| Age | Commit message (Collapse) | Author |
|---|
|
In commit b61aa76e4 I added an assumption in jsonb_object_agg_finalfn
that it'd be okay to apply uniqueifyJsonbObject repeatedly to a
JsonbValue. I should have studied that code more closely first,
because in skip_nulls mode it removed leading nulls by changing the
"pairs" array start pointer. This broke the data structure's
invariants in two ways: pairs no longer references a repalloc-able
chunk, and the distance from pairs to the end of its array is less
than parseState->size. So any subsequent addition of more pairs is
at high risk of clobbering memory and/or causing repalloc to crash.
Unfortunately, adding more pairs is exactly what will happen when the
aggregate is being used as a window function.
Fix by rewriting uniqueifyJsonbObject to not do that. The prior
coding had little to recommend it anyway.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/ec5e96fb-ee49-4e5f-8a09-3f72b4780538@gmail.com
|
|
The general case for converting to a JSONB numeric value is to run the
source datatype's output function and then numeric_in, but we can do
substantially better than that for integer and numeric source values.
This patch improves the speed of jsonb_agg by 30% for integer input,
and nearly 2X for numeric input.
Sadly, the obvious idea of using float4_numeric and float8_numeric
to speed up those cases doesn't work: they are actually slower than
the generic coerce-via-I/O method, and not by a small amount.
They might round off differently than this code has historically done,
too. Leave that alone pending possible changes in those functions.
We can also do better than the existing code for text/varchar/bpchar
source data; this optimization is similar to one that already exists
in the json_agg() code. That saves 20% or so for such inputs.
Also make a couple of other minor improvements, such as not giving
JSONTYPE_CAST its own special case outside the switch when it could
perfectly well be handled inside, and not using dubious string hacking
to detect infinity and NaN results.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/1060917.1753202222@sss.pgh.pa.us
|
|
The various variants of jsonb_agg() operate as follows,
for each aggregate input value:
1. Build a JsonbValue tree representation of the input value.
2. Flatten the JsonbValue tree into a Jsonb in on-disk format.
3. Iterate through the Jsonb, building a JsonbValue that is part
of the aggregate's state stored in aggcontext, but is otherwise
identical to what phase 1 built.
This is very slightly less silly than it sounds, because phase 1
involves calling non-JSONB code such as datatype output functions,
which are likely to leak memory, and we don't want to leak into the
aggcontext. Nonetheless, phases 2 and 3 are accomplishing exactly
nothing that is useful if we can make phase 1 put the JsonbValue
tree where we need it. We could probably do that with a bunch of
MemoryContextSwitchTo's, but what seems more robust is to give
pushJsonbValue the responsibility of building the JsonbValue tree
in a specified non-current memory context. The previous patch
created the infrastructure for that, and this patch simply makes
the aggregate functions use it and then rips out phases 2 and 3.
For me, this makes jsonb_agg() with a text column as input run
about 2X faster than before. It's not yet on par with json_agg(),
but this removes a whole lot of the difference.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/1060917.1753202222@sss.pgh.pa.us
|
|
Instead of passing "JsonbParseState **" to pushJsonbValue(),
pass a pointer to a JsonbInState, which will contain the
parseState stack pointer as well as other useful fields.
Also, instead of returning a JsonbValue pointer that is often
meaningless/ignored, return the top-level JsonbValue pointer
in the "result" field of the JsonbInState.
This involves a lot of (mostly mechanical) edits, but I think
the results are notationally cleaner and easier to understand.
Certainly the business with sometimes capturing the result of
pushJsonbValue() and sometimes not was bug-prone and incapable of
mechanical verification. In the new arrangement, JsonbInState.result
remains null until we've completed a valid sequence of pushes, so
that an incorrect sequence will result in a null-pointer dereference,
not mistaken use of a partial result.
However, this isn't simply an exercise in prettier notation.
The real reason for doing it is to provide a mechanism whereby
pushJsonbValue() can be told to construct the JsonbValue tree
in a context that is not CurrentMemoryContext. That happens
when a non-null "outcontext" is specified in the JsonbInState.
No callers exercise that option in this patch, but the next
patch in the series will make use of it.
I tried to improve the comments in this area too.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/1060917.1753202222@sss.pgh.pa.us
|
|
Various places that were using StringInfo but didn't need that
StringInfo to exist beyond the scope of the function were using
makeStringInfo(), which allocates both a StringInfoData and the buffer it
uses as two separate allocations. It's more efficient for these cases to
use a StringInfoData on the stack and initialize it with initStringInfo(),
which only allocates the string buffer. This also simplifies the cleanup,
in a few cases.
Author: Mats Kindahl <mats.kindahl@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/4379aac8-26f1-42f2-a356-ff0e886228d3@gmail.com
|
|
Commit 3c152a27b06 mistakenly repeated JSONTYPE_JSON in a condition,
omitting JSONTYPE_CAST. As a result, datum_to_jsonb_internal() failed
to reject inputs that were casts (e.g., from an enum to json as in the
example below) when used as keys in JSON constructors.
This led to a crash in cases like:
SELECT JSON_OBJECT('happy'::mood: '123'::jsonb);
where 'happy'::mood is implicitly cast to json. The missing check
meant such casted values weren’t properly rejected as invalid
(non-scalar) JSON keys.
Reported-by: Maciek Sakrejda <maciek@pganalyze.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Maciek Sakrejda <maciek@pganalyze.com>
Discussion: https://postgr.es/m/CADXhmgTJtJZK9A3Na_ry+Xrq-ghjcejBRhcRMzWZvbd__QdgJA@mail.gmail.com
Backpatch-through: 17
|
|
Formerly, these cases threw an error "cannot cast jsonb null to type
<whatever>". That seems less than helpful though. It's also
inconsistent with the behavior of the ->> operator, which translates
JSON null to SQL NULL, as do some other jsonb functions.
Discussion: https://postgr.es/m/3851203.1722552717@sss.pgh.pa.us
|
|
Backpatch-through: 13
|
|
Many of them just seem to have been copied around for no real reason.
Their presence causes (small) risks of hiding actual type mismatches
or silently discarding qualifiers
Discussion: https://www.postgresql.org/message-id/flat/461ea37c-8b58-43b4-9736-52884e862820@eisentraut.org
|
|
There were quite a few places where we either had a non-NUL-terminated
string or a text Datum which we needed to call escape_json() on. Many of
these places required that a temporary string was created due to the fact
that escape_json() needs a NUL-terminated cstring. For text types, those
first had to be converted to cstring before calling escape_json() on them.
Here we introduce two new functions to make escaping JSON more optimal:
escape_json_text() can be given a text Datum to append onto the given
buffer. This is more optimal as it foregoes the need to convert the text
Datum into a cstring. A temporary allocation is only required if the text
Datum needs to be detoasted.
escape_json_with_len() can be used when the length of the cstring is
already known or the given string isn't NUL-terminated. Having this
allows various places which were creating a temporary NUL-terminated
string to just call escape_json_with_len() without any temporary memory
allocations.
Discussion: https://postgr.es/m/CAApHDvpLXwMZvbCKcdGfU9XQjGCDm7tFpRdTXuB9PVgpNUYfEQ@mail.gmail.com
Reviewed-by: Melih Mutlu, Heikki Linnakangas
|
|
This introduces the following SQL/JSON functions for querying JSON
data using jsonpath expressions:
JSON_EXISTS(), which can be used to apply a jsonpath expression to a
JSON value to check if it yields any values.
JSON_QUERY(), which can be used to to apply a jsonpath expression to
a JSON value to get a JSON object, an array, or a string. There are
various options to control whether multi-value result uses array
wrappers and whether the singleton scalar strings are quoted or not.
JSON_VALUE(), which can be used to apply a jsonpath expression to a
JSON value to return a single scalar value, producing an error if it
multiple values are matched.
Both JSON_VALUE() and JSON_QUERY() functions have options for
handling EMPTY and ERROR conditions, which can be used to specify
the behavior when no values are matched and when an error occurs
during jsonpath evaluation, respectively.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Author: Jian He <jian.universality@gmail.com>
Reviewers have included (in no particular order):
Andres Freund, Alexander Korotkov, Pavel Stehule, Andrew Alsup,
Erik Rijkers, Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby, Álvaro Herrera, Jian He, Anton A. Melnikov,
Nikita Malakhov, Peter Eisentraut, Tomas Vondra
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqHROpf9e644D8BRqYvaAPmgBZVup-xKMDPk-nd4EpgzHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
|
|
destroyStringInfo() is a counterpart to makeStringInfo(), freeing a
palloc'd StringInfo and its data. This is a convenience function to
align the StringInfo API with the PQExpBuffer API. Originally added
in the OAuth patchset, it was extracted and committed separately in
order to aid upcoming JSON work.
Author: Daniel Gustafsson <daniel@yesql.se>
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAOYmi+mWdTd6ujtyF7MsvXvk7ToLRVG_tYAcaGbQLvf=N4KrQw@mail.gmail.com
|
|
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
This excludes any changes that would change the external AM APIs.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/14c31f4a-0347-0805-dce8-93a9072c05a5%40eisentraut.org
|
|
Previously, the JSON code didn't have to worry too much about freeing
JsonLexContext, because it was never too long-lived. With new features
being added for SQL/JSON this is no longer the case. Add a routine
that knows how to free this struct and apply that to a few places, to
prevent this from becoming problematic.
At the same time, we change the API of makeJsonLexContextCstringLen to
make it receive a pointer to JsonLexContext for callers that want it to
be stack-allocated; it can also be passed as NULL to get the original
behavior of a palloc'ed one.
This also causes an ABI break due to the addition of flags to
JsonLexContext, so we can't easily backpatch it. AFAICS that's not much
of a problem; apparently some leaks might exist in JSON usage of
text-search, for example via json_to_tsvector, but I haven't seen any
complaints about that.
Per Coverity complaint about datum_to_jsonb_internal().
Discussion: https://postgr.es/m/20230808174110.oq3iymllsv6amkih@alvherre.pgsql
|
|
This Patch introduces three SQL standard JSON functions:
JSON()
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values,
and has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value,
including json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis
or represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Catversion bumped as this changes ruleutils.c.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby, Álvaro Herrera,
Peter Eisentraut
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
|
|
This is to export datum_to_json(), datum_to_jsonb(), and
jsonb_from_cstring(), though the last one is exported as
jsonb_from_text().
A subsequent commit to add new SQL/JSON constructor functions will
need them for calling from the executor.
Discussion: https://postgr.es/m/20230720160252.ldk7jy6jqclxfxkq%40alvherre.pgsql
|
|
This essentially removes the JsonbTypeCategory enum and
jsonb_categorize_type() and integrates any jsonb-specific logic that
was in jsonb_categorize_type() into json_categorize_type(), now
moved to jsonfuncs.c. The remaining JsonTypeCategory enum and
json_categorize_type() cover the needs of the callers in both json.c
and jsonb.c. json_categorize_type() has grown a new parameter named
is_jsonb for callers to engage the jsonb-specific behavior of
json_categorize_type().
One notable change in the now exported API of json_categorize_type()
is that it now always returns *outfuncoid even though a caller may
have no need currently to see one.
This is in preparation of later commits to implement additional
SQL/JSON functions.
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
|
|
This commit introduces the SQL/JSON standard-conforming constructors for
JSON types:
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
Most of the functionality was already present in PostgreSQL-specific
functions, but these include some new functionality such as the ability
to skip or include NULL values, and to allow duplicate keys or throw
error when they are found, as well as the standard specified syntax to
specify output type and format.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/CAF4Au4w2x-5LTnN_bxky-mq4=WOqsGsxSpENCzHRAzSnEd8+WQ@mail.gmail.com
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
|
|
This adjusts a few places which were appending a string constant
containing spaces onto a StringInfo. We have appendStringInfoSpaces for
that job, so let's use that instead.
For the change to jsonb.c's add_indent() function, appendStringInfoString
was being called inside a loop to append 4 spaces on each loop. This
meant that enlargeStringInfo would get called once per loop. Here it
should be much more efficient to get rid of the loop and just calculate
the number of spaces with "level * 4" and just append all the spaces in
one go.
Here we additionally adjust the appendStringInfoSpaces function so it
makes use of memset rather than a while loop to apply the required spaces
to the StringInfo. One of the problems with the while loop was that it
was incrementing one variable and decrementing another variable once per
loop. That's more work than what's required to get the job done. We may
as well use memset for this rather than trying to optimize the existing
loop. Some testing has shown memset is faster even for very small sizes.
Discussion: https://postgr.es/m/CAApHDvp_rKkvwudBKgBHniNRg67bzXVjyvVKfX0G2zS967K43A@mail.gmail.com
|
|
Backpatch-through: 11
|
|
This requires a bit of further infrastructure-extension to allow
trapping errors reported by numeric_in and pg_unicode_to_server,
but otherwise it's pretty straightforward.
In the case of jsonb_in, we are only capturing errors reported
during the initial "parse" phase. The value-construction phase
(JsonbValueToJsonb) can also throw errors if assorted implementation
limits are exceeded. We should improve that, but it seems like a
separable project.
Andrew Dunstan and Tom Lane
Discussion: https://postgr.es/m/3bac9841-fe07-713d-fa42-606c225567d6@dunslane.net
|
|
Formerly, semantic action functions for the JSON parser returned void,
so that there was no way for them to affect the parser's behavior.
That means in particular that they can't force an error exit except by
longjmp'ing. That won't do in the context of our project to make input
functions return errors softly. Hence, change them to return the same
JsonParseErrorType enum value as the parser itself uses. If an action
function returns anything besides JSON_SUCCESS, the parse is abandoned
and that error code is returned.
Action functions can thus easily return the same error conditions that
the parser already knows about. As an escape hatch for expansion, also
invent a code JSON_SEM_ACTION_FAILED that the core parser does not know
the exact meaning of. When returning this code, an action function
must use some out-of-band mechanism for reporting the error details.
This commit simply makes the API change and causes all the existing
action functions to return JSON_SUCCESS, so that there is no actual
change in behavior here. This is long enough and boring enough that
it seemed best to commit it separately from the changes that make
real use of the new mechanism.
In passing, remove a duplicate assignment of
transform_string_values_scalar.
Discussion: https://postgr.es/m/1436686.1670701118@sss.pgh.pa.us
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
|
|
The reverts the following and makes some associated cleanups:
commit f79b803dc: Common SQL/JSON clauses
commit f4fb45d15: SQL/JSON constructors
commit 5f0adec25: Make STRING an unreserved_keyword.
commit 33a377608: IS JSON predicate
commit 1a36bc9db: SQL/JSON query functions
commit 606948b05: SQL JSON functions
commit 49082c2cc: RETURNING clause for JSON() and JSON_SCALAR()
commit 4e34747c8: JSON_TABLE
commit fadb48b00: PLAN clauses for JSON_TABLE
commit 2ef6f11b0: Reduce running time of jsonb_sqljson test
commit 14d3f24fa: Further improve jsonb_sqljson parallel test
commit a6baa4bad: Documentation for SQL/JSON features
commit b46bcf7a4: Improve readability of SQL/JSON documentation.
commit 112fdb352: Fix finalization for json_objectagg and friends
commit fcdb35c32: Fix transformJsonBehavior
commit 4cd8717af: Improve a couple of sql/json error messages
commit f7a605f63: Small cleanups in SQL/JSON code
commit 9c3d25e17: Fix JSON_OBJECTAGG uniquefying bug
commit a79153b7a: Claim SQL standard compliance for SQL/JSON features
commit a1e7616d6: Rework SQL/JSON documentation
commit 8d9f9634e: Fix errors in copyfuncs/equalfuncs support for JSON node types.
commit 3c633f32b: Only allow returning string types or bytea from json_serialize
commit 67b26703b: expression eval: Fix EEOP_JSON_CONSTRUCTOR and EEOP_JSONEXPR size.
The release notes are also adjusted.
Backpatch to release 15.
Discussion: https://postgr.es/m/40d2c882-bcac-19a9-754d-4299e1d87ac7@postgresql.org
|
|
There were many calls to construct_array() and deconstruct_array() for
built-in types, for example, when dealing with system catalog columns.
These all hardcoded the type attributes necessary to pass to these
functions.
To simplify this a bit, add construct_array_builtin(),
deconstruct_array_builtin() as wrappers that centralize this hardcoded
knowledge. This simplifies many call sites and reduces the amount of
hardcoded stuff that is spread around.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/2914356f-9e5f-8c59-2995-5997fc48bcba%40enterprisedb.com
|
|
Run pgindent, pgperltidy, and reformat-dat-files.
I manually fixed a couple of comments that pgindent uglified.
|
|
These are to keep Coverity happy. In one case remove a redundant NULL
check, and in another explicitly ignore a function result that is already
known.
|
|
These are useless and distracting. We wouldn't have written the code
with them to begin with, so there's no reason to keep them.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Discussion: https://postgr.es/m/attachment/133167/0016-Extraneous-blank-lines.patch
|
|
This Patch introduces three SQL standard JSON functions:
JSON() (incorrectly mentioned in my commit message for f4fb45d15c)
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values, and
has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value, including
json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis or
represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
|
|
This introduces the SQL/JSON functions for querying JSON data using
jsonpath expressions. The functions are:
JSON_EXISTS()
JSON_QUERY()
JSON_VALUE()
All of these functions only operate on jsonb. The workaround for now is
to cast the argument to jsonb.
JSON_EXISTS() tests if the jsonpath expression applied to the jsonb
value yields any values. JSON_VALUE() must return a single value, and an
error occurs if it tries to return multiple values. JSON_QUERY() must
return a json object or array, and there are various WRAPPER options for
handling scalar or multi-value results. Both these functions have
options for handling EMPTY and ERROR conditions.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
|
|
This patch introduces the SQL/JSON standard constructors for JSON:
JSON()
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
For the most part these functions provide facilities that mimic
existing json/jsonb functions. However, they also offer some useful
additional functionality. In addition to text input, the JSON() function
accepts bytea input, which it will decode and constuct a json value from.
The other functions provide useful options for handling duplicate keys
and null values.
This series of patches will be followed by a consolidated documentation
patch.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
|
|
Backpatch-through: 10
|
|
Backpatch-through: 9.5
|
|
This patch adds the pseudo-types anycompatible, anycompatiblearray,
anycompatiblenonarray, and anycompatiblerange. They work much like
anyelement, anyarray, anynonarray, and anyrange respectively, except
that the actual input values need not match precisely in type.
Instead, if we can find a common supertype (using the same rules
as for UNION/CASE type resolution), then the parser automatically
promotes the input values to that type. For example,
"myfunc(anycompatible, anycompatible)" can match a call with one
integer and one bigint argument, with the integer automatically
promoted to bigint. With anyelement in the definition, the user
would have had to cast the integer explicitly.
The new types also provide a second, independent set of type variables
for function matching; thus with "myfunc(anyelement, anyelement,
anycompatible) returns anycompatible" the first two arguments are
constrained to be the same type, but the third can be some other
type, and the result has the type of the third argument. The need
for more than one set of type variables was foreseen back when we
first invented the polymorphic types, but we never did anything
about it.
Pavel Stehule, revised a bit by me
Discussion: https://postgr.es/m/CAFj8pRDna7VqNi8gR+Tt2Ktmz0cq5G93guc3Sbn_NVPLdXAkqA@mail.gmail.com
|
|
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
|
|
To make this work, (1) makeJsonLexContextCstringLen now takes the
encoding to be used as an argument; (2) check_stack_depth() is made to
do nothing in frontend code, and (3) elog(ERROR, ...) is changed to
pg_log_fatal + exit in frontend code.
Mark Dilger, reviewed and slightly revised by me.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
|
|
Specifically, move those functions that depend on ereport()
from jsonapi.c to jsonfuncs.c, in preparation for allowing
jsonapi.c to be used from frontend code.
A few cases where elog(ERROR, ...) is used for can't-happen
conditions are left alone; we can handle those in some other
way in frontend code.
Reviewed by Mark Dilger and Andrew Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
|
|
Instead, it now returns a value indicating either success or the
type of error which occurred. The old behavior is still available
by calling pg_parse_json_or_ereport(). If the new interface is
used, an error can be thrown by passing the return value of
pg_parse_json() to json_ereport_error().
pg_parse_json() can still elog() in can't-happen cases, but it
seems like that issue is best handled separately.
Adjust json_lex() and json_count_array_elements() to return an
error code, too.
This is all in preparation for making the backend's json parser
available to frontend code.
Reviewed and/or tested by Mark Dilger and Andrew Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
Similar to commits 7e735035f2 and dddf4cdc33, this commit makes the order
of header file inclusion consistent for backend modules.
In the passing, removed a couple of duplicate inclusions.
Author: Vignesh C
Reviewed-by: Kuntal Ghosh and Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
|
|
SQL/JSON standard allows manipulation with datetime values. So, it appears to
be convinient to allow datetime values to be represented in JsonbValue struct.
These datetime values are allowed for temporary representation only. During
serialization datetime values are converted into strings.
SQL/JSON requires writing timestamps with timezone in the same timezone offset
as they were parsed. This is why we allow storage of timezone offset in
JsonbValue struct. For the same reason timezone offset argument is added to
JsonEncodeDateTime() function.
Extracted from original patch by Nikita Glukhov, Teodor Sigaev, Oleg Bartunov.
Revised by me. Comments were adjusted by Liudmila Mantrova.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Discussion: https://postgr.es/m/CAPpHfdsZgYEra_PeCLGNoXOWYx6iU-S3wF8aX0ObQUcZU%2B4XTw%40mail.gmail.com
Author: Nikita Glukhov, Teodor Sigaev, Oleg Bartunov, Alexander Korotkov, Liudmila Mantrova
Reviewed-by: Anastasia Lubennikova, Peter Eisentraut
|
|
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
|
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
|
|
... for translatability purposes.
|
|
SQL 2016 standards among other things contains set of SQL/JSON features for
JSON processing inside of relational database. The core of SQL/JSON is JSON
path language, allowing access parts of JSON documents and make computations
over them. This commit implements partial support JSON path language as
separate datatype called "jsonpath". The implementation is partial because
it's lacking datetime support and suppression of numeric errors. Missing
features will be added later by separate commits.
Support of SQL/JSON features requires implementation of separate nodes, and it
will be considered in subsequent patches. This commit includes following
set of plain functions, allowing to execute jsonpath over jsonb values:
* jsonb_path_exists(jsonb, jsonpath[, jsonb, bool]),
* jsonb_path_match(jsonb, jsonpath[, jsonb, bool]),
* jsonb_path_query(jsonb, jsonpath[, jsonb, bool]),
* jsonb_path_query_array(jsonb, jsonpath[, jsonb, bool]).
* jsonb_path_query_first(jsonb, jsonpath[, jsonb, bool]).
This commit also implements "jsonb @? jsonpath" and "jsonb @@ jsonpath", which
are wrappers over jsonpath_exists(jsonb, jsonpath) and jsonpath_predicate(jsonb,
jsonpath) correspondingly. These operators will have an index support
(implemented in subsequent patches).
Catversion bumped, to add new functions and operators.
Code was written by Nikita Glukhov and Teodor Sigaev, revised by me.
Documentation was written by Oleg Bartunov and Liudmila Mantrova. The work
was inspired by Oleg Bartunov.
Discussion: https://postgr.es/m/fcc6fc6a-b497-f39a-923d-aa34d0c588e8%402ndQuadrant.com
Author: Nikita Glukhov, Teodor Sigaev, Alexander Korotkov, Oleg Bartunov, Liudmila Mantrova
Reviewed-by: Tomas Vondra, Andrew Dunstan, Pavel Stehule, Alexander Korotkov
|
|
Backpatch-through: certain files through 9.4
|
|
|
|
Initial variant of error message didn't follow style of another casting error
messages and wasn't informative. Per gripe from Robert Haas.
Reviewer: Tom Lane
Discussion: https://www.postgresql.org/message-id/flat/CA%2BTgmob08StTV9yu04D0idRFNMh%2BUoyKax5Otvrix7rEZC8rMw%40mail.gmail.com#CA+Tgmob08StTV9yu04D0idRFNMh+UoyKax5Otvrix7rEZC8rMw@mail.gmail.com
|
