap with syscon using
of_syscon_register_regmap() api we can switch back to using
syscon_regmap_lookup_by_phandle() in the client drivers.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241029191131.2329414-1-peter.griffin@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
On RZ/G3S the watchdog can be part of a software-controlled PM domain. In
this case, the watchdog device need to be powered on in
struct watchdog_ops::restart API. This can be done though
pm_runtime_resume_and_get() API if the watchdog PM domain and watchdog
device are marked as IRQ safe. We mark the watchdog PM domain as IRQ safe
with GENPD_FLAG_IRQ_SAFE when the watchdog PM domain is registered and the
watchdog device though pm_runtime_irq_safe().
Before commit e4cf89596c1f ("watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait
context'") pm_runtime_get_sync() was used in watchdog restart handler
(which is similar to pm_runtime_resume_and_get() except the later one
handles the runtime resume errors).
Commit e4cf89596c1f ("watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait
context'") dropped the pm_runtime_get_sync() and replaced it with
clk_prepare_enable() to avoid invalid wait context due to genpd_lock()
in genpd_runtime_resume() being called from atomic context. But
clk_prepare_enable() doesn't fit for this either (as reported by
Ulf Hansson) as clk_prepare() can also sleep (it just not throw invalid
wait context warning as it is not written for this).
Because the watchdog device is marked now as IRQ safe (though this patch)
the irq_safe_dev_in_sleep_domain() call from genpd_runtime_resume() returns
1 for devices not registering an IRQ safe PM domain for watchdog (as the
watchdog device is IRQ safe, PM domain is not and watchdog PM domain is
always-on), this being the case for RZ/G3S with old device trees and
the rest of the SoCs that use this driver, we can now drop also the
clk_prepare_enable() calls in restart handler and rely on
pm_runtime_resume_and_get().
Thus, drop clk_prepare_enable() and use pm_runtime_resume_and_get() in
watchdog restart handler.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241015164732.4085249-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/watchdog/ to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241010203622.839625-4-u.kleine-koenig@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
For the watchdog timer to work properly on the QCML04 board we need to
set PWRGD enable in the Environment Controller Configuration Registers
Special Configuration Register 1 when it is not already set, this may
be the case when the watchdog is not enabled from within the BIOS.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241025063441.3494837-1-james.hilliard1@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Use the DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use __maybe_unused notation.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241018135821.274376-2-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Using the 'use_sw_pm' variable as global is not recommended
as it prevents multi instances of the driver to run.
Make it a member of the da9063 structure instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241018135821.274376-1-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This driver has a number of issues (accesses arbitrary I/O ports
without identifying the hardware, doesn't document what hardware it
supports, suspiciously inconsistent locking model, doesn't implement
WDIOC_SETTIMEOUT, potential integer overflow...)
The driver was added in 2003 and there's no evidence that it has any
recent user, all changes seem to be tree-wide, subsystem-wide, or the
result of static code analysis. So I believe we should simply drop
this legacy piece of code.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Message-ID: <20241011170710.484a257a@endymion.delvare>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241022114731.31f69c94@endymion.delvare
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add support for Airoha EN7851 watchdog. This is a very basic watchdog
with no pretimeout support, max timeout is 28 seconds and it ticks based
on half the SoC BUS clock.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241011104411.28659-2-ansuelsmth@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-10-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Link: https://lore.kernel.org/r/20241004200314.5459-9-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-8-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-7-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-6-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-5-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-4-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The core will do this already.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-3-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
So far, only 'watchdog_register_device' prints an error if registering
the watchdog driver fails. '__watchdog_register_device' doesn't.
Refactor the code so that both print out. Drivers can then rely on that
and skip their own error messages.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241004200314.5459-2-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
No need for it with devm_platform_ioremap_resource. Simplifies probe
slightly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241003214508.121107-1-rosenp@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The Apple A8X SoC seems to be slowest at resetting, taking up to around
125ms to reset. Wait 150ms to be safe here.
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241001170018.20139-3-towinchenmi@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Although there is an existing code comment about flushing the writes,
writes were not actually being flushed.
Actually flush the writes by changing readl_relaxed() to readl().
Fixes: 4ed224aeaf661 ("watchdog: Add Apple SoC watchdog driver")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241001170018.20139-2-towinchenmi@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The STM32MP15xx IWDG adds registers which permit this IP to generate
pretimeout interrupt. This interrupt can also be used to wake the CPU
from suspend. Implement support for generating this interrupt and let
userspace configure the pretimeout. In case the pretimeout is not
configured by user, set pretimeout to 3/4 of the WDT timeout cycle.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Tested-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240415134903.8084-1-marex@denx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
i2c_device_id::driver_data to 0
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240920153430.503212-18-u.kleine-koenig@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
In the current implementation, the value of max_hw_heartbeat_ms is set
to the timeout period expressed in milliseconds and fails to verify if
the close window percentage exceeds the maximum value that the hardware
supports.
1. Calculate max_hw_heartbeat_ms based on input clock frequency.
2. Update frequency check to require a minimum frequency of 1Mhz.
3. Limit the close and open window percent to hardware supported value
to avoid truncation.
4. If the user input timeout exceeds the maximum timeout supported, use
only open window and the framework supports the higher timeouts.
Fixes: 12984cea1b8c ("watchdog: xilinx_wwdt: Add Versal window watchdog support")
Signed-off-by: Harini T <harini.t@amd.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240913113230.1939373-1-harini.t@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Commit da23b6faa8bf ("watchdog: iTCO: Add support for Cannon Lake
PCH iTCO") does not mask NMI_NOW bit during TCO1_CNT register's
value comparison for update_no_reboot_bit() call causing following
failure:
...
iTCO_vendor_support: vendor-support=0
iTCO_wdt iTCO_wdt: unable to reset NO_REBOOT flag, device
disabled by hardware/BIOS
...
and this can lead to unexpected NMIs later during regular
crashkernel's workflow because of watchdog probe call failures.
This change masks NMI_NOW bit for TCO1_CNT register values to
avoid unexpected NMI_NOW bit inversions.
Fixes: da23b6faa8bf ("watchdog: iTCO: Add support for Cannon Lake PCH iTCO")
Signed-off-by: Oleksandr Ocheretnyi <oocheret@cisco.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20240913191403.2560805-1-oocheret@cisco.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Correctly spelled comments make it easier for the reader to understand
the code.
Fix typos:
'hearbeat' -> 'heartbeat',
'retrigggers' -> 'retriggers',
'funtions' -> 'functions',
'Resgister' -> 'Register'.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Link: https://lore.kernel.org/r/20240923075016.2439774-1-yanzhen@vivo.com
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Both drivers use I/O port accesses without declaring a dependency on
CONFIG_HAS_IOPORT. For sbc8360_wdt this causes a compile error on UML
once inb()/outb() helpers become conditional.
For sbc7240_wdt this causes no such errors with UML because this driver
depends on both x86_32 and !UML. Nevertheless add HAS_IOPORT as
a dependency for both drivers to be explicit and drop the !UML
dependency for sbc7240_wdt as it is now redundant since UML implies no
HAS_IOPORT.
Fixes: 52df67b6b313 ("watchdog: add HAS_IOPORT dependencies")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next
Linux 6.12-rc3
|
|
Add watchdog timer support for the Congatec Board Controller.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-4-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Watchdog Timer driver for RZ/V2H(P)
- Add Cirrus EP93x
- Some small fixes and improvements
* tag 'linux-watchdog-6.12-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Convert comma to semicolon
watchdog: rzv2h_wdt: Add missing MODULE_LICENSE tag to fix modpost error
dt-bindings: watchdog: Add Cirrus EP93x
dt-bindings: watchdog: stm32-iwdg: Document interrupt and wakeup properties
drivers: watchdog: marvell_gti: Convert comma to semicolon
watchdog: iTCO_wdt: Convert comma to semicolon
watchdog: Add Watchdog Timer driver for RZ/V2H(P)
dt-bindings: watchdog: renesas,wdt: Document RZ/V2H(P) SoC
watchdog: imx_sc_wdt: detect if already running
watchdog: imx2_wdt: Remove __maybe_unused notations
watchdog: imx_sc_wdt: Don't disable WDT in suspend
watchdog: imx7ulp_wdt: move post_rcs_wait into struct imx_wdt_hw_feature
|
|
To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Link: https://lore.kernel.org/r/20240910070058.40867-1-shenlichuan@vivo.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add the missing `MODULE_LICENSE()` tag to the `rzv2h_wdt` driver, which
resolves the following modpost error when built as a module:
ERROR: modpost: missing MODULE_LICENSE() in drivers/watchdog/rzv2h_wdt.o
Fixes: f6febd0a30b6 ("watchdog: Add Watchdog Timer driver for RZ/V2H(P)")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240911132031.544479-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add OF ID match table.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This is a platform/x86 library that can only be used on x86 devices.
so it makes sense that it lives under the platform_data/x86/ directory
instead.
No functional changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240909124952.1152017-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This is a platform/x86 library that is mostly being used by other
drivers not directly under arch/x86 anyway (with the exception of the
Intel MID setup code) so it makes sense that it lives under the
platform_data/x86/ directory instead.
No functional changes intended.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240909124952.1152017-3-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240902080419.3824706-1-nichen@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240902081051.3824822-1-nichen@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add Watchdog Timer driver for RZ/V2H(P) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240829193831.80768-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Firmware (SC) WDT can be already enabled in U-Boot. Detect this case and
make CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED functional by setting
WDOG_HW_RUNNING.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240828060212.108608-1-alexander.sverdlin@siemens.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Use the DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use __maybe_unused notation.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240809020822.335682-1-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Parts of the suspend and resume chain is left unprotected if we disable
the WDT here.
>From experiments we can see that the SCU disables and re-enables the WDT
when we enter and leave suspend to ram. By not touching the WDT here we
are protected by the WDT all the way to the SCU.
Signed-off-by: Jonas Blixt <jonas.blixt@actia.se>
CC: Anson Huang <anson.huang@nxp.com>
Fixes: 986857acbc9a ("watchdog: imx_sc: Add i.MX system controller watchdog support")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240801121845.1465765-1-jonas.blixt@actia.se
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Move post_rcs_wait into struct imx_wdt_hw_feature to simple code logic for
difference compatible string.
i.MX93 watchdog needn't wait 2.5 clocks after RCS is done. So needn't set
post_rcs_wait.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240730145610.2177627-1-Frank.Li@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- make watchdog_class const
- rework of the rzg2l_wdt driver
- other small fixes and improvements
* tag 'linux-watchdog-6.11-rc1' of git://www.linux-watchdog.org/linux-watchdog:
dt-bindings: watchdog: dlg,da9062-watchdog: Drop blank space
watchdog: rzn1: Convert comma to semicolon
watchdog: lenovo_se10_wdt: Convert comma to semicolon
dt-bindings: watchdog: renesas,wdt: Document RZ/G3S support
watchdog: rzg2l_wdt: Add suspend/resume support
watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset
watchdog: rzg2l_wdt: Remove comparison with zero
watchdog: rzg2l_wdt: Remove reset de-assert from probe
watchdog: rzg2l_wdt: Check return status of pm_runtime_put()
watchdog: rzg2l_wdt: Use pm_runtime_resume_and_get()
watchdog: rzg2l_wdt: Make the driver depend on PM
watchdog: rzg2l_wdt: Restrict the driver to ARCH_RZG2L and ARCH_R9A09G011
watchdog: imx7ulp_wdt: keep already running watchdog enabled
watchdog: starfive: Add missing clk_disable_unprepare()
watchdog: Make watchdog_class const
|
|
Replace a comma between expression statements by a semicolon.
Fixes: d65112f58464 ("watchdog: Add Renesas RZ/N1 Watchdog driver")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240716031137.400502-1-nichen@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Replace a comma between expression statements by a semicolon.
Fixes: 1f6602c8ed1e ("watchdog: lenovo_se10_wdt: Watchdog driver for Lenovo SE10 platform")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20240716030725.400400-1-nichen@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- ROHM BD96801 Power Management IC
- Cirrus Logic CS40L50 Haptic Driver with Waveform Memory
- Marvell 88PM886 Power Management IC
New Device Support:
- Keyboard Backlight to ChromeOS Embedded Controller
- LEDs to ChromeOS Embedded Controller
- Charge Control to ChromeOS Embedded Controller
- HW Monitoring Service to ChromeOS Embedded Controller
- AUXADCs to MediaTek MT635{7,8,9} Power Management ICs
New Functionality:
- Allow Syscon consumers to supply their own Regmaps on registration
Fix-ups:
- Constify/staticise applicable data structures
- Remove superfluous/duplicated/unused sections
- Device Tree binding adaptions/conversions/creation
- Trivial; spelling, whitespace, coding-style adaptions
- Utilise centrally provided helpers and macros to aid
simplicity/duplication
- Drop i2c_device_id::driver_data where the value is unused
- Replace ACPI/DT firmware helpers with agnostic variants
- Move over to GPIOD (descriptor-based) APIs
- Annotate a bunch of __counted_by() cases
- Straighten out some includes
Bug Fixes:
- Ensure potentially asserted recent lines are deasserted during
initialisation
- Avoid "<module>.ko is added to multiple modules" warnings
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Fix Wvoid-pointer-to-enum-cast warnings"
* tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits)
mfd: timberdale: Attach device properties to TSC2007 board info
mfd: tmio: Move header to platform_data
mfd: tmio: Sanitize comments
mfd: tmio: Update include files
mmc: tmio/sdhi: Fix includes
mfd: tmio: Remove obsolete io accessors
mfd: tmio: Remove obsolete platform_data
watchdog: bd96801_wdt: Add missing include for FIELD_*()
dt-bindings: mfd: syscon: Add APM poweroff mailbox
dt-bindings: mfd: syscon: Split and enforce documenting MFD children
dt-bindings: mfd: rk817: Merge support for RK809
dt-bindings: mfd: rk817: Fixup clocks and reference dai-common
dt-bindings: mfd: syscon: Add TI's opp table compatible
mfd: omap-usb-tll: Use struct_size to allocate tll
dt-bindings: mfd: Explain lack of child dependency in simple-mfd
dt-bindings: mfd: Dual licensing for st,stpmic1 bindings
mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by
mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode()
mfd: lm3533: Move to new GPIO descriptor-based APIs
mfd: tps65912: Use devm helper functions to simplify probe
...
|
|
The RZ/G3S supports deep sleep states where power to most of the IP blocks
is cut off. To ensure proper working of the watchdog when resuming from
such states, the suspend function is stopping the watchdog and the resume
function is starting it. There is no need to configure the watchdog
in case the watchdog was stopped prior to starting suspend.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-9-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The reset driver has been adapted in commit da235d2fac21
("clk: renesas: rzg2l: Check reset monitor registers") to check the reset
monitor bits before declaring reset asserts/de-asserts as
successful/failure operations. With that, there is no need to keep the
reset workaround for RZ/V2M in place in the watchdog driver.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-8-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
devm_add_action_or_reset() could return -ENOMEM or zero. Thus, remove
comparison with zero of the returning value to make code simpler.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-7-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
There is no need to de-assert the reset signal on probe as the watchdog
is not used prior executing start. Also, the clocks are not enabled in
probe (pm_runtime_enable() doesn't do that), thus this is another indicator
that the watchdog wasn't used previously like this. Instead, keep the
watchdog hardware in its previous state at probe (by default it is in
reset state), enable it when it is started and move it to reset state
when it is stopped. This saves some extra power when the watchdog is
unused.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
pm_runtime_put() may return an error code. Check its return status.
Along with it the rzg2l_wdt_set_timeout() function was updated to
propagate the result of rzg2l_wdt_stop() to its caller.
Fixes: 2cbc5cd0b55f ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
pm_runtime_get_sync() may return with error. In case it returns with error
dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get()
takes care of this. Thus use it.
Along with it the rzg2l_wdt_set_timeout() function was updated to
propagate the result of rzg2l_wdt_start() to its caller.
Fixes: 2cbc5cd0b55f ("watchdog: Add Watchdog Timer driver for RZ/G2L")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The rzg2l_wdt watchdog driver cannot work w/o CONFIG_PM=y (e.g. the
clocks are enabled though pm_runtime_* specific APIs). To avoid building
a driver that doesn't work make explicit the dependency on CONFIG_PM.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The rzg2l_wdt driver is used only by ARCH_RZG2L and ARCH_R9A09G011
micro-architectures of Renesas. Thus, limit it's usage only to these.
Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240531065723.1085423-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
When the bootloader enabled the watchdog before Kernel started then
keep it enabled during initialization. Otherwise the time between
the watchdog probing and the userspace taking over the watchdog
won't be covered by the watchdog. When keeping the watchdog enabled
inform the Kernel about this by setting the WDOG_HW_RUNNING so that
the periodic watchdog feeder is started when desired.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240703111603.1096424-1-s.hauer@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add the missing clk_disable_unprepare() before return in
starfive_wdt_enable_clock().
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240628033508.281058-1-nichen@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Now that the driver core allows for struct class to be in read-only
memory, mark watchdog_class as const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240614-class-const-wdt-v1-1-f9a4e2b1ba76@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The FIELD_PREP() and FIELD_GET() macros are defined in the
linux/bitfield.h. Include this header to avoid missing the macro
definitions.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406300817.hcJ9VtLf-lkp@intel.com/
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/ZoJhQVF-U6sSJ_Sg@fedora
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Introduce driver for WDG block on ROHM BD96801 scalable PMIC.
This driver only supports watchdog with I2C feeding and delayed
response detection. Whether the watchdog toggles PRSTB pin or
just causes an interrupt can be configured via device-tree.
The BD96801 PMIC HW supports also window watchdog (too early
feeding detection) and Q&A mode. These are not supported by
this driver.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/bb3a49d606e793a61b0c033170ff2a9f30f3c2a5.1719473802.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/watchdog/omap_wdt.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/watchdog/twl4030_wdt.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/watchdog/ts4800_wdt.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/watchdog/simatic-ipc-wdt.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/watchdog/menz69_wdt.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240607-md-drivers-watchdog-v1-1-485c1c58301f@quicinc.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Once the inb()/outb() helpers become conditional, the newly added driver
fails to link on targets without CONFIG_HAS_IOPORT:
In file included from arch/arm64/include/asm/io.h:299,
from include/linux/io.h:14,
from drivers/watchdog/lenovo_se10_wdt.c:8:
drivers/watchdog/lenovo_se10_wdt.c: In function 'set_bram':
include/asm-generic/io.h:596:15: error: call to '_outb' declared with attribute error: outb() requires CONFIG_HAS_IOPORT
596 | #define _outb _outb
include/asm-generic/io.h:655:14: note: in expansion of macro '_outb'
655 | #define outb _outb
| ^~~~~
drivers/watchdog/lenovo_se10_wdt.c:67:9: note: in expansion of macro 'outb'
67 | outb(offset, bram_base);
| ^~~~
Add the same dependency we added to the other such drivers.
Fixes: 1f6602c8ed1e ("watchdog: lenovo_se10_wdt: Watchdog driver for Lenovo SE10 platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240528120759.3491774-1-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The Lenovo SE10 watchdog is only present on Lenovo ThinkEdge SE10
platforms, which are based on Intel Atom SoCs, and its driver relies on
DMI tables. Hence add dependencies on X86 && DMI, to prevent asking the
user about this driver when configuring a kernel without Intel Atom or
DMI support.
While at it, fix the odd indentation (spaces instead of TABs).
Fixes: 1f6602c8ed1eccac ("watchdog: lenovo_se10_wdt: Watchdog driver for Lenovo SE10 platform")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/58005595a05ef803b454b78d3ae9b8ee0675bd5d.1715076440.git.geert+renesas@glider.be
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
devm_ioremap() doesn't return error pointers, it returns NULL on error.
Update the check accordingly.
Fixes: e86bd43bcfc5 ("watchdog: sa1100: use platform device registration")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240426075808.1582678-1-nichen@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
On AM62x, the watchdog is pet before the valid window is open. Fix
min_hw_heartbeat and accommodate a 2% + static offset safety margin.
The static offset accounts for max hardware error.
Remove the hack in the driver which shifts the open window boundary,
since it is no longer necessary due to the fix mentioned above.
cc: stable@vger.kernel.org
Fixes: 5527483f8f7c ("watchdog: rti-wdt: attach to running watchdog during probe")
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240417205700.3947408-1-jm@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240410084201.1481930-2-schnelle@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_of() to avoid the need for a temporary cpumask on the stack
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/TYTP286MB3564B037A81DAAE1AC3A16F3CA062@TYTP286MB3564.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The always-running (from linux,wdt-gpio.yaml) is abused by the BD9576
watchdog driver. It's defined meaning is "the watchdog is always running
and can not be stopped". The BD9576 watchdog driver has implemented it
as "start watchdog when loading the module and prevent it from being
stopped".
Furthermore, the implementation does not set the WDOG_HW_RUNNING when
enabling the watchdog due to the "always-running" at module loading.
This will end up resulting a watchdog timeout if the device is not
opened.
The culprit was pointed out by Guenter, discussion can be found from
https://lore.kernel.org/lkml/4fa3a64b-60fb-4e5e-8785-0f14da37eea2@roeck-us.net/
Drop the invalid "always-running" handling.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: b237bcac557a ("wdt: Support wdt on ROHM BD9576MUF and BD9573MUF")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/ZhPAt76yaJMersXf@fedora
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Core in platform_driver_register() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240327174638.519445-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
When the cpu5wdt module is removing, the origin code uses del_timer() to
de-activate the timer. If the timer handler is running, del_timer() could
not stop it and will return directly. If the port region is released by
release_region() and then the timer handler cpu5wdt_trigger() calls outb()
to write into the region that is released, the use-after-free bug will
happen.
Change del_timer() to timer_shutdown_sync() in order that the timer handler
could be finished before the port region is released.
Fixes: e09d9c3e9f85 ("watchdog: cpu5wdt.c: add missing del_timer call")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240324140444.119584-1-duoming@zju.edu.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Watchdog driver implementation for Lenovo SE10 platform.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: David Ober <dober@lenovo.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240315195227.91282-1-mpearson-lenovo@squebb.ca
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Remove usage of the deprecated ida_simple_xx() API
- Add kernel-doc for wdt_set_timeout()
- Add support for R-Car V4M, StarFive's JH8100 and sam9x7-wdt
- Fixes and small improvements
* tag 'linux-watchdog-6.9-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: intel-mid_wdt: Get platform data via dev_get_platdata()
watchdog: intel-mid_wdt: Don't use "proxy" headers
watchdog: intel-mid_wdt: Remove unused intel-mid.h
dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt
dt-bindings: watchdog: sprd,sp9860-wdt: convert to YAML
dt-bindings: watchdog: starfive,jh7100-wdt: Add compatible for JH8100
watchdog: stm32_iwdg: initialize default timeout
dt-bindings: watchdog: arm,sp805: document the reset signal
watchdog: sp805_wdt: deassert the reset if available
watchdog/hpwdt: Support Suspend and Resume
dt-bindings: watchdog: renesas-wdt: Add support for R-Car V4M
watchdog: starfive: check watchdog status before enabling in system resume
watchdog: starfive: Check pm_runtime_enabled() before decrementing usage counter
watchdog: qcom: fine tune the max timeout value calculation
watchdog: Add kernel-doc for wdt_set_timeout()
watchdog: core: Remove usage of the deprecated ida_simple_xx() API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for Watchdog to ChromeOS Embedded Controller
- Add support for GPIOs to ChromeOS Embedded Controller
- Add supprt for Sound to MediaTek MT6357 CODEC
New Functionality:
- Add power-off functionality to Texas Instruments TWL series CODECs
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Trivial; spelling, whitespace, clean-ups, etc
- Remove superfluous code and simplify overall
- Fix include lists; alphabetise, remove unused, explicitly add used
- Use dev_err_probe() to clean-up error paths
- Convert used cache type over to the Maple Tree in many instances
- Constify a bunch of static structs
- Refrain from over-riding resources provided via the firmware
Bug Fixes:
- Fix a clock related firmware bug on Dell XPS 9530 et al.
- Repair incorrect IRQ designations
- Increase buffer sizes to omit various snprintf compiler errors
- Ensure errors are handled properly
- Balance references and prevent resource leaks
- Rectify Power Key interrupt processing
- Fix Kconfig related build errors
- Correct a bunch of register start-up default values"
* tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults
mfd: cs42l43: Fix wrong register defaults
mfd: mt6397-core: Register mt6357 sound codec
dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible
dt-bindings: mfd: dlg,da9063: Make #interrupt-cells required
dt-bindings: mfd: Convert atmel-flexcom to json-schema
mfd: kempld-core: Don't replace resources provided by ACPI
mfd: cros_ec_dev: Add GPIO device if feature present on EC
dt-bindings: mfd: cros-ec: Add properties for GPIO controller
mfd: twl: Select MFD_CORE
mfd: core: Constify the struct device_type usage
mfd: rk8xx-core: Fix interrupt processing order for power key button
mfd: twl4030-power: Accept standard property for power controller
mfd: twl-core: Add power off implementation for twl603x
dt-bindings: mfd: ti,twl: Document system-power-controller
mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref
mfd: syscon: Remove extern from function prototypes
mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref
mfd: mc13xxx: Use bitfield helpers
mfd: rc5t583: Convert to use maple tree register cache
...
|
|
Access to platform data via dev_get_platdata() getter to make code cleaner.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240305165306.1366823-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240305165306.1366823-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
intel-mid.h is providing some core parts of the South Complex PM,
which are usually are not used by individual drivers. In particular,
this driver doesn't use it, so simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240305165306.1366823-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The driver never sets a default timeout value, therefore it is
initialized to zero. When CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is
enabled, the watchdog is started during probe. The kernel is supposed to
automatically ping the watchdog from this point until userspace takes
over, but this does not happen if the configured timeout is zero. A zero
timeout causes watchdog_need_worker() to return false, so the heartbeat
worker does not run and the system therefore resets soon after the
driver is probed.
This patch fixes this by setting an arbitrary non-zero default timeout.
The default could be read from the hardware instead, but I didn't see
any reason to add this complexity.
This has been tested on an STM32F746.
Fixes: 85fdc63fe256 ("drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240228182723.12855-1-ben.wolsieffer@hefring.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
According to the datasheet, the core has an WDOGRESn input signal that
needs to be deasserted before being operational. Implement it in the
driver.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240221-hisi-wdt-v3-1-9642613dc2e6@outlook.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add call backs to support suspend and resume.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240214164941.630775-2-jerry.hoemann@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
System resume will start and enable watchdog regardless of whether the
watchdog is enabled/disabled during a system suspend.
Add a check to the watchdog status and only start and enable the
watchdog if the watchdog status is running/active.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240130055118.1917086-1-jisheng.teoh@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
In the probe function, pm_runtime_put_sync() will fail on platform with
runtime PM disabled.
Check if runtime PM is enabled before calling pm_runtime_put_sync() to
fix it.
Fixes: db728ea9c7be ("drivers: watchdog: Add StarFive Watchdog driver")
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240119082722.1133024-1-jisheng.teoh@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
To determine the max_timeout value, the below calculation is used.
max_timeout = 0x10000000 / clk_rate
cat /sys/devices/platform/soc@0/b017000.watchdog/watchdog/watchdog0/max_timeout
8388
However, this is not valid for all the platforms. IPQ SoCs starting from
IPQ40xx and recent Snapdragron SoCs also has the bark and bite time field
length of 20bits, which can hold max up to 32 seconds if the clk_rate is
32KHz.
If the user tries to configure the timeout more than 32s, then the value
will be truncated and the actual value will not be reflected in the HW.
To avoid this, lets add a variable called max_tick_count in the device data,
which defines max counter value of the WDT controller. Using this, max-timeout
will be calculated in runtime for various WDT contorllers.
With this change, we get the proper max_timeout as below and restricts
the user from configuring the timeout higher than this.
cat /sys/devices/platform/soc@0/b017000.watchdog/watchdog/watchdog0/max_timeout
32
Signed-off-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240116-wdt-v2-1-501c7694c3f0@quicinc.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The wdt_set_timeout function lacked a complete kernel-doc
description. This patch adds missing parameter and return
value descriptions in accordance with kernel-doc standards.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Guenter Roeck <linux@roeckus.net>
Link: https://lore.kernel.org/r/20240206093857.62444-1-yang.lee@linux.alibaba.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range()/ida_alloc_max() is inclusive. So a -1 has been added when
needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/bc5b82db59ccac69f2612ba104e2f5100401a862.1705009009.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Obtain the PMU regmap using the new API added to exynos-pmu driver rather
than syscon_regmap_lookup_by_phandle(). As this driver no longer depends
on mfd syscon remove that header and Kconfig dependency.
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240220220613.797068-3-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Embedded Controller (EC) present on Chromebook devices
can be used as a watchdog.
Implement a driver to support it.
Signed-off-by: Lukasz Majczak <lma@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240126095721.782782-3-lma@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Mediatek MT7988 watchdog
- Add IT8659 watchdog
- watchdog: set cdev owner before adding
- hpwdt: Only claim UNKNOWN NMI if from iLO
- Various other fixes and improvements
* tag 'linux-watchdog-6.8-rc1' of git://www.linux-watchdog.org/linux-watchdog: (30 commits)
watchdog: mlx_wdt: fix all kernel-doc warnings
dt-bindings: watchdog: qcom,pm8916-wdt: add parent spmi node to example
dt-bindings: watchdog: nxp,pnx4008-wdt: convert txt to yaml
dt-bindings: watchdog: qca,ar7130-wdt: convert txt to yaml
dt-bindings: watchdog: intel,keembay: reference common watchdog schema
dt-bindings: watchdog: re-order entries to match coding convention
watchdog: it87_wdt: Keep WDTCTRL bit 3 unmodified for IT8784/IT8786
watchdog: it87_wdt: Add IT8659 ID
watchdog: it87_wdt: Remove redundant max_units setting
watchdog: it87_wdt: add blank line after variable declaration
dt-bindings: wdt: Add ts72xx
dt-bindings: watchdog: dlg,da9062-watchdog: Document DA9063 watchdog
dt-bindings: watchdog: dlg,da9062-watchdog: Add fallback for DA9061 watchdog
watchdog: rti_wdt: Drop runtime pm reference count when watchdog is unused
watchdog: starfive: add lock annotations to fix context imbalances
watchdog: mediatek: mt7988: add wdt support
dt-bindings: watchdog: mediatek,mtk-wdt: add MT7988 watchdog and toprgu
dt-bindings: watchdog: realtek,rtd1295-watchdog: convert txt to yaml
watchdog: bcm2835_wdt: Fix WDIOC_SETTIMEOUT handling
watchdog/hpwdt: Remove unused variable
...
|
|
Correct kernel-doc warnings as reported by kernel test robot:
mlx_wdt.c:56: warning: Function parameter or member 'wdt_type' not described in 'mlxreg_wdt'
mlx_wdt.c:56: warning: Excess struct member 'device' description in 'mlxreg_wdt'
mlx_wdt.c:56: warning: Excess struct member 'timeout' description in 'mlxreg_wdt'
mlx_wdt.c:56: warning: Excess struct member 'wd_type' description in 'mlxreg_wdt'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312171701.xNkzdgdi-lkp@intel.com/
Cc: Michael Shych <michaelsh@nvidia.com>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-watchdog@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231218062659.26916-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
WDTCTRL bit 3 sets the mode choice for the clock input of IT8784/IT8786.
Some motherboards require this bit to be set to 1 (= PCICLK mode),
otherwise the watchdog functionality gets broken. The BIOS of those
motherboards sets WDTCTRL bit 3 already to 1.
Instead of setting all bits of WDTCTRL to 0 by writing 0x00 to it, keep
bit 3 of it unchanged for IT8784/IT8786 chips. In this way, bit 3 keeps
the status as set by the BIOS of the motherboard.
Watchdog tests have been successful with this patch with the following
systems:
IT8784: Thomas-Krenn LES plus v2 (YANLING YL-KBRL2 V2)
IT8786: Thomas-Krenn LES plus v3 (YANLING YL-CLU L2)
IT8786: Thomas-Krenn LES network 6L v2 (YANLING YL-CLU6L)
Link: https://lore.kernel.org/all/140b264d-341f-465b-8715-dacfe84b3f71@roeck-us.net/
Signed-off-by: Werner Fischer <devlists@wefi.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213094525.11849-4-devlists@wefi.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This patch adds watchdog support for the ITE IT8659 watchdog.
IT8659 watchdog works in the same way as the other watchdogs supported
by it87_wdt.
Before this patch, IT8659 watchdog is not supported. After a modprobe,
dmesg reports:
it87_wdt: Unknown Chip found, Chip 8659 Revision 0007
With this patch, modprobe it87_wdt recognizes the watchdog as the dmesg
output shows:
it87_wdt: Chip IT8659 revision 7 initialized. timeout=60 sec (nowayout=0
testmode=0)
Watchdog tests on a YANLING YL-ALP3L2C-1235U system have been successful,
the watchdog works as expected with this patch.
Signed-off-by: Werner Fischer <devlists@wefi.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213094525.11849-3-devlists@wefi.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Commit 893dc8b5c978 ("watchdog: it87: Drop support for resetting watchdog
though CIR and Game port") removed the try_gameport variable, and left
max_units setting redundant.
To clean up the code, this patch removes this redundant setting.
Signed-off-by: Werner Fischer <devlists@wefi.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213094525.11849-2-devlists@wefi.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This patch fixes the following checkpatch.pl warning:
WARNING: Missing a blank line after declarations
Signed-off-by: Werner Fischer <devlists@wefi.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213094525.11849-1-devlists@wefi.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Call runtime_pm_put*() if watchdog is not already started during probe and re
enable it in watchdog start as required.
On K3 SoCs, watchdogs and their corresponding CPUs are under same
power-domain, so if the reference count of unused watchdogs aren't
dropped, it will lead to CPU hotplug failures as Device Management
firmware won't allow to turn off the power-domain due to dangling
reference count.
Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213140110.938129-1-vigneshr@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add the necessary __acquires() and __releases() to the functions
that take and release the wdt lock to avoid the following sparse
warnings:
drivers/watchdog/starfive-wdt.c:204:13: warning: context imbalance in 'starfive_wdt_unlock' - wrong count at exit
drivers/watchdog/starfive-wdt.c:212:9: warning: context imbalance in 'starfive_wdt_lock' - unexpected unlock
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231122085118.177589-1-ben.dooks@codethink.co.uk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add support for watchdog and reset generator unit of the MediaTek
MT7988 SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/c0cf5f701801cce60470853fa15f1d9dced78c4f.1700504385.git.daniel@makrotopia.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Users report about the unexpected behavior for setting timeouts above
15 sec on Raspberry Pi. According to watchdog-api.rst the ioctl
WDIOC_SETTIMEOUT shouldn't fail because of hardware limitations.
But looking at the code shows that max_timeout based on the
register value PM_WDOG_TIME_SET, which is the maximum.
Since 664a39236e71 ("watchdog: Introduce hardware maximum heartbeat
in watchdog core") the watchdog core is able to handle this problem.
This fix has been tested with watchdog-test from selftests.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217374
Fixes: 664a39236e71 ("watchdog: Introduce hardware maximum heartbeat in watchdog core")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231112173251.4827-1-wahrenst@gmx.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Remove the unused variable ilo5.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213215340.495734-4-jerry.hoemann@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
ProLiants of vintage to have an iLO 5, no longer send watchdog NMI
as an IO CHECK. They are presented to hpwdt_pretimeout as NMI_UNKNOWN.
The preceding if statement rejects if !mynmi irrespective of value
of pretimeout making this if statement redundant.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213215340.495734-3-jerry.hoemann@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Avoid unnecessary crashes by claiming only NMIs that are due to
ERROR signalling or generated by the hpwdt hardware device.
The code does this, but only for iLO5.
The intent was to preserve legacy, Gen9 and earlier, semantics of
using hpwdt for error containtment as hardware/firmware would signal
fatal IO errors as an NMI with the expectation of hpwdt crashing
the system. Howerver, these IO errors should be received by hpwdt
as an NMI_IO_CHECK. So the test is overly permissive and should
not be limited to only ilo5.
We need to enable this protection for future iLOs not matching the
current PCI IDs.
Fixes: 62290a5c194b ("watchdog: hpwdt: Claim NMIs generated by iLO5")
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213215340.495734-2-jerry.hoemann@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and also slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __refdata which
is needed to suppress a (W=1) modpost warning:
WARNING: modpost: drivers/watchdog/txx9wdt: section mismatch in reference: txx9wdt_driver+0x4 (section: .data) -> txx9wdt_remove (section: .exit.text)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and also slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __refdata which
is needed to suppress a (W=1) modpost warning:
WARNING: modpost: drivers/watchdog/at91sam9_wdt: section mismatch in reference: at91wdt_driver+0x4 (section: .data) -> at91wdt_remove (section: .exit.text)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231106154807.3866712-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
