Using powershell object to execute scripts

Question

Powershell version used: 3.0

Hello everyone,

I'm looking to try and create a new Powershell pipeline and execute a script within it, then get the output it produces into an output variable, but I can't get any output produced from within the object (from the executed script). The whole point of this is so I don't have to manage the $Error object, which I intend to use for error detection. Here's an example below:

$ps = [Powershell]::Create()

$File = ".\Test2.ps1"
$SortedParams = "-Name blah -Key foo"
$RootDirectory = Get-Location
$ExecutionDirectory = "$RootDirectory\Test3"

$ps.AddCommand("Set-Location").AddParameter("Path", "$ExecutionDirectory")
write-host "COMMAND 1: " $ps.Commands.Commands.Item(0).CommandText

$ps.AddScript("$File $SortedParams")
write-host "COMMAND 2: " $ps.Commands.Commands.Item(1).CommandText

$output = $ps.Invoke()

write-host $output

I should mention that I'm trying to use the following 3 methods of producing output within the script executed:

Write-Host
Write-Output
Write-Verbose (used $ps.Streams.Verbose to try to get output, but nothing)

Any suggestions or tips you can give is much appreciated!

mikekol · Accepted Answer · 2013-08-16 18:44:42Z

2

Unless you feel there's a specific need to do things the way you're doing them, you might want to look into using PowerShell background jobs instead.

Background jobs allow you to run PowerShell commands in a separate PowerShell instance and then collect the output from those jobs into a variable (if that's what you want to do).

Check out the about_Jobs help topic for more information.

Here's a quick example:

$job = Start-Job -ScriptBlock { "Hello World!" }
$ret = Receive-Job $job -Wait -AutoRemoveJob

# value of $ret will be "Hello World!"

answered Aug 16, 2013 at 18:44

mikekol

1,87213 silver badges14 bronze badges

Sign up to request clarification or add additional context in comments.

8 Comments

cloud_hero Over a year ago

Thanks mikekol! I attempted to use this logic and it seems that what gets returned is the command itself, rather than the output produced from my scripts.

mikekol Over a year ago

Can you post your code? That's not what I would expect to have happened, so seeing the code you're executing will make it easier to understand exactly what's happening.

cloud_hero Over a year ago

Code is as follows:

$job = Start-Job -ScriptBlock { ".\Test2.ps1 -Name "blah" -Key "foo"" }     $ret = Receive-Job $job -Wait -AutoRemoveJob          Write-host "OUTPUT: " $ret

Due to formatting issues here, I had to take out two of the 'tick marks' near the double quotes.

mikekol Over a year ago

There we go. The reason you're just getting the command back is because it's enclosed in double-quotes, making PowerShell think that you're just placing a string literal into the pipeline. If you change the scriptblock to be { .\Test2.ps1 -Name "blah" -Key "foo" }, that will get you closer to what you're looking for. You may also want to supply the fully-qualified path to the script you want to run, since the job may not be running in the same folder that your current PowerShell session is in.

cloud_hero Over a year ago

Great, thanks for that! That formatting issue fixed up the logic a bit, but when I run this, it still remains in the same directory: $job = Start-Job -ScriptBlock { Set-Location "$ExecutionDirectory"; Get-Location }

|

Colyn1337 · Accepted Answer · 2013-08-16 18:37:11Z

0

You can call another script with the Invoke-Expression cmdlet and capture its output using the -OutVariable parameter. I recommend using the Out-Null so that data doesn't populate to the console twice, feel free to remove that piped command. Here's an example:

Invoke-Expression -Command "c:\EventLog.ps1" -OutVariable $data | Out-Null

Write-Host $data

This is the code from the sample script I used in the above example:

Param($ComputerName = ".")

Get-EventLog -ComputerName $ComputerName -Log application -EntryType Error | 
    Group-Object -Property source | 
    Sort-Object -Property Count -Descending | 
    Format-Table Count, Name -AutoSize

answered Aug 16, 2013 at 18:37

Colyn1337

1,7232 gold badges18 silver badges28 bronze badges

3 Comments

cloud_hero Over a year ago

Thanks for the reply Colyn1337! However, I was intentionally trying to avoid calling my scripts from my current execution pipeline so I wouldn't have to clean up the $Error object, should I choose to manually execute this script. This is actually a similar implementation that I was using previously. I will consider using this though if I cannot find a solution to my current implementation!

Colyn1337 Over a year ago

Tell me more about what you're trying to accomplish. I might be able to help further :]

cloud_hero Over a year ago

Basically, I'm trying to accomplish 3 things: - Call a script - Execute commands - Pass output of commands back to main script for logging I'm intentionally trying to avoid directly pushing the output to a log file in each script. I'm trying to collect all output within a single script and then log the output to a log file. I should also mention that I don't want this to execute from the current pipeline, so I don't have to manage the $Error variable cleanup.

Andy Arismendi · Accepted Answer · 2013-08-20 06:23:44Z

0

Check your error stream for errors:

$ps.Streams.Error

This worked for me:

$ps = [Powershell]::Create()
cd 'C:\Users\Andy\Documents'
$File = ".\Test2.ps1"
$SortedParams = "-Name blah -Key foo"
$RootDirectory = Get-Location
$ExecutionDirectory = "$RootDirectory\Test3"
$ps.AddCommand("Set-Location").AddParameter("Path", "$ExecutionDirectory") | Out-Null
$ps.AddScript("$File $SortedParams") | Out-Null
$output = $ps.Invoke()
write-host $output

This shows my setup:

Show file organization:

Command: 

tree.com /F /A $ExecutionDirectory

Output: 

C:\USERS\ANDY\DOCUMENTS\TEST3
    Test2.ps1

Show script contents:

Command:

cat "$ExecutionDirectory\Test2.ps1"

Output: 

param (
    $Name,
    $Key
)
$Name
$Key

answered Aug 20, 2013 at 6:23

Andy Arismendi

53.2k17 gold badges113 silver badges130 bronze badges

Comments

Juan Antonio Tubío · Accepted Answer · 2015-03-11 20:03:11Z

0

I'm using Invoke-Expression and this is the only solution working for me:

test2.ps

Invoke-Expression .\test1.ps1 | Tee-Object -Variable msg | Out-Null
write-host "Return: $msg"</code>

And test1.ps:

$hola="Testing"
$hola

Call:

C:\Test>powershell -ExecutionPolicy unrestricted -file test2.ps1
Return: Testing

answered Mar 11, 2015 at 20:03

Juan Antonio Tubío

1,25116 silver badges29 bronze badges

Collectives™ on Stack Overflow

Using powershell object to execute scripts

4 Answers 4

8 Comments

3 Comments

Comments

Comments

Your Answer

Hot Network Questions

Collectives™ on Stack Overflow

4 Answers 4

8 Comments

3 Comments

Comments

Comments

Your Answer

Sign up or log in

Post as a guest

Related